GOST R IEC 60204-1-99
ГОСТ Р МЭК 60204-1-99
|
|
Safety of machinery. Electrical equipment of machines. Part 1. General requirements
Безопасность машин. Электрооборудование машин и механизмов. Часть 1. Общие требования
Status: Not effective - Superseded. Registration information 499-ct dated 12/27/2007 (official website of Rosstandart); IUS 5-2008
The standard establishes requirements and recommendations for electrical equipment of industrial machines and mechanisms that ensure: - personnel and property safety; - consistency of reactions to the control action; - ease of maintenance.
Стандарт устанавливает требования и рекомендации к электрооборудованию промышленных машин и механизмов, обеспечивающие: - безопасность персонала и имущества; - согласованность реакций на управляющее воздействие; - легкость обслуживания.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/17/1999
SKU: RUSS20356
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.020 Electrical engineering in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G02 Norms of calculation and design »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Complete devices for voltages up to 1000 V »
The Document is Replaced With:
GOST R IEC 60204-1-2007: Safety of machinery. Electrical equipment of machines and mechanisms. Part 1. General requirements
The Document References:
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 21991-89: Electrotechnical equipment. Standard directions of movement for actuators which control the operation of electrical apparatus
GOST 28312-89: Radioelectronic equipment, professional. Conventional graphic designations
GOST 28763-90: Code for designation of colours
GOST 29149-91: Colours of indicator lights and push-buttons
GOST 30011.5-93: Low-voltage switchgear and control gear
GOST 30030-93: Isolating transformers and safety isolating transformers. Technical requirements
GOST 30331.2-95: Electrical installations of buildings. Part 3. General characteristics
GOST 30331.3-95: Electrical installations of buildings. Part 4. Protection for safety. Protection against electric shock
GOST 30331.7-95: Electrical installations of buildings. Part 4. Protection for safety. Insulation, switching off, control
GOST 30331.8-95: Electrical installations of buildings. Part 4. Protection for safety. Applisation of protective measues for safety. Measures of protection against electric shock
GOST 30331.9-95: Electrical installations of buildings. Part 4. Protection for safety. Measures of protection against overcurrent
GOST ISO/TO 12100-1-2001: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terms, procedure
GOST R 50020.3-92: Electrical installations for outdoor sites under heavy conditions (including open-cast mines and quarries). Part 3. General requirements for equipment and auxiliaries
GOST R 50030.2-99: Low-voltage switchgear and controlgear. Part 2. Circuit-breakers
GOST R 50030.3-99: Low -voltage switchgear and controlgear. Pat 3. Switchers, disconnectors, switch-disconnectors and fure-combination units
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST R 50030.5.1-99: Low-voltage switchgear and control gear. Part 5.1. Control circuit devices and switching elements. Electromechanical control circuit devices
GOST R 50030.7.1-2000: Low-voltage switchgear and controlgear. Part 7. Ancillary equipment. Section 1. Terminal blocks for copper conductors
GOST R 50339.0-2003: Low-voltage fuses. Part 1. General requirements
GOST R 50339.0-92: Low-voltage fuses. General requirements
GOST R 50345-99: Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations
GOST R 50462-92: Identification of conductors by colours or numerals
GOST R 50571.10-96: Electrical installations of buildings. Part 5. Selection and erection of electrical equipment. Chapter 54. Earthing arrangements and protective conductors
GOST R 50571.16-99: Electrical installations of buildings. Part 6. Verification. Chapter 61. Initial verification
GOST R 50571.2-94: Electrical installations of buildings. Part 3. General characteristics
GOST R 50571.7-94: Electrical installations of buildings. Part 4. Protection for safety. Isolation, switching off, control
GOST R 50571.9-94: Electrical installations of buildings. Part 4. Security requirements. Application of overcurrent protection measures
GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests
GOST R 51323.1-99: Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements
GOST R 51689-2000: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical reguirements
GOST R 51840-2001: Programmable controllers. General and functional characteristics
GOST R 51841-2001: Programmable controllers. General technical requirements and test methods
GOST R IEC 332-1-96: Test on cables under fire conditions. Test on a single vertical insulated wire or cable
GOST R IEC 536-94: Classification of electrical and electronic equipment with regard to protection against electric shock
GOST R IEC 60073-2000: Basic and safety principles for man-machine interfase, marking and identification. Coding principles for indication devices and actuators.
GOST R IEC 870-5-1-95: Telecontrol equipment and systems. Part 5. Transmission protocols. Section 1. Transmission frame formats
GOST R ISO/IEC 10536-2-2004: Identification cards. Contactless integrated circuit(s) cards. Part 2. Dimensions and location of coupling areas
The Document is Referenced By:
GOST 10580-2006: Technological foundry equipment. General specifications
GOST 12.2.007.9-93: Electric heating equipment safety
GOST 12.2.009-99: Metal-working machines. General safety requirements
GOST 12.2.017.4-2003: Sheet-bending presses. Safety requirements
GOST 12.2.026.0-93: Woodworking equipment safety requirements for design
GOST 12.2.029-88: Machine tool attachments
GOST 12.2.046.0-2004: Technological foundry еequipment. Safety requirements
GOST 12.2.072-98: Industrial robots. Robotized technological systems. Safety requirements and testing methods
GOST 12.2.116-2004: Three- and four-roller plate-bending machines. Safety requirements
GOST 12.2.124-90: The food industry equipment
GOST 21021-2000: Numerical control units. General technical requirements
GOST 30685-2000: Honing and lapping vertical machines. General specifications
GOST 30869-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
GOST 31177-2003: Safety of machinery. Safety requirements for fluid power systems and their components. Hydraulics
GOST 31335-2006: Technological foundry equipment. Equipment for shot shooting, shot blasting and shot shooting-blasting treatment. Safety requirements
GOST EN 1037-2002: Safety of machines. Prevention of unexpected start
GOST EN 418-2002: Safety of machines. Installation of emergency shut-down. Functions Design Philosophy
GOST ISO 12100-2013: Safety of machine tools. General principles for design. Risk assessment and risk reduction
GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements
GOST R 50571.27-2003: Electrical installations of buildings. Part 7-740. Requirements for special installations or locations. Temporary electrical installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses
GOST R 51333-99: Safety of machinery. Basic concepts, general principles for design. Basic terminology, technical principles and specifications
GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design
GOST R 51342-99: Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up
GOST R 51344-99: Safety of machinery. Principles for risk assessment
GOST R 51345-99: Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
GOST R 51689-2000: Rotating electrical machines. Asynchronous motors of power from 0,12 to 400 kW inclusive. General technical reguirements
GOST R 51754-2001: Machines and equipment for wood industrial low landings. Safety requirements. Control methods
GOST R 51837-2001: Electrical thermal equipment. General test methods
GOST R 51838-2001: Safety of machinery. Electrical equipment for industrial machines. Test methods
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 52615-2006: Compressors and vacuum pumps. Safety requirements. Part 2. Vacuum pumps
GOST R 52648-2006: Machines and equipment for timber floating. Safety requirements. Control methods of safety requirements
GOST R 52743-2007: Pumps and pump units for pumping of liquids. General safety requirements
GOST R 52744-2007: Submersible pumps and pump units. Safety requirements
GOST R 52776-2007: Rotating electrical machines. Rating and performance
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R 53130-2008: Safety of attractions. General requirements
GOST R 55226-2012: Gaseous hydrogen. Fuelling stations
GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process
GOST R EN 12717-2006: Safety of machine tools. Drilling machines
GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control
GOST R EN 12957-2007: Safety of metal-working machine tools. Electrodisharge machines
GOST R EN 13218-2006: Safety of machine-tools. Stationary grinding machines
GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines
GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting
GOST R EN 940-2009: Safety of woodworking machines. Combined woodworking machines
GOST R IEC 60073-2000: Basic and safety principles for man-machine interfase, marking and identification. Coding principles for indication devices and actuators.
GOST R IEC 60519-1-2005: Safety in electric heating equipment. Part 1. General requirements
GOST R ISO 11161-2010: Safety of machinery. Integrated manufacturing systems. Basic requirements
GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
