Metal structures. General technical requirements.
Конструкции металлические. Общие технические требования
Status: Not defined by law. In connection with the entry into force of the Federal Law of December 27, 2002 N 184-ФЗ "On Technical Regulation"
The standard applies to the construction of metal processing equipment used in the gas, oil and related industries, namely: - block-complete (frame, pipeline supports, service platforms, stairs, fences, etc.), - tubular and fired heaters direct heating (chimney pipes, gas ducts, air ducts, radiation chambers, convection chambers, adapters, service platforms, stairs, etc.), - chimney flue heaters with an intermediate heat carrier and fire evaporator . The standard establishes general technical requirements for the design, material, manufacture, acceptance of metal structures. The standard does not apply to ladders and platforms that are not included in the delivery of block-complete equipment for tubular furnaces and fire heaters, and are manufactured by a consumer or installation organization.
Стандарт распространяется на конструкции металлические технологического оборудования, применяемого в газовой, нефтяной и смежных отраслях промышленности, а именно: - блочно-комплектного (рамы, опоры трубопроводов, площадки обслуживания, лестницы, ограждения и т.д.), - печей трубчатых и огневых подогревателей прямого нагрева (трубы дымовые, газоходы, воздуховоды, камеры радиации, камеры конвекции, переходники, площадки обслуживания, лестницы и т.д.), - трубы дымовые огневых подогревателей с промежуточным теплоносителем и огневых испарителей. Стандарт устанавливает общие технические требования к проектированию, материалу, изготовлению, приемке конструкций металлических. Стандарт не распространяется на лестницы и площадки, не входящие в комплект поставки блочно-комплектного оборудования печей трубчатых и подогревателей огневых, и изготавливаемые потребителем или монтажной организацией
Format: Electronic (pdf/doc)
Page Count: 124
The Product is Contained in the Following Classifiers:
Construction (Max) »
Industry Standards and Specifications »
Industry standards »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.01 Equipment for oil and gas industry in general »
As a Replacement Of:
OST 26-02-758-79: Metal structures. General technical requirements.
The Document References:
GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types
GOST 10144-89: Enamels XB-124Specifications
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10877-76: Preservative oil K-17
GOST 10906-78: Square taper washers. Specifications
GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 11284-75: Through holes for fasteners. Dimensions
GOST 11371-78: Washers. Specifications
GOST 11474-76: Bent-steel sections. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.2.044-80: Occupational safety standards system. Machines and equipment for oil transportation. Safety requirements
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.009-76: Occupational safety standards system. Loading and unloading works General safety requirements
GOST 12169-82: Steel blanks for oxygen cutting. Allowances
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 13663-86: shaped steel pipes technical requirements
GOST 14192-96: Cargo marking
GOST 14249-89: Vessels and apparatus. Norms and methods of strength calculation
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 14792-80: Parts and work pieces made by oxygen and plasma arc cutting. Cut face accuracy and quality
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17435-72: Drawing rulers. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19537-83: Gun grease. Specifications
GOST 19903-74: Hot-rolled steel sheets. Dimensions
GOST 20072-74: Heat-resistant steel
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
GOST 22235-2010: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 2246-70: Welding steel wire. Specifications
GOST 23055-78: Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
GOST 23120-78: Steel flights of steps, stair landings and railings. Specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24297-87: Input inspection of products. General provisions.
GOST 25129-82: Primer GF-031. Specifications
GOST 25347-82: Basic norms of interchangeability. Unified system of tolerances and fits. Tolerance zones and recommendable fits
GOST 25348-82: Basic norms of interchangeability. Unified system of tolerances and fits. Series of tolerances, basic deviations and tolerance zones for sizes over 3150 mm
GOST 26020-83: Hot-rolled steel I-beam with parallel flange edges. Dimensions.
GOST 26179-84: Basic norms of interchangeability. Tolerances for sizes above 10000 up to 40000 mm
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 28759.1-90: Flanges of vessels and apparatus. Types and parameters
GOST 28759.5-90: Flanges of vessels and apparatuses
GOST 3242-79: Welded joints
GOST 380-50: Carbon steel, hot-rolled, of ordinary quality. Classification and general specifications
GOST 380-94: Normal quality carbon steel
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4543-71: Structural alloyed steel
GOST 5264-80: Manual are welding. Welding joints. Main types, design elements and dimensions
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 5494-95: Pigmentary aluminium. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5583-78: Industrial and medical gaseous oxygen
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8026-92: Levelling rules. Specifications
GOST 8050-85: Carbon dioxide,
GOST 8239-89: Steel hot-rolled I-beams
GOST 8240-97: Hot-rolled steel channels. Assortment
GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions
GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions
GOST 8568-77: Corrugated steet rhombic and lentil form steel. Technical requirements
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.402-80: Metal surface preparation for painting
GOST 9087-81: Welding melted fluxes
GOST 9109-81: Primers ФЛ-03k and ФЛ-03Ж. Specifications
GOST 926-82: Enamels ПФ-133. Specifications
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 9617-76: Vessels and apparatus. Series of diameters.
GOST R 51273-99: Vessels and apparatus. Norms and methods of strength calculation. Rated strength calculation of column type apparatus from wind loads and seismic influence
GOST R 51274-99: Vessels and Plant Equipment Column-Type Vessels Strength Calculation Standards and Methods
OST 26.291-87: Welded vessels and apparatus. General technical conditions
OST 26-02-758-79: Metal structures. General technical requirements.
OST 26-18-5-88: Technological units of gas and oil industry. General technical requirements.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
PB 03-273-99: Rules for qualification test of welders and welding production specialists
RD 08-200-98: Safety rules in the oil and gas industry
RD 24.031.17-88: Methodological instructions. Type selection and methods of calculation of I-beams and channels welded joints of s of stationary steam boilers steelworks.
RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.04.03-85: Protection of construction structures and facilities from corrosion
TU 36-26-11-5-89: Expanded steel sheets. Technical conditions
VSN 429-81/MMSS SSSR: Instruction for the design of lining for the industrial furnaces, made of refractory fibrous materials
The Document is Referenced By:
OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications
Customers Who Viewed This Item Also Viewed:
Technical regulations of the Eurasian Economic Union "On requirements for fire safety and fire extinguishing means"
Concrete with polysterene aggregates. Specifications
Steel welded vessels and apparatus. General technical conditions
Guidance on the selection of precautionary statements for the labelling in accordance with GOST 31340-2013
Billet of rotor shafts and rings of turbine generators
Vessels and apparatus. Norms and methods of strength calculation. Calculation of cylindrical and conical shells, convex and flat bottoms and covers
Seismic building design code
Aviation fuel for gas turbine engines JET A-1 (Jet A-1). Specifications
On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
Non-destructive testing. Fusion welding of metals. Welds classification by radiography testing results
Safety valves of stream and hot-water boilers. Technical requirements
Steam and hot-water boilers
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Buildings and structures foundations
Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
General requirements for machines, instruments and other industrial products as to environment mechanical stability
Safety rules for ground storage of liquid ammonia
Radio communications. Broadband wireless access equipment. Requirements for the radio spectrum parameters, electromagnetic compatibility and safety
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.