GOST R 52719-2007

ГОСТ Р 52719-2007

Power transformers. General specifications

Трансформаторы силовые. Общие технические условия

Status: Effective - Introduced for the first time

The standard applies to power transformers of general purpose, including autotransformers, auxiliary transformers of power plants and transformers for complete transformer substations, three-phase power not less than 5 kV • A and single-phase power not less than 1 kV • A voltage classes up to 1150 kV inclusive, for the needs of the economy of the country. The standard applies to equipment developed after January 1, 2008. The standard does not apply to low power transformers and special transformers (converter, electric furnaces, traction, start-up, welding, etc.), as well as transformers with more than three windings. The requirements of the standard can be fully or partially applied to these transformers, if they do not have separate regulatory documents.

Стандарт распространяется на силовые трансформаторы общего назначения, в том числе на автотрансформаторы, трансформаторы собственных нужд электростанций и трансформаторы для комплектных трансформаторных подстанций, трехфазные мощностью не менее 5 кВ • А и однофазные мощностью не менее 1 кВ • А классов напряжения до 1150 кВ включительно, предназначенные для нужд экономики страны. Стандарт распространяется на оборудование, разработанное после 1 января 2008 г. Стандарт не распространяется на трансформаторы малой мощности и специальные трансформаторы (преобразовательные, электропечные, тяговые, пусковые, сварочные и др.), а также трансформаторы с числом обмоток более трех. Требования стандарта могут полностью или частично применяться для этих трансформаторов, если на них нет отдельных нормативных документов.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 47

Approved: Federal Agency for Technical Regulation and Metrology, 4/9/2007

SKU: RUSS20355

Price: $223.74

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.1 Electric machines, electrical equipment and materials »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.180 Transformers. Reactors »

National standards » 29 ELECTRICAL ENGINEERING » 29.180 Transformers. Reactors »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E6 Electric machines, transformers and converters » E64 Transformers »

The Document References:

GOST 10434-82: Electric contact connections. Classification. General technical requirements

GOST 10693-81: Hermetic capacitor bushings designed for rated voltages 110 kv and more

GOST 12.1.004-91: Fire safety. General requirements

GOST Occupation safety standards system Electrical equipment. General safety requirements

GOST Occupation safety standards system. Power transformers and reactors. Safety requirements

GOST 12.2.024-87: Noise. Power oil-immersed transformers.

GOST 13109-97: Electric energy. Electromagnetic compatibility of technical equipment. Power quality limits in public electrical systems

GOST 14192-96: Cargo marking

GOST 14209-85: Oil-immersed general-purpose power transformers. Permissible loads

GOST 14209-97: Loading guide for oil-immersed power transformers

GOST 14254-80: Electrotechnical articles. Enclosures. Degrees of protections. Designations. Test methods

GOST 14254-96: Degrees of protection provided by enclosures (IP Code)

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 16110-82: Power transformers. Terms and definitions

GOST 17516.1-90: Electrical articles. General requirement for environment mechanical stability

GOST 18620-86: Electrotechnical articles

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 20243-74: Power transformers. Methods of short-circuit tests

GOST 21023-75: Power transformers. Methods of measuring partial discharge characteristics during power frequency voltage testing

GOST 21128-83: Power supply systems, nets, sources, converters and receivers of electric energy. Rated voltages to 1000 V

GOST 21130-75: Electrical articles. Grounding terminals and grounding signs

GOST 22756-77: Power and voltage transformers and reactors. Test methods of electric insulation strength

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23865-79: Condenser sealed bushings for nominal voltages 110 kW and higher. Types and sizes

GOST 24126-80: Power transformer on-load tap-changing devices. General specifications

GOST 30830-2002: Power transformers. Part 1. General

GOST 3484.1-88: Power transformers. Electromagnetic test methods

GOST 3484.2-88: Power transformers. Heating tests

GOST 3484.3-88: Power transformers. Measuring methods of dielectric parameters of insulation

GOST 3484.4-88: Power transformers. Tank tests for strength

GOST 3484.5-88: Power transformers. Tank tests for leakages

GOST 721-77: Power supply systems, networks, sources,converters and receivers of electric energy. Rated voltages above 1000 V

GOST 7746-2001: Current transformers. General specifications

GOST 8865-93: Electrical insulation system. Thermal evalution and classification

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9680-77: Power transformers from 0,01 kV x A and above. Series of power ratings

GOST 982-80: Transformer oils

GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 51685-2000: Railway rails. General specifications.

GOST R ISO 9001-2001: Quality management systems. Requirements

Federal Law 184-FZ: About technical regulation

GOST 13109-87: Electric energy. Requirements for quality of electric energy in general-purpose networks

The Document is Referenced By:

GOST 33324-2015: Traction transformers and inductors on board railway rolling stock. Basic parameters and test methods

GOST R 54801-2011: Traction transformers and inductors on board railway rolling stock. Basic parameters and test methods

GOST R 54827-2011: Dry-type transformers. General specifications

GOST R 55014-2012: Power transformers. Tests for mechanical strength of tanks

GOST R 55015-2012: Power transformers. Tanks leakage tests

GOST R 55016-2012: General-purpose 110 and 150 kW power oil transformers. Specifications

GOST R 55187-2012: Insulated bushings for alternating current rated voltages above 1000 V. Common specifications

GOST R 55188-2012: Power transformers. Ability to withstand short circuit

GOST R 55195-2012: Electrical equipment and installations for a.c. voltages from 1 up to 750 kV. Requirements for dielectric strength of insulation

GOST R 56738-2015: Power transformers and reactors. Requirements and methods for dielectric tests

GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

GOST R 57382-2017: United power system and isolated power systems. Electric power systems. Standardized sequence of nominal and highest operating voltages

GOST R 57670-2017: The railway track power supply systems. The methods of selecting fundamental parameters

PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements

SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation

SP 76.13330.2016: Electrical systems

GOST R 58408-2019: Electric networks of own needs and operating current of railway traction substations, transformer substations and linear devices of traction power supply system. Technical requirements, design rules, electrical calculation methods

GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements

RD EO Provisions on acceptance and testing form conformity assessment for nuclear plants.

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!