imgalt

GOST 15.001-88

ГОСТ 15.001-88

System of product development and launching into manufacture. Products of industrial and technical designation

Система разработки и постановки продукции на производство. Продукция производственно-технического назначения

Status: Not effective - Canceled in the Russian Federation

The standard establishes the main provisions of the development and production of new (modernized) national economic production for industrial purposes. Provisions of the standard are provided by the customer (the main consumer), the developer and the manufacturer when creating and mastering the products. Disagreements between them regarding the application of the standard are resolved by the USSR State Standard on the basis of their presentation.

Стандарт устанавливает основные положения разработки и постановки на производство новой (модернизированной) народнохозяйственной продукции производственно-технического назначения. Положения стандарта обеспечиваются заказчиком (основным потребителем), разработчиком и изготовителем при создании и освоении продукции. Разногласия между ними по применению стандарта разрешает Госстандарт СССР по их представлению.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 11/25/1988

SKU: RUSS20442

Price: $53.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 1. Organizational and methodological regulatory documents » k.13 Operation »

Construction (Max) » Standards » Other state standards used in construction » 01 General. Terminology. Standardization. Documentation »

PromExpert » SECTION I. TECHNICAL REGULATION » III Quality » 2 Product quality assurance » 2.1 Ensuring product quality at stage of technical preparation of production » 2.1.2 Technological preparation of production »

ISO classifier » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.110 Technical product documentation »

National standards » 01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION » 01.110 Technical product documentation »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T5 Documentation System » T52 Design Documentation System »

National Standards for OKSTU » SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS » Development and launch of products for production »


As a Replacement Of:

GOST 15.001-73: Products development and launching into manufacture. General principles

The Document is Referenced By:

GOST 10448-80: Marine, locomotive and industrial engines. Acceptance. Test methods

GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications

GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions

GOST 10708-82: Pendulum impact machines

GOST 10935-97: Box-cars for 1520 mm gauge main line railways. General specifications

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements

GOST 12.1.023-80: Noise. Determination methods of stationary machine noise characteristics values

GOST 12.2.004-75: Occupational safety standards system. Special machines and devices for pipe-line building. Safety requirements

GOST 12.2.011-75: Construction and road machines

GOST 12.2.015-93: Machines and equipment for glass industry. General safety requirements

GOST 12.2.016.5-91: Compressor equipment

GOST 12.2.016-81: Occupational safety standards system. Gas compressing equipment. General safety requirements

GOST 12.2.026.0-2015: Woodworking machinery. Construction safety requirements

GOST 12.2.026.0-93: Woodworking equipment safety requirements for design

GOST 12.2.029-88: Machine tool attachments

GOST 12.2.036-78: Press moulds for mechanical-rubber articles

GOST 12.2.037-78: Fire engineering. Safety requirements

GOST 12.2.055-81: Ferrous and nonferrous scrap and waste metal processing equipment

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 12.2.094-83: Occupational safety standards system. Rolling equipment. General safety requirements

GOST 12.2.100-84: Occupational safety standards system. Machines and equipment for manufacturing clay and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.100-97: Machines and equipment for manufacturing clau and lime brick, ceramic and asbestos cement products. General safety requirements

GOST 12.2.124-90: The food industry equipment

GOST 12.2.139-97: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST 12434-83: Low-voltage switching devices. General specifications

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 13547-2015: Pipeline valves. Butterfly wicket valves. General specifications

GOST 14291-83: Document liquidation machines. General specifications

GOST 14693-90: Unsealed metal-enclosed switchgear

GOST 15.009-91: Non-food consumer goods

GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions

GOST 15.311-90: System of product development and launching into manufacture. Launching of products under foreign companies technical documents

GOST 16014-78: Diamond rollers for dressing of abrasive wheels. Specifications

GOST 16140-77: Collapsible racks. Specifications

GOST 16308-84: Thermal current relays. General specifications

GOST 16349-85: Cyclic mixers for building materials

GOST 16391-80: Single bucket front loaders. Acceptance rules and test methods

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16765-87: General-purpose self-propelled boom cranes. Acceptance and testing methods

GOST 16837-79: Flameproof mine power transformers. General specifications

GOST 17006-80: Diamond cylinder wheels

GOST 17335-79: Positive displacement pumps

GOST 17366-80: Welded thick-walled steel barrels for chemical products

GOST 17601-90: Marine centrifugal separators. Acceptance and methods of tests

GOST 17717-79: Alternating-current load-break cutouts for voltages of 3 to 10 kv

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18142.1-85: Semiconductor power rectifiers of 5 plus kw capacity

GOST 18962-86: Floor-mounted machines of railless electric transport

GOST 18962-97: Vehicles, floor, trackless battery-powered

GOST 19822-88: Industrial container. Specifications

GOST 1983-2001: Voltage transformers. General specifications

GOST 1983-2015: Voltage transformers. General specifications

GOST 19930-91: Sewing domestic machines. General specifications

GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation

GOST 2.102-68: Types and complete set of design documents

GOST 2.114-2016: Unified system for design documentation. Specifications

GOST 2.114-95: Unified system for design documentation. Specifications

GOST 20260-80: General-purpose containers

GOST 20680-2002: Mechanical mixing devices (agitated vessels). General specifications

GOST 21.401-88: System of design document for construction. Production technology. Main requirements to working drawings.

GOST 21552-84: Computers and computer

GOST 21744-83: Multilayer metal bellows. General specifications

GOST 22045-89: Overhead travelling single-beam cranes. Specifications

GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations

GOST 22789-94: Low-voltage unitized devices

GOST 22908-78: Dresser diamonds. Specifications

GOST 23118-99: Steel construction structures General Technical Specifications

GOST 23125-95: Temperature signalling devices. General specifications

GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export

GOST 23468-85: Micro calculators

GOST 23543-88: Geodesic instruments

GOST 23544-84: Ropes of wires for electrical equipment of cars and tractors

GOST 23624-2001: Measuring laboratory current transformers. General specifications

GOST 23625-2001: Measuring laboratory voltage transformers. General specifications

GOST 24106-80: Nitride bore grinding wheels

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications

GOST 24376-91: Semiconductor inverters

GOST 24607-88: Semiconductor frequency converters

GOST 24624-81: Hydraulic presses for gluing of soles to the footwear

GOST 24644-81: Spindle noses and tool shanks of drilling, boring and milling machines. Dimensions. Technical requirements

GOST 25251-82: Electric gantry cranes. Testing methods

GOST 25277-82: Filtering elements for volume hydraulic drives and lubricant systems

GOST 25593-83: Diamond pastes

GOST 25594-83: Honing diamond bars

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 25804.1-83: Atomic power station technological processes control system equipment. General

GOST 25804.5-83: Atomic power station technological processes control system equipment. General rules of conducting test specimens and serial items test and acceptance

GOST 2582-81: Electric rotatory traction machines

GOST 25836-83: Tractors. Testing types and programs

GOST 25932-83: Portable radioisotope soil and concrete moisture and density gauges. General specifications

GOST 26.205-88: Telemechanics complexes and devices

GOST 26053-84: Industrial robots. Acceptance rules. Methods of test

GOST 26140-84: Medical x-ray units

GOST 26265-84: Standardization in the field of service. Basic provisions

GOST 26598-85: Containers and means of packaging in building industry

GOST 26646-90: Stationary distillation desalinization units

GOST 26725-97: Freight gondolas for main lines with the track 1520 mm. General specifications

GOST 26881-86: Stationary leaden batteries

GOST 26891-86: Aerosol valves, spray heads and caps

GOST 26980-95: Single bucket excavators. General specifications

GOST 27173-86: Spectrometric units and devices for detection of ionizing radiation

GOST 27372-87: Travelling cradles for constructional works. Specifications

GOST 27451-87: Ionizing radiation measurement instruments

GOST 27816-88: Asphalt paver. Test methods

GOST 28167-89: Semiconductor alternating voltage converters. General specifications

GOST 28301-2015: Grain harvesters. Test methods

GOST 28347-89: Rolling scaffold with movable working place. Specifications

GOST 28718-2016: Agricultural machinery. Machine for introduction of solid organic fertilizers. Test methods

GOST 28722-2018: Agricultural machinery. Mowers and mower conditioners. Test methods

GOST 28724-90: Speed gas meters

GOST 28873-90: Alloys on the basis of heavy non-ferrous metals treated under pressure. Unified grades

GOST 29024-91: Turbidimetric and nephelometric liquid analyzers

GOST 29226-91: Viscometers for liquids

GOST 30011.4.1-96: Low-voltage switchgear and control gear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters

GOST 30135-94: Fabric knitting carcasses for fire hoses. General specifications

GOST 30243.1-97: Open hopper wagons of 1520 mm gauge for the loose materials. General specifications

GOST 30243.2-97: Covered hopper wagons of 1520 mm gauge for the transport of cement. General specifications

GOST 30243.3-99: Covered hopper wagons for loose materials of 1520 mm gauge. General specifications

GOST 30248-2013: Electrical carbon products. Electrical heating appliances made of carbon fibre materials. General specifications

GOST 30249-97: Cast iron brake blocks for locomotives. Specifications

GOST 30277-95: Synthetic bulky fabrics for technical use. General specifications

GOST 30379-95: Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference

GOST 30487-97: Electric train for suburban communication. General safety requirements

GOST 30549-98: Dump cars for 1520 mm railway gauge. Requirements safety

GOST 30646-99: Central conditioners of general use. General specifications.

GOST 30776-2002: Oil field mobile pumping units. General specifications

GOST 30850.1-2002: Switches for household or similar stationary electrical facilities. Part 1 General requirements and test methods.

GOST 30872-2002: Air cooling machines. General specifications

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31521-2012: Food рrocessing machinery. Сutting machines for meat. Specifications

GOST 31522-2012: Food processing machinery. Dough and pastry brakes. Specifications

GOST 31523-2012: Food processing machinery. Dough mixers. Specifications

GOST 31524-2012: Food processing machinery. Moulders. Specifications

GOST 31525-2012: Food processing machinery. Band saw machines. Specifications

GOST 31526-2012: Food processing machinery. Circular saw machines. Specifications

GOST 31527-2012: Food processing machinery. Intermediate provers. Specifications

GOST 31538-2012: Live-cycle of railway rolling stock. General requirements

GOST 31543-2012: Metal forging machines. Noise characteristics and methods of their determination

GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33423-2015: Pipeline valves. Swing and lift check valves. General specifications

GOST 33677-2015: Machines and tools for row and row tillage. Methods of tests

GOST 33686-2015: Machines for transportation and application of liquid fertilizer. Methods of tests

GOST 33687-2015: Machines and tools for surface treatment of soil. Methods of tests

GOST 33734-2016: Agricultural machinery. Combines and machines for cleaning up of flax. Test methods

GOST 33735-2016: Agricultural machinery. Grain-cleaning machines. Test methods

GOST 33736-2016: Agricultural machinery. Machines for deep tillage. Test methods

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 33982-2016: Fire fighting equipment. Personal respiratory and vision protection. Self-rescue insulating type. General technical requirements. Test methods

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 34069-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing

GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications

GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications

GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications

GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications

GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications

GOST 34293-2017: Pipeline valves. Metal ball valves for petroleum, petrochemical and allied industries. General specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34350-2017: Fire-fighting techniques. Fire extinguishing trucks. General technical requirements. Test methods

GOST 34390-2018: Agricultural machinery. Machines for harvesting the tops of root crops. Test methods

GOST 34391-2018: Agricultural machinery. Technical grape harvesting machines. Test methods

GOST 34392-2018: Agricultural machinery. Planting machines. Test methods

GOST 34433-2018: Trunk pipelines for oil and oil products transportation. Transformer complete substations with voltage from 35 to 220 kV. General specifications

GOST 34473-2018: Pipe fittings. Cranes spherical steel all-welded for water thermal networks. General technical conditions

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 34635-2020: Fire-fighting equipment. Generators of fire-extinguishing aerosol. General technical requirements. Test methods

GOST 34904-2022: Ship pipeline valves. General specifications

GOST 533-2000: Rotating electrical machinery. Turbo-generators. General specifications

GOST 5534-79: Floating cranes. Specifications

GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications

GOST 5762-2002: Pipeline industrial valves. Gate valves PN<=250. General specifications

GOST 5875-77: Electric and hydraulic anchor gears. Types, main parameters, technical requirements and acceptance rules

GOST 588-81: Hauling leaf chains

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 5973-91: Dump cars for 1520 mm railway gauge. General specifications

GOST 5976-90: Centrifugal fans for general use

GOST 607-80: Single point diamonds for dressing of grinding wheels

GOST 6616-94: Thermoelectric converters. General specifications

GOST 6651-94: Thermal converters of resistance. General technical requirements and test methods

GOST 7370-2015: Railway frogs. Specifications

GOST 7746-2001: Current transformers. General specifications

GOST 7746-2015: Current transformers. General specifications

GOST 7746-89: Current transformers. General specifications

GOST 8.315-91: State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use

GOST 8.315-97: Standard samples for composition and properties of substances and materials

GOST 8854-75: Typewriters. Types, type styles, shift distances. Specifications

GOST 8904-81: Hard wood-fibre boards with varnish and paint coatings. Specifications

GOST 8942-85: Roll paper tape for printers. Specifications

GOST 8994-80: Wood-cutting cylindrical end milling cutters

GOST 9078-84: Flat pallets

GOST 9601-84: Power track (limit) switches. General specifications

GOST 9630-2018: Three-phase asynchronous motors with voltages above 1000 V. General specifications

GOST 9630-80: Three-phase asynchronous motors. General specifications.

GOST 9891-76: Electric and hydraulic capstans. Types, main parameters, technical requirements and acceptance rules

GOST R 1.3-92: State standardization system of the Russian Federation. The procedure for approval, approval and registration of technical conditions

GOST R 1.5-2002: State system for standardization of Russian Federation. Standards. General requirements for structure, drafting, presentation, content and indication

GOST R 15.013-94: System of product development and launching into manufacture. Medical products

GOST R 50009-92: Electromagnetic compatibility of technical means of protection fire-alarm and fire-protection systems. Requirements, standards and methods of tests on interference immunity and industrial interference

GOST R 50030.1-2000: Low-voltage switchgear and controlgear. Part 1. General rules and test methods

GOST R 50030.2-99: Low-voltage switchgear and controlgear. Part 2. Circuit-breakers

GOST R 50030.3-99: Low -voltage switchgear and controlgear. Pat 3. Switchers, disconnectors, switch-disconnectors and fure-combination units

GOST R 50030.5.1-99: Low-voltage switchgear and control gear. Part 5.1. Control circuit devices and switching elements. Electromechanical control circuit devices

GOST R 50030.5.2-99: Low-voltage switchgear and controlgear. Part 5-2. Control circuit devices and switching element. Proximity switches

GOST R 50030.6.2-2000: Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section 2. Control and protective switching devices (or equipment)

GOST R 50030.7.1-2000: Low-voltage switchgear and controlgear. Part 7. Ancillary equipment. Section 1. Terminal blocks for copper conductors

GOST R 50030.7.2-2000: Low-voltage switchgeal and controlgear. Part 7. Ancillary equipment. Section 2. Protective conductor terminal blocks for copper conductors

GOST R 50031-99: Circuit-breakers for equipment (CBE)

GOST R 50339.0-92: Low-voltage fuses. General requirements

GOST R 50353-92: Resistive temperature transducers. General specifications

GOST R 50573-93: Metal forging machines. Noise characteristics and methods of their determination

GOST R 50612-93: Machines and equipment for manufacturing of sugar. Safety requirements

GOST R 50761-95: Marine, locomotive and industrial diesels. General safety requirements

GOST R 50906-96: Pile driving equipment. General safety requirements

GOST R 50910-96: Metal frame yield supports. Test methods

GOST R 50911-96: Agricultural machinery. Maintenance-production equipment. General safety requirements

GOST R 50940-96: Electroshock batons. General specifications

GOST R 51017-97: Fire engineering. Wheeled fire extinguishers. General technical requirements. Test methods

GOST R 51057-97: Fire engineering. Portable fire extinguishers. General technical requirements. Test methods

GOST R 51114-97: Automatic water and foam fire fighting systems. Feeder. General technical requirements. Test methods

GOST R 51126-98: Liquid vacuum and gravitation filters. Safety requirements and test methods

GOST R 51127-98: Liquid filters periodic action, working under pressure. Safety requirements and test methods

GOST R 51176-98: Petroleum products. Mounting of technical conclusion (admission) for production and application

GOST R 51269-99: TV receiving aerials for television and sound broadcasting stations in VHF and UHF frequency bands. General technical requirements

GOST R 51289-99: Returnable polymeric boxes. General specifications

GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests

GOST R 51321.3-99: Low-voltage switchgear and control gear assemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use. Distribution boards

GOST R 51321.5-99: Low-voltage switchgear and control gear assemblies. Part 5. Particular requirements for assemblies intended to be installed outdoors in public places. Cable distribution cabinets (CDCs) for power distribution in networks

GOST R 51324.1-99: Switches for household and similar fixed electrical installations. Part 1. General specifications and methods of tests

GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests

GOST R 51327.1-99: Residual current operated circuit-pressers with integral overcurrent protection for household and similar use. Part 1. General requirements and test methods

GOST R 51328-99: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51365-99: Control head oil field equipment. General specifications

GOST R 51539-99: Cable reels for household and similar purposes. General requirements and test methods

GOST R 51558-2000: Television systems of security. General technical requirements and test methods

GOST R 51567-2000: Staff of traffic-controller. General specifications

GOST R 51595-2000: Non-traditional power engineering. Solar power engineering. Solar collectors. General specifications

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 51686.1-2000: Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Part 1. General requirements and particular requirements for clamping units for conductors from 0,2 up to 35 sq. mm (included)

GOST R 51701-2000: Connecting devices. Devices for the connection of aluminium conductors in clamping units of any material and copper conductors in aluminium bodied clamping units. General requirements and methods of tests

GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods

GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods

GOST R 53323-2009: Flame arrestors and spark arrestors. General technical requirements. Test methods

IN 4-7-92: Index of regulatory and technical documents (as of 01.03.92)

Manual 431: Recommendations on the design of communication systems, informatization and dispatching of residential construction facilities

Manual for SNiP 11-01-95: Guide to SNiP 11-01-95 on the development of the section of project documentation "Environmental Protection"

Manual for SNiP 11-01-95: The manual on the initial requirements for the development of design documentation for equipment of individual production (to SNiP 11-01-95)

Manual for SNiP 11-01-95: A collection of explanations of certain provisions and the contents of paragraphs of the Instructions on the procedure for the development, coordination, approval and preparation of project documents for the construction of enterprises, buildings and structures of SNiP 11-01-95 (Questions and Answers)

Manual for SNiP 11-01-95: A guide to SNiP 11-01-95 on the development of a section of project documentation "Organization and working conditions of workers. Production and enterprise management"

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MI 2002-89: State system for ensuring uniformity of measurements. Information measuring systems. Organization and procedure for metrological certification

MI 2418-97: State system for ensuring uniformity of measurements. Classification and application of technical means for testing oil and petroleum products

MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement

MR 21.03-99: Handbook on Initial Requirements for Development of Engineering Documents for Custom-Manufactured Equipment (for SNIP 11-01-95, GOST 21.401-88, and GOST 21.114-95)

MU 3927-85: Guidelines for the sanitary supervision of the design, release of manual machines and the working conditions of workers in vibration-hazard professions

MU 4.3.1517-03: Sanitary-epidemiological assessment and operation of aeroionizing equipment

NPB 152-2000: Fire equipment. fire hose. Technical requirements of fire safety. Test methods

NPB 152-96: Fire hose. General technical requirements. Test Methods

NPB 153-96: Connecting heads for fire equipment. Basic Indexis. Test Methods

NPB 154-96: Fire valves. Basic Indexis. Test Methods

NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods

NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods

NPB 157-99*: Firefighter's combat clothing. General technical requirements. Test methods

NPB 158-97*: Special protective shoes for firefighters. General technical requirements and test methods

NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods

NPB 161-97*: Special protective clothing for firefighters against increased heat. General technical requirements. Test methods

NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods

NPB 164-97*: Fire fighting equipment. Oxygen gas masks (respirators) for firefighters. General technical requirements and test methods

NPB 167-97*: Fire rescue rope. General technical requirements. Test methods

NPB 168-97*: Firefighter carbine. General technical requirements. Test methods

NPB 170-98*: Extinguishing powder for general purposes. General technical requirements. Test methods

NPB 171-98*: Manual fire ladders. General technical requirements. Test methods

NPB 172-98*: Fire rescue belts. General technical requirements. Test methods

NPB 173-98*: Helmets are fire. General technical requirements. Test methods

NPB 174-98*: Fire extinguishing powders for special purposes. General technical requirements. Test methods. Classification

NPB 177-99: Fire-fighting equipment. Hand nozzles. General technical requirements. Test methods

NPB 180-99: Fire engineering. Fire vehicles. Development and putting into production

NPB 182-99: Fire engineering. Individual protective equipment of hand for firemen. General technical requirements. Test methods

NPB 183-99*: Fire fighting equipment. The catchment is hose. General technical requirements. Test methods

NPB 184-99*: Fire fighting equipment. Fire column. General technical requirements. Test methods

NPB 186-99: Fire equipment. Compressor unit for filling of iow-volume balloons with compress air breathing apparatus for fireman. General technical requirements. Test methods

NPB 187-99: Fire escape chute devices. General technical requirements. Methods of test

NPB 188-2000: Fire aerial ladder. General technical requirements. Test methods

NPB 189-00: Fire-fighting equipment. Air-foam nozzles. General technical requirements. Test methods

NPB 192-2000: Fire engineering. Communnication and lighting truck. General technical requirements. Test methods

NPB 193-2000: Fire rope descenders. Technical requirements of fire safety. Test methods

NPB 194-2000: Fire engineering. Smoke ejector truck. General technical requirements. Test methods

NPB 196-2000: Fire-fighter clothing for regions of Russia with the temperate cold, cold and very cold climate. Technical fire safety requirements. Test methods

NPB 197-2001: Fire elevators. General technical requirements. Test methods

NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods

NPB 200-2001: Fire-fighting equipment. Foammixers. General technical requirements. Test methods

NPB 237-97: Building constructions methods of fire-resistance testing of cable penetrations and enclosed cable inputs. Building construction. Methods of fire-resistance testing of cable penetrations and enclosed cable inputs

NPB 254-99: Flame arrestors and spark arrestors. General technical requirements. Test methods.

NPB 305-2001: Fire engineering. Charge of foam extinguishers and foam fire fighting sistems. General technical requirements and test methods

NPB 307-2002: Fire fighting vehicles. Designation

NPB 312-2003: Fire engineering. Rescue vehicle. General technical requirements. Test methods

NPB 316-2003: Portable and movable devices of fire extinguishing with high-velocity submission of fire quenching matter. Requirements of fire safety. Test methods

NPB 61-97: Fire engineering. Foam fire fighting systems. Low expansion foam generators for subsurface fire fighting systems of the tanks. General technical requirements. Test methods

NPB 63-97: Automatic foam fire extinguishing installations feeders. general technical requirements. test methods

NPB 67-98: Automatic dry chemical fire fighting systems. Module. General technical requirements and test methods

NPB 80-99: Automatic fire water mist spray extinguishing systems. modules. General technical requirements. Test methods

OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,

ORMM-3 ASUTP: Industry-wide guidance materials on the creation and use of automated process control systems in industries (ORMM-3 process control systems)

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 13-26.1-82: System for development and launch of new products. Production of woodworking industries

OST 14-1-7-84: System for development and launch of new products. Iron and steel products, the procedure for the development and launch of new products

OST 24.030.46-74: Stationary steam boilers. Procurement. General Specifications.

OST 24.050.37-84: Freight and passenger coaches. Testing methods for mechanical strength and ride performance.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26-06-2028-96: Labour safety standard system. General purpose industrial grade pumps. Safety requirements.

OST 32.64-97: Industry standard. Kinds. Contents and procedure for testing track machines

OST 34 38.963-88: Coal mill. Maintainability. General requirements.

OST 34-38-447-78: Maintenance and repair system of electric power plant. Assortment and completeness of standard and technical design repair documents.

OST 34-38-935-87: Steam Stationary Turbines. Reparability. General requirements.

OST 35-09-86: Hoisting machinery and equipment. General specifications.

OST 36-13-90: Shields and consoles of automation systems for technological processes. General technical conditions

OST 36-37-79: Labour safety standard system. Lifting mechanisms with a manual drive. General ergonomic and safety standards.

OST 45.186-2001: Technical assignment for the development of scientific and technical products of telecommunication. Requirements for content and presentation

OST 45.51-96: Automatic container telephone stations. Acceptance Rules

OST 68-2.6-97: Operational documentation on topographic-geodesic devices. Content and general requirements.

OST 68-4-93: Organization and procedure of testing devices of topographic-geodesic purpose.

OTT 08042462: Instruments and automation equipment for nuclear power plants. General technical requirements

PB 09-297-99: Rules of setup and safe operation of compressor units with piston compressors operating on dangerously explosive and noxious gases

PB 10-14-92: Codes for installation and safe operation of lifting cranes

PB 10-157-97: Installation and Safe Operation Requirements for Pipe-Laying Machine Safety

PB 10-256-98: Regulations on design and safe operation of hoists (derricks)

PB 10-257-98: Rules for the installation and safe operation of crane manipulators

PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.

PB 10-77-94: Installation and Safe Operation Requirements for Escalators

PR 32.140-99: Metrological support. Standard samples of industry enterprises. The procedure for the development, certification, approval, registration, control and supervision

PR 50.1.001-93: Standardization Regulations. Regulations on Review and Approval of Technical Specifications

R 50.1.011-96: State supervision of compliance with the mandatory requirements of state standards at the stages of development, preparation for the production and operation of industrial products

R 50-116-90: Recommendations. Hot rolled steel and bent rolled steel profiles. Unified profile mix

R 50-54-15-87: CAD. Test procedures for program-methodologic complexes

R 50-601-11-89: Recommendations. System development and production of products. Organization of the work of the acceptance committee

R 50-601-12-89: Recommendations. System development and production of products. Modernization, modification and improvement of products

R 50-601-13-89: Recommendations. System development and production of products. Application of GOST 15.009-89

R 50-601-4-89: Recommendations. System development and production of products. Production of products for serial repair production

R 50-601-5-89: Recommendations. System development and production of products. Formation of initial requirements for products

R 54-297-90: Technological preparation of production. Key Points

RD 03-36-97: Delivery Services for Imported Equipment, Products, and Components for Nuclear Facilities, Radiation Sources, and Storage Facilities in the Russian Federation

RD 09-167-97: Instructions for Arranging and Carrying out the Inspection in Design and Manufacture of Hazardous Production Facilities in the Chemical, Petrochemical and Oil Refining Industries

RD 10-08-92*: Instructions for the supervision of the manufacture, repair and installation of lifting structures

RD 10-235-98: Supervision Guidelines for the Fabrication, Installation, and Repair of Boiler Facilities

RD 153-34.1-37.312-99: Technical Requirements for Automatic Instruments for On-line Chemical Control for Quality Indicators of the Heat-Transfer Agent of the Water-Steam TPS Path

RD 153-39.1-36-99: Recommendations for the unification of oil pumps for oil refineries

RD 16.407-2000: Explosionproof electrical apparatus. Repair

RD 22-207-88: Lifting machines. General requirements and production standards

RD 26.260.005-91: Procedural Guidelines. Chemical Equipment. Index of Properties and Reliability Assessment Methods

RD 302-07-276-89: Pipe fittings. System for collecting, processing, recording, storing and distributing information about reliability

RD 31.00.87-95: Specifications. Rules of construction, presentation and design. The procedure for approval, approval and registration

RD 31.30.01.06-85: Rules of sea transport construction object drawings and text document execution. Section 6. Hydro technical decisions.

RD 31.30.11.01-84: Guideline on technological design of communication and the alarm system in seaports and at the MMF ship-repair enterprises. Wire communications capabilities.

RD 31.46.05-87: Typical test program for experimental and serial cable-type grabs

RD 32.31-2000: Metrological support. The procedure of metrological control and supervision at enterprises and organizations of the federal railway transport

RD 34.02.310-89: Method for Tests of Atmospheric Steam Discharge Noise Silencers

RD 34.20.115-89: Guidelines for the calculation and design of solar heat supply systems

RD 34.26.103: Procedural Guidelines for Preliminary Approval of the Use of Electric Boilers and Other Heat-Generation Electric Devices

RD 34.41.101: Technical Requirements for Circulation Pumps for Large Electric Power Units

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation

RD 50-101-88: Methodical instructions on the procedure for the development, implementation and monitoring of the implementation of programs for the metrological support of the sectors of the national economy, national economic complexes

RD 50-157-79: Methodological instructions. Electric moisture meter for grain and its products. Calibration techniques.

RD 50-286-81: Guidelines. The system of state testing of products. Ensuring the unity of the test. Main provisions

RD 50-34.698-90: Methodological instructions. Information technology. Set of standards and guidelines for automated systems. Automated systems. Requirements for the content of documents.

RD 50-394-83: Guidelines. Vibration. General requirements for regulatory and technical documents. Valid Parameters

RD 50-559-85: Guidelines. Quantitative methods for optimizing the parameters of standardization objects. Organization of work on the optimization of parameters of standardization objects

RD 50-702-91: Electromagnetic compatibility of technical equipment. The procedure for ensuring electromagnetic compatibility and the rules for the examination

RD 52.14.617-2000: Instructions. The order of the norm control

RD NIIKranostroeniya 02-05: Jib cranes for general purposes and hoisting cranes. Typical Test Programs

RDMU 26-07-261-86: Guidelines. State tests of pipeline fittings. The materials submitted by the basic test units of the head organization - TsKBA for primary certification and the procedure for their execution

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Resolution: Rules for the design and safe operation of steam and hot water boilers

RG 1.3.3.99.0018-2015: Regulation of the interaction of Rosenergoatom Concern OJSC and Engineering Company (NPP General Designer) in the coordination of technical specifications and specifications for NPP equipment

RM 2798: Design Guidelines for Communications, Information Technology, and Power Dispatching Systems for Housing Facilities. Volume 1

RST RSFSR 779-91: System development and production of products. Means of mechanization for enterprises of the textile industry

RTM 108.021.102-85: Steam turbine power units. Foundation requirements

RTM 108.030.21-78: Calculation and design of thermal deaerators

RTM 26-79-72*: Application of standards of a unified system of design documentation (ESKD)

RTM 36.22.13-90: Automation systems. Assembly and technological requirements for design

RTM 36.22.7-89: Automation systems for technological processes. Basic requirements for working documentation

SanPiN 2.6.1.012-94: Production of consumer goods on the factories of the atomic industry

ST RK 1489-2005: Fire fighting equipment. Fire extinguishing aerosol generators. General technical requirements. Test methods

ST RK 1643-2007: Freight cars cast iron brake shoes. Specification

ST RK 1715-2007: Fire engineering. Respiratory and visual organs personal protective equipment. Filter self-rescuers. General technical requirements. Testing methods

ST RK 1846-2008: Freight and passenger cars. Strength testing methods and running characteristics

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

STB 1208-2000: Construction and finishing machines. General safety requirements. Test methods

STB GOST R 51326.1-2003: Automatic circuit breakers, controlled by differential current of household and similar purpose without integral overcurrent protection. Part 1. General requirements and test methods

STB GOST R 51659-2001: Railroad tankers of mainline railways of 1520 mm gauge. General specifications

TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 13-427-78: An inclinometer. Technical conditions

TU 13-428-78: Altimeter. Technical conditions

TU 13-429-78: Goniometer. Technical conditions

TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 4218-002-17416124-96: A series of posts, shields and boxes. Technical conditions

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 68-2.211-91: Plastic globe (diameter 210 mm). Technical conditions

TU 9557-010-02570823-97: Cartographic products. Plastic globe (diameter 320 mm)

TU 9558-005-02570823-96: Cartographic products. Embossed cards

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

VRD 39-1.10-029-2001: Standard programs and methods for conducting preliminary, acceptance and operational tests of electrical units and power plants with a piston and gas turbine drive

VSN 332-93: Design Guidelines for Electrical Installations for Telecommunication, Cable Broadcasting, and Radio and Television Broadcasting Facilities and Structures

VSN 39-1.9-003-98: Designs and Methods of Ballasting and Anchoring of Underground Gas Pipelines

VSN 512-88: Guidelines for the Preparation of Construction Documents for Modular Construction of Medical and Microbiological Facilities. Process Technology

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!