GOST 10157-79

ГОСТ 10157-79

Gaseous and liquid argon. Specifications

Аргон газообразный и жидкий. Технические условия

Status: Not effective - Superseded. Information about the registration of 1520-st dated 10.26.2016 (official website of Rosstandart); IUS 4-2017

The standard applies to gaseous and liquid argon derived from air and residual gases of ammonia production and intended to be used as a protective environment for welding, cutting and smelting active and rare metals and alloys based on aluminum, aluminum and magnesium alloys, stainless chromium-nickel superalloys and alloyed steels of various grades, as well as the refining of metals in metallurgy.

Стандарт распространяется на газообразный и жидкий аргон, получаемый из воздуха и остаточных газов аммиачных производств и предназначаемый для использования в качестве защитной среды при сварке, резке и плавке активных и редких металлов и сплавов наих основе, алюминия,алюминиевых и магниевых сплавов, нержавеющих хромоникелевых жаропрочных сплавов и легированных сталей различных марок, а также при рафинировании металлов в металлургии.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: USSR State Committee for Standards, 11/23/1979

SKU: RUSS20411

Price: $134.64




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 71 Chemical industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.1 Products of main chemical industries »

ISO classifier » 71 CHEMICAL INDUSTRY » 71.060 Inorganic chemicals » 71.060.10 Chemical elements »

National standards » 71 CHEMICAL INDUSTRY » 71.060 Inorganic chemicals » 71.060.10 Chemical elements »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L1 Inorganic chemical products » L11 Gases and elementary substances »


The Document is Replaced With:

GOST 10157-2016: Gaseous and liquid argon. Specifications

As a Replacement Of:

GOST 10157-73: Gaseous and liquid argon

The Document References:

GOST 10163-76: Reagents. Soluble starch. Specifications

GOST 10727-91: Unidirectional glass threads. Specifications

GOST 13320-81: Automatic instruments of continuous action used for gas analysis. General requirements

GOST 16539-79: Reagents. Cupric oxide. Specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 22967-90: Injection medical syringes of repeated application. General technical requirements and test methods

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 25706-83: Magnifiers

GOST 26460-85: Air separation products. Gases. Cryogens. Packing, marking, transportation and storage

GOST 27068-86: Reagents. Sodium thiosulphate 5-aqueous. Specifications

GOST 3022-80: Technical hydrogen. Specification

GOST 3760-79: Reagents. Ammonia water. Specifications.

GOST 3773-72: Reagents. Ammonium chloride. Specifications

GOST 3956-76: Silica gel technical. Technical conditions

GOST 4055-78: Reagents. Nickel nitrate 6-aqueous. Specifications

GOST 4107-78: Reagents. Barium hydroxide 8-aqueous. Specifications

GOST 4108-72: Reagents. Barium chloride, 2-aqueous. Specifications

GOST 4164-79: Reagents. Cuprous chloride. Specifications

GOST 4165-78: Reageuts. Copper II sulphate pentahydrate. Specifications

GOST 4232-74: Reagents. Potassium iodide. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 61-75: Reagents. Acetic acid. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 6331-78: Industrial and medical liquid oxygen

GOST 6709-72: Distilled water. Specifications

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 949-73: Small and medium volume steel cylinders for gases for pp ≤ 19.6 MPa (200 kgf/cm2) Specifications

The Document is Referenced By:

GOST 10003-90: Styrene Technical Specification

GOST 10104-75: Technical 2, 4-dinitrotoluene. Specifications

GOST 10153-70: High refractory silicon carbide products. Specifications

GOST 11739.3-99: Aluminium casting and wrought alloys. Methods for determination of berillium

GOST 11808-88: Synthetic latex БC-30. Specifications

GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium

GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic

GOST 12358-82: Steels alloyed and highalloyed. Methods for the determination of arsinic

GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium

GOST 1293.16-93: Lead-antimony alloys. Methods for determination of sulphur

GOST 13047.12-2002: Nickel. Cobalt. Methods for determination of antimony

GOST 13047.12-2014: Nickel. Cobalt. Methods for determination of antimony

GOST 13047.13-2002: Nickel. Cobalt. Methods for determination of lead

GOST 13047.13-2014: Nickel. Cobalt. Methods for determination of lead

GOST 13047.14-2002: Nickel. Cobalt. Methods for determination of bismuth

GOST 13047.14-2014: Nickel. Cobalt. Methods for determination of bismuth

GOST 13047.15-2002: Nickel. Cobalt. Method for determination of tin

GOST 13047.15-2014: Nickel. Cobalt. Method for determination of tin

GOST 13047.16-2002: Nickel. Cobalt. Methods for determination of cadmium

GOST 13047.16-2014: Nickel. Cobalt. Method for determining cadmium

GOST 13047.18-2002: Nickel. Cobalt. Methods for determination of arsenic

GOST 13047.18-2014: Nickel. Cobalt. Methods for determination of arsenic

GOST 13047.19-2002: Nickel. Cobalt. Method for determination of aluminium

GOST 13047.19-2014: Nickel. Cobalt. Method for determining aluminum

GOST 13047.22-2002: Nickel. Cobalt. Methods for determination of thallium in nickel

GOST 13047.22-2014: Nickel. Cobalt. Methods for determination of thallium in nickel

GOST 13047.23-2002: Nickel. Cobalt. Method for determination of tellurium in nickel

GOST 13047.23-2014: Nickel. Cobalt. Method for determination of tellurium in nickel

GOST 13047.24-2002: Nickel. Cobalt. Methods for determination of silver in nickel

GOST 13047.24-2014: Nickel. Cobalt. Methods for determination of silver in nickel

GOST 13047.25-2002: Nickel. Cobalt. Methods for determination of selenium in nickel

GOST 13047.25-2014: Nickel. Cobalt. Methods for determination of selenium in nickel

GOST 13047.2-81: Nickel. Methods for the determination of carbon

GOST 13047.7-2002: Nickel. Cobalt. Methods for determination of sulphur

GOST 13047.7-2014: Nickel. Cobalt. Methods for determination of sulphur

GOST 13637.7-93: Gallium. Method for the determination of sulphur

GOST 1429.14-2004: Tin-lead solders. Methods of atomic-emission spectral analysis

GOST 14338.4-82: Molybdenum. Methods for determination of nitrogen, oxygen and hydrogen

GOST 15483.10-2004: Tin. Methods of atomic-emission spectral analysis

GOST 15820-82: Polystyrole and copolymers of styrole. Gas chromatographic method for determination of residual monomers and non-polymerizing impurities

GOST 16273.1-2014: Selenium technical. Method of spectral analysis

GOST 16412.9-91: Iron powder. Method of photoelectric spectral analysis of silicon, manganese and phosphorus

GOST 17261-2008: Zinc. Methods of the atomic emission spectrographic analysis.

GOST 1762.6-71: Aluminium-silicon alloy ingots. Methods for determination of copper

GOST 1762.7-71: Aluminium-silicon alloy ingots. Methods for determination of zinc

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 17746-96: Sponge titanium. Specifications

GOST 18165-2014: Water. Methods for determining aluminum content

GOST 18184.2-79: Niobium pentoxide. Method for the determination of fluoride content

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 19347-2014: Copper sulfate. Technical conditions

GOST 1942-86: 1,2-Dichlorethane for industrial use. Specifications

GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics

GOST 21957-76: Cryogenic engineering. Terms and definitions

GOST 22001-87: Reagents and super pure substances. Method for determination of chemical elements impurities by atomic absorption spectrometry

GOST 22025-76: Resistive silicon alloys. Specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 22648-77: Plastics. Methods for determination of hygienic characteristics

GOST 23050-2012: Virus vaccine against Aujeszky disease cultural dry. Specification

GOST 23328-95: Zinc alloys. Methods of spectral analysis

GOST 23338-91: Methods of definition of the diffusion hydrogen content in deposited and seam metal

GOST 23401-90: Metal powders. Catalysts and carriers. Determination of specific area

GOST 23581.7-79: Iron ores, concentrates, agglomerates and pellets. Methods of the determination of zinc and lead content

GOST 23781-87: Natural combustible gases. Chromatographic method for determination of component composition

GOST 23862.18-79: Neodymium, gadolinium and their oxides. Method of determination of rare-earth element oxides

GOST 23862.35-79: Rare-earth metals and their oxides. Methods of determination of sulphur, zinc, cerium and europium

GOST 23862.7-79: Rare-earth metals and their oxides. Chemical-spectral methods of determination of impurities in oxides of rare-earth elements

GOST 23862.8-79: Lanthanum, cerium, ytterbium, lutetium, yttrium and their oxides. Chemical-spectral method of determination of impurities in oxides of rare earth elements

GOST 24018.1-80: Nickel-based fire-resistant alloys. Methods for the determination of tin

GOST 24018.3-80: Nickel-based fire-resistant alloys. Methods for the determination of lead

GOST 24018.4-80: Nickel-based fire-resistant alloys. Methods for the determination of bismuth

GOST 24018.5-80: Nickel-based fire-resistant alloys. Method for the determination of lead and bismuth

GOST 24018.6-80: Nickel-based fire-resistant alloys. Methods for the determination of arsenic

GOST 2408.3-90: Solid fuel. Methods for the determination of oxygen content

GOST 24596.11-2015: Feed phosphates. Method for determination of cadmium

GOST 24596.11-96: Feed phosphates. Method for determination of cadmium

GOST 24596.9-2015: Feed phosphates. Method for determination of lead

GOST 24596.9-81: Feed phosphates. Methods for determination of lead

GOST 24614-81: Liquids and gases not reacting with the Karl Fischer reagent. Coulonometric method of water determination

GOST 24975.1-89: Ethylene and propylene. Chromatographic methods of analysis

GOST 25278.17-87: Alloys and foundry alloys of rare metals. Spectral (with induction high-frequency plasma) method for determination of elements and impurities in alloys on the base of niobium

GOST 25702.18-83: Rare metallic concentrates. Spectral methods of the determination of alumina, barium, iron, calcium, silicon, magnum, niobium, tantalum, titanium, zirconium and chromium oxide

GOST 25742.3-83: Methanol poison, technical. Method for sulphur determination

GOST 25823-83: Manganese dioxide for chemical current sources

GOST 26388-84: Welded joints. Test methods on resistance to cold crack formation under fusion welding

GOST 26624-85: 2-Ethylhexanol technical. Specifications

GOST 2706.2-74: Benzene hydrocarbons and allied products. Chromatographic method of determination of main substance and impurities content in benzene, toluene and xylene

GOST 27308-87: Manganese ores, concentrates and agglomerates. Method for determination of lead

GOST 27611-88: Cast iron. Photoelectrical special method of analysis

GOST 27953-88: Detonation coatings. General requirements

GOST 27973.2-88: Gold. Method of atomic-emission analysis with inductive plasma

GOST 27973.3-88: Gold. Method of atomic-absorption analysis

GOST 27981.1-2015: High purity copper. Method of atomic-spectral analysis

GOST 27981.1-88: Copper of high purity. Methods of atomic-spectral analysis

GOST 27981.4-88: Copper of high purity. Methods of atomic-absorption analysis

GOST 28052-97: Titanium and titanium alloys. Methods of oxygen determination

GOST 28106-2015: Copper cathodes. Sampling and preparation of samples and pieces for determination of electrical resistivity

GOST 28178-89: Fodder yeast. Test methods

GOST 28353.2-89: Silver. Method of atomic-emission analysis with inductive plasma

GOST 28353.3-89: Silver. Method of atomic-absorption analysis

GOST 28794-90: Reagents. Method for the determination of specific surface of chromatographic materials by thermal desorption

GOST 28844-90: Thermal sprayed coatings strenghtive and reductive. General requirements

GOST 29117-91: Alloyed and high-alloyed steels. Methods of bismuth determination

GOST 30418-96: Vegetable oils. Method for determination of fatty acid content

GOST 31266-2004: Raw food and food products. Nuclear and absorbing method of the determination of arsenium

GOST 31370-2008: Natural gas. Sampling guidelines

GOST 313-77: Aniline for industrial use. Specifications

GOST 31382-2009: Copper. Methods of analysis

GOST 31411-2009: Ammonium perrenat. Specifications

GOST 31492-2012: Sparkling wines and sparkling pearl wines. General specification

GOST 31650-2012: Medical remedies for animals, feed and feed additives. Detection of mass fraction of mercury by atom absorbtion spectrometric method

GOST 31651-2012: Medical remedies for animals, feed and feed additives. Detection of mass fraction of selenium by atom absorbtion spectrometric method

GOST 31663-2012: Vegetable oils and animal fats. Determination of methyl esters of fatty acids by gaz chromatography method

GOST 31731-2012: Sparkling wine. Specification

GOST 31753-2012: Vegetable oils. Methods for determination of phosphorated substances

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 31867-2012: Drinking water. Determination of anions content by chromatography and capillary electrophoresis method

GOST 31870-2012: Drinking water. Determination of elements content by atomic spectrometry methods

GOST 31950-2012: Water. Method for determination of total mercury by flameless atomic absorption spectrometry

GOST 32248-2013: Coal core with size of pieces 20 mm and more. Method of strength determination after reaction with carbon dioxide

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32808-2014: Medicine remedies for veterinary use. Vaccines against brucellose of animals. Specifications

GOST 33022-2014: Cosmetics. Determination of the mercury mass fraction by the method of flameless atomic absorption

GOST 33206-2014: Copper and complex ores, and products of their processing. Atomic emission spectrometry with inductively coupled plasma method for weight fraction measurement of copper, zinc, lead, bismuth, cadmium, arsenic, antimony

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33280-2015: Medicine remedies for veterinary use. Vaccine against leptospirosis of animals. Specifications

GOST 33336-2015: Sparkling wines. General specification

GOST 33425-2015: Meat and meat products. Determination of nickel, chromium and cobalt by electrothermal atomic absorption spectrometry

GOST 33426-2015: Meat and meat products. Determination of lead and cadmium by electrothermal atomic absorption spectrometry

GOST 33459-2015: Medicine remedies for veterinary use. Vaccines against dermatophytosis of animals. General specification

GOST 33730-2016: Platinum. Method of inductively coupled plasma atomic-emission analysis

GOST 33731-2016: Platinum. Method of spark atomic-emission analysis

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33822-2016: Biological medicine remedies for veterinary use. The vaccine against livestock listeriosis, live. Specification

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34247-2017: Copper concentrate. Measurement of the mass fraction of copper and impurities by atomic emission spectrometry with inductively coupled plasma

GOST 34248-2017: Copper and polymetallic ores. Measurement of the mass fraction of copper and impurities by atomic emission spectrometry with inductively coupled plasma

GOST 34369-2017: Silver. Method of spark atomic-emission analysis

GOST 4470-79: Reagents. Manganese (IV) oxide. Specifications

GOST 4517-87: Reagents. Methods for preparation of accessory reagents and solutions used for analysis

GOST 5208-2013: Technical normal butyl alcohol. Specifications

GOST 5208-81: Technical normal butyl alcohol. Specifications

GOST 5538-78: Reagents. Potassium citrate tribasic 1-aqueous. Specifications

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 5819-78: Reagents. Aniline. Specifications

GOST 6012-2011: Nickel. Methods of the chemical and atomic emission spectrographic analysis.

GOST 6012-78: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 6012-98: Nickel. Methods of chemical-atomic-emission spectral analysis

GOST 612-75: Reagents. Manganese chloride 4-aqueous. Specifications

GOST 646-84: Technical chlorobenzene. Specifications

GOST 6674.4-96: Copper-phosphorus alloys. Method for the determination of bismuth

GOST 8.652-2016: State system for ensuring the uniformity of measurements. State verification schedule for instruments measuring mass concentration dissolving in water gasses (oxygen, hydrogen)

GOST 8504-71: Reagents. Potassium biiodate. Specifications

GOST 851.12-93: Primary magnesium. Method for determination of lead

GOST 851.1-93: Primary magnesium. Methods for determination of iron

GOST 851.3-93: Primary magnesium. Methods for determination of nickel

GOST 851.4-93: Primary magnesium. Methods for determination of copper

GOST 851.5-93: Primary magnesium. Methods for determination of aluminium

GOST 851.8-93: Primary magnesium. Spectral method for determination of sodium and potassium

GOST 851.9-93: Primary magnesium. Methods for determination of titanium

GOST 8595-83: Industrial lithium hydroxide

GOST 8775.4-87: Lithium. Method of determination of nitrogen

GOST 8776-2010: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8776-79: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 8776-99: Cobalt. Methods of chemical-atomic-emission spectral analysis

GOST 9286-89: Pentaerythritol for industrial use. Specifications

GOST 9293-74: Gaseous and liquid nitrogen. Specifications

GOST 9385-2013: Technical ethyl benzene. Specifications

GOST 9385-77: Ethyl benzene technical. Specifications

GOST 9536-2013: Technical isobutyl alcohol. Specifications

GOST 9536-79: Isobutyl alcohol. Specifications

GOST 9722-97: Nickel powder. Specifications

GOST 9853.17-96: Sponge titanium. Method for determination of palladium

GOST 9853.22-96: Sponge titanium. Methods for determination of nickel

GOST 9853.23-96: Sponge titanium. Spectral method for determination of silicon, iron, nickel

GOST 9853.24-96: Sponge titanium. Spectral method for determination of vanadium, manganese, chrome, copper, zirconium, aluminium, molybdenum, tin, magnesium and tungsten

GOST 9853.5-96: Sponge titanium. Methods for determination of oxygen

GOST R 50429.7-92: Gallium. Method for the determination of sulphur

GOST R 50921-2005: Coal coke with size of pieces 20 mm and more. Method of strength determination after reaction with carbon dioxide

GOST R 51017-2009: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51056-97: Alloyed and high-alloyed steel. Atomic emission spectrometry method of determination of tungsten and molybdenum

GOST R 51158-2009: Sparkling wines and sparkling pearl wines. General specification

GOST R 51165-2009: Russian sparkling wine. General specifications

GOST R 51309-99: Drinking water. Determination of elements content by atomic spectrometry methods

GOST R 51483-99: Vegetable oils and animal fats. Determination by gas chromatography of constituent contents of methyl esters of total fatty acid content

GOST R 51695-2000: Poly(ethylene terephthalate). General specifications

GOST R 51766-2001: Raw material and food-stuffs. Atomic absorption method for determination of arsenic

GOST R 51768-2001: Resources saving. Waste treatment. Methods for determination of mercury in mercury containing waste. General requirements

GOST R 51927-2002: Steel and cast iron. Atomic emission with inductively coupled plasma spectral method of calcium determination

GOST R 52170-2003: Mechanized attractions safety. Principal rules of the design of steel constructions

GOST R 52181-2003: Drinking water. Determination of anions content by ion chromatography and capillary electrophoresis methods

GOST R 52371-2005: Tin and lead babbits. Method of inductively coupled plasma atomic-emission spectrometry

GOST R 52415-2005: Fresh cow's milk - raw material. Luminescent method of quantitative determination of the total amount of mesophilic aerobic and elective anaerobic microorganisms

GOST R 52519-2006: Platinum. Method of inductively coupled plasma atomic-emission analysis

GOST R 52521-2006: Platinum. Method of spark atomic-emission analysis

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52676-2006: Vegetable oils. Methods for determination of phosphorated substances

GOST R 53100-2008: Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of cadmium and lead by atom absorption spectrometric method

GOST R 53101-2008: Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of arsenic by atom absorption spectrometric method

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53280.3-2009: Automatic fire extinguishing systems. Fire extinguishing media. Part 3. Gaseous extinguishing media. Test methods

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53352-2009: Medical remedies for veterinary use, feed and feed additives. Detection of mass fraction of mercury by atom absorption spectrometric method

GOST R 53372-2009: Gold. Methods of analysis

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 54313-2011: Palladium. Method of inductively coupled plasma atomic-emission analysis

GOST R 54335-2011: Palladium. Method of spark atomic-emission analysis

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 54919-2012: Concentrates lead. Methods for the determination of gold and silver

GOST R 54921-2012: Zink concentrates. Atomic emission spectroscopy with inductively coupled plasma. Determination of copper, lead, cadmium, iron, aluminium, cobalt, antimony, manganese, arsenic and indium

GOST R 55066-2012: Butadiene-1,3. Specifications

GOST R 55079-2012: Steel. Method of inductively coupled plasma atomic-emission analysis

GOST R 55283-2012: Inactivated vaccines against rabies of animals. Specifications

GOST R 55447-2013: Feedstuffs, compound feeds, feed raw materials. Determination of cadmium, lead, arsenic, mercury, chromium, tin by atomic absorption spectroscopy

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55558-2013: Sulphide copper-nickel ore. Mass-spectrometry method for determination of platinum, palladium, rhodium, ruthenium, iridium and cold content with preliminary collecting for nickel matte

GOST R 55685-2013: Blister copper. Methods of analysis

GOST R 55845-2013: Reagents and high purity substances. Determination of impurities of chemical elements by atomic-emission spectrometry with inductively coupled plasma

GOST R 56306-2014: Silver. Method of inductively coupled plasma atomic-emission analysis

GOST R 56307-2014: Silver. Method of spark atomic-emission analysis

GOST R 56308-2014: Silver. Method of atomic-absorption analysis

GOST R 56372-2015: Mixed feed, concentrates and premixes. Determination of mass fraction of iron, manganese, zinc, cobalt, copper, molybdenum and selenium by atomic absorption spectroscopy method

GOST R 56719-2015: Liquefied natural gas. Sampling

GOST R 56916-2016: Natural combustible gas. Determination of water vapours content by Karl Fisher method

GOST R 57060-2016: Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma atomic emission spectrometry method

GOST R 57061-2016: Copper. Measurement of impurities mass fraction in copper by an inductively coupled plasma mass spectrometry method

GOST R 57103-2016: Specialized food products. Methods of sampling, detection and determination of nanoparticles and nanomaterials in the composition of agricultural and food products

GOST R 8.771-2011: State system for ensuring the uniformity of measurements. Analytical gas laboratory chromatographs. The method of verification

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

M-MVI 183-06: Methods for measuring the mass concentration of organic substances in the air of the working area and gas emissions from enterprises using a gas chromatography method with a photoionization detector

MR 1.2.0018-11: Sampling procedure and methods for determining the content of nanoparticles in the composition of household chemical products, disinfectants and perfumes and cosmetics

MU 3112-84: Methodological guidelines for the chromatographic measurement of concentrations of methane, ethane, propane, butane, isobutane, pentane, isopentane and their sum in the air of the working area

MU 3125-84: Guidelines for the polarographic measurement of isophthalic acid concentrations in the air of the working area

MU 3136-84: Guidelines for the polarographic measurement of zinc sulfide concentrations and phosphors based on zinc compounds/K-86, K-82n, K-75/in the working area air

MU 3963-85: Methodological guidelines for gas chromatographic measurement of concentrations of 0-1-mentene, 0-1, 4-mentadien, 0-cymol in the air of the working area

MU 4165-86: Guidelines for the polarographic measurement of anthraquinone concentrations in the air of the working area

MU 4170-86: Guidelines for the polarographic measurement of benzoquinone concentrations in the air of the working area

MU 4182-86: Guidelines for the polarographic measurement of concentrations of alpha and beta naphthols in the air of the working area

MU 4183-86: Guidelines for the polarographic measurement of alpha-naphthoquinone concentrations in the air of the working area

MU 4185-86: Guidelines for the polarographic measurement of the concentration of p-oxydiphenylamine in the air of the working area

MU 4193-86: Methodological guidelines for gas chromatographic measurement of nickel tetracarbonyl concentrations in the working area air

MU 4202-86: Guidelines for the polarographic measurement of concentrations of 5-ethoxyphenylene-1, 2-thiazonium chloride in the air of the working area

MU 4446-87: Methodological guidelines for gas chromatographic measurement of concentrations of 1, 1-di (4 chlorophenoxy) -3, 3-dimethylbutanone-2 (dichlorophenoxypinacolin) in the air of the working area

MU 4464-87: Methodological guidelines for gas chromatographic measurement of concentrations of I- (4 chlorophenoxy) -3, 3-dimethylbutanone-2 and I-chloro- (4 chlorophenoxy) -3, 3-dimethylbutanone-2 in the air of the working area

MU 4516-87: Guidelines for the polarographic measurement of zinc selenide concentrations in the working area air

MU 4628-88: Methodological guidelines for gas chromatographic determination of residual monomers and non-polymerizable mixtures released from polystyrene plastics in water, model media and food products

MU 4885-88: Guidelines for gas chromatographic measurement of concentrations of furfural, furfuryl alcohol and phenol in the air of the working area

MU 4893-88: Methodological guidelines for gas chromatographic measurement of N-ethyl-m-toluidine concentrations in the air of the working area

MU 5068-89: Methodological guidelines for gas chromatographic measurement of concentrations of 1, 1-dichloro-3, 3-dimethylbutanone-2 in the air of the working area

MU 5069-89: Guidelines for gas chromatographic measurement of concentrations of N, N-dioxydiethyl-m-chloroaniline in the air of the working area

MU 5082-89: Methodological guidelines for gas chromatographic measurement of concentrations of 1- (1, 2, 4-triazolyl-1) -1- (4-chlorophenoxy) -3, 3-dimethylbutanone-2 in the air of the working area

MU 5271-90: Methodological guidelines for gas chromatographic measurement of concentrations of sulfenamide-C (N-cyclohexylbenzthiazolsulfenamide-2) in the air of the working area

MU 5274-90: Guidelines for the voltammetric measurement of the concentration of cadmium-mercury telluride in the air of the working area

MU 5278-90: Methodological guidelines for gas chromatographic measurement of concentrations of 1- (1, 2, 4-triazolyl) -1- (4-chlorophenoxy) -3, 3-dimethylbutanol-2 (triadimenol) in the air of the working area

MU 5301-90: Methodological guidelines for gas chromatographic measurement of acetaldehyde, butyraldehyde and crotonic aldehyde concentrations in the working area air

MU 5939-91: Methodological guidelines for gas chromatographic measurement of concentrations of ethyl styrene, diethylbenzene and divinylbenzene in the air of the working area

MU 5975-91: Guidelines for polarographic measurement of concentrations of 3-carbethoxy-delta-2-dehydroquinuclidine in the air of the working area

MU 6015-91: Guidelines for the polarographic measurement of indium phosphide concentrations in the air of the working area

MUK 2.3.3.052-96: Sanitary-chemical investigation of production made from the polystyrene and styrol copolymers

MUK 4.1.1482-03: Determination of the content of chemical elements in diagnosable biosubstrates, multivitamin preparations with microelements, in biologically active food supplements and in raw materials for their manufacture by atomic emission spectrometry with inductive

MUK 4.1.1483-03: Determination of the content of chemical elements in diagnosable biosubstrates, preparations and biologically active additives by mass spectrometry with inductively coupled argon plasma

MUK 4.1.1565-03: Guidelines for measuring the concentration of gallium phosphide in the air of the working area using flameless atomic absorption spectrophotometry

MUK 4.1.171-96: Recommended practice for gaschromatograph measurement of concentrations of 3-phenoxybenzyltriethylammonium chloride in the air of the working zone

MUK 4.1.203-96: Gas chromatographic measurement of the concentration of anisic aldehyde, p-methoxybenzaldehyde in the air of the working area

MUK 4.1.206-96: Gazochromatic measuring of concentration of benzyl benzoate in the air of work area

MUK 4.1.209-96: Gas chromatographic measurement of concentrations of 1,4-butanediol (tetramethylene glycol) in the air of the working area

MUK 4.1.223-96: Chromatographic measurement of concentrations of 2.5-diphenyloxazole in the air of working zone

MUK 4.1.266-96: Gas chromatographic measurement of concentrations of hydrochloride of methyl ester of glycine (HMEG) in the air of the working zone

MUK 4.1.604-96: Guidelines for the gas chromatographic determination of benzyl benzoate in atmospheric air

MUK 4.1.610-96: Guidelines for the gas chromatographic determination of dimethyl isophthalate in atmospheric air

MUK 4.1.611-96: Methodological guidelines for gas chromatographic determination of dimethyl phthalate in atmospheric air

MUK 4.1.627-96: Guidelines for the gas chromatographic determination of methyl formate in atmospheric air

MUK 4.1.745-99: Gas chromatographic determination of dimethyl ether of terephthalic acid in water

MUK 4.1.948-99: Guidelines for the polarographic measurement of vikasol (2, 3-dihydro-2-methyl-1, 4-naphthoquinin-2-sulfonate sodium) (vitamin K) concentrations in the working area air

MUK 4.1.949-99: Methodological guidelines for gas chromatographic measurement of diisopropyl ether concentrations in the working area air

MUK 4.1.986-00: Measurement method for measuring the mass fraction of lead and cadmium in food products and food raw materials using electrothermal atomic absorption spectrometry

MUK 4.1.991-00: Measurement method for measuring the mass fraction of copper and zinc in food products and food raw materials by electrothermal atomic absorption spectrometry

MUK 4.4.1.011-93: Determination of volatile N-nitrosamines in food raw materials and food products. Guidelines for control methods

MVI.MN 1792-2002: Method for performing measurements of the concentrations of elements in liquid samples using the ARL 3410+ spectrometer

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

ONTP 09-88: All-Union standards for the technological design of enterprises of mechanical engineering, instrument engineering and metalworking. Assembly and welding shops

OST 153-34.0-969-99A: Assembly units and parts of the supports of the station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OST 153-34.0-969-99А: Assembling units and support station pipeline details of nuclear power plants. Nominal pressure is no more than 4,0 MPa. General technical requirements.

OST 24.050.34-84: Wagon steel structures design and production. Specifications.

OST 24.125.02-89: Welded butt joints of npp pipelines. Types and basic dimensions

OST 24.125.31-89: Welded seams for CHP plant pipeline joints. Types and main dimensions.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 24.940.01-90: Welded steel structures. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-01-1434-87: Welding of steel technological pipelines on nominal pressure over 10 to 100 MPa (over 100 to 1000 kgf/cm2). Technical requirements.

OST 26-01-151-82: Steel welded vessels and devices for low-temperature gas separations. Technical requirements, acceptance regulations and testing methods.

OST 26-18-6-88: Vessels, Apparatus and Process Units, Operating at Temperature Below Minus 70°C. Technical requirements

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

OST 36-58-81: Steel building structures. Welding. Basic requirements.

OST 5 9137-83: Welding of casting defects in steel and cast iron. Technical requirements

PB 03-108-96: Process pipeline design and safe operation rules

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations

PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions

PNAE G-7-022-90: Equipment and pipelines of nuclear power units. Arc welding of aluminium alloys in protective gases. Main provisions

PND F 13.1.66-09: Methods for measuring the mass concentration of elements (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt, calcium, magnesium) in industrial emissions using inductively coupled plasma atomic emission spectrometry

PND F 13.1:2.22-98: Quantitative chemical analysis of atmospheric air and air emissions. Methods for measuring the volume fractions of hydrogen, oxygen, nitrogen, methane, oxide and carbon dioxide in the air of the working area and industrial emissions by gas chromatography

PND F 13.2.3.67-09: Methods for measuring the mass concentration of elements (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt) in the atmospheric air of populated areas, air at sanitary inductively coupled plasma emission spectromet

PND F 14.1:2:4.135-98: Quantitative chemical analysis of water. Methods for measuring the mass concentration of elements in drinking, natural, wastewater and precipitation samples using inductively coupled plasma atomic emission spectrometry

PND F 14.1:2:4.136-98: Quantitative chemical analysis of water. Methods for measuring the mass concentration of mercury by flameless atomic absorption spectrophotometry (Cold vapor method) in drinking, natural and waste waters and precipitation

PND F 14.1:2:4.140-98: Quantitative chemical analysis of water. Methods for measuring mass concentrations of beryllium, vanadium, bismuth, cadmium, cobalt, copper, molybdenum, arsenic, nickel, tin, lead, selenium, silver, antimony, chromium in drinking, natural and waste waters using atomic absorption spectrometry with electrothermal atomization

PND F 14.1:2:4.143-98: Measurement of mass concentrations of aluminum, barium, boron, iron, potassium, calcium, cobalt, magnesium, manganese, copper, sodium, nickel, strontium, titanium, chromium and zinc in drinking, natural and waste waters using ICP spectrometry

PND F 14.1:2:4.260-10: Quantitative chemical analysis of water. Methods for measuring the mass concentration of mercury in drinking, natural, wastewater using the flameless AAS method

PND F 14.1:2:4.262-10: Quantitative chemical analysis of water. Methods of measuring the mass concentration of ammonium ions in drinking, surface (including sea) and wastewater photometric method with Nessler's reagent

PND F 16.1:2.3:3.11-98: Method for performing measurement of metal content in solid objects (soil, composts, cakes, sewage sludge, samples of plant origin) by spectrometry with inductively coupled plasma

PND F 16.1:2.3:3.50-08: Methods for measuring the mass fractions of mobile forms of metals (zinc, copper, nickel, manganese, lead, cadmium, chromium, iron, aluminum, titanium, cobalt, arsenic, vanadium) in soils, waste, composts, cakes, sewage sludge water by the atomic emission

PND F 16.2.2:2.3.71-2011: Quantitative chemical analysis of soil. Methods of measuring the mass fractions of metals in sewage sludge, bottom sediments, samples of plant origin by spectral methods

PNST 63-2015: Materials from multiwall carbon nanotubes. Specifications

R 393-80: Recommendations for aluminum metallization of the inner surface of pipes with an outer polyethylene coating and welding of annular joints

RD 01-001-06: Welding of steel gas pipelines and the gas equipment in the city municipal services and power installations.

RD 153-006-02: Guidelines for the Welding Process in Construction and Renovation of Trunk Petroleum Pipelines

RD 153-34.1-003-01: Welding, heat treatment and control of copper pipe systems and pipelines at power equipment installation and repair.

RD 153-34.1-44.202-2001: Petroleum fuel for gas turbines. Determination of vanadium by atomic absorption spectrophotometry (flameless method)

RD 153-34.1-44.210-2001: Petroleum fuel for gas turbines. Lead determination by atomic absorption spectrophotometry (flameless method)

RD 153-39.4-078-01: Operation Requirements for Tanks on Trunk Petroleum Product Pipelines and at Petroleum Depots

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon

RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications

RD 2730.940.102-92: Steam and hot water boilers, steam and hot-water-pipelines. Welding. General requirements.

RD 34.10.117-92: Method for Development of Specified Quantity Allowances for Standby Equipment and Spare Parts for Energy System Repair and Maintenance

RD 34.10.124-94: Instructions for the preparation and storage of welding materials

RD 34.10.306-88: Material allowances for repairs. Stationary steam boilers.

RD 34.15.027-93: Welding, Heat Treatment, and Testing of Boiler Tube Systems and Piping During Installation and Repair of Electric Supply Station Equipment (RTM-1s-93)

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 3689-001-00220302/31-2004: Radiant pipes and components for reaction pipe furnaces. Requirements for design, production and delivery.

RD 3689-002-00220302/31-2008: Welding of radiant tubes and their elements for reaction tube furnaces. Main provisions

RD 39-0147014-535-87: Instructions for welding at installation and repair of pipelines and critical metal structures in organizations and enterprises of the Ministry of oil and gas industry.

RD 52.04.186-89: Part 1. Guidance on the control of air pollution. Pollution of the atmosphere in cities and other settlements. Main Geophysical Observatory. A.I.Voyeikova (MGO)

RD 52.18.571-2011: Method for measuring the mass fraction of arsenic in soil and sediment samples using atomic absorption spectrometry with electrothermal atomization. NGO "Typhoon"

RD 52.18.583-2011: Method for measuring the mass fraction of antimony in samples of soils and bottom sediments by atomic absorption spectrometry with electrothermal atomization. NGO "Typhoon"

RD 52.18.685-2006: Guidelines. Determination of the mass fraction of metals in soil samples and bottom sediments. The method of measurement using atomic absorption spectrophotometry. NGO "Typhoon"

RD 52.18.827-2016: Mass fraction of mercury in samples of soil, ground, bottom sediments and biomaterial. Measurement procedure by cold vapour atomic absorption spectroscopy

RD 52.24.377-95: Methodical instructions, methods for measuring the mass concentration of metals (Al, Ag, Be, Cd, Co, Cr, Cu, Fe, Mn, Mo, Ni, Pb, V, Zn) in surface water using atomic absorption with direct electrothermal atomization of samples

RD 52.24.526-2012: Mass concentration of arsenic in waters. Measurement by atomic absorption method

RD 52.44.594-2016: Mass concentration of heavy metals in precipitation and surface waters. Measurement technique by atomic absorption spectrometry with flameless atomization

RD RTM 26-07-233-79: Surfacing pipe fitting details sealing surfaces with 06Х20Н10М3Д3С4 type material.

RTM 108.940.08-85: Welded structures of power equipment. General requirements for structural and process design

RTM 26-07-133-93: Pipeline fittings. Welding and a building-up of details from titanic alloys. Technical requirements and quality control.

SA 03-005-07: Industrial pipelines of oil-refining, petrochemical and chemical industry. Requirements to configuration and operation

SNiP 2.03.06-85: Aluminium structures

SNiP II-24-74: Aluminum constructions

SNiP II-45-75: Main pipelines

SP 105-34-96: Code of regulations on construction of trunk gas pipelines. Welding works and quality control of welding joints

SP 128.13330.2012: Aluminium structures

SP 128.13330.2016: Aluminium structures

SP 16.13330.2011: Steel structures

SP 34-116-97: Instructions For Design, Construction and Redesign of Field Oil and Gas Pipelines

SP 36.13330.2012: Trunk pipelines

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 53-102-2004: General rules for steel structure design

SP 9.13130.2009: Fire Engineering. Fire extinguishers. Requirements to Operation

ST RK 2214-2012: Water Quality. Determination of atomic absorption spectrophotometry micro-element content using a graphite furnace

ST RK GOST R 51309-2003: Drinking water. Determination of elements content by atomic spectrometry methods

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 045-2009: Pipe fittings. Welding and surfacing of parts made of titanium and titanium alloys. Technical requirements and quality control

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements

STB 2016-2009: Oil and fat food products. Margarines and spreads. General specifications

STB GOST R 51309-2001: Drinking water. Determination of elements content by atomic spectrometry

TU 34-38-20092-94: High pressure surface heaters for steam turbine regeneration systems. Technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 6-21-12-94: High purity argon

VSN 006-89: Construction Of Main And Field Pipelines Welding

GOST 20060-83: Combustible natural gases. Methods for determining water vapor content and dew point of moisture

GOST 33411-2015: Raw materials and food products. Determination of the mass fraction of arsenic by atomic absorption method with the generation of hydrides

GOST 33412-2015: Raw materials and food products. Determination of the mass fraction of mercury by flameless atomic absorption

M-MVI 80-2008: Methods for measuring the mass fraction of elements in soil samples, soils and bottom sediments by atomic emission and atomic absorption spectrometry

MU 4769-88: Guidelines for gas chromatographic measurement of the concentration of freons 11, 12, 113, 114 in the air of the working area

MU 4780-88: Guidelines for gas chromatographic measurement of concentrations of N-ethyl-N'-cyanoethylaniline (ECEA) and N-acetoxyethyl-N'-cyanoethylaniline (AECECA) in the air of the working area

MU 4782-88: Guidelines for the polarographic measurement of concentrations of nitrate and basic zinc carbonate in the air of the working area

MU 4796-88: Guidelines for the polarographic measurement of concentrations of iron, titanium, molybdenum, chromium (III - VI) and vanadium in the air of the working area

ORD 14.370-44-87: Guidelines for the design of oxygen facilities in metallurgical plants

OST 153-34.0-984-99A: Assembly units and suspension parts of nuclear power plant station pipelines Py <= 4.0 MPa (40 kgf/cm2). General technical requirements

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 31.52.23-89: Ship diesel engines. Restoring cylinder covers using welding. Typical Processes

RD 52.18.843-2017: Mass fraction of mercury in organic compounds in samples of soils, bottom sediments and biological material. Measurement procedure by atomic absorption spectroscopy of "cold steam"

TU 4112-091-00220302-2005: Steel castings for equipment of oil refineries and petrochemical plants

VSN 21-02-01/MO RF: Automatic gas fire extinguishing installations of the armed forces of the Russian Federation. Norms and design rules

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16
Degrees of protection provided by enclosures (IP Code)
Language: English
Price: $195.03

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!