GOST 23343-78
ГОСТ 23343-78
|
|
Primer ГФ-0119. Specifications
Грунтовка ГФ-0119. Технические условия
Status: Effective - Introduced for the first time. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard applies to the primer GF-0119, which is a suspension of pigments and fillers in alkyd varnish, with the addition of solvents, desiccant and stabilizing substances.
Стандарт распространяется на грунтовку ГФ-0119, представляющую собой суспензию пигментов и наполнителей в алкидном лаке, с добавлением растворителей, сиккатива и стабилизирующих веществ.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/9/1978
SKU: RUSS20343
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L25 Organic solvents, drying oils, primers »
The Document References:
GOST 10054-82: Water-resistant abrasive paper
GOST 10214-78: Petroleum solvent. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.018-93: Fire and explosion safety of static electricity. General requirements.
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.3.005-75: Painting works
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 13345-85: Tin-plate and black plate
GOST 14192-96: Cargo marking
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18187-72: Solvents of РЭ type for electrocoating. Specifications
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 1928-79: Coal solvent. Specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 3134-78: White spirit
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5406-84: Enamels НЦ-25. Specifications
GOST 6456-82: Abrasive paper
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6613-86: Square meshed woven wire gauzes
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9198-83: Enamels of types НЦ-11 and НЦ-11А. Specifications
GOST 9410-78: Petroleum xylol. Specifications
GOST 9949-76: Coal xylene. Specifications
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.4-86: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
The Document is Referenced By:
Application manual SP 12.13130.2009: The manual on the application of SP 12.13130.2009 "Definition of categories of premises, buildings and outdoor installations for explosion and fire hazard"
GOST 10277-90: Putties. Specifications
GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 18335-83: Enamel НЦ-184. Specifications
GOST 21133-75: Specialized box pallets for potatoes, vegetables, fruits, melons and gourds. Specification
GOST 21824-76: Enamels Xc-119 And Xc-119e Specifications
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 23173-78: Garden barrows. General technical conditions
GOST 2361-74: Limiters for cases flap covers. Specifications
GOST 25483-95: Garden watering pots
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 31311-2005: Heating devices. General specifications
GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications
GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications
GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications
GOST 6993-79: Enamels HV-1100. Specification
GOST 7313-75: Enamels ХВ-785 and lacquer XB-784. Specifications
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST R 52018-2003: Shaft sinking hoppets. Specifications
GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
OST 26-04-1035-74: Assembling units and fastening details of cold pipelines with a diameter from 100 to 1020 mm. Design and dimensions.
OST 26-04-1036-74: Assembling units and fastening details of warm pipelines with a diameter from 100 to 1020 mm. Design and dimensions.
OST 26-04-1038-74: Assembling units and fastening details of pipes with a diameter from 6 to 10 mm. Design and dimensions.
OST 26-04-1039-74: Parts for mounting pipes with a diameter from 6 to 95 mm. Design and dimensions
OST 26-04-1041-74: Support for t warm-air pipelines with diameter from 325 to 1020 mm. Design and dimensions.
OST 26-04-1042-74: Bearing carbon steel for cold pipes with diameters from 250 to 1020 mm. Design and dimensions..
OST 26-04-1043-74: Support of high-alloy r steel for cold pipes. Design and dimensions.
RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions
RD 34.10.353: Specified Quantity Allowances for Materials for Repair of Electric Motors
RD 36-62-00: Hoisting equipment. General technical requirements.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
TsPI 6/32: Technological indications of the coloring of metal structures of railway bridges in operation
TU 102-416-86: Garage reinforced concrete prefabricated for individual use
TU 102-461-88: Garage reinforced concrete prefabricated box single and double row collective use
TU 102-587-91: Production-auxiliary box
TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use
TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions
TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions
TU 24-09.411-82: Special electric bridge cranes
TU 24-09-613-84: Electric overhead traveling cranes with a lifting capacity of 5 tons of lightweight construction with electric hoist
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants
VSN 362-87: Disinfections and Etching of Pipelines
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.