GOST 14959-79
ГОСТ 14959-79
|
|
Spring carbon and alloy steel bars. Specifications
Прокат из рессорно-пружинной углеродистой и легированной стали. Технические условия
Status: Not effective - Superseded. Information about the registration of 112-st dated 03/10/2017 (the official website of Rosstandart); IUS 7-2017
The standard applies to hot-rolled and forged long products with a diameter or thickness of up to 250 mm, as well as calibrated and with special surface finishing for the manufacture of springs, springs and other machine parts used in the hardened and tempered condition. In terms of norms of chemical composition, the standard applies to all other types of rolled products, ingots, forgings and stampings.
Стандарт распространяется на горячекатаный и кованый сортовой прокат диаметром или толщиной до 250 мм, а также на прокат калиброванный и со специальной отделкой поверхности, предназначенный для изготовления пружин, рессор и других деталей машин и механизмов, применяемых в закаленном и отпущенном состоянии. В части норм химического состава стандарт распространяется на все другие виды проката, слитки, поковки и штамповки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
3/29/1979
SKU: RUSS20441
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.25 Spring steel »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.25 Spring steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V32 Rolled and shaped steel »
The Document is Replaced With:
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
As a Replacement Of:
GOST 14959-69: Spring steel. Grades and technical requirements
The Document References:
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 103-76: Hot-rolled steel strip. Dimensions
GOST 1051-73: Calibrated quality steel
GOST 1133-71: Forged round and square steel. Dimensions
GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12351-81: Steels alloyed and highalloyed. Methods for the determination of vanadium
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 14955-77: Quality round steel with a special surface finish
GOST 1497-84: Metals. Methods of tension test
GOST 162-90: Depth gauges. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 1763-68: Steel. Methods for determination of decarbonised layer depth
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 22091.11-80: X-ray devices. The method of the measuring of the time operation readiness of the device
GOST 2216-84: Adjustable smooth snap gauges
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.14-88: Carbon steel and unalloyed cast iron. Methods for determination of zirconium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions
GOST 2590-88: Round steel bars. Dimensions
GOST 2591-88: Square Hot-rolled Steel Bars Dimensions
GOST 26877-91: Metal products
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 2879-88: Hot-rolled hexagonal steel. Range of sizes
GOST 3749-77: Checking 90° squares. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4405-75: Hot-rolled and wrought tool steel strips. Dimensions
GOST 5378-88: Vernier protractors. Specifications
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 5657-69: Steel. Methods for the determination of hardenability
GOST 6507-90: Micrometers. Specifications
GOST 7417-75: Calibrated round steel
GOST 7419-90: Hot-rolled tool steel for springs
GOST 7502-98: Measuring metal tapes. Specifications
GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 7566-94: Metal products
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8559-75: Square bar steel. Products sizes
GOST 8560-78: Calibrated hexahedral rolled stock
GOST 9012-59: Metals. Method of Brinell hardness measurement
OK 005-93: All-Russia Classification of Products (Part 1)
OK 005-93: All-Russia Product Classification (OKP) (Part 13)
OK 005-93: All-Russia Classification of Products (OKP)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Product Classification (OKP) (Part 3)
OK 005-93: All-Russia Classification of Products (OKP) (Part 4)
OK 005-93: All-Russia Classification of Products (Part 5)
OK 005-93: All-Russia Classification of Products (Part 6)
OK 005-93: All-Russia Product Classification (OKP) (Part 7)
OK 005-93: All-Russia Classification of Products (OKP) (Part 8)
OK 005-93: All-Russia Classification of Products (part 9)
OK 005-93: All-Russia Classification of Products (OKP) (Part 10)
OK 005-93: All-Russia Classification of Products (Part 11)
OK 005-93: All-Russia Classification of Products (part 12)
OK 005-93: All-Russia Classification of Products (OKP) (Part 14)
OK 005-93: All-Russia Classification of Products (part 15)
OK 005-93: All-Russia Classification of Products (Part 16)
OK 005-93: All-Russia Classification of Products (Part 17)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 19)
OK 005-93: All-Russia Classification of Products (Part 18)
OK 005-93: All-Russia Classification of Products (Part 21)
OK 005-93: All-Russia Classification of Products (OKP) (Part 22)
The Document is Referenced By:
FTS ZhT TsT-TsV-TsL 062-2000: Rolling stock of railways. Springs cylindrical screw. Certification requirements
GOST 10083-81: Taper reamers with taper shank
GOST 10110-87: Circles diamond
GOST 10234-77: Moderate strength flattened
GOST 10403-80: Constructional steel trowels. Technical requirements
GOST 10461-81: Shake-proof washers with teeth. General specifications
GOST 1051-73: Calibrated quality steel
GOST 1071-81: Heat treated steel spring wire
GOST 10778-83: Spatulos. Specifications
GOST 11648-75: Quick removable thrust washers. Specifications
GOST 11850-72: Steel wire for spring washers
GOST 1203-75: The key of the brake shoe for cars of the railways with broad gauge 1520 mm. Specifications
GOST 12375-70: Single-rotor crushers for coarse grinding
GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications
GOST 12492.15-90: Flat section with slope for agriculture machinery
GOST 12935-76: Free wheeling clutch of agricultural machines. Specifications
GOST 13556-91: Building tower pillars building tower pillars
GOST 13764-86: Cylindrical helical compression (tension) springs made of round steel. Classification
GOST 13932-80: Combined arbor-type circular mills for woodcutting
GOST 13944-86: Retaining spring flat rings and grooves for them. Specifications
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 14229-78: Spring pins. Specification
GOST 1425-76: Leaf springs for railway rolling stock. Technical requirements
GOST 1425-93: Lief springs for railway rolling stock. Technical requirements
GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 1452-86: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
GOST 14963-78: Doped steel spring wire
GOST 1530-78: Tape hot-rolled (rolled) from carbon quality construction steel. Specification
GOST 15598-70: Piano steel wire
GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications
GOST 1577-93: Plate and broadband roll stock of construction fine steel.
GOST 15850-84: Mine parachutes for cages
GOST 16339-70: Support holders for a 250 and 500 kg force rolling heads. Construction and dimensions
GOST 16340-70: Support holders for 1000 and 2000 kg force rolling heads. Construction and dimensions
GOST 16341-70: Support holder for a 4000 kg force rolling head. Construction and dimensions
GOST 17017-71: Carbide tools for making holes in building materials. Technical requirements
GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications
GOST 17199-88: Fitter’s screwdrivers
GOST 17201-71: Gripping collets for cutting tools with cylindrical shank. Design
GOST 17528-72: Spindle cam arbors. Design and dimensions
GOST 17530-72: Flanged cam arbors. Design and dimensions
GOST 18578-89: Builders axes. Specifications
GOST 18761-80: Cylindrical blank holders. Design and dimensions
GOST 19115-91: Railway lock washers. Specifications
GOST 19126-2007: Medical metallic instruments. General specifications
GOST 19598-95: Lawn-and-garden hoes, grub-axes and cultivators
GOST 20365-74: Broaches round of variable cutting of diameters from 14 to 90 mm. Design and dimensions
GOST 21010-75: Dielectric screwdrivers
GOST 21797-2014: Two-turn spring washers for railway track. Specifications
GOST 21797-76: Two-turn spring washers for railway track. Technical specifications
GOST 21963-82: Cutoff wheels
GOST 21996-76: Cold-rolled heat treated steel-cord belt
GOST 21997-76: Steel flattened strip of high strength
GOST 22629-77: Movable chasing chucks for automatic lathes. Design and dimensions
GOST 2283-79: Cold-rolled tape made of tool steel and spring steel
GOST 2284-79: Cold-rolled carbon structural steel strip
GOST 23211-78: Units of versatile compound dies for clipping and piercing of round in plan vien die forgings on crank presses. Design and dimensions
GOST 23270-89: Tube-billets for machining
GOST 24474-80: Marking tools
GOST 24559-81: Sheet stamping dies. Check spring rings. Design and dimensions
GOST 25084-89: Universal dies with replaceable built-up tool sets
GOST 25605-83: Hand operated socket wrenches and drive parts
GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification
GOST 25878-85: Steel moulds for reinforced concrete members. Pallets. Construction and dimensions
GOST 26215-84: Hand-held wood-saws
GOST 26366-84: Brass-plated steel wire for base rings of tires
GOST 26394-84: Tools for cold upset automatic machines. Hard alloy insert cutters for cutting off bolt blanks with shank length up to five diameters. Construction and dimensions
GOST 26395-84: Tools for cold upset automatic machines. Hard alloy insert cutters for cutting off bolt blanks with shank length above five diameters. Construction and dimensions
GOST 26505-85: Tools for cold-forming machines. Gutters Construction and dimensions
GOST 26509-85: Tools for cold-forming machines. 3rd station dies. Construction and dimensions
GOST 26510-85: Tools for cold-forming machines. 4Th station dies. Construction and dimensions
GOST 26512-85: Tools for cold-forming machines. 1St station punches. Construction and dimensions
GOST 26513-85: Tools for cold-forming machines. 2-D station punches. Construction and dimensions
GOST 26514-85: Tools for cold-forming machines. 3rd station punches. Construction and dimensions
GOST 26515-85: Tools for cold-forming machines. 4Th station punches. Construction and dimensions
GOST 26596-2016: Face milling cutters with mechanically clamped indexable carbide inserts. Specifications
GOST 26596-91: Non-adjustable milling cutters
GOST 26613-2016: Lathe tools with mechanically clamped changeable indexable inserts. Specifications
GOST 26613-85: Lathe tools with mechanic fastening of replaceable faceted plates
GOST 27358-87: Press moulds for manufacturing of plastic items
GOST 27702-88: Steel and alloys. Unified grades
GOST 27724-88: Drills with mechanical fixation of replaceable polyhedral plates
GOST 28241-89: Hand wise. Specification.
GOST 28244-89: Reinforced wires and cords. Specifications
GOST 28433-90: Retrievers
GOST 28434-90: Overhead travelling stacker cranes
GOST 28436-90: End mills with mechanically clamped insrtr tips
GOST 28438-90: Disk milling cutters with mechanically clamped many-sided hard-alloy inserts
GOST 28516-90: Rotary tillers
GOST 28648-90: Crane wheels
GOST 28709-90: Helical end mills with elongated body and hard-alloyed change inserts
GOST 28719-90: Shell-type helical-flute cylindrical face milling cutters with replaceable carbide inserts
GOST 2876-80: Gripping collets. Basic and coupling dimensions
GOST 2877-80: The grips giving. Main and connecting dimensions
GOST 3057-90: Disk springs. Specifications
GOST 30632-99: Brake block holder and key for 1520 mm main-line locomotives. General specifications
GOST 31.1066.01-85: Attachments for metall-cutting machine tools. Central readjustable mandrels with corrugated bushings for precision machining. Basic parameters and dimensions
GOST 31.1066.02-85: Attachments for metall-cutting machine tools. Mandrels with split collets for precision machining. Basic parameters and dimensions
GOST 31.1066.04-97: Attachments for metal-cutting tools. Cam arbors. General specifications
GOST 31.111.42-83: Parts and subunits of modular work tools for metal-cutting machines
GOST 31.121.42-84: Elements and assemblies of universal built-up and re-adjustable equipment for metal-cutting machines
GOST 31.2031.02-91: Readjusted collapsible devices for part assembly under welding
GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties
GOST 32205-2013: Springs of spring suspensions of railway rolling stock. Scale of microstructure standards
GOST 32409-2013: Spring anchors to railway rails. Technical specification
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 33186-2014: Clamp of spring rod for mounting rails. Specifications
GOST 33187-2014: Disk springs for rail joints. Specifications
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33535-2015: Connections and crossings of railway tracks. Specifications
GOST 33556-2015: Leaf springs of motor vehicles. Requirements and test methods
GOST 3396-90: Leaf springs of motor vehicles. General specifications
GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications
GOST 3449-84: Taps. Specifications
GOST 3849-78: Accessories for vertical cylindrical strorace tank for pertoleum products. Cast iron joints for swing tube
GOST 3875-83: Steel card wire
GOST 4047-82: Rim saws for metal cutting
GOST 4230-93: Garden knives
GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications
GOST 7090-72: Single-rotor hammer crushers
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 7372-79: Steel wire for ropes
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7524-2015: Steel grinding balls for ball mills. Specifications.
GOST 7703-74: Signalling shapes of ship. Specifications
GOST 8.376-80: State system for ensuring the uniformity of measurements. Universal instruments for measuring solvents. Methods and means of verification
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8802-78: Passenger tram-cars. Specifications
GOST 9124-85: Binding tin-coated steel wire
GOST 9274-81: Rolls for stone separating and ceramic mixture grinding
GOST 9389-75: Carbon steel spring wire
GOST 9533-81: Trowels, tuck pointing tools. Specifications
GOST 9652-68: Shutoff Devices of level indicators of liquids for Pd up to 40 kgf / cm2. Specification
GOST 9769-79: Wood-working carbide-tipped circular saw
GOST 9850-72: Zinc-coated steel core wire
GOST R 51268-99: Scissors. General specifications
GOST R 51585-2000: Leaf springs of motor vehicles. General specifications
GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53811-2010: Automobile engines. Valve springs. Technical requirements and test methods
GOST R 53843-2010: Engines of vehicles. Piston rings. Technical requirements and test methods
GOST R 53932-2010: Tube billet. General specifications
GOST R 53935-2010: Screwdrivers for fitting and assembling for recessed screws and wood screws. General technical requirements, methods of control and tests
GOST R 54128-2010: Tractive railway rolling stock. Springs of spring suspensions
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54407-2011: Orthopaedic shoe. General technical specifications
GOST R 54490-2011: Superhard tipped circular saws for machining wood materials and plastics. General specifications
GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications
GOST R 55853-2013: Medium speed roller mill. Types, critical parameters, specification
IM 4-12-95: Automation systems. Handbook of materials. Part 1. Basic materials
MI 1532-86: Guidelines. GSE. Levels frame and squared for mechanical engineering. Method of verification
MU 34-13-21-86: Methods of determining the sizes and classes of helical compression and tension coil springs made of round steel
NB ZhT TsP 110-2003: Spring terminals of a flawless separate fastening ZhBR-65. Safety standards
OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.
OST 24.090.39-83: Shell stacker cranes. General specifications.
OST 24.125.102-01: CHP and NTPP pipeline suspensions. Plugs. Design and dimensions.
OST 24.125.109-01: CHP and NTPP pipeline suspensions. Screw cylindrical springs. Design and dimensions.
OST 26-07-2027-80: Symbols of materials in the design documentation.
OST 37.001.027-90: Cylindrical helical springs for vehicle suspension.
OST 3-98-80: Constructional and spring refining steel. Technical requirements.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PNST 13-2012: Nanostructured screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications
PNST 14-2012: Machine nanostructured springs. Specifications
R 412-81: Recommendations for the design and construction of offshore subsea oil and gas pipelines
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 31.44.01-97: Rules of technical operation of lifting and transport equipment of sea trading ports
RD 31.55.08.01-89: Iron casting. Materials charge and auxiliary. Consumption rates
RD 32 TsV 052-2005: Repair of freight car trucks
RD 39-0147014-348-89: Guidelines for Corrosion Protection of Field Equipment Using Domestically Manufactured Inhibitors
RD 39-3-221-79: Instructions for corrosion protection of oilfield equipment using inhibitors of types IA, ID
RST RSFSR 605-89: Folding knives. General technical conditions
RST RSFSR 656-81: Apparatus for processing vegetables and fruits. Technical conditions
RUPK-78: Guidelines for the operation, inspection and repair of spring safety valves
SP 268.1325800.2016: Transport structures in seismic zones. Specifications for earthquake-resistant design
ST SSFZhT TsT-TsV-TsL 084-2000: Rolling stock of railways. Springs cylindrical screw carriages. Typical test method.
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 008-2014: Pipe fittings. Calculation and evaluation of reliability and safety at the design stage
ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions
ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments
ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation
STB 1274-2001: Suspensions for road vehicles made of sheet metal. General specifications
TU 26-14-99-91: DP-10M smoke exhauster. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.