PNAE G-7-010-89

ПНАЭ Г-7-010-89

Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules

Оборудование и трубопроводы атомных энергетических установок. Сварные соединения и наплавки. Правила контроля

Status: Not effective - Not applicable. Order of the Federal Service for Ecological, Technological and Nuclear Supervision of December 29, 2018 No. 665

The control rules establish requirements for the control of welded joints and weld-on parts (assembly units, products) of equipment and pipelines of nuclear power plants, heat supply stations, combined heat and power plants, experimental and research nuclear reactors and installations covered by the AEU Rules. ПНАЭ Г-7-008- 89 ". The control rules are the guiding material for the design, construction, manufacture, installation of equipment and pipelines and establish the order, types, volumes and methods of control and standards for assessing the quality of welded joints and weld-on parts (products) made in accordance with the requirements of the document power plants. Welding and welding. Fundamentals. PNAE G-7-009-89 ".

Правила контроля устанавливают требования по контролю сварных соединений и наплавленных деталей (сборочных единиц, изделий) оборудования и трубопроводов атомных электростанций, станций теплоснабжения, теплоэлектроцентралей, опытных и исследовательских ядерных реакторов и установок, на которые распространяются "Правила АЭУ. ПНАЭ Г-7-008-89". Правила контроля являются руководящим материалом при проектировании, конструировании, изготовлении, монтаже оборудования и трубопроводов и устанавливают порядок, виды, объемы и методы контроля и нормы оценки качества сварных соединений и наплавленных деталей (изделий), выполненных в соответствии с требованиями документа "Оборудование и трубопроводы атомных энергетических установок. Сварка и наплавка. Основные положения. ПНАЭ Г-7-009-89".

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 110

Approved: USSR Gosatomenergonadzor, 5/11/1989

SKU: RUSS20378

Price: $91.00


The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Regulatory documents of supervisory authorities » Normative documents of Gosatomnadzor of Russia »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » welding equipment »

Welding regulations » Welding staff »

Welding regulations » Certification »

Welding regulations » Documentation »

Welding regulations » Non-destructive control »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Assembly devices »

Welding regulations » Welding work » Manual welding »

Welding regulations » Welding work » Automatic welding »

Welding regulations » Welding work » Surfacing »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Fluxes »

Welding regulations » Welding materials » Gases »

Technical Supervision » Section II. State regulation of safety in use of atomic energy » II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision » 2. Nuclear power plants » Federal rules and regulations »

Technical Supervision » Section II. State regulation of safety in use of atomic energy » II. Normative legal and other acts of Federal Service for Ecological, Technological and Nuclear Supervision » 3. Structures and complexes with experimental and research nuclear reactors, critical and subcritical nuclear stands » Federal rules and regulations »

Standards for pipe fittings (TPA) » 3. Piping valves (TPA) standards for industries » 3.1 For energy » 3.1.1 For nuclear power »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » III Nuclear and radiation safety » 4 Objects with nuclear power plants »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » III Nuclear and radiation safety » 3 Atomic stations »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.120 Nuclear power engineering » 27.120.99 Nuclear energy, other aspects »


The Document References:

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium

GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium

GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods

GOST 17512-82: Electric equipment and installations for 3 kV and higher. Measuring methods during high - voltage tests

GOST 18442-80: Non-destructive testing. Capillary methods. General requirements

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 7512-82: Nondestructive testing. Welded joints. Radiography method

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments

PNAE G-7-003-87: Certification Requirements for Welders of Equipment and Piping for Nuclear Power Plants

PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

SO 153-34.03.603-2003: Guidelines for Use and Testing of Protective Means Used in Electrical Installations

The Document is Referenced By:

ATPE 9-09: A typical program for the operational control of the state of the base metal and welded joints of equipment and pipelines of nuclear power plants with VVER-1000 RP during operation

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST R 50.05.09-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control

GOST R 50.05.16-2018: Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unbrakable control. Metrological support

GOST R 50.06.01-2017: Conformity assessment system for the use of nuclear energy. Сonformity assessment of products in the form of acceptance. The procedure of

GOST R 50.07.01-2017: Conformity assessment system for the use of nuclear energy. Decision on the application of imported products for nuclear power plants. The decision-making procedure

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 58328-2018: Pipelines of nuclear power plants. The concept of “flow before destruction”

I 1.2.1.02.019.1121-2016: Determination of mechanical properties of metal of equipment of nuclear power plants by means of non-reference technique in terms of hardness characteristics. Instructions

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

MU 1.2.3.0057-2009: Guidelines. Composition and scope of testing of special pipe fittings for nuclear power plants

MU 1.2.3.07.0057-2016: Composition and scope of tests of special pipeline valves and actuators for nuclear power plants. Methodical instructions

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 24.125.02-89: Welded butt joints of npp pipelines. Types and basic dimensions

OST 24.125.20-89: Units with diaphragms for pipelines of nuclear thermal power plant. Design and dimensions.

OST 34-42-663-84: Details and prefabricated units of NPP pipelines, working P<2.2 MPa (22 kg/cm2), t ≤ 350 °C. Welded branches. Construction and dimensions.

OST 34-42-665-84: Details and prefabricated units of NPP pipelines, working P<2.2 MPa (22 kg/cm2), t ≤ 350 °C. Welded sheet transitions. Construction and dimensions.

OST 34-42-666-84: Details and prefabricated units of NPP pipelines, working P<2.2 MPa (22 kg/cm2), t <= 350 °C. Welded blind caps. Construction and dimensions.

OST 34-42-667-84: Details and prefabricated units of NPP pipelines, working P<2.2 MPa (22 kg/cm2). Flat welded caps to webbings. Construction and dimensions.

OST 95 10440-2002: Equipment for radioactive environments. Welded joints. Types and dimensions and structural elements.

OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules

OT 1.1.8.02.1177-2016: Quality assurance program in the development and manufacture of products supplied to nuclear power plants. Content and Development Requirements

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)

PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection

PNAE G-7-018-89: Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection

PNAE G-7-023-90: Equipment and pipelines of nuclear power units. Welded joints of aluminium alloys. Control rules

PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination

PNAE G-7-031-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part III. Thickness measurement of monometals, metals and corrosion resistant coat

PNAE G-7-032-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part IV. Examination of welded joints of austenitic steels

PNST 186-2017: Construction of objects using atomic energy. Requirements to personnel making works that affect the safety of nuclear energy sites

PR 1.3.3.99.0010-2010: Certification procedure for controllers performing metal control of existing and under construction NPPs

RB 088-14: Руководство по безопасности содержит рекомендации Федеральной службы по экологическому, технологическому и атомному надзору по проведению вихретокового контроля элементов оборудования и трубопроводов атомных энергетических установок, фиксации результатов

RB 089-14: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Visual and measuring testing.

RD 04-05-2008: Methodical instructions on the procedure for exercising supervision over compliance with the requirements of federal standards and regulations in the field of atomic energy use and the conditions of validity of licenses in the construction of nuclear faci

RD 11-08-2008: Standard inspection program during state construction supervision of nuclear facilities

RD 26.260.011-99: Methodological instructions. Calculated setting of standards for air-tightness of vessels and apparatuses.

RD 34.10.059-90: Welding of installation joints of pipelines of nuclear power plants

RD 34.10.117-92: Method for Development of Specified Quantity Allowances for Standby Equipment and Spare Parts for Energy System Repair and Maintenance

RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants

RD 34-10-100-91: Installation instructions for NPP technological pipelines

RD 95 10547-99: Instuction on application of a safety concept. Leak before break at nuclear power plants

RD EO 0505-03: Instructions for metal styloscope

RD EO 0605-2005: Regulation on procedure of application of expired pipeline fittings at nuclear power plants

RD EO 1.1.2.01.0086-2014: Quality Assurance in the Repair of Nuclear Power Plant Systems and Equipment. Main provisions

RD EO 1.1.2.01.0480-2009: Regulations on accreditation and audit of organizations for performance of work, provision of services for the repair of nuclear power plants of Energoatom Concern OJSC

RD EO 1.1.2.01.0713-2013: Provisions on acceptance and testing form conformity assessment for nuclear plants.

RD EO 1.1.2.01.0931-2013: Main provisions of incoming production inspection at nuclear power plants

RD EO 1.1.2.01.0953-2014: Regulation on the inspection of the state of production at manufacturers of equipment for nuclear power plants

RD EO 1.1.2.05.0929-2013: Guidelines for acceptance inspections at manufacturing plants and entrance control at NPP of 1st, 2nd and 3rd security class equipment

RD EO 1.1.2.25.0286-2014: Nomenclature of groups of the same type of pile connections and overlays of equipment and pipelines of the NPP systems with the VVER-440, VVER-1000 and RBMK-1000 RP. Requirements

RD EO 1.1.2.25.0937-2013: Nondestructive control. Uniform requirements for the form and content of technological maps

RD EO 1.1.2.29.0430-2011: The procedure for attracting contracting organizations to work on monitoring the state of metal equipment and pipelines of nuclear power plants

RD EO 1.1.2.29.0952-2014: Production certification procedure

RD EO 1.1.2.29.0954-2014: The procedure for analyzing documentation for equipment supplied to nuclear power plants

RD EO 1.1.2.29.0955-2014: The order of control by the operating organization of the implementation of quality assurance programs in the design and manufacture of equipment for nuclear power plants

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 031-2009: Pipe fittings. Passport. Development and design rules

ST TsKBA 031-2015: Pipeline valves and actuators for it. Passport. Development and design rules

ST TsKBA 078-2011: Pipe fittings. Production certification. Weld Technology

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

STO 1.1.1.01.0069-2017:

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!