GOST 12.4.012-83
ГОСТ 12.4.012-83
|
|
Occupational safety standards system. Vibration. Means for measurement and control of vibration in site. Technical requirements
Система стандартов безопасности труда. Вибрация. Средства измерения и контроля вибрации на рабочих местах. Технические требования
Status: Not effective - Superseded. Registration information 387-ct dated 12/21/2007 (the official website of FSUE "Standartinform"); (IUS 3-2008)
The standard applies to measurement and control instruments, including devices of the ASIV group, for measuring the parameters of harmonic and random vibration with a ratio of peak values to root-mean-square values less than 5.
Стандарт распространяется на средства измерения и контроля, в том числе приборы группы АСИВ, для измерения параметров гармонической и случайной вибрации при отношении пиковых значений к средним квадратическим менее 5.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
1/28/1983
SKU: RUSS20419
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.1 Vibration »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.160 Human exposure to vibration and shock »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.160 Human exposure to vibration and shock »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T58 System of standards infield of nature conservation and improvement of use of natural resources, labor safety, scientific organization of labor »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Occupational safety standards system (SSBT). Scientific organization of labor. Safety precautions. Sanitation and occupational health »
The Document is Replaced With:
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
As a Replacement Of:
GOST 12.4.012-75: Occupational safety standards system. Means for measurement and control of vibration in site. Technical requirements
The Document References:
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 16819-71: Vibrometers. Terms and definitions
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 22261-94: Measuring instruments for electrical
GOST 24314-80: Electronic measuring instruments. Terms and definitions, methods of expressing errors and general test conditions
GOST 24346-80: Vibration. Terms and definitions
GOST 26.011-80: Measuring and automation devices. Input and output current and voltage continuous signals
GOST 26.014-81: Measurement and automation means. Input and output electric coding signals
GOST 8.395-80: Standard measurement conditions for calibration
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
The Document is Referenced By:
GOST 12.1.012-78: Occupational safety standards system. Vibration. General safety requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.1.015-79: Occupational safety standards system. Frames for sawmills, two-story. Standards of vibration in the workplace. Test method
GOST 12.1.034-81: Occupational safety standards system. Vibration. General requirements for measurements
GOST 12.1.040-83: Occupational safety standards system. Laser safety. General
GOST 12.1.042-84: Occupational safety standards system. Local vibration. Measurement methods
GOST 12.1.043-84: Occupational safety standards system. Vibration. Methods of measurement at workplaces in industrial premises
GOST 12.1.047-85: Occupational safety standards system. Vibration. Methods of control at working places and in accommodations of sea and river ships
GOST 12.1.049-86: Occupational safety standards system. Vibration. Methods for measurement on operator's seats of automotive wheel road-construction vehicles
GOST 12.2.002-91: Occupational safety standards system. Agricultural machinery. Methods of safety evaluation.
GOST 12.2.026.0-93: Woodworking equipment safety requirements for design
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.2.048-80: Occupational safety standards system. Saws and flat knives sharpening machines. Safety requirements
GOST 12.2.056-81: Occupational safety standards system. Electric and diesel locomotives for 1520 mm gauge. Safety requirements
GOST 12.2.086-83: Positive displacement hydraulic drives and lubrication systems
GOST 12.2.094-83: Occupational safety standards system. Rolling equipment. General safety requirements
GOST 12.2.102-89: Machines and equipment for timber logging and floating, forestry tractors
GOST 12.2.104-84: Mechanized logging equipment
GOST 12.2.108-85: Occupational safety standards system. Rigs for drilling exploration and hydrogeological holes. Safety requirements
GOST 12.2.115-2002: Operation safety standard system. Blow-out preventers. Safety requirements
GOST 12.2.122-88: Occupational safety standards system. Industrial tractors. Methods for estimation safety
GOST 12.2.130-91: Occupational safety standard system. Single-bucket excavators. General safety and ergonomical requirements for the operator's position and methods of their control
GOST 12.3.017-79: Occupational safety standards system. Automobile maintenance and service. General safety requirements
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12.3.026-81: Occupational safety standards system. Forge-pressing. Safety requirements
GOST 12.3.027-81: Occupational safety standards system. Foundry work. Safety requirements
GOST 12.3.027-92: Foundry work
GOST 12.3.030-83: Occupation safety standards system. Safety requirements. Plastics processing
GOST 12.3.031-83: Occupational safety standards system. Work with mercury. Safety requirements
GOST 12.3.040-86: Occupational safety standards system. Construction. Roofing and water proofing. Safety requirements
GOST 12.4.002-97: Vibration protection means for hands
GOST 12.4.095-80: Occupational safety standard system. Agricultural self-propelled machines. Methods of determination of vibration and noise characteristics
GOST 12375-70: Single-rotor crushers for coarse grinding
GOST 12617-78: Ship's cargo winches. General specifications
GOST 1293.0-83: Lead-antimony alloys. General requirements for methods of chemical analysis
GOST 13556-91: Building tower pillars building tower pillars
GOST 15035-80: Underground scraper winches
GOST 22859-77: Hydraulic auto hoisters
GOST 23080-78: Rotary snowploughs. Acceptance rules and test methods
GOST 23718-93: Passenger and transport aeroplanes and helicopters. Admissible levels of vibration in saloons and crew cabins and methods of vibration measuring
GOST 24282-86: Flexible-way electric powered vehicles. Testing methods
GOST 24282-97: Floor-mounted flexible electrified vehicles. Testing methods
GOST 26699-98: Underground drilling rigs. General specifications and test methods
GOST 26917-2000: Underground loading machines. General technical requirements and test methods
GOST 27412-93: Jaw crushers
GOST 27636-95: Stone extraction and processing equipment
GOST 27962-88: Industrial equipment
GOST 28988-91: Positive-displacement hydraulic drives, pneumatic drives and lubricating systems
GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods
GOST 30938-2002: compressor equipment. Determination of vibration characteristics of small and medium piston compressors and vibration rates
GOST 31594-2012: Machines and tractors for forestry. Test methods of safety requirements
GOST 31827-2012: Liquid centrifugal separators. Safety requirements. Test methods
GOST 31828-2012: Drying and evaporating apparatus and plants. Safety requirements. Test methods
GOST 5534-79: Floating cranes. Specifications
GOST 6113-84: Horizontal expellers for pottery ware
GOST 7090-72: Single-rotor hammer crushers
GOST 9722-79: Nickel powder. Technical requirements
GOST ISO 10326-1-2002: Vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements
GOST ISO 10819-2002: Vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand
GOST ISO 8041-2006: Vibration. Human response to vibration. Measuring instrumentation
GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods
GOST R 50703-94: Heading machines having cutter heads mounted on booms. Test methods
GOST R 50804-95: Cosmonaut's habitable environments on board of manned spacecraft. General medicotechnical requirements
GOST R 51101-97: Metalworking and woodworking machines small-size. Testing methods safety requirements
GOST R 51563-2000: Liquid centrifugal separators. Safety requirements. Test methods
GOST R 51564-2000: Drying and evaporating apparatus and plants. Safety requirements. Test methods
GOST R 51862-2002: Machines and tractors for forestry. Test methods of safety requirements
GOST R 51931-2002: Industrial centrifuges. Safety requirements. Test methods
GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R ISO 10326-1-99: Mechanical vibration. Laboratory method for evaluating vehicle seat vibration. Part 1. Basic requirements
GOST R ISO 10819-99: Mechanical vibration and shock. Method for the measurements and evaluation of the vibration transmissibility of gloves at the palm of the hand
Indication O-1515u: Recommendations for planning labor protection measures in railway transport
Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)
Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)
Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"
Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"
MI 2728-2002: State system for ensuring uniformity of measurements. The list of regulatory documents on security requirements. The order of their application in the normative documents of the ICE
MU 3911-85: Guidelines for measuring and hygienic assessment of production vibrations
MU 3927-85: Guidelines for the sanitary supervision of the design, release of manual machines and the working conditions of workers in vibration-hazard professions
MUK 2.2.2.1843-04: Sanitary-epidemiological examination of gasoline-powered saws and work organization
NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods
OST 24.050.16-85: Passenger coaches. Methods to determine smoothness of movement.
OST 24.050.28-81: Passenger cars. Methods of measurement and evaluation of vibration
OST 24.090.39-78: Shell stacker cranes. Specifications.
OST 36-100.3.13-85: Labour safety standard system. Processing equipment installation. General safety requirements.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
RD 12.23.102-85: Mountain cars. Method for establishing values of noise and vibration characteristics
RD 153-34.0-21.601-98: Model Guidelines for Operation of Process Buildings and Structures of Electric Power Facilities. Part II, Sections 1, 2
RD 22-28-36-01: Lifting cranes. Typical program and test procedure. Standard testing programs and procedures.
RD 31.3.05-97: Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 34.03.502-91: Data Sheet for Sanitary Working Conditions in a Shop
RD 34.21.306-96: Procedural Guidelines for Inspection of the Dynamic State of Structural Elements of Structures and Equipment Foundations at Facilities of the Energy Industry
RD 34.21.622-96: Procedural Guidelines for Inspection of Roof Structures of Main Buildings of Thermal Power Stations
RD 36-62-00: Hoisting equipment. General technical requirements.
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SN 2.5.2.048-96: Vibration levels on board marine ships. Sanitary norms
SP 11-102-97: Engineering environmental site investigations for construction
SP 12-132-99: Occupational Safety and Health in Construction. Draft Standards for Occupational Safety for Professionals Working in Construction and Building Material industries and Public Utilities
SP 23-105-2004: Evaluation of vibration in the design, construction and operation of subway
ST RK 1518-2006: Diesel locomotives. DC electric rotating traction machines. Requirements for acceptance programmes and test procedures
ST SSFZhT TsT 019-99: Locomotives and rolling stock rolling stock of federal and industrial railway transport. Typical test methods for determining the levels: sound and sound pressure, external noise (sound) and vibration (mean square values of vibration accelerations)
ST SSFZhT TsT 077-2001: Diesel locomotives and diesel trains. Typical test method for measuring the vibration of traction and auxiliary equipment.
ST SSFZhT TsT-TsP 099-2003: Locomotives, engine wagon and special self-propelled rolling stock of railways. The driver's seat. Test methods for checking the indicator "Coefficient of vibration transmission of the driver's seat"
ST SSFZhT TsT-TsRB 089-2000: Cranes, type shooting on the course. Typical test methods for determining the levels: sound and sound pressure, external noise (sound) and vibration (mean square values of vibration accelerations)
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TSN 40-303-2003: Trenchless Installation of Utility Lines Using Microtunneling Complexes and Rehabilitation of Pipelines Using Special Equipment
TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type
TU 24.08.1144-79: Car Decker 12U6
VNTP 01/87/04-84: Objects of gas and oil industry, made with the use of block and block-complete devices. Engineering Design Standards
|
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
