GOST 166-89

ГОСТ 166-89

Vernier callipers. Specifications

Штангенциркули. Технические условия

Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1353 dated 10.10.92 (IUS 1-1993)

The standard applies to calipers designed to measure external and internal dimensions up to 2000 mm, as well as special-purpose calipers for measuring grooves on external and internal surfaces, grooves, distances between axes of holes of small diameters and pipe walls.

Стандарт распространяется на штангенциркули, предназначенные для измерения наружных и внутренних размеров до 2000 мм, а также штангенциркули специального назначения для измерения канавок на наружных и внутренних поверхностях, проточек, расстояний между осями отверстий малых диаметров и стенок труб.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: USSR State Committee for Product Quality and Standards Management, 1/30/1989

SKU: RUSS20454

Price: $72.27




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION II. METROLOGICAL » II Measurements » 1 Measurement of geometric quantities »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P53 Instruments for measuring lengths (outer and inner dimensions) »


As a Replacement Of:

GOST 166-80: Vernier callipers. Specifications

The Document References:

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 166-80: Vernier callipers. Specifications

GOST 2.601-95: Operational documents

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3882-74: Sintered hard alloys. Types

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.113-85: State system for ensuring the uniformity of measurements. Vernier callipers. Verification methods

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection

MI 1384-86: GSE. Caliper with a handout model 124. Calibration method

PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation

The Document is Referenced By:

GOST 10025-2016: Tin-phosphor bronze rods. Specifications

GOST 10025-78: Tin-phosphor bronze rods. Specifications

GOST 10028-81: Glass capillary viscosimeters. Specifications

GOST 10117.1-2001: Glass bottles for food liquids. General specifications

GOST 10134.2-2017: Glass and glass products. Methods for determination of chemical resistance. Determination of acid resistance

GOST 10134.3-2017: Glass and glass products. Methods for determination of chemical resistance. Determination of alkali resistance

GOST 10160-75: Magnetically soft precision alloys

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications

GOST 1018-77: Bands aluminium, copper, brass and cupronikel for capsules. Specifications

GOST 10285-81: Insert blanks for upsetting tools and insert blanks for parting blades made of cemented carbides. Specifications

GOST 10352-80: Refractories for ships' boiler furnaces. Specifications

GOST 10362-2017: Pressure rubber hoses with thread reinforcement without end fittings. Technical conditions

GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications

GOST 10377-2018: Clear glasses for gas masks and protective eyewear. Specifications

GOST 10381-94: High-refractory mullite bricks for blast furnace bottom lining. Specifications

GOST 10403-80: Constructional steel trowels. Technical requirements

GOST 1048-2016: Strips of aluminium bronze for springs. Specifications

GOST 1048-79: Strips of aluminium bronze for springs. Specifications

GOST 10505-76: Locked-coil hoisting steel wire ropes

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion

GOST 10528-90: Geodetic levels

GOST 10529-96: General specifications

GOST 10533-86: Cold-rolled thermostatic bimetal strip

GOST 10633-2018: Wood chipboards and fibreboards. General rules for the preparation and conduct of physical and mechanical tests

GOST 10633-78: Wood particle boards. General requirements in testing physical and mechanical properties

GOST 10636-2018: Wood-shaving and wood-fiber plates. Strength definition method at stretching perpendicularly plate layer

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 10782-85: Glass bottles for blood, transfusion and infusion preparations/compounds

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 10944-97: Manual control and stop valves for building water heating systems. General specifications

GOST 10958-2018: Protective glasses for devices of general industrial application. Specifications

GOST 10958-78: Protective glasses for apparatus of general industrial application. Specifications

GOST 10978-2014: Glass and glass products. Test method for linear thermal expansion coefficient

GOST 11002-80: Wooden cases reinforced with wire. General specifications

GOST 11042-90: Construction steel hammers. Specifications

GOST 11047-90: Wood details and articles for one-two storey dwelling and public buildings

GOST 11067-2013: Glass and glass products. Method for determination of mechanical properties. Determination of impact toughness

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 11214-2003: Windows of wood with glass. Specifications

GOST 11235-2017: Phenol-formaldehyde resins. Methods for the determination of free phenol

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 112-78: Meteorological glass thermometers

GOST 11310-2012: Chrysotiles cement pipes and couplings. Acceptance rules and test methods

GOST 11310-90: Asbestos cement pipes and couplings. Methods of test

GOST 1142-90: Horse-driven load carriages. Specifications

GOST 11474-76: Bent-steel sections. Specifications

GOST 1150-2018: Boiler zinc plates. Specifications

GOST 1150-72: Boiler zinc plates. Specifications

GOST 11529-2016: Polyvinylchloride materials for floors. Control methods

GOST 11529-86: PVC materials for floors. Methods of control

GOST 11530-2014: Rail joint bolts. Specifications

GOST 11532-2014: Nuts for rail joints. Specifications

GOST 11539-83: Bakelite resin plywood

GOST 11573-98: Refractory articles. Method of permeability to gas coefficient determination

GOST 11603-73: Wood. Method for determination of residual stress

GOST 1168-86: Frozen fish

GOST 1172-93: Gauze medical bandages

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 1173-93: Copper strips. Specifications

GOST 11801-74: Foundry moulding and finishing tool. Specifications

GOST 1180-91: Zinc anodes. Specifications

GOST 11842-76: Wood particle boards. Method for determination of resilience

GOST 11856-89: Seed potato. Acceptance rules and methods of analysis

GOST 11897-94: Tripods for geodetic instruments. General technical requirements and methods of tests

GOST 11945-78: Vulcanized fibre tubes. Specifications

GOST 1198-93: Asbestos brake bands

GOST 12.4.023-84: Protective face shields

GOST 12.4.128-83: Safety helmets

GOST 12004-81: Reinforcing-bar steel. Tensile test methods

GOST 1207-70: Sterile medical bandages

GOST 1208-2014: Pressed bronze tubes. Specifications

GOST 1208-90: Pressed bronze tubes

GOST 12120-82: Metal and combined cans

GOST 12138-86: Diphenylolpropane for industrial use. Specifications

GOST 12170-85: Refractories. Stationary method of thermal conductivity determination

GOST 12177-79: Cables, wires and cords. Methods of construction checking

GOST 12271-76: The copolymers of styrene. Specifications

GOST 12301-2006: Cartons of paperboard, paper and composite materials. General specifications

GOST 12301-81: Cartons made from cardboard, paper

GOST 12303-80: Boxes made from cardboard, paper

GOST 12577-67: Refined sugar. Methods for determination of lump sugar solidity and dissolution rate in water

GOST 12730.1-78: Concretes. Methods of determination of density

GOST 12738-77: Glass bulbs with graduated neck. Technical specification

GOST 12766.2-90: Strip from precision high electric resistance alloys

GOST 12766.3-90: Precision gauged alloys of high electric resistance

GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance

GOST 12801-98: Materials on the basis of organic binders for road and airfield construction. Test methods

GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 12963-93: Suction nets. Specifications.

GOST 12998-85: Polystyrene film. Specifications

GOST 13083-2016: Rods of nickel and nickel-silicon alloys. Specifications

GOST 13083-77: Rods of nickel and nickel-silicon alloys. Technical requirements

GOST 13087-81: Concretes. Method of abrasion test

GOST 13236-83: Electrotechnical periclase powders. Specifications

GOST 13330-77: Felt wicks and plates. Specifications

GOST 13340.1-77: Dried vegetables. Methods of determining net weight, shape and size of particles, degree of grinding, apparent defects, component ratio, organoleptic characteristics and cooking capacity

GOST 1335-84: Rubber brake hoses with thread reinforcement for railroad and subway transport without couplings

GOST 13385-78: Dielectric polymeric footwear for special purpose. Specifications

GOST 1341-2018: Vegetable parchment. Specifications

GOST 13448-82: Plastic ventilation grilles. Technical conditions

GOST 13479-82: Cardboard and combined cans

GOST 13481-2001: Staple chemical fibre and chemical tow. Method for determination of linear shrinkage

GOST 13481-76: Man-made fiber and tow. Method of determination of shrinkage

GOST 13634-2017: Fresh corn on the cob. Technical conditions

GOST 13663-86: shaped steel pipes technical requirements

GOST 13781.2-77: Lead joints for 1; 6 and 10 kV power cables. Complete set of details and mounting materials. Specifications

GOST 13840-68: Reinforced steel wire ropes 1x7

GOST 13844-68: Technical metallic gauges. Methods and means of verification

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications

GOST 14032-2017: The galety. General technical conditions

GOST 14037-79: Footwear with textile top, with rubber soles and platforms molded on the top

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14119-85: Rods from precision alloys for elastic elements

GOST 14204-69: Instrument for separation of arsenic in steels, casts irons and alloys. Specifications

GOST 14256-2000: Electro-and heat insulating tapes. Specifications

GOST 14256-78: Asbestos electro-and heat insulating tapes. Specifications

GOST 14311-85: Steel cord

GOST 14316-91: Molybdenum. Spectrum analysis methods

GOST 14339.5-91: Tungsten. Methods of spectral analysis

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 1452-2011: Helical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 1468-90: Cadmium anodes. Specifications

GOST 14906-77: Fluoroplastic-4D. Specifications

GOST 14955-77: Quality round steel with a special surface finish

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1497-84: Metals. Methods of tension test

GOST 1505-2001: Cigarettes. General specification

GOST 15136-78: Refractory articles. Method of damage depth measuring of angles and ribs

GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications

GOST 1525-2015: Rods of monel. Specifications

GOST 15471-2014: Ribbons and strips made of oxygen-free copper for electronics. Specifications

GOST 15471-77: Strips and ribbons of oxygen-free copper for electronics. Specifications

GOST 15588-2014: Polystyrene insulating slabs. Specifications

GOST 15588-86: Polystyrene foam boards. Specifications

GOST 15612-2013: Products from wood and wood materials. Methods for determination of roughness parameters

GOST 15612-85: Products of wood and wooden materials. Methods for determining surface roughness parameters

GOST 15613.2-77: Massive glued wood. Method for determination of glued joint cleavage strength

GOST 15613.3-77: Massive glued wood. Method for determination of ultimate strength in tension of glued butt joint

GOST 15613.4-78: Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending

GOST 15613.5-79: Glued massive wood. Method for determination of ultimate tensile strength of finger glued joints

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 15810-2014: Confectionery. Gingerbread confectionery. General specifications

GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 1595-90: Aluminium-manganese bronze strips and ribbons. Specifications

GOST 15960-79: Friction flexible asbestos materials and products of them. Specifications

GOST 15960-96: Asbestos friction elastic materials

GOST 15981-70: Apparatus for determining dropping temperature of phenolformaldehyde resins. Specifications

GOST 1598-96: Fireclay refractory products for blast furnaces. Specifications

GOST 16016-2014: Clamp bolts for rail track fastenings. Specifications

GOST 16017-2014: Inserted bolts for rail track fastenings. Specifications

GOST 16018-2014: Nuts for clamp and inserted bolts of rail track fastenings. Technical specifications

GOST 16080-2002: Salted far eastern salmons. Specifications

GOST 16218.1-93: Small wares. Method for determination of linear dimensions

GOST 16358-79: Copper strips for coaxial main cables. Specifications

GOST 1639-2009: Non-ferrous metals and alloys scrap and waste. General specifications

GOST 16398-81: Calenderer vinyl plastic film. Specifications

GOST 16427-93: Medical gauze sheets and cuts

GOST 16483.10-73: Wood. Methods for determination of ultimate strength in compression parallel the grain

GOST 16483.11-72: Wood. Method for determination of conventional ultimate strength in compression perpendicular to grain

GOST 16483.12-72: Wood. Method for determination of ultimate strength in shearing perpendicular to grain

GOST 16483.13-72: Wood. Method for determination of ultimate strength in cutting perpendicular to grain

GOST 16483.15-72: Wood. Determination method of water tightness

GOST 16483.1-84: Wood. Method for determination of density

GOST 16483.22-81: Wood. Method of cleavage strength determination

GOST 16483.23-73: Wood. Method for determination of ultimate strength in tension along the grain

GOST 16483.24-73: Wood. Determination method of modulus of elasticity in compression along fibres

GOST 16483.25-73: Wood. Determination method of modulus of elasticity in compression across fibres

GOST 16483.26-73: Wood. Determination method of modulus of elasticity in tension along fibres

GOST 16483.2-70: Wood. Method for determination of conventional ultimate strength in local compression perpendicular to grain

GOST 16483.27-73: Wood. Determination method of modulus of elasticity in tension along fibres

GOST 16483.28-73: Wood. Method for determination of ultimate tensile strength across the grain

GOST 16483.29-73: Wood. Method for determination of factors of cross-sectional deformation

GOST 16483.30-73: Wood. Method for determination of modulus of shear

GOST 16483.31-74: Wood. Resonance method for determination of modulus of elasticity and shear and decrement vibrations

GOST 16483.33-77: Wood. Method for determination of resistivity to nail and woodscrew withdrawal

GOST 16483.34-77: Wood. Method of gas permeability determination

GOST 16483.3-84: Wood. Method of static bending strength determination

GOST 16483.39-81: Wood. Method for determination of wear-proofness index

GOST 16483.4-73: Wood. Methods for determination of impact bending strength

GOST 16483.5-73: Wood. Methods for determination of ultimate shearing strength parallel to grain

GOST 16483.9-73: Wood. Methods for determination of modulus of elasticity in static bending

GOST 1663-2016: Glasses for liquid level indicators. Specifications

GOST 1663-81: Glasses for liquid level indicators. Specifications

GOST 167-2018: Lead tubes. Specifications

GOST 167-69: Lead tubes. Specifications

GOST 17.2.4.06-90: Environment protection. Atmosphere. Methods for determination of velocity and flow rate of gas-and-dust streams from stationary sources of pollution

GOST 17005-82: Wooden laminated structures. Methods to determinate water-stability of adhesive joints

GOST 17057-89: Glass carpet-mosaic facing tiles and carpets from them. Specifications

GOST 17065-94: Wound cardboard drums

GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement

GOST 17151-81: Cooking utensils made

GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications

GOST 17177-94: Thermal insulating materials and products for building application. Test methods.

GOST 1723-2015: Fresh onion for industrial processing. Specifications

GOST 17232-79: Aluminium and aluminium alloys plates. Technical conditions

GOST 17232-99: Aluminium and aluminium alloys plates. Specifications

GOST 17245-79: Soils. Method of laboratory determination of temporary resistance for single-axial compression

GOST 17431-72: Powder material. M-MP alloy Sheets. Specifications

GOST 17432-72: Powder material M-MP alloy Forgings and Rods. Specifications

GOST 17580-82: Wooden laminated structures. Method to determinate stability of glued joints against cyclic temperature- and humidity influences

GOST 17608-2017: The concrete paving slabs. Specifications

GOST 1761-2016: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 1761-92: Tin-phosphorus and tin-zinc bronze ribbons and strips. Specifications

GOST 1789-2013: Beryllium bronze strips and tapes. Specifications

GOST 1789-70: Beryllium bronze strips and ribbons. Specifications

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 1811-97: Traps for sewer systems in buildings. Specifications

GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions

GOST 1820-2001: Matches. Specifications

GOST 1820-85: Matches

GOST 1824-88: Elements and assembly units of upper wooden construction of bridging parks. General specifications

GOST 18268-72: Flexible cellular plastics. Method of test for specific compression set

GOST 18327-2018: Zinc strips for general use. Specifications

GOST 18327-73: Zinc strips for general use. Specifications

GOST 18343-80: Pallets for bricks and hollow clay tiles

GOST 18351-73: Magnesium alloy extruded rods. Specifications

GOST 18423-2012: Canned natural squids and cuttle. Specifications

GOST 18446-73: Glued wood. Evaluation method of heat and frost resistance of adhesive joints

GOST 18481-81: Glass hydrometers and cylinders. General specifications

GOST 18597-73: Motor fuel. Corrosion testing under water condensation conditions

GOST 18599-2001: Polyethylene pressure pipes. Specifications

GOST 18698-79: Rubber delivery hoses with textile framework

GOST 18711-96: Tent wooden members and assembly units. General specifications

GOST 18846-2018: Zinc foil. Specifications

GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 1908-88: Capacitor paper

GOST 19100-73: Glued wood. Method of testing of glued points weatherability

GOST 19111-2001: Polyvinylchloride shaped linear articles for interior finish. Specifications

GOST 19147-82: Skiing sticks. Specifications

GOST 19177-81: Rubber porous sealing gaskets

GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 1936-85: Tea. Acceptance rules and methods of sampling

GOST 19433-88: Dangerous goods. Classification and marking

GOST 19437-81: Cylindrical aluminium ingots. Specifications

GOST 19592-80: Fibre boards. Test methods

GOST 19716-81: Automatic pneumatic rapier looms

GOST 19908-90: Transparent quartz glass crucibles, basins, cups, flasks, funnels, test-tubes and caps. General specifications

GOST 20282-86: General-purpose polystyrene. Specifications

GOST 20558-82: Steel zinc-coated houseware items. General specifications

GOST 2067-93: Bone glue. Specifications

GOST 20681-75: Corrugated board. Method for determining the resistance to flat compression ( Flat crush test)

GOST 20707-2015: Copper and brass ribbons for radiators. Specifications

GOST 20707-80: Copper and brass ribbons for radiators. Specifications

GOST 20850-2014: Wooden glued load bearing structures. General specifications

GOST 21028-75: Jigs for machining holes of moulding boxes and pattern plates. Specifications

GOST 21102-97: Paper and board. Methods for determination of sheet dimensions and non-rectangularity

GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing

GOST 21216.9-93: Clay raw materials. Method for determination of sintering power of clays

GOST 21216-2014: Clay raw materials. Test methods

GOST 21284-93: Clay bentonite for fine and building ceramics. Method for determining the mechanical bending strength

GOST 2132-2015: Nickel anodes. Specifications

GOST 2132-90: Nickel anodes. Specifications

GOST 21400-75: Chemical and laboratory glass. Technical specifications. Test methods

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21519-2003: Windows of aluminium. Specifications

GOST 21523.1-93: Modified wood. Method for determination of strength of bushes

GOST 21523.3.1-93: Modified wood. Method for determination of heat capacity

GOST 21523.3.2-93: Modified wood. Method for determination of heat conductivity

GOST 21523.8-93: Modified wood. Method for determination of modulus of elasticity in compression

GOST 21523.9-87: Modified wood. Method for determination of modulus of elasticity in tension

GOST 21554.4-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in compression parallel to grain

GOST 21561-2017: Automobile tanks for hydrocarbon gas transportation at pressure up to 1,8 MPa. Technical requirements and test methods

GOST 21561-76: Automobile tanks for liquefied hydrocarbon gas transportation at pressure up to 1,8 MPa. General specifications

GOST 2162-97: Adhesive rubberized tape. Specifications

GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications

GOST 2170-73: Strips of nickel and nickel low alloys. Specifications

GOST 21715-2013: Fresh quince. Specifications

GOST 2172-80: Aviation steel ropes

GOST 21797-2014: Two-turn spring washers for railway track. Specifications

GOST 2187-79: Diving weights. Specifications

GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys

GOST 21990-76: Magnesium and magnesium alloys plates. Specifications

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 2205-2016: L-90 tapes and strips for plating. Specifications

GOST 2205-71: L-90 tapes and strips for plating. Specifications

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 2208-91: Brass strips for general use. Specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications

GOST 22343-2014: Clamp of indirect rail fastening of railway. Specifications

GOST 22343-90: Clamp for indirect rail fastening of railways. Specifications

GOST 22366-93: Iron-based sintered filler ribbon electrode

GOST 22379-93: Cotton-gauze medical articles

GOST 22469-77: Swimming rubber flippers

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 22689.0-89: Polyethylene waste-pipes and fittings. General specification

GOST 22689-2014: Polyethylene pipes and fittings for waste discharge inside the buildings. Specifications

GOST 22690-2015: Concretes. Determination of strength by mechanical methods of non-destructive testing

GOST 22706-77: Metals. Method for tension tests at the temperature - 100 up to - 269 °C

GOST 22733-2002: Soils. Laboratory method for determination of maximum density.

GOST 22733-2016: Soils. Laboratory method for determination of maximum density

GOST 22733-77: Soils. A laboratory method for determining maximum density

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 22839-88: Liquorice roots and rhizomes. Specifications

GOST 2284-79: Cold-rolled carbon structural steel strip

GOST 23.219-84: Products wear resistance assurance. Test method for wear resistance of materials and details with hydro erosion wearing by dispersed particles

GOST 23.301-78: Products wear resistance assurance. Instruments for evaluating wear by the method of cut notches. Technical requirements

GOST 23117-91: Semiautomatic grips for tensioning of the steel in prestressed concrete structures. Specifications

GOST 23166-78: Wooden windows

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23289-94: Waste water drain sanitary accessories. Specifications

GOST 23544-84: Ropes of wires for electrical equipment of cars and tractors

GOST 235-78: Rubber tubes for bicycle pumps. Specifications

GOST 23747-2015: Door blocks of aluminium profiles. Specifications

GOST 23747-88: Doors of aluminium alloys. Specifications

GOST 23775-79: Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametric compression)

GOST 23790-79: Phosphates fire protective wood coating. Technical requirements

GOST 23791-79: Phosphates fire protective still coating. Technical requirements

GOST 23855-79: Cylindrical ingots of aluminium alloy AD31. Specifications

GOST 23886-91: Cadmium sheets and plates. Specifications

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 23949-80: Welding non-consumable tungsten electrodes specifications.

GOST 24157-80: Plastic pipes. Method of determination of the resistance to constant internal pressure

GOST 24258-88: Different types of scaffolding. General specifications

GOST 24301-93: Bronze and brass cast bars and tubes. Specifications

GOST 24303-80: Kitchen cookware, made of the ferrous and nonferrous metals

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications

GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold

GOST 24353-2014: Foil of platinum, palladium and their alloys. Specifications.

GOST 24353-80: Sheets of foil made of platinum, palladium and their alloys. Specifications

GOST 24405-80: Silicate enamels (frits). Specifications

GOST 24409-80: Ceramic electrotechnical materials. Methods of testing

GOST 24434-80: Laminated wall and roof panels with plastic foam thermal insulation. Plastic foams. Method of determining shrinkage

GOST 24552-2014: Foil of gold, silver and their alloys. Specifications.

GOST 24581-81: Asbestos-cement sandwich panels with plastic foam thermal insulation. General specifications

GOST 24586-90: Soils. Laboratory methods for determining strength and strain characteristics of frozen soils

GOST 24699-2002: Windows of wood with glass and glassing units. Specifications

GOST 24700-99: Windows of wood with glassing units. Specifications

GOST 24704-2015: Corundum and high alumina refractory products. Specifications

GOST 24718-2014: Bands of platinum, palladium and their alloys. Specifications.

GOST 24718-81: Strips made of platinum, palladium, their alloys. Specifications

GOST 24741-2016: Joint for connection of crane rails to steel crane girders. Specifications

GOST 24741-81: Joint for connection of crane rails to steel crane girders. Specifications

GOST 24748-81: Heat insulation lime-siliceous products. Specification

GOST 24767-81: Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications

GOST 24788-2001: Enameled steel kitchen utensils. General specifications

GOST 24788-2018: Enamelled steel kitchen utensils. General specifications

GOST 24788-81: Enameled steel kitchen utensils.

GOST 24830-81: Concrete refractories. Ultrasonic method of quality control

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 24909-81: Seedling of ornamental deciduous trees. Specifications

GOST 24980-2005: Glass containers. Methods of testing the parameters

GOST 25015-2017: Cellular plastics and foam rubber. Method of measuring linear dimensions

GOST 25015-81: Plastics cellular and foam rubber. Method for measuring linear dimensions

GOST 25097-2002: Windows from wood and aluminium. Specifications

GOST 25283-93: Permeable sintered metal materials. Determination of fluid permeability

GOST 25452-2017: High-pressure rubber hoses with metal windings without end fittings. Technical conditions

GOST 25452-90: Unarmored high-pressure rubber hoses with metal winding

GOST 25499-82: Rocks. Method for determination of coefficient of thermal conductivity

GOST 25552-82: Twisted and plaited goods. Methods of tests

GOST 25577-83: Steel bent closed welded square and rectangular sections. Specifications

GOST 25665-83: Phosphates fire protective steel coating of the mineral fibres. Technical requirements

GOST 25749-2005: Metal winding lids. General specifications

GOST 25769-83: Conifers seedlings for planting in towns. Specifications

GOST 25779-90: Toys. General safety requirements and control methods

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 25818-2017: Fly ash thermal power plants for concrete. Technical conditions

GOST 25884-83: Glue laminated wood structures. Method of determination of the interlayer strength of the glue joints

GOST 25885-83: Glue laminated wood structures. Method of determination of the interlayer strength of the wood materials with wood glue joints

GOST 25898-83: Building materials and products. Methods of steam-tightness determination

GOST 25905-2018: Aluminium foil for condensers. Specifications

GOST 25921-83: Paper tape for graphic devices of computers. Specifications

GOST 2593-2009: Coupling air brake hoses for railway rolling stock. Specifications

GOST 2593-2014: Hose connections for railway rolling stock. Specifications.

GOST 25945-98: Building polymer sealing non-hardening materials and products. Test methods

GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications

GOST 26429-2018: Steel structures of suspended transport tracks. Specifications

GOST 26433.1-89: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. Prefabricated elements

GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications

GOST 265-77: Rubber. Methods of short static compression tests

GOST 26584-85: Motorcycle helmets

GOST 26585-85: Large-sized pneumatic tires for off-road quarry automobiles

GOST 26589-94: Roofing and waterproof mastics. Methods of testing

GOST 26699-98: Underground drilling rigs. General specifications and test methods

GOST 26771-85: Electric micro-motors for toys

GOST 26798.1-96: Oil-well cement. Test methods

GOST 26804-2012: Metal road safety barriers. Specifications

GOST 26816-2016: Cement-bonded wood boards. Specifications

GOST 26816-86: Cement-bonded wood boards. Specifications

GOST 26821-86: Tableware and decorative articles made of soda-lima-silicate glass. General specifications

GOST 26822-86: Tableware and decorative articles made of crystal glass. General specifications

GOST 26869-86: Nursery stock of decorative shrubs. Specification

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 26877-91: Metal products

GOST 26887-86: Platforms and ladders for civil engineering work. Specifications

GOST 26996-86: Polypropylene and copolymers of propylene. Specifications

GOST 26998-86: Polyamide dowels for buildings. Specifications

GOST 27002-86: Cooking utensils from corrosion-resistant steel

GOST 27019-2016: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties

GOST 27019-86: Rolled polymer materials for floors. Method of rapid determination of sound-insulation properties

GOST 27180-2001: Ceramic tiles. Test methods

GOST 27321-2018: Demountable tubular scaffold for constructional works. Specifications

GOST 27321-87: Demountable tubular scaffold for construction works. Specification.

GOST 27572-2017: Apples fresh for industrial processing. Technical conditions

GOST 27573-2013: Fresh pomegranates. Specifications

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 27637-88: Semi-finished products of wrought aluminium thermo-hardened alloys. Control of microstructure for presence of overburning by metallographic method

GOST 27680-88: Particle and fibre boards. Methods of shape and dimensions control

GOST 27812-2005: Glued laminated timber. Test methods for glue lines delaminating strength

GOST 2786-82: Testing glasses for radii and form control of spherical optical surfaces. Specifications

GOST 2800-83: Blanks for wooden details of cart wheels. Specifications

GOST 28015-89: One-layer wooden floor panels. Technical requirements

GOST 28055-89: Tree and shrub planting stock. Garden and architectural forms. Specifications

GOST 28058-2015: Gold in ingots. Specifications

GOST 28084-89: Low-freezing cooling liquids. General specifications.

GOST 28181-89: Vine shoots. Specifications

GOST 28182-89: Grape seedlings. Specifications

GOST 28244-96: Reinforced wires and cords. Specifications

GOST 28250-89: High-impact polystyrene. Specifications

GOST 28306-2018: Agricultural machinery. Potato planters. Test methods

GOST 28391-89: Faience goods

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28450-2014: Bridge wooden beams. Specifications

GOST 28456-90: Expansive dowels for building. General specifications

GOST 28469-90: Wooden laminated sleepers and cants for tram lines. Specifications

GOST 2848-75: Tapers of tools. Tolerances. Methods and means of control

GOST 28498-90: Liquid-in-glass thermometers

GOST 28541-95: Stone-cutting machines

GOST 285-69: Monobasic corrugated barbed wire

GOST 28595-2015: Silver in ingots. Specifications

GOST 28637-90: Bristle brush articles. Check methods

GOST 28679-90: Steam-water heaters for heat supply systems

GOST 286-82: Clay sewer pipes

GOST 28713-2018: Potato harvesting machines. Test methods

GOST 28724-90: Speed gas meters

GOST 28741-90: Potato food products. Acceptance, sample preparation and test methods

GOST 28777-2016: Furniture. Children's beds. Test methods

GOST 28829-90: Seedlings of decorative trees and bushes in containers. Specification

GOST 28965-91: Zipper. Methods of checking

GOST 28966.1-91: Polymer adhesives. Method of determining cleavage strength

GOST 28966.2-91: Polymer adhesives. Method of determining peel strength

GOST 29150-91: Accessories for products of light industry. Methods of checking

GOST 29169-91: Laboratory glassware. One-mark pipettes

GOST 29187-91: Quick-frozen fruits and berries

GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements

GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements

GOST 30088-93: Seed onion and selected onion. Seeding characteristics. General specifications

GOST 30106-94: Seed garlic. Varietal and seeding characteristics. Specifications

GOST 30150-96: Labeling machines

GOST 30198-94: Sport (racing) skis. Specifications

GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30245-94: Roll-formed steel welded closed square or rectangular sections designed for use in steel structures

GOST 30248-2013: Electrical carbon products. Electrical heating appliances made of carbon fibre materials. General specifications

GOST 30248-97: Electric heaters using carbon fiber materials

GOST 302-79: Medical maximum glass thermometer. Specifications

GOST 30304-95: Fabrics coated with rubber or plastics. Determination of tear resistance

GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications

GOST 30353-95: Floors. Impact resistance test method

GOST 30407-96: Glass tableware and decorative articles

GOST 30416-2012: Soils. Laboratory testing. General requirements

GOST 30416-96: Soils. Laboratory testing. General requirements

GOST 30534-97: Means of measurement for linear and angular dimensions. Safety requirements and test methods

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 3056-90: Casein glue powder. Specifications

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 30629-99: Cladding materials and products made of natural stone. Test methods

GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30673-99: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30674-99: Windows of polyvinylchloride profiles. Specifications

GOST 30684-2000: Asbestos and non-asbestos gasket materials. Method of testing of tensile strength

GOST 30698-2014: Tempered glass. Specifications.

GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications

GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.

GOST 30740-2000: Sealing materials used in joints of aerodrome coats. General specifications

GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand

GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces

GOST 30765-2001: Metal transport packagings. General specifications

GOST 30766-2001: Tins for chemical products. General specifications

GOST 30771-2001: Refractory products containing carbon. Methods of testing

GOST 30778-2001: Rubber compression-types for windows and doors. Specifications

GOST 30779-2001: Insulating glass units for building. Method of determination of resistance to atmospheric effects and estimation of life circle

GOST 30826-2001: Laminated glass for building. Specifications

GOST 30872-2002: Air cooling machines. General specifications

GOST 30970-2002: Doors of polyvinylchloride profiles. Specifications

GOST 30970-2014: Door blocks of polyvinylchloride profiles. Specifications

GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications

GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications

GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications

GOST 30973-2002: Polyvinylchloride profiles for windows and doors. Method of determination of resistance to climatic effects and estimation of life circle

GOST 31014-2002: Glass filled poliamides profils. Specifications

GOST 31173-2003: Steel doors. Specifications

GOST 31173-2016: Steel doors. Specifications

GOST 31174-2003: Gates of metall. General specifications

GOST 31174-2017: Gates of metall. General specifications

GOST 31290-2018: Refined platinum. Specifications

GOST 31291-2018: Refined palladium. Specifications

GOST 31294-2005: Direct-acting safety valves. General specifications

GOST 31356-2007: Dry building cement binder mixes. Test methods

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST 31364-2007: Soft coating low emissivity glass. Specifications

GOST 31374-2009: Connection brake pipe with electrocontact 369A. Specifications

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications

GOST 31402-2013: Brake cylinders for railway rolling stock. General specifications

GOST 31412-2010: Seaweeds, sea grasses and products of their processing. Methods of identification of sensory and physical characteristics

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31462-2011: Safety windows. General specifications

GOST 31466-2012: Products of processed poultry meat. Methods of determination of mass fractions of calcium and dimensions and mass fraction of bond particles

GOST 31471-2011: Panic and emergency exit devices. Specifications

GOST 314-72: Felt, felt parts, felt piece goods. Acceptance rules and test methods

GOST 31516-2012: Medical maximum glass thermometrs. General specifications

GOST 31559-2012: Anchor supports. General pecifications

GOST 31560-2012: Metal frame yield supports. Arch support. General specifications

GOST 31568-2012: Dental gypsum products. General specifications

GOST 31571-2012: Dental ceramic. Technical requirements. Test methods

GOST 31573-2012: Dental impression elastomeric materials. Technical requirements. Test methods

GOST 31575-2012: Dental ceramic fused to metal restorative materials. Technical requirements. Test methods

GOST 31589-2012: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST 31613-2012: Static electricity spark safety. General technical requirements and test methods

GOST 31619-2012: Implantable mammary prostheses. General technical requirements. Test methods

GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31674-2012: Feeds, compound feeds, material for compound feeds. Methods for the determination of common toxicity

GOST 31783-2012: Grape seedlings. Specifications

GOST 31821-2012: Fresh aubergines for retail. Specifications

GOST 31822-2012: Fresh courgettes for retail. Specifications

GOST 31823-2012: Kiwifruit for retail. Specifications

GOST 31825-2012: Sucker rods, mouth stocks and couplings for them. Specifications

GOST 31853-2012: Fresh artichokes for retail. Specification

GOST 31854-2012: Fresh leek for retail. Specifications

GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications

GOST 31938-2012: Fiber-reinforced polymer bar for concrete reinforcement. General specifications

GOST 32018-2012: Road-construction goods of natural stone. Specifications

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32068-2013: Subscribers telephone equipment. Safety requirements and test methods

GOST 32088-2013: Textile materials. Floor carpet coverings. Flammability. Method of determination and classification

GOST 32093-2013: Stone ware. General specifications

GOST 32094-2013: Majolica ware. General specifications

GOST 32096-2013: Packaging paperboard for food products. General specifications

GOST 32130-2013: Glass jars for food products of fishing industry. Specifications

GOST 32131-2013: Glass containers for alcohol and non-alcohol food products. General specifications

GOST 32156-2013: Canned of the pacific Salmon fishes natural and natural with oil addition. Spacifications

GOST 32207-2013: Wheel for railway stock. Methods of residual stress determination

GOST 32260-2013: Semihard cheeses. Specifications

GOST 32263-2013: Soft cheeses. Specifications

GOST 32283-2013: Fresh cherry-plum. Specifications

GOST 32284-2013: Fresh food garden carrots for retail. Specifications

GOST 32285-2013: Fresh food red beet for retail. Specifications

GOST 32286-2013: Plums for retail. Specifications

GOST 32288-2013: Inshell hazelnuts. Specifications

GOST 32304-2013: Laminate flooring based on dry process wood fibreboards. Specifications

GOST 32309-2013: Casting utensils of aluminium alloys. General specification

GOST 32311-2012: Ceramic paving brick. Specifications

GOST 32342-2013: Salmons the pacific with spawning changes frozen. Specifications

GOST 32398-2013: Fireproof Wood Chipboards. Technical Specifications

GOST 32399-2013: Waterproof Wood Chipboards. Technical Specifications

GOST 32409-2013: Spring anchors to railway rails. Technical specification

GOST 32412-2013: Unplasticized polyvinylchloride pipes and fittings for waste discharge inside the buildings. Specifications

GOST 32413-2013: Unplasticized polyvinylchloride pipes and fittings for sewerage and drainage systems outside the buildings. Specifications

GOST 32414-2013: Polypropylene pipes and fittings for waste discharge inside the buildings. Specifications

GOST 3241-91: Steel ropes

GOST 32486-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of durability characteristics

GOST 32486-2015: Fibre-Reinforced Polymer Bar for Concrete Reinforcement. Methods for determination of structural and thermo-mechanical characteristics

GOST 32487-2013: Polymer composite frame for reinforcement of concrete structures. Methods for determination of characteristics of resistance to the corrosive media

GOST 32487-2015: Fibre-reinforced polymer bar for concrete constructions. Methods for determination of characteristics of resistance to the corrosive media

GOST 32492-2013: Polymer composite frame for reinforcement concrete structures. Method for determination of physical and mechanical properties

GOST 32492-2015: Fibre-reinforced polymer bar for concrete reinforcement. Determination of physical-mechanical properties

GOST 32493-2013: Materials and products the construction heatinsulating. Method of determination of air permeability and resistance to a air permeability

GOST 32494-2013: Buildings and constructions. The method of mathematic simulation for temperature and humidity of protecting constructions

GOST 32548-2013: Ventilation for buildings. Air terminal devices. General specifications

GOST 32557-2013: Glass and glass products. Inspection methods for geometric parameters and appearance

GOST 32565-2013: Safety glass for ground vehicles. General specifications

GOST 32566-2013: Glass and glass products. Test method of bullet resistance

GOST 32568-2013: Glass units for vehicles grazing. Specifications

GOST 32582-2013: Plain aluminum foil web for packing of food products for household purposes. Specifications

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications

GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications

GOST 32591-2013: Fittings of copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 32624-2014: Crown-corks. General specifications

GOST 32625-2014: Metallic caps. General specifications

GOST 32626-2014: Polymeric means of closing. General specifications

GOST 32674-2014: Glass containers. Sizes. Control methods

GOST 32680-2014: Head current collection elements of pantographs of electric vehicle. General specification

GOST 32683-2014: Edges material based paper impregnated with carbamide-formaldehyde resin. Specifications

GOST 32686-2014: Bottles from polyethylene terephthalate for food liquids. General specifications

GOST 32694-2014: Plates for spike fastening of railway. Specifications

GOST 32700-2014: Railway rolling stock. Test methods of coupling

GOST 32707-2014: Automobile roads of general use. Mineral powder. Method for determination of swelling samples from a mixture of powder with bitumen

GOST 32717-2014: Automobile roads of general use. Crushed sand. Determination of lamellar grains (flakiness) and needle shape

GOST 32736-2014: Consumers’ package from combined materials. General specifications

GOST 32758-2014: Public roads. Temporary technical means of traffic management. Specifications and rules for use

GOST 32760-2014: General use highways. Traffic bollards. Test methods

GOST 32787-2014: Fresh apricots. Specifications

GOST 32791-2014: Young fresh turnip dining. Specifications

GOST 32803-2014: Self-stressing concrete. General specifications

GOST 32810-2014: Fresh radish. Specifications

GOST 32842-2014: Automobile roads of general use. Bituminous mastics. Test methods

GOST 32844-2014: Automobile roads of general use. Guide signal posts. Methods of testing

GOST 32845-2014: Automobile roads of general use. Bituminous sealants. Test methods

GOST 32849-2014: Automobile roads of general use. Road marking wares. Methods of testing

GOST 32864-2014: Automobile roads of general use. Slag rubble. Determination of grains of lamellar (flakiness) and needle shaped forms content

GOST 32874-2014: Inshell walnuts. Specifications

GOST 32875-2014: Fresh food stahis. Specifications

GOST 32877-2014: Garlic young fresh with greens. Specifications

GOST 32878-2014: Fresh parsnip root. Specifications

GOST 32879-2014: Fresh daikon-root. Specifications

GOST 32882-2014: Fresh corn in ears for industrial processing. Specifications

GOST 32883-2014: Culture of fresh green vegetables for industrial processing. Specifications

GOST 32931-2015: Profile steel pipes for metal constructions. Specifications

GOST 32941-2014: Matches. Method of testing matches sensibility for ignition

GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 32956-2014: Public roads. Trays for road drainage. Methods of control

GOST 32962-2014: Automobile roads of general use. Kerb units. Control methods

GOST 32964-2014: Public roads. Artificial bumps, modular. Technical specifications. Methods of control

GOST 32972-2014: Plastic manholes for sewerage and drainage systems. Specifications

GOST 33007-2014: Scrubber and duster equipment. Methods for determination of dust load of gas streams. General technical requirements and control methods

GOST 3302-83: Rubber ice-bags

GOST 3302-95: Rubber ice-bags. Specification

GOST 3303-82: Rubber hot-water bottles

GOST 3303-94: Rabber hot-water bottles. Specifications

GOST 33053-2014: Public roads. Rubble and gravel from rocks. Determination of the content of lamellar (flakiness) and needle shape

GOST 33081-2014: Wooden glued bearing structures. Strength classes of structures elements and methods for its determination

GOST 33082-2014: Timber structures. Methods of determining the bearing capacity of the joints

GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications

GOST 33120-2014: Glued timber structures. Methods for determining strength of glue joints

GOST 33121-2014: Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects

GOST 33123-2014: Pipe culverts made of polymer composites. Specifications

GOST 33124-2014: Laminated veneer lumber. Specifications

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 33145-2014: Public roads. Road mirrors. Methods of control

GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods

GOST 33183-2014: Meggy type rubber-metal springs. Specifications

GOST 33184-2014: Joint bars for rails of gauge railway. Specifications

GOST 33185-2014: Bars for insulating joints rails. Safety requirements and testing methods

GOST 33186-2014: Clamp of spring rod for mounting rails. Specifications

GOST 33187-2014: Disk springs for rail joints. Specifications

GOST 33188-2014: Clutches of traction drive of multiple wagon rolling stock. Rubber-cord casing. General specifications

GOST 33214-2015: Polymeric and combined means of closing for perfumery cosmetic production. General specifications

GOST 33221-2015: Bottles from polyethylene terephthalate for chemical products. General specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 33282-2015: Frozen fish fillet for children nutrition. Specifications

GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications

GOST 33344-2015: Constructive pultruded profiles from polymer composites. General specifications

GOST 33345-2015: Polymer composites. Production of plates for preparation of test specimens. General technical requirements

GOST 33375-2015: Polymer composites. Test method for open-hole tension testing of specimens

GOST 33376-2015: Polymer composite deck sections for pedestrian and highway bridges and overbridges. General specifications

GOST 33377-2015: Polymer composites. Test method for filled-hole tension testing of specimens

GOST 33389-2015: Public roads. Deicing materials. Test methods

GOST 3339-74: Woven wire screen "(No Suggestions)"

GOST 33431-2015: High-voltage boxes of passenger cars for locomotive traction and multiple units. General specifications

GOST 33463.7-2015: Life support systems on railway rolling stock. Part 7. Test methods for determination of ergonomic parameters

GOST 33492-2015: Fresh ceps. Specifications

GOST 33495-2015: Polymer composites. Test method for compression after impact

GOST 33496-2015: Polymer composites. Method for testing the resistance to damage during a falling weight impact

GOST 33498-2015: Polymer composites. Test method for collapse

GOST 33499-2015: Fresh pears. Specifications

GOST 33519-2015: Polymer composites. Test method for compression at normal, low and high temperatures

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33540-2015: Fresh food carrot for industrial processing. Specifications

GOST 33562-2015: Fresh garlic. Specifications

GOST 33590-2015: Souvenir matches. General specifications

GOST 33597-2015: Braking systems of railway rolling stock. Inspection procedures

GOST 33685-2015: Polymer composites. Test method for determination of the interlaminar fracture toughness under shear GIIC

GOST 33687-2015: Machines and tools for surface treatment of soil. Methods of tests

GOST 33694-2015: Plastics. Determination of linear dimensions of test specimens

GOST 33721-2016: Head sets of electric drives, external contactors for switches. Safety requirements and methods of checking

GOST 33722-2016: Switches of turnouts. General specifications

GOST 33735-2016: Agricultural machinery. Grain-cleaning machines. Test methods

GOST 33737-2016: Agricultural machinery. Beet-gathering machines. Test methods

GOST 33749-2016: Hydraulic clampers for railway rolling stock. General specifications

GOST 33756-2016: Plastic consumer packaging. General specifications

GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts

GOST 33794-2016: Cigars and cigarillos. Determination of thickness

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 33801-2016: Fresh cherries. Specifications

GOST 33810-2016: Metal barrels for food liquids. Specifications

GOST 33837-2016: Polymeric packaging for food products. General specifications

GOST 33843-2016: Polymer composites. Method for determining the shear modulus in the plane by the torsion method

GOST 33851-2016: Fresh Brussels sprouts. Specifications

GOST 33854-2016: Fresh broccoli. Specification

GOST 33882-2016: Fresh mangoes. Specifications

GOST 33885-2016: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators

GOST 33916-2016: Fresh kohlrabi cabbage. Specification

GOST 33932-2016: Fresh cucumbers for retail. Specifications

GOST 33949-2016: Products from foam glass heat-insulating for buildings and structures. Specification

GOST 33953-2016: Fresh strawberry. Specifications

GOST 33959-2016: Salted cheeses. Specifications

GOST 34032-2016: Board and combined cans. General specifications

GOST 34062-2017: Railway traction substations, transformer substations and power supply linear devices. Safety requirements and control methods

GOST 34069-2017: Gas supply system. Main pipeline gas transportation. Mobile compressor unit. Control and testing

GOST 34078-2017: Rail fasteners pads of railway. Specifications

GOST 34099-2017: Izdeliya sanitarno-gigienicheskie iz metalla dlya detej i podrostkov. Tehnicheskie usloviya

GOST 34101-2017: Posuda stal'naya emalirovannaya dlya detej i podrostkov. Tehnicheskie usloviya

GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions

GOST 34130-2017: Dried fruits and vegetables. Test methods

GOST 34186-2017: Canned crab. Technical conditions

GOST 34212-2017: Parsley fresh. Technical conditions

GOST 34216-2017: Fresh garden radish. Specifications

GOST 34217-2017: Feijoa fresh. Technical conditions

GOST 34264-2017: Polymeric transport containers. General specifications

GOST 34265-2017: Agricultural machinery. Forage harvesting machines. Test methods

GOST 34266-2017: Pineapples are fresh. Technical conditions

GOST 34267-2017: Shallot fresh. Technical conditions

GOST 34269-2017: Hot peppers fresh pepper. Technical conditions

GOST 34270-2017: Avocado fruits are fresh. Technical conditions

GOST 34277-2017: Materials and systems for the protection and repair of concrete structures. Requirements for anchoring compositions and adhesion-strength fastenings of reinforcement elements

GOST 34278-2017: Mechanical reinforcement couplers for reinforced concrete structures. Specifications

GOST 34295-2017: Shaped charge. Specifications

GOST 34296-2017: High-explosive torpedoes. Specifications

GOST 34297-2017: Cumulative pipe cutters. Specifications

GOST 34298-2017: Fresh tomatoes. Specifications

GOST 34299-2017: Fresh vegetable beans. Technical conditions

GOST 34300-2017: Horse-radish. Specifications.

GOST 34306-2017: Fresh onion. Technical conditions

GOST 34307-2017: Citrus fruits. Technical conditions

GOST 34314-2017: Fresh apples for retail. Specifications

GOST 34318-2017: Asparagus is fresh. Technical conditions

GOST 34320-2017: Fresh celery. Technical conditions

GOST 34322-2017: Fig fresh. Technical conditions

GOST 34323-2017: Chinese cabbage and Beijing cabbage fresh. Specifications

GOST 34324-2017: Squash fresh. Technical conditions

GOST 34325-2017: Sweet peppers fresh. Specifications

GOST 34340-2017: Fresh peaches and nectarines. Technical conditions

GOST 34349-2017: Glued timber structures. Methods for determining of glue joints long-term strength

GOST 34368.2-2017: Plastics Method for the determination of creep in three-point bending

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34390-2018: Agricultural machinery. Machines for harvesting the tops of root crops. Test methods

GOST 34391-2018: Agricultural machinery. Technical grape harvesting machines. Test methods

GOST 34392-2018: Agricultural machinery. Planting machines. Test methods

GOST 34403-2018: Fresh annonas. Specifications

GOST 34405-2018: Metal prefabricated cans. General specifications

GOST 34419-2018: Sealing metal means for packaging with food liquids under overpressure. General specifications

GOST 34432-2018: Сhilled and frozen «crab» sticks. Specifications

GOST 3559-75: Steel band for armoring cables

GOST 3560-73: Sealing tepe

GOST 3578-88: Plantlets of essential oil geranium. Specifications

GOST 3579-98: Seedlings of lavender. Specifications

GOST 379-2015: Silicate bricks, stones, blocks and partition blocks. General specifications

GOST 379-95: Silicate brick and stones. Specifications

GOST 38-72: Rubber packing rings for joining heads of brake hoses and end cocks of autobrakes. Specifications

GOST 390-96: Fireclay and semiacidic refractory articles general-purpose and mass production. Specifications

GOST 3916.2-89: Plywood with outer layers of coniferous veneer for general use. Specifications

GOST 3934-2018: Aircraft wood. Inspection rules and control methods

GOST 3934-71: Aircraft wood

GOST 3935-2000: Cigarettes. General specifications

GOST 400-80: Glass thermometers for testing of petroleum products. Specifications

GOST 4025-95: Domestic meat mincers. Specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4070-2000: Refractory products. Method for determination of refractoriness-under-load

GOST 4070-2014: Refractory products. Method for determination of refractoriness-under-load

GOST 4071.1-94: Refractory products with a true porosity of less than 45%. Determination of cold compressive strength

GOST 4248-2018: Chrysotile cement non-arcing boards for electrical purposes (ACEID). Specifications

GOST 434-78: Wire with rectangular cross-section and copper busbar wire for electrotechnical purposes

GOST 4442-2014: Bands and strips of lead brass. Specifications

GOST 4442-72: Strips and bands of lead brass. Specifications

GOST 4515-93: Copper phosphorous alloys. Specifications

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4598-2018: Fibre boards by wet way of production. Specifications

GOST 473.11-81: Chemically resistant and heat resistant ceramic ware. The method for determination of resilience

GOST 473.6-81: Chemically resistant and heat resistant ceramic wares. The method for determination of compression strength

GOST 473.7-81: Chemically resistant and heat resistant ceramic wapes. The method for determination of tensile strength

GOST 473.8-81: Chemically resistant and heat resistant ceramic ware. The method for determination of static bending strength

GOST 4748-92: Silicon-manganese bronze strips and ribbons. Specifications

GOST 474-90: Acid-proof brick. Specifications

GOST 4750-79: Pneumatic tyres for bicycles. Specifications

GOST 475-2016: Door Blocks wooden and combined. General specifications

GOST 475-78: Wooden doors. General specifications

GOST 4781-85: Hot-rolled steel shapes for sheet piles. Specifications

GOST 480-78: Asbestos cellulose filtering and sterilizing plates. Specifications

GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5040-78: Light-weight heat-insulating refractory and high-refractory products. Specifications

GOST 5040-96: Lightweight heatinsulating refractory and high-refractory products. Specifications

GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications

GOST 5063-73: Ribbons of cupro-nickel alloys. Specifications

GOST 5152-84: Gland Packing Specifications

GOST 5170-73: Repair kits for pneumatic tyres. Specifications

GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics

GOST 5180-84: Soils. Laboratory methods for determination

GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications

GOST 5187-70: Nickel silver, german silver and monel tapes. Specifications

GOST 5189-2018: Constantan strips. Specifications

GOST 5189-75: Constantan strips. Specifications

GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes

GOST 5244-79: Wood chips

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 5341-98: Alumino-silicate refractories for linings of steel-teeming ladles. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5362-2018: Brass ribbons. Specifications

GOST 5362-78: Brass ribbons. Specifications

GOST 5375-79: Rubber moulded boots. Specifications

GOST 5398-76: Textile reinforced pressure-suction rubber hoses without fittings. Specifications

GOST 5402.1-2000: Refractory products with a true porosity of less than 45 %. Method for determination of permanent change in dimensions on heating

GOST 5402.2-2000: Insulating refractory products. Method for determination of permanent change in dimensions on heating

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5477-2015: Vegetable oils. Methods for determination of colour

GOST 5496-78: Rubber technical tubes. Specifications

GOST 5500-2001: Stopper refractories for steel pouring from ladle. Specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5541-2002: Cork means of closing. General specifications

GOST 5635-2018: Glass diffusers for ground vehicle lighting and light signalling apparatus. Specifications

GOST 5635-80: Glass dissipators for autotractor, motor-cycle and bicycle lighting and light signalling apparatus. Specifications

GOST 5638-2018: Copper roil foil for technical purposes. Specifications

GOST 5638-75: Copper roll foil for technical purposes. Specifications

GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding

GOST 5717.1-2014: Glass containers for cannеd food products. General specifications

GOST 5-78: Constructive textile and asbestos laminates. Specification

GOST 5802-86: Mortars. Test methods.

GOST 5812-2014: Fastening for railways. General technical specifications

GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods

GOST 5813-93: Fan v-belts and pulleys for engines of cars, tractors and combines

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5981-2011: Cans and metallic preserve caps. Technical specifications.

GOST 5981-88: Tins for preserved food

GOST 5984-99: Explosives. Methods for determination of brisance

GOST 6133-99: Concrete wall stone. Specifications

GOST 6266-97: Gypsum plasterboards

GOST 6286-2017: High pressure rubber hoses with metal braids without end fittings. Technical conditions

GOST 6286-73: High-pressure rubber hoses with metal braids without fittings

GOST 6365-74: Rubber protectors for drill pipes. Specifications

GOST 6428-2018: Gypsum tongue-and-groove blocks for partitions. Specifications

GOST 6428-83: Plaster slabs for partitions. Specifications

GOST 6467-79: Vulcanized rubber cords of round and square cross-sections. Specifications

GOST 6482-88: Reinforced concrete non-pressure pipes

GOST 6511-2014: Wrought tin-zinc bronze rods. Specifications

GOST 6511-60: Wrought stannic-zinc bronze rods. Specifications

GOST 6564-84: Lumbers and blanks

GOST 6810-86: Wallpaper

GOST 6851-2003: Lead-acid storage starter and non-starter batteries for motor-cycles. General specifications

GOST 6851-91: Lead-acid storage non-starter batteries for motor cycles and motor-scooters. General specifications

GOST 6859-72: Apparatus for liquids sampling and measuring. Specifications

GOST 6942.0-80: Cast iron waste pipes and fittings. General specifications

GOST 6942-98: Cast iron waste pipes and fittings Specifications

GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance

GOST 7153-85: General-purpose telephones

GOST 7178-2015: Melon fresh. Technical conditions

GOST 7183-93: Foam mixers. Specifications.

GOST 7199-77: Rubber-metallic ship bearings. Specifications

GOST 7231-90: Canned tomatoes

GOST 7329-91: Chemical laboratory and electrovacuum glassware. Polarizable and optical method of path-length difference measuring

GOST 7370-2015: Railway frogs. Specifications

GOST 7392-2014: Crushed stone of solid rocks for ballast layer of rail ways. Specifications.

GOST 7403-2015: Canned of crab natural. Specifications

GOST 745-2003: Aluminium foil for packing. Specifications

GOST 745-2014: Aluminium foil for packing. Specifications

GOST 7452-2014: Canned fish natural. Specifications

GOST 7481-78: Armoured sheet glass. Technical requirements

GOST 7498-93: Hydro elevators for firefighting. Specifications.

GOST 7511-73: Steel sections for window and lantern transoms and window panels of industrial buildings. Specifications

GOST 7524-2015: Steel grinding balls for ball mills. Specifications.

GOST 7524-89: Steel grinding balls for the ball mills

GOST 7631-2008: Fish, non-fish objects and products from them. Methods of sensory and physical characteristics identification

GOST 767-91: Copper anodes. Specifications

GOST 7875.0-2018: Refractory products. Basic requirements for methods of thermal shock resistance determination

GOST 7975-2013: Fresh food pumpkin. Specification

GOST 8.136-74: State system for ensuring the uniformity of measurements. Hydraulic presses for testing building materials. Verification methods and means

GOST 8.234-77: State system for ensuring the uniformity of measurements. Volumetric glass ware. Methods and means of verification

GOST 8.250-77: State system for ensuring the uniformity of measurements. Thermometers glass medical maximum. Verification methods and means

GOST 8.281-2013: State system for ensuring the uniformity of measurements. Mechanical motion quantities measuring means for traction rolling stock. Verification procedure

GOST 8.346-2000: State system for ensuring the uniformity of measurements. Steel horizontal cylindrical tanks. Calibration methods

GOST 8.400-2013: State system for ensuring the uniformity of measurements. Standard metallic gauges. Verification procedure

GOST 8.426-81: State system for ensuring the uniformity of measurements. Sphere rebound hardness testing machines. Methods and means of verification

GOST 8.509-84: State system for ensuring the uniformity of measurements. Long-term strength and creep testing machines. Calibration methods

GOST 8.570-2000: State system for ensuring the uniformity of measurements. Steel vertical cylindrical tanks. Calibration methods

GOST 8.633-2013: State system for ensuring the uniformity of measurements. Technical metallic gauging tanks. Method of verification

GOST 8036-2013: Strips of brass Л90. Specifications

GOST 8036-79: Tombac strips. Specifications

GOST 8037-93: Hose branches. Specifications.

GOST 809-2014: Track wood screws. General technical specifications

GOST 8136-85: Active aluminum oxide

GOST 8220-85: Underground fire hydrants. Specifications

GOST 8242-88: Profiled details from wood and wood materials for building. Specifications

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8269-87: Crushed aggregate of natural rock, crushed-gravel aggregate and gravel for construction work. Testing methods

GOST 8411-74: Ceramic drain pipes. Specifications

GOST 8430-85: Pneumatic tyres for earthmoving, loading, and mining machines. Specifications

GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements

GOST 862.2-85: Floor parquet products. Mosaic parquet. Specifications

GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements

GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8699-2013: Cigars and cigarillos. General specifications

GOST 8699-76: Cigars

GOST 8747-88: Asbestos-cement sheet products. Test methods

GOST 8778-81: Blanks for spectacle lenses. Technical conditions

GOST 8816-2014: Switch wooden beams. Specifications

GOST 8829-85: Prefabricated reinforced concrete structures and elements. Methods of testing and estimation of strength, rigidity and resistance to cracking

GOST 8829-94: Reinforced concrete and prefabricated concrete building products. Loading test methods. Assesment of strength, rigidity and crack resistance

GOST 8894-2018: Glass pipes. Specifications

GOST 8894-86: Glass pipes and shaped parts thereto Technical requirements

GOST 8904-2014: Hard wood-fibre boards varnish and paint coatings. Specifications

GOST 8904-81: Hard wood-fibre boards with varnish and paint coatings. Specifications

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.410-88: Unified system of corrosion and ageing protection. Powder polymeric coatings. Typical technological processes

GOST 9.715-86: Unified system of corrosion and ageing protection. Polymeric materials. Test methods for temperature shock resistance

GOST 9.904-82: Unified system of corrosion and ageing protection. Aluminium alloys. Accelerated test method for exfoliating corrosion

GOST 9074-85: Joined by pins slot cloths

GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

GOST 9155-88: Rubber and rubber-and-textile athletic footwear

GOST 9186-76: Cardboard for footwear and details made of the same. Rules of acceptance and test methods

GOST 9218-2015: Automotive vehicles for transportation of food liquids. Requirements and test methods

GOST 9218-86: Tanks for food liquids mounted on vehicles

GOST 9272-2017: Hollow glass blocks. Specifications

GOST 931-90: Brass sheets and strips. Specifications

GOST 9338-80: Plywood drums. Specifications

GOST 9356-75: Rubber hoses for gas welding and metal cutting. Specifications

GOST 938.12-70: Leather. Method of preparing of samples for physical-mechanical testing

GOST 938.13-70: Leather. Method of measuring of weight and linear sizes of samples

GOST 9416-83: Building levels. Technical requirements

GOST 9424-79: Hardened glasses for scuttles. Specifications

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 9479-84: Natural stone blocks for facing products. Technical requirements

GOST 9498-79: Flat ingots of aluminium and wrought aluminium alloys for rolling. Specifications

GOST 9506.7-74: Brushes for electrical machines. The method for determination of the commutator's characteristics

GOST 9590-76: Laminated paper decorative plastic. Specifications

GOST 959-2002: Lead-acid storage starter batteries for motor-tractors. General specifications

GOST 959-91: 12 v starter lead storage batteries for vehicles, tractors and motorcycles

GOST 961-89: Acid-resistant and thermostable acid-resistant ceramic tiles. Specifications

GOST 9620-94: Laminated glued wood. Sampling and general requirements in testing

GOST 9621-72: Laminated glued wood. Methods for determination of physical properties

GOST 9622-2016: Laminated wood. Methods for determining the tensile strength and modulus of tensile elasticity

GOST 9622-87: Laminated glued wood. Methods for determination of ultimate strength and modulus of elasticity in tension

GOST 9623-87: Laminated glued wood. Method for determination of ultimate strength and modulus of elasticity in compression

GOST 9624-2009: Laminated glued wood. Method for determination of shear strength

GOST 9624-93: Laminated glued wood method for determination of shear strength

GOST 9625-2013: Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending

GOST 9625-87: Laminated glued wood. Method for determination of strength and elasticity module in static bending

GOST 968-68: Sawn timbers (bars and boards) for aircraft

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 9758-86: Non-organic porous aggregates for construction work

GOST 9900-2013: Glass and glass products. Methods for determination of mechanical properties. Determination of elasticity modulus at cross static bending

GOST 9923-80: Manual fire barrel. Specifications

GOST 9967-74: Technical dimethylamine. Specifications

GOST ISO 1893-2014: Refractory products. Determination of refractoriness under load. Differential method with rising temperature

GOST ISO 1924-1-96: Paper and board. Determination of tensile properties. Part 1. Constant rate of loading method

GOST R 12.4.184-95: Occupational safety standards system. Safety belts. General technical requirements and test methods

GOST R 12.4.287-2013: Occupational safety standards system. Clothes for special protection against chemical. Method for determination of water vapour permeability membrane materials and seams

GOST R 22.3.14-2018: Safety in emergency situations. Collective protective equipment. Air cleaning devices filtering. General technical requirements. Test methods

GOST R 22.3.15-2018: Safety in emergency situations. Collective protective equipment. Air regeneration devices. General technical requirements. Test methods

GOST R 50028-92: Rubber or plastics hoses and tubing. Bending test

GOST R 50054-92: Bridge timbers laminated beams. Specifications

GOST R 50197-92: Bone glue. Specifications

GOST R 50398-92: Fire hydraulic elevator. Specifications

GOST R 50399-92: Air-foam nozzles. Specifications

GOST R 50400-92: Hose branching. Specifications

GOST R 50401-92: Suction gauzes. Specifications

GOST R 50408-92: Foam mixers. Specifications

GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications

GOST R 50508-93: Observation telescopes. Test methods of characteristics

GOST R 50577-2018: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50703-2002: Heading machines having cutter heads mounted on booms. General technical requirements and test methods

GOST R 50742-95: Cartridges for gas pistols, revolvers, shoot devices and gas tubeless arms. Safety requirements. Types and methods of control during safety certification tests

GOST R 50820-95: Scrubber and duster equipment. Methods of determination of dust load of gas-and-dust streams

GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications

GOST R 50908-96: Small tractors, powered blocks and motor cultivators. Method for estimation of safety

GOST R 50910-96: Metal frame yield supports. Test methods

GOST R 50962-96: Plastics vessels and articles for economic purposes. General specifications

GOST R 50982-2003: Fire equipment. Specialized fire department tools. General technical requirements. Test methods

GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods

GOST R 51015-97: Blades for household and special use. General specifications

GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications

GOST R 51042-97: Face belt conveyors. Test methods

GOST R 51047-97: Cutters for shearers and entry-driving machines. General specifications

GOST R 51049-2008: Fire equipment. Pressure fire hoses. General technical requirements. Test methods

GOST R 51049-97: Fire engineering. Fire pressure hoses. General technical requirements. Test methods

GOST R 51078-97: Walking frames. Technical requirements and test methods

GOST R 51080-97: Rollotors. Technical requirements and test methods

GOST R 51083-2015: Wheelchairs for disabled persons. General specifications

GOST R 51083-97: Wheelchairs for disabled persons. General specifications

GOST R 51085-97: Elbow crutches. Requirements and test methods

GOST R 51115-97: Fire equipment. Fire turntable combined monitors. General technical requirements. Test methods

GOST R 51132-98: Large sized fat fall keta slightly salt cured ('Semuzhnaya'). Specifications

GOST R 51136-2008: Protective laminate glass. General specifications

GOST R 51136-98: Protective laminate glass. General specifications

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51191-2007: Units of lower-limb prostheses. Technical requirements and test methods

GOST R 51194-98: Brushes of electrical machines. Methods of dimensions examination

GOST R 51222-98: Equipment for bank protection. Venetian blinds. General specifications

GOST R 51223-98: Equipment for bank protection. Sluices for transfer of values. General specifications

GOST R 51224-98: Equipment for bank protection. Doors and manholes. General specifications

GOST R 51245-99: Steel universal drill rods. General specifications

GOST R 51267-99: Matches. Method of testing matches sensibility for ignition

GOST R 51271-99: Pyrotechnic goods. Methods of tests

GOST R 51287-99: Station telephone subscribers. Requirements for safety and test methods

GOST R 51364-99: Air cooling apparatus. General specifications

GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 51500-99: Hunting knives and daggers. General specifications

GOST R 51501-99: Tourist and special sport knives. General specifications

GOST R 51507-99: Post cards. Technical requirements. Control methods

GOST R 51548-2000: Survival knives. General specifications

GOST R 51555-99: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 51572-2000: Gold weighted bullions. Specifications

GOST R 51603-2000: Fresh bananas. Specifications

GOST R 51611-2000: Special purpose rounds for self-defence tubeless fire-arms (complex 'OSA'). General technical requirements. Safety requirements and test methods

GOST R 51613-2000: Pressure pipes made of unplasticized polyvinylchloride. Specifications

GOST R 51644-2000: Dressing and skinning knives. General specifications

GOST R 51667-2000: Brushes for electrical machines. Methods for determination of the commutator characteristics

GOST R 51669-2000: Pit hydraulic props. Test methods

GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications

GOST R 51685-2013: Railway rails. General specifications.

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 51715-2001: Decorative and souvenir products similar in external structure to cold or throw or missile weapon. General technical requirements

GOST R 51735-2001: Dental ceramic. Technical requirements. Test methods

GOST R 51736-2001: Dental ceramic fused to metal restorative materials. Technical requirements. Test methods

GOST R 51737-2001: Automatic water and foam fire fighting systems. Sectional tubing couplings. General technical requirements. Methods of tests

GOST R 51748-2001: Metal frame yield supports. Arch support. General specifications

GOST R 51756-2001: Aluminium cans of deep drawing with easy open end. Specifications

GOST R 51760-2001: Polymeric consumers packagings. General specifications

GOST R 51760-2011: Polymeric consumer's containers. General specifications

GOST R 51781-2001: Glass containers for perfumery and cosmetic products. General specifications

GOST R 51782-2001: Fresh food garden carrots for retail. Specifications

GOST R 51783-2001: Fresh onions for retail. Specifications

GOST R 51808-2001: Fresh food potatoes for retail. Specifications

GOST R 51808-2013: Food potatoes for retail. Specifications

GOST R 51809-2001: Fresh white-headed cabbage for retail. Specifications

GOST R 51810-2001: Fresh tomatoes for retail. Specifications

GOST R 51811-2001: Fresh food red beet for retail. Specifications

GOST R 51829-2001: Gypsum fibre sheets. Specifications

GOST R 51844-2001: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51844-2009: Fire equipment. Fire-fighting cabinets. General technical requirements. Test methods

GOST R 51887-2002: Dental gypsum products. General specifications

GOST R 51895-2002: Cold blade weapon for bearing with the kazak uniform and national costumes of the peoples of the Russian Federation. General technical requirements. Test methods

GOST R 51905-2002: Sports crossbows, crossbows for relaxation and bolts. Technical requirements and safety test methods

GOST R 51918-2002: The equipment for care of coordinates through the vertical mine. General technical requirements and test methods

GOST R 51932-2002: Ophthalmic optics. Spectacle frames for corrective eyeglasses. General technical requirements and test methods

GOST R 51958-2002: Polymeric means of closing. General specifications

GOST R 51968-2002: Domestic vacuum flasks with glass fills. General specifications

GOST R 51969-2002: Kitchen utensils from special domestic glass. General specifications

GOST R 51970-2002: Ski-poles for walk and sport race skiing. Specifications

GOST R 51977-2002: Plastic accumulator cases. Specifications

GOST R 51979-2002: Aircraft lead batteries. General specifications

GOST R 52007-2003: Carbon manufactured articles. Acoustic methods of control. Testing of acoustic waves velocity

GOST R 52018-2003: Shaft sinking hoppets. Specifications

GOST R 52042-2003: Anchor supports. General specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52114-2003: Units mechanics of upper-limb prostheses. Technical requirements and test methods

GOST R 52114-2009: Units mechanics of upper-limb prostheses. Technical requirements and test methods

GOST R 52115-2003: Casting arms. Sport bows, bows for recreation and arrows for them. General technical requirements. Safety test methods

GOST R 52123-2003: Port-holes for diving hyperbaric chambers with operating pressure up to 4,9 MPa (50 kgf/sq cm). General specifications

GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications

GOST R 52172-2003: Glass units for vehicles glazing. Specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52217-2004: Sinking rope attachments. Specifications

GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications

GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications

GOST R 52272-2004: Textile materials. Floor carpet coverings. Flammability. Method of determination and classification

GOST R 52274-2004: Static electricity spark safety. General technical requirements and test methods

GOST R 52337-2005: Feeds, compound feeds, material for compounds feeds. Methods for the determination of common toxicity

GOST R 52392-2005: Brake cylinders for railway rolling stock. General specifications

GOST R 52437-2005: Equipment for bank protection. Deposit and personal safes. General specifications

GOST R 52484-2005: Souvenir matches. General specifications

GOST R 52502-2005: Venetian blinds-rollets. General specifications

GOST R 52502-2012: Venetian metals blinds-rollets. Specifications

GOST R 52541-2006: Refractory castables. Preparation of test pieces

GOST R 52542-2006: Refractories. Methods for determination of thermal resistance with cooling by compressed air

GOST R 52569-2006: Frits. Specifications

GOST R 52569-2018: Frits. Specifications

GOST R 52578-2006: Dental impression elastomeric materials. Technical requirements. Test methods

GOST R 52579-2006: Consumers package from combined materials. General specifications

GOST R 52602-2006: Anticorrosive polymeric-asmol coating-tape "LIAM". Specifications

GOST R 52617-2006: Glass containers for milk and milk products. Specifications

GOST R 52620-2006: Transport polymeric containers. General specifications

GOST R 52707-2007: Refractories for steel pouring. Refractory products for slide gates of casting ladles. Specifications

GOST R 52747-2007: Vehicles. Antiskid studs. General specifications

GOST R 52749-2007: Assembly window joints with vapour-permeable and self-expanding tapes. Specifications

GOST R 52750-2007: Panic and emergency exit devices. Specifications

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52752-2007: Formworks. Test methods

GOST R 52758-2007: Agricultural purpose loaders and conveyors. Test methods

GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications

GOST R 52789-2007: Bottles from polyethylene terephthalate for food liquids. General specifications

GOST R 52878-2007: Tutors on upper and lower-limbs. Technical requirements and test methods

GOST R 52897-2007: Glass jars food products of fishing industry. Specifications

GOST R 52898-2007: Glass bottles for food acetic acid and food vinegars. Specifications

GOST R 52901-2007: Corrugated board for products packaging. General specifications

GOST R 52909-2008: Targets for stand shooting and sporting. General specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 52921-2008: Medical maximum glass thermometers. General specifications

GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 52948-2008: Fittings from copper and copper alloys with compression ends for use with copper tubes. Specifications

GOST R 53000-2008: Implantable mammary prostheses. General technical requirements. Test methods

GOST R 53025-2008: Grape seedlings. Specifications

GOST R 53051-2008: Machinery and tools for digging out and selection of seedlings and saplings in nursery forests. Test methods

GOST R 53052-2008: Machinery and tools for preparation of fillings for making foresting. Test methods

GOST R 53065.1-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 1. Test without packings

GOST R 53065.2-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 2. Test with packings

GOST R 53071-2008: Fresh aubergines for retail. Specifications

GOST R 53084-2008: Fresh courgettes for retail. Specifications

GOST R 53086-2008: Fresh artichoke for retail. Specifications

GOST R 53088-2008: Fresh leek for retail. Specifications

GOST R 53135-2008: Planting material of fruit, subtropical, nut-bearing, citrus cultures and tea. Specifications

GOST R 53171-2008: Automobile roads of general use. Road marking wares. Preformed road markings. Methods of checking

GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications

GOST R 53223-2008: Chrysotile cement slabs for wall facing. Specifications

GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications

GOST R 53253-2009: Fire-fighting equipment. Suction gauzes. General technical requirements. Methods of testing

GOST R 53254-2009: The firefighting equipment. Stationary external fire ladders. Buildings roof railings. General technical requirements. Test methods

GOST R 53266-2009: Fire equipment. Fire saving cord. General technical requirements. Test methods

GOST R 53267-2009: Fire equipment. Fire snap hook. General technical requirements. Test methods

GOST R 53269-2009: Fire equipment. Helmets for fire-fighters. General technical requirements. Test methods

GOST R 53270-2009: Fire equipment. Fire lantern. General technical requirements. Test methods

GOST R 53273-2009: Fire equipment. Fire jumping down rescue devices. General technical requirements. Test methods

GOST R 53275-2009: Fire equipment. Fire department hand-operated ladders. General technical requirements. Test methods

GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods

GOST R 53277-2009: Fire equipment. Equipment for maintenance of fire hoses. General technical requirements. Methods of testing

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53286-2009: Fire engineering. Automatic dry chemical fire fighting system. Module. General technical requirements. Test methods

GOST R 53287-2009: Water and foam fire fighting systems. Fire alarm hydraulic, fire foam inducer, feeder. General technical requirements. Test methods

GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods

GOST R 53331-2009: Fire-fighting equipment. Hand nozzles. General technical requirements. Methods of testing

GOST R 53338-2009: Vapour-permeable self-expanding and self-adhesive tapes for building application. Specifications

GOST R 53346-2009: Units of lower-limb orthoses. Technical requirements and test methods

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53416-2009: Glass containers for medicines. General specifications

GOST R 53499-2009: Tombac strips. Specifications

GOST R 53542-2009: Aviation engines and their components. Brazing of high-alloy steels in vacuum. General requirements for technological process

GOST R 53544-2009: Brown ware. Specifications

GOST R 53545-2009: Stone ware. Specifications

GOST R 53548-2009: Majolica ware. General specifications

GOST R 53589-2009: Kiwifruit for retail. Specification

GOST R 53596-2009: Fresh citrus fruits. Specifications

GOST R 53599-2009: Products of processed poultry meat. Methods of determination of mass fractions of calcium and dimensions and mass fraction of bond particles

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53648-2009: Underground diesel locomotives. General technical requirements and test methods

GOST R 53671-2009: Pipeline valves. Swing and lift check valves. General specifications

GOST R 53673-2009: Pipeline valves. Butterfly wicket valves. General specifications

GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods

GOST R 53767-2010: Polymeric and combined means of closing for perfumery cosmetic production. General specifications

GOST R 53772-2010: Reinforced steel low-relaxation 7-wire strands. Specifications

GOST R 53784-2010: Optical elements for light signal devices of a railway transport. Specifications

GOST R 53821-2010: Vehicles. Diaphragms and plate membranes. Technical requirements and test methods

GOST R 53884-2010: Strawberries for retail. Specifications

GOST R 53885-2010: Plums for retail. Specification

GOST R 53906-2010: Toys. General safety requirements and methods of tests. Mechanical and physical properties

GOST R 53921-2010: Glass containers for alcohol and non – alcohol food products. General specifications

GOST R 53960-2010: Metal frame yield supports. Trapezoid supports. General specifications

GOST R 53961-2010: Fire-fighting equipment. Underground fire hydrants. General technical requirements. Test methods

GOST R 54046-2010: In shell hazelnuts. Specification

GOST R 54086-2010: Pressure regulators. General specifications

GOST R 54093-2010: Wheel for railway stock. Methods of residual stress determination

GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications

GOST R 54154-2010: Sanitary ware made from metal for children and teenagers. Specifications

GOST R 54155-2010: Enamelled steel kitchen utensils for children and teenagers. Specifications

GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications

GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications

GOST R 54160-2010: Ribbons from cuprum-nickel, nickel silver and monel. Specifications

GOST R 54175-2010: Sealed insulating glass units. Specifications

GOST R 54253-2010: Carbon materials. Test method for linear thermal expansion coefficient

GOST R 54254-2010: Carbon materials. Test method for thermal conductivity at room temperature

GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications

GOST R 54307-2011: General-use automobile roads. Road marking wares. Polymer tapes. Test methods

GOST R 54311-2011: Insulating refractory products. Accelerated method for determination of permanent change in dimensions on heating

GOST R 54333-2011: Particle and fibre boards. Method for determination of tensile strength perpendicular to the plane of the panel

GOST R 54391-2011: Utensils and covers from silver for children. Specifications

GOST R 54394-2011: Bone china ware. Specifications

GOST R 54395-2011: Faience ware. Specifications

GOST R 54396-2011: Vitreous china ware. Specifications

GOST R 54397-2011: Ceramic cooking ware for thermal processing off foodstuff. Specifications

GOST R 54470-2011: Glass containers for canned food products. General specifications

GOST R 54475-2011: Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications

GOST R 54560-2015: Fibre reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54574-2011: Steel drums for paint materials. Specifications

GOST R 54575-2011: Porcelain ware. Specifications

GOST R 54577-2011: Modified wood. Specifications

GOST R 54592-2011: Foot-wear. Methods for determination of linear dimensions

GOST R 54688-2011: Fresh pineapples. Specifications

GOST R 54689-2011: Fresh avocados. Specifications

GOST R 54690-2011: Fresh annonas. Specifications

GOST R 54694-2011: Fresh mangoes. Specifications

GOST R 54695-2011: Fresh beans. Specification

GOST R 54697-2011: Fresh apples for retail. Specification

GOST R 54699-2011: Fresh asparagus. Specifications

GOST R 54701-2011: Fresh squash marrows. Specifications

GOST R 54702-2011: Fresh peaches and nectarines. Specifications

GOST R 54739-2011: Orthopaedic footwear products. General specifications

GOST R 54747-2011: Ferro-concrete cross ties for railways for 1520 mm gauge railways. General specifications

GOST R 54748-2011: Crushed stone from rocks for railway ballast. Specifications

GOST R 54752-2011: Fresh cucumbers for retail. Specifications

GOST R 54771-2011: Mine electric locomotive transport. Trolley electric locomotives. General technical requirements and test methods

GOST R 54772-2011: Supple mining main vents and shaped components for them. General technical requirements and test methods

GOST R 54773-2011: Anchor supports. Test methods for anchor

GOST R 54774-2011: Underground monorail diesel powered transport. General technical requirements and test methods

GOST R 54778-2011: Machines for harvesting fruit and berries. Test methods

GOST R 54779-2011: Corn harvesting combines. Test methods

GOST R 54780-2011: Machines for goods processing fruit. Test methods

GOST R 54782-2011: Forage harvesting machine. Test methods

GOST R 54797-2011: Boxes high-voltage passenger cars for locomotive traction and multiple units. The general technical requirements

GOST R 54809-2011: Traffic control devices. Road marking. Test methods

GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54901-2012: Dried beet pulp. Specifications

GOST R 54912-2012: Modified wood for bear of slide. Specifications

GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 54936-2012: Implants for surgery. End expanders. General technical requirements. Test methods

GOST R 55019-2012: Pipeline valves. Multiplayer metal bellows. General specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55046-2012: Technical diagnostics. Evaluation of residual resource of long used steel pipelines on the basis of samples mechanical tests results. General requirements

GOST R 55063-2012: Kinds of cheese and processed cheese. The rules of tests acceptance, sampling and control methods

GOST R 55068-2012: Glass-fibre and basalt-fibre reinforced epoxy plastic pipes and parts of pipelines. Specifications

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55142-2012: Testing of welded joints of thermoplastic sheets and pipes. Test methods-Requirements

GOST R 55151-2012: Mining equipment. Cable laying machines. General technical requirements and test methods

GOST R 55152-2012: Mining equipment. Mobile armoured face conveyors. General technical requirements and test methods

GOST R 55156-2012: Mining equipment. Mine belt stage loader. General technical requirements and test methods

GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods

GOST R 55163-2012: Mining equipment. Underground self-propelled cars. Safety requirements and test methods

GOST R 55164-2012: Mining equipment. Movable mine compressor stations. Safety requirements and test methods

GOST R 55184-2012: Hydraulic clampers for railway rolling stock. General specifications

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55225-2012: Meshes of glass fibre for building-faces, reinforcing, alkali-resistant. Specifications

GOST R 55225-2017: Reinforcing, alkali-resistant meshes of glass fibre for building-faces. Specifications

GOST R 55261-2012: Testing agricultural tractors and machines. Potato planters. Methods of testing

GOST R 55412-2013: Faсade’s thermo insulation composite systems with external mortar’s lays. Test methods

GOST R 55412-2018: Facade’s thermo-insulation composite systems with external plaster layers. Test methods

GOST R 55430-2013: Detachable pipe joints. Evaluation of technical condition and methods of testing. Operation safety

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55504-2013: Metal tins for preserve. Specifications

GOST R 55505-2013: Frozen food fish forcemeat. Specifications

GOST R 55511-2013: Pipeline valves. Electric actuators. General specifications

GOST R 55622-2013: Complex security systems. Hydraulic gun carriage trunks with Remote control. General technical requirements

GOST R 55623-2013: Armour clothes. Methods of testing

GOST R 55643-2013: Fresh cherries. Specifications

GOST R 55644-2013: Fresh celery. Specifications

GOST R 55647-2018: Copper and copper alloy trolley wires for electric railways. Specifications

GOST R 55657-2013: Modified wood. Methods of plugs strength, hardness and toughness determination

GOST R 55658-2013: Panels wall with the wooden framework. Specifications

GOST R 55726-2013: Fresh Squash feijoa. Specifications

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

GOST R 55728-2013: Mining equipment. Underground hydromonitors. Safety requirements and test methods

GOST R 55731-2013: Mining equipment. Metal frame yield supports. Ring supports. General specifications

GOST R 55732-2013: Mining equipment. Support of mine working. Polymer net for the guard mine working. Specifications

GOST R 55735-2013: Mining equipment. High pressure mine rubber hoses with metallic tapings and metallic braidings with fitting. Safety requirements and test methods

GOST R 55737-2013: Mining equipment. Mine electric locomotive transport. Accumulator electric locomotives. General technical requirements and test methods

GOST R 55757-2013: Heliantus tuberosus (tubers). Planting material. Varietal and planting characteristics. General specifications

GOST R 55758-2013: Planting material of Humulus lupulus L. General specifications

GOST R 55777-2013: Shape charges. Technical conditions

GOST R 55778-2013: Jet guns. Technical conditions

GOST R 55781-2013: Means of delivering cement. Technical conditions

GOST R 55783-2013: High-explosive torpedoes. Technical conditions

GOST R 55784-2013: Cutters cumulative. Technical conditions

GOST R 55785-2013: Detonating cords. Method for determining detonation velocities

GOST R 55820-2013: Switch and crossing rails. Specifications

GOST R 55870-2013: Figs fresh. Specifications

GOST R 55883-2013: Disconnections for railways traction network and operating mechanisms for them. General specifications

GOST R 55885-2013: Sweet peppers fresh. Specifications

GOST R 55886-2013: Horse-radish. Specifications

GOST R 55903-2013: Shallots fresh. Specifications

GOST R 55904-2013: Fresh parsley. Specifications

GOST R 55905-2013: Fennel. Specifications

GOST R 55906-2013: Fresh tomatoes. Specifications

GOST R 55907-2013: Fresh garden radish. Specifications

GOST R 55908-2013: Floors. Method of the covering slipperiness evaluation

GOST R 55909-2013: Fresh garlic. Specifications

GOST R 55910-2013: Fresh corn in ears. Specifications

GOST R 55944-2014: Bearings of the modified wood. Tolerances and landing

GOST R 55946-2014: Saving means of crews of engineering installations operated in water areas, personal. General specifications

GOST R 55948-2014: Preserves of scallop fillet in sauce. Specifications

GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure

GOST R 56070-2014: Wood waste. Technical conditions

GOST R 56177-2014: Controlled door closing devices (door closers). Specifications

GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications

GOST R 56209-2014: Rods composite polymer for the manufacture of cores uninsulated wires. Specifications

GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications

GOST R 56288-2014: The easily dumped window constructions with double-glazed windows for buildings. General specifications

GOST R 56291-2014: Rail fasteners pads of railway. Specifications

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56339-2015: Automobile roads of general use. Geosynthetic for road construction. Determination of the Tensile Creep and Creep Rupture Behaviour

GOST R 56356-2015: Metal shelving for archives. Specification

GOST R 56367-2015: Safes and steel cabinets for storage of civilian weapons and ammunition. General specifications

GOST R 56369-2015: Filing cabinets. Specifications

GOST R 56378-2015: Materials and systems for the protection and repair of concrete structures. Requirements for products repair and bond connections for rehabilitation of structures

GOST R 56379-2015: Floors. Test method of bearing ability

GOST R 56383-2015: Artificial dried grass fodder. Specifications

GOST R 56387-2015: Dry-mix cement based adhesives for tiles. Specifications

GOST R 56387-2018: Dry construction glue mixtures on cement binder. Technical conditions

GOST R 56388-2015: Matches for hunting. Specifications

GOST R 56393-2015: Passenger cars on locomotive traction. Test methods of sanitary-hygienic and ecological indicators

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 56417-2015: Frozen fillet of gadoid species «Extra». Specifications

GOST R 56459-2015: Fire extinguishing devices with thermosetting micro capsulation outgassing extinguishing composition. General technical requirements. Test methods

GOST R 56499-2015: Oriented acrylic sheets focused for aviation glazing. Test methods

GOST R 56504-2015: Building materials. Methods for moisture conductivity coefficients determining

GOST R 56505-2015: Building materials. Methods for determining the performance of the capillary absorption of water

GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications

GOST R 56565-2015: Fresh zucchini for industrial processing. Specifications

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications

GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications

GOST R 56628-2015: Collective saving means of crews of engineering installations operated in water areas. General specifications

GOST R 56629-2015: Electric Connectors for diving works. General specifications

GOST R 56632-2015: Products bakery of low humidity. Solomka. General specifications

GOST R 56636-2015: Fresh cultivated mushrooms oyster. Specifications

GOST R 56654-2015: Polymer composites. Method for determination of density of sandwich core materials

GOST R 56672-2015: Fresh cherry for industrial processing. Specifications

GOST R 56674-2018: Casting cookware of aluminum alloys with non-stick coating. General specifications

GOST R 56680-2015: Polymer composites. Determination facing’s mechanical flexural properties of sandwich construction by long beam flexure method

GOST R 56682-2015: Polymer and metal composites. Method for determination the volume of matrix, reinforce filler and voids

GOST R 56687-2015: Protection of concrete and reinforced-concrete construction from corrosion. Test method of sulphate resistance of concrete

GOST R 56688-2015: Ceramic tiles. Specifications

GOST R 56706-2015: Glued cross laminated timber boards. Specifications

GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications

GOST R 56711-2015: Pin type connection for wooden structures. Specifications

GOST R 56712-2015: Panel multilayer polycarbonate. Specifications

GOST R 56732-2015: Materials and products the construction heat insulating. Methods for determining the emission characteristics of fibres with air flow around

GOST R 56739-2015: Polymer composites. Method for determination of water migration in sandwich construction cores

GOST R 56751-2015: Fresh cucumbers for industrial processing. Specification

GOST R 56768-2015: Sweet peppers fresh for industrial processing. Specifications

GOST R 56772-2015: Polymer composites. Method for determination static energy absorption properties of honeycomb sandwich core materials

GOST R 56785-2015: Polymer composites. Test method for tensile of flat specimens

GOST R 56786-2015: Polymer composites. Method for determination of shear strength in the plane of the reinforcement

GOST R 56788-2015: Polymer composites. Test method open-hole compressive strength of polymer matrix composite laminates

GOST R 56791-2015: Polymer composites. Determination of mechanical characteristics of shear of the inner layer of sandwich constructions by beam flexure

GOST R 56792-2015: Polymer composites. Test method on stratifying with winding on drum

GOST R 56797-2015: Polymer composites. Axial compressive test method for mechanical characteristics of hoop wound polymer matrix composite cylindrical specimens

GOST R 56799-2015: Polymer composites. Method of definition of mechanical characteristics at shear on samples with V-notched cut

GOST R 56800-2015: Polymer composites. Determination of tensile properties of unreinforced and reinforced materials

GOST R 56808-2015: Polymer composites. Method for determination interlaminar fracture toughness of unidirectional-reinforced composites

GOST R 56810-2015: Polymer composites. Test method for flexural flat samples

GOST R 56812-2015: Polymer composites. Method for determination of mechanical characteristics in combined loading compression

GOST R 56815-2015: Polymer composites. Method for determination specific work of exfoliation in tearing off conditions GIC

GOST R 56820-2015: Fresh pears for industrial processing. Specifications

GOST R 56821-2015: Fresh Squash for industrial processing. Specifications

GOST R 56822-2015: Fresh aubergines for industrial processing. Specifications

GOST R 56827-2015: Cultivated fresh mushrooms. Specifications

GOST R 56879-2016: Modified wood. Blanks for sleepers and poles of power lines. Specifications

GOST R 56904-2016: Steel cord conveyor belts for mining industry. General specifications

GOST R 56961-2016: Saving means of crews of engineering installations operated in water areas. Facilities to evacuations. General specifications

GOST R 57009-2016: Polymer composites. Test method for fracture strength in cleavage of adhesives in bonded joints

GOST R 57032-2016: Conveyor belts with textile plies for coal mining. Specifications

GOST R 57041-2016: Polymer composites. Method of determination of the characteristics of flexural curved beams

GOST R 57045-2016: Polymer composites. Test method for determination of tensile properties perpendicular to reinforcement plane

GOST R 57047-2016: Polymer composites. Method for determination of the characteristics of fatigue resistance of laminates

GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications

GOST R 57066-2016: Polymer composites. Test method for lap shear adhesion for bonded joints

GOST R 57112-2016: Gummed tape on paper substrate industrial-technical appointment. General specifications

GOST R 57142-2016: Polymer composites. Method for determination of shrinkage stresses in the oriented organic glasses

GOST R 57143-2016: Polymer composites. Standard test method for tension-tension fatigue

GOST R 57151-2016: Polymer composites. Method of constructing the curve of equilibrium deformation of samples of organic glasses

GOST R 57152-2016: Polymer composites. Method for determination of highly elastic and relaxation characteristics of organic glasses

GOST R 57177-2016: The induction-metallurgical method of surfacing. Technological process

GOST R 57178-2016: Electric-contact method of surface hardening of details. Typical technological process

GOST R 57179-2016: Thermite welding of rails. The method of testing and quality control

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57181-2016: Thermite welding of rails. Technological process

GOST R 57206-2016: Polymer composites. Test method of determination of the mode II fracture toughness for the calibrated end-loaded split (C-ELS)

GOST R 57213-2016: Electromagnetic compatibility of technical equipment. Radar absorbing composite polymer self-adhesive coating. General specifications

GOST R 57223-2016: Technical diagnostics. Evaluation of steel pipelines condition under the parameters of the deformation relief in operation. General requirements

GOST R 57327-2016: Metal fire doors. General technical requirements and test methods

GOST R 57378-2016: Earthing rod for railway overhead contact system. Specifications

GOST R 57384-2017: Secure storage device. Fire resistance safes and cabinets. Classification and methods of fire resistance tests

GOST R 57407-2017: Carbon fibers. General technical requirements and test methods

GOST R 57418-2017: Mineral wool heat-insulatingmaterials and products. Method of determining the effective operation period

GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications

GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications

GOST R 57471-2017: Explosion-proof metal works. General technical requirements and test methods

GOST R 57613-2017: Graphite electrodes and nipples. Specifications

GOST R 57638-2017: Polymer composites. Determination of the fracture resistance of adhesive joints under cleavage conditions by means of double cantilever beam and tapered double cantilever beam

GOST R 57641-2017: Xerographic paper for office equipment. General specifications

GOST R 57658-2017: Trunk pipeline transport of oil and oil products. Activated carbon for the recovery of volatile vapor oil and oil products. Specifications

GOST R 57739-2017: Polymer composites. Determination of glass transition temperature by dynamic mechanical analysis method

GOST R 57750-2017: Polymer composites. Test method for creep properties of adhesives in shear

GOST R 57751-2017: Polymer composites. Test method of determination of adhesives in cleavage peel by tension loading

GOST R 57753-2017: Polymer composites. Test method for determination of apparent interlaminar shear strength of pultruded glass composite rods

GOST R 57764-2017: Support canes and crutches axillary. Technical requirements and methods of control

GOST R 57766-2017: Chairs with medical equipment. Types, technical requirements and methods of control

GOST R 57778-2017: Polymer composites. Determination of in-plane shear properties by the rail shear method

GOST R 57790-2017: Timber bearing structures. Methods of strength and deformability testing

GOST R 57832-2017: Polymer composites. Determination of peel resistance of high-strength adhesive bonds by Floating-roller method

GOST R 57834-2017: Polymer composites. Standard test method for shear strength of single-lap-joint adhesively bonded

GOST R 57857-2017: Ceramic composites. Determination of axial tensile strength and stress-strain response performed on cylindrical specimens at normal temperature under monotonic loading

GOST R 57866-2017: Polymer composites. Determination of flexural properties

GOST R 57883-2017: Glassfiber reinforced thermosetting pipes and parts of pipelines. Method for determination of the amounts of constituents

GOST R 57885-2017: Glassfiber reinforced thermosetting pipes and parts of pipelines. Determination of dimensions

GOST R 57892-2017: Spinal assistants and headholders. Тechnical requirements and test methods

GOST R 57924-2017: Polymer composites. Methods for determination of flammability of the materials for used in aviation technics

GOST R 57927-2017: Ceramic composites. Determination of oxidation resistanceof non-oxidemonolithic ceramics

GOST R 57928-2017: Polymer composites. Method of determining the rate of heat release during combustion, using a flow calorimeter, operating on the principle of thermocouple

GOST R 57942-2017: Polymer composite sheet piles. General technical requirements and test methods

GOST R 57953-2017: Ceramics composites. Test Method for bond strength of ceramic materials

GOST R 57968-2017: Polymer composites. Test method of samples for shearing

GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 57994-2017: Polymer composites. Test methods for fracture toughness definition and energy release speeds

GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST R 58004-2017: Reforestation. Specificаtions

GOST R 58063-2018: Trunk pipeline transport of oil and oil products. Geomoduls. General specifications

GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications

GOST R 58097-2018: Flexible reinfonced plastic pipes with thermal insulation and fittings for them for district heating and water-supply networks. General specification

GOST R 58106-2018: Paper for office equipment. Specifications

GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications

GOST R 58151.3-2018: Disinfectants. Methods for determining physical and chemical parameters

GOST R 58199-2018: Mining equipment. Anchor bolt of composite materials. General specifications

GOST R 58201-2018: Mining drilling for pneumatic and hydraulic anchorage installers. General specifications

GOST R 58205-2018: Mining. Determination of strength of conveyor belt mechanical fastenings. Static test method

GOST R 58257-2018: Trunk pipeline transport of oil and oil products. Fabric ballasting devices. General specifications

GOST R 58271-2018: Dry rubbing mixes. Technical conditions

GOST R 58281-2018: Crutches cane support. Technical conditions

GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions

GOST R 58324-2018: Suspended ceilings. General technical conditions

GOST R 8.621-2006: State system for ensuring the uniformity of measurements. Building materials and products. Moisture and heat conduction measurement procedure by the dielcometric method

GOST R 8.679-2009: State system for ensuring the uniformity of measurements. Technical metallic gauging tanks. Methods of verification

GOST R 8.682-2009: State system for ensuring the uniformity of measurements. Standard metallic gauges. Methods of verification

GOST R 8.725-2010: State system for ensuring the uniformity of measurements. Mechanical motion quantities measuring means for traction rolling stock. Verification procedure

GOST R 8.854-2013: State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. Methods of calibration

GOST R 8.880-2015: State system for ensuring the uniformity of measurements. Crude oil. Pipeline sampling

GOST R ISO 3126-2007: Plastics piping systems. Plastics components of piping systems. Determination of dimensions

GOST R ISO 9694-2003: Dental phosphate-bonded casting investments. General specifications

IO 200-RSFSR-15-0045-80: Typical technology for routine maintenance of daily, first, second and seasonal technical services for KAMAZ-5320, KAMAZ-5410, KAMAZ-5511

MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements

MDS 12-44.2008: Recommendations for drafting work on the construction of a railway track tower crane

MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3

MDS 12-68.2015: Work Project. The device rail track tower crane

MI 1652-90: State system for ensuring uniformity of measurements. Ultrasonic flowmeters with counter "Akustron" model UZR-V. Method of verification

MI 1747-87: Guidelines. State system for ensuring uniformity of measurements. Mass measures exemplary and general purpose. Method of verification

MI 1780-87: Guidelines. GSOEI. Tape exemplary and metal measuring tapes. Method of verification

MI 1850-88: State system for ensuring uniformity of measurements. Samples of surface roughness (comparison). Method of verification

MI 2024-89: State system for ensuring uniformity of measurements. Metal measuring rulers. Method of verification

MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification

MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets

MI 2220-13: Recommendation. State system for ensuring uniformity of measurements. Consumption and volume of waste liquid. Measurement technique in free-flow conduits by filling level with preliminary calibration of the measuring section

MI 2314-2000: Recommendation. GSOEI. Codifier of groups of measuring instruments

MI 242-82: Devices automatic tracking balancing KSM4, KSM4I, KSP4, KSP4I, KSU4. Methods and means of verification

MI 2522-99: Recommendation. State system for ensuring uniformity of measurements. Merniki of the 2nd category with a special scale of the type M2r-SSh. Method of verification

MI 2579-2000: State system for ensuring uniformity of measurements. Tanks (tanks) of river and sea bulk vessels. Method of verification by the volumetric method

MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique

MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices

MI 2673-2001: State system for ensuring uniformity of measurements. Standard and general purpose mass measures. Method of testing on the reference scales and comparators of the firm "Mettler-Toledo GmbH"

MI 2724-2002: State system for ensuring uniformity of measurements. Steel vertical cylindrical heat-insulated tanks. Method of verification by the geometric method

MI 2781-2003: State system for ensuring uniformity of measurements. Thermographs meteorological with bimetallic sensitive element M-16. Method of verification

MI 2800-2003: State system of measuring uniformity provision. Capacity of technological pipelines. Methodics of measuring by geometric method

MI 2801-2003: Recommendation. State system for ensuring uniformity of measurements. Capacity of oil pipelines. The method of measurement using the geometric method

MI 2876-2004: Recommendation. State system for ensuring uniformity of measurements. Hygrometers and meteorological hygrographs. Method of verification

MI 2933-2005: Recommendation. State system for ensuring uniformity of measurements. Devices for checking the belt tension. Method of verification

MI 2983-2006: Recommendation. State system for ensuring uniformity of measurements. Ultrasonic Flow Meters - Ultrasonic Meters UFM 500. Verification Methodology

MI 2992-2006: Recommendation. State system for ensuring uniformity of measurements. Buried trench tanks with capacity from 5,000 to 10,000 m3. Method of verification by the volumetric method

MI 3020-2006: State system for ensuring uniformity of measurements. Tanks (tanks) steel horizontal cylindrical river bulk vessels (barges). Method of verification by the geometric method

MI 3042-2007: State system for ensuring uniformity of measurements. Horizontal steel cylindrical tanks with elliptical and spherical bottoms for liquefied hydrocarbons with a capacity of 600 m3. Method of verification by the geometric method

MI 3056-2007: State system for ensuring uniformity of measurements. Tanks (tanks) steel vertical cylindrical with a rectangular insert (tankers and barges). Method of verification by the geometric method

MI 3171-2008: Recommendation. State system for ensuring uniformity of measurements. Steel vertical cylindrical tanks. Geometric calibration technique using laser scanning coordinate measuring systems

MI 492-91: Guidelines. Manometers of absolute pressure and manovacumometers two-pipe. Method of verification

MI 737-83: Guidelines. Hygrometer psychrometric type VIT. Methods and means of verification

MU 0397-00.001: Method of nondestructive testing of parts of the mud pump U8-6MA2

MU 0397-00.002: Non-Destructive Testing Methodology for VE-50 and VP-50 Swivels

MU 0397-00.003: Method of non-destructive testing of turbodrill parts

MU 0397-00.004: Methods of conducting non-destructive testing of parts of the boiler installation PPUA-1600/100

MU 0397-00.005: Methods of conducting non-destructive testing of parts of KTGU type keys

MU 0397-00.006: Non-Destructive Testing Technique for the A-50U Tack Block

MU 0397-00.007: Methods of non-destructive ultrasonic testing of elevators ETA, EHL, KM

MU 0397-00.008: Method of non-destructive testing of parts for the heating device of the ADPM-12 unit/150-У1

MU 0397-00.009: Method of non-destructive testing of parts of centrifugal pumps such as CNS 38-44 ... 220, CNS 60-198, CNS 105-98, CNS 180-476 ... 686, CNS 300-120 ... 600, CNS 500-19002

MU 0898-00.001: Methods of conducting non-destructive testing of hooks of lifting and transport equipment (automobile, tractor, trailer cranes and crane beams)

MU 1198-00.002: Methods of non-destructive ultrasonic testing of the weld zone of drill pipes of the TBPV type

MU 1198-00.003: Method of non-destructive ultrasonic testing of the crown block UKB-6-200

MU 1198-00.006: Method of conducting non-destructive testing of the pulley block

MU 1198-00.007: Method of nondestructive testing of hook blocks and lifting hooks

MU 1198-00.008: Method for non-destructive testing of brake bands of drawworks and winches of units for underground and workover of wells

MU 1198-00.009: UTBC-5-170 hook block non-destructive testing methodology

MU 1198-00.011: PBC-4 key non-destructive testing procedure

MU 1198-00.012: Methods of conducting non-destructive testing of HC-250 swivels

MU 1798-00.001: Methods of conducting non-destructive testing of the universal machine key UMK-1C

MU 1798-00.003: Methods of conducting non-destructive ultrasonic inspection of parts of the column head

MU 36.22.14-00: Guidelines for conducting static tests of crane-pipelayers

MU 4296/755-00.011: Method of conducting non-destructive ultrasonic testing of gearbox KPC-700

MU 4296/755-00.014: Method for non-destructive ultrasound testing of wellhead armature AUSHGN-UHL

MU 4296/755-00.021: Methods for conducting non-destructive ultrasonic testing of a tube block furnace PTB-10

MU 4296/755-00.023: Method of nondestructive testing of the worm box of the APR-2VB submachine gun

MU 6096-00.001: Method for the non-destructive testing of the shaft of the LV-44 winch

MU 6096-00.002: R-700 rotor shaft non-destructive testing procedure

NB ZhT TsP 017-99: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Safety standards Republished with changes

NB ZhT TsP 110-2003: Spring terminals of a flawless separate fastening ZhBR-65. Safety standards

NB ZhT TsP 142-2003: Covers with polymeric coating for insulating joints of railway rails. Safety standards

NB ZhT TsT 04-98: Electric locomotives. Safety standards

NB ZhT TsV-TsT 078-2003: Rubber sealing elements of rolling stocks brake pneumatic system. Safety norms

NPB 152-2000: Fire equipment. fire hose. Technical requirements of fire safety. Test methods

NPB 152-96: Fire hose. General technical requirements. Test Methods

NPB 153-96: Connecting heads for fire equipment. Basic Indexis. Test Methods

NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.

NPB 154-96: Fire valves. Basic Indexis. Test Methods

NPB 303-2001: Fire jumping down rescue devices. Technical requirements. Test methods

NPB 59-97: Water and foam fire fighting systems. Fire foam mixers and dose device. Nomenclature of indices. general technical requirements. Test methods

NPB 61-97: Fire engineering. Foam fire fighting systems. Low expansion foam generators for subsurface fire fighting systems of the tanks. General technical requirements. Test methods

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

ODM 218.2.047-2014: Method for assessing the durability of geosynthetic materials used in road construction

ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials

ODM 218.3.029-2013: Recommendations for the use of colored anti-skid coatings

ODM 218.3.059-2015: Guidelines for the use of electromagnetic devices for the operational control of the quality of soil compaction

ODM 218.3.060-2015: Guidelines for the repair of pavements consisting of cement concrete pavements, covered with asphalt concrete pavements, on public roads

ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities

ODM 218.5.006-2010: Recommendations on testing methods for geosynthetic materials, depending on their field of application in the road sector

ODM 218.5.007-2008: Guidelines for the installation of vertical markings on metal barrier fences using protective plastic panels

ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

OST 10 321-2003: Chicken eggs for incubation. Specifications

OST 108.030.129-79: Shaped parts and assembly units of Station and turbine pipelines of thermal power stations. General specifications.

OST 108.033.01-86: mechanical stokers. Technical conditions.

OST 13-15-79: Cutting boards for foods. Specifications

OST 13-40-75: Furniture springs.

OST 21-22-84: "Silakpor" sound absorbing plates. Specification.

OST 24.013.20-90: Forged steel rollers for cold rolling of metals. Specifications.

OST 26.260.454-99: Spiral wound gasket. Types and dimensions. General specifications.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 302-07-1152-92: Cylindrical helical compression springs. General specifications.

OST 34-72-645-83: Steel structures of pylons with voltage of 0.38-35 kV. General Specifications.

OST 35-26.0-86: Ceramsite concrete room units for transport construction. General technical requirements.

OST 39-204-86: Oil Laboratory Method for Determination of Residual Water Saturation of Oil and Gas Reservoirs Based On the Correlation Between Capillary Pressure and Saturation

OST 39-227-89: Water for flooding of oil reservoirs. Determination of the filtration performance and water-sensitiveness of low-permeable rock-reservoirs in-situ.

OST 39-228-89: Water for flooding of oil reservoirs. Assessment of compatibility of injected water with formation water and productive stratum rock.

OST 45.37-86: Organization of works regarding telephone repair.

OST 45.47-88: Local exchange coin boxes. Repair and testing procedures.

PB 03-381-00: Regulations of installation of vertical cylindrical steel reservoirs (steel scroll tanks) for petroleum and petroleum products

PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method

PNAE G-7-016-89: Standardized methods of control of basic materials (semifinished products), welded joints and cladding of equipment and of pipelines of NPP. Visual and a measuring control

PND F 12.1.2-99: Guidelines for sampling in determining the concentration of suspended particles (dust) in industrial emissions

PND F 13.1:2:3.71-11: Methods of measuring mass concentrations of polluting components (metals) in the air of the working area, atmospheric air, industrial emissions into the atmosphere by inductively coupled plasma atomic emission spectrometry (E-232-2010)

PNST 109-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt concrete. Method for determination of resistance to plastic flow of cylindrical samples at Marshall installation

PNST 110-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method of preparation of cylindrical specimens using Marshall installation

PNST 122-2016: Automobile roads of general use. Mineral materials for preparing asphalt mixtures. Method for determination of Rigden voids in mineral powder

PNST 125-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for preparation of cylindrical specimens for determining dynamic modulus

PNST 133-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of the dynamic modulus

PNST 135-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the fatigue strength under repeated bending

PNST 136-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. The method of determining the tensile strength and stiffness

PNST 179-2016: Road hot asphalt mixtures and asphalt concrete. Method for determination of bending tensile strength and ulimate relative tensile strain

PNST 181-2016: Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Method for determining the resistance to rutting by rolling a loaded wheel

PNST 184-2016: Automobile roads of general use. Road hot asphalt mixtures and asphalt concrete. Specifications

PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications

PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters

PNST 32-2015: Polymer film with nanocoating. General specifications

PNST 62-2015: Autonomous air disinfecting-cleaner. Specifications

PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport

R 3112199-0254-92: Time sheet of technological equipment for ATP of various capacities of TC and BTW

R 50.2.041-2004: State system for ensuring uniformity of measurements. Areometers glass. Method of verification

RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair

RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.

RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes

RD 15-12-2007: Methodical instructions on the procedure for testing steel ropes at cable test stations

RD 15-13-2008: Guidelines for the examination of industrial safety of compressor installations used in coal mines and mines

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 153-34.0-21.529-98: Method for Inspection of Reinforced Concrete Tanks for Liquid Fuel Storage

RD 153-34.1-27.301-2001: Test methods for ash collecting plants of thermal power plants and boilers

RD 153-39.1-059-00: Technique of technical diagnostics of gas control points

RD 16.407-2000: Explosionproof electrical apparatus. Repair

RD 22-28-32-94: Album of cards of standard technological processes for repair by methods of welding and building-up of nodes of load-lifting cranes

RD 31.3.3-97: Guidelines on technical control of waterworks in maritime transport. Ministry of Transport, DMT Soyuzmorniiproekt, 1997

RD 31.46.05-87: Typical test program for experimental and serial cable-type grabs

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers

RD 34.10.130-96: Instructions for visual and measuring control.

RD 34.17.425-86: Procedural Guidelines for X-Ray Detection of Macrodamage to Metal in Circulation Piping and Housing Equipment of Electric Power Generating Stations

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.24.602: Standard Procedure. Hardening Blades of Pulverizing Fans Type VM by Automatic Surfacing Method

RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.39.601: Guide to Repair of Fittings for Piping Systems at Pressure of 64-100 kgf/sq. cm

RD 34.41.601: Guide to Overhaul of Mud Pumps

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 38.14.008-94: Guiding Material. Radial (centrifugal) and axial fans. Maintenance and repair.

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

RMD 41-11-2012 Sankt-Peterburg: DESIGNING AND INSTALLATION OF HEAT SUPPLY SYSTEM IN SAINT-PETERSBURG

RMG 105-2010: State system for ensuring the uniformity of measurements. Vertical steel cylindrical tanks with thermal insulation. Procedure of verification bi geometrical method

RMG 108-2011: State system for ensuring the uniformity of measurements. Verticil reinforced-concrete tanks. Procedure of verification by volumetric method

RMG 112-2010: State system for ensuring the uniformity of measurements. Tanks of river and sea liquid cargo vessels. Procedure of verification by volumetric method

RST RSFSR 516-88: Eaves metal. Technical conditions

RST RSFSR 580-77: Bows. General technical conditions

RST RSFSR 605-89: Folding knives. General technical conditions

RST RSFSR 655-81: Ice screws fishing. General technical conditions

RST RSFSR 678-82: Cast-iron stoves. General technical conditions

RST RSFSR 698-83: Ovens made of sheet steel. Technical conditions

RST RSFSR 746-88: One-sided carriages. General technical conditions

RST RSFSR 749-88: Fresh celery. Technical conditions

RT 07-2011: Means for the adjustment of measuring instruments of hydrometeorological designation

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 17-02-2003: Guiding technical materials on the design and manufacture of steel-fiber-concrete structures on fiber, cut from sheet

RTM 17-03-2005: Guiding technical materials on the design, manufacture and use of steel fiber concrete structures on steel wire fiber

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

RTM 68-14.33-91: Manufacturing technology of plastic globes with a diameter of 210 mm

RTM 75-95: Process Guidelines for Factory Production of Prefabricated Prestressed Reinforced Concrete Structures -

SDOS-01-2008: Methodical recommendations about on the order of radiation control of technical devices and structures applied and operated on hazardous production objects

SNiP 5.02.02-86: Standards of construction tools requirements

SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation

SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules

SP 360.1325800.2017: Steel fiber reinforced concrete structures. Design rules

SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines

SP 42-105-99: Quality control of welded joints of polyethylene gas pipelines

SP 53-101-98: Manufacturing and quality control of steel structures for construction

SP 71.13330.2017: Insulation and finish coatings

SS-05: Method for determining the penetration of shaped charges at atmospheric pressure and ambient temperature of the Federal Service for Environmental, Technological and Atomic Supervision (SS-05)

ST RK 1278-2004: Road restrictions systems. Metal safety barriers. Specification

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

ST RK 1518-2006: Diesel locomotives. DC electric rotating traction machines. Requirements for acceptance programmes and test procedures

ST RK 242-92: Blanks for boxes and packs. Boxes and packs. Specification

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

ST RK 986-2012: Road vehicles. State registration licence plates of retroreflective surface for motor vehicles and their trailers, and blank plates. Specification. Put into effect in substitution of ST RK 986-2003

ST RK GOST R 50962-2008: Dishware and household products of plastic. General specification

ST RK GOST R 52579-2008: Consumers package from combined materials. General specification

ST SSFZhT TM 152-2003: Finishing carriage axles. Definition of the endurance limit of the necks of the axes. Typical test method

ST SSFZhT TM 153-2003: Finished car axles. Determination of cyclic fracture toughness. Standard test procedure

ST SSFZhT TM-TsP 115-2001: Broad gauge railway rails. Typical method for determining the performance of wide gauge rail rails.

ST SSFZhT TsL-TsT 146-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical methods of control of the macrostructure

ST SSFZhT TsP 107-2001: Crushed stone from natural stone for the ballast layer of the railway track. Typical test method.

ST SSFZhT TsP 112-2001: Composite linings for the joints of insulating rails. Typical methodology for conducting field testing.

ST SSFZhT TsP 120-2001: Special rolling stock. Springs rubber-type Megi. Typical test method

ST SSFZhT TsT 052-99: Shoes and brake pads for locomotives running on main railways. Standard testing method.

ST SSFZhT TsT-TsL-TsV 111-2001: Hydraulic dampers of railway rolling stock. Standard testing method.

ST SSFZhT TsT-TsRB 092-2000: Jib cranes on the rail track. Typical methods of dynamic (running) test drive

ST SSFZhT TsT-TsV-TsL 084-2000: Rolling stock of railways. Springs cylindrical screw carriages. Typical test method.

ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements

ST TsKBA 067-2008: Pipe fittings. Spiral-wound heat-resistant gaskets for body-to-lid connections. Types, main dimensions and technical requirements

ST TsKBA 082-2009: Pipe fittings. Input control

ST TsKBA 083-2010: Pipe fittings. Multi-layer bellows of alloy VT1-0. General technical conditions

ST TsKBA 087-2010: Pipe fittings. Electric drives. General technical conditions

ST TsKBA 090-2013: Pipe fittings. Pneumatic actuators and hydraulic actuators. General technical conditions

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

ST TsKBA 110-2013: Pipe fittings. Gland with a fusible metal seal. Designs and main dimensions. Technical requirements

STB 1011-95: Fresh rosehip fruits. Specifications

STB 1015-97: Cultural and general, and household products made of plastic. General specifications

STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions

STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions

STB 1357-2002: Industrial sewing machines. General specifications

STB 1373-2016: Semi-hard cheeses. Specifications

STB 1517-2004: Plastic consumer packaging. General specifications

STB 1520-2008: Materials for the horizontal marking of roads. Technical conditions

STB 1538-2013: Technical means of traffic management. Bumps. General specifications

STB 1566-2005: Roads automobile. Test methods

STB 1963-2009: Noodles. General specifications

STB 2083-2010: Green fresh vegetables. Requirements for the purchases, deliveries, and sales

STB 2106-2010: Pyrotechnic articles. Test methods

STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work

STB 2190-2017: Soft cheeses. General technical conditions

STB 813-93: Scissors. General specifications

STB 841-2003: Ceramic products. General specifications

STB 901-95: Fresh large-fruited cranberry. Specifications

STB GOST R 51756-2002: Aluminum banks of deep drawing with easy-to-open lids. Specifications

STB GOST R 51781-2002: Glass vessels for perfumes and cosmetics. General specifications

TR 83-98: Technical recommendations for the design and installation of internal sewage systems of buildings from polypropylene pipes and fittings

TR 94.03.1-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 94.03.1: Installation of Precast Concrete and Reinforced Concrete Structures for Sub-Grade P

TR 94.03.2-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 03.2: Construction of Super-Structures Made from Precast Reinforced Concrete Elements

TR 94.04-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 04: Construction of Brick Buildings

TR 94.07-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 07: Roofing Installation

TR 94.08-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 08: Waterproofing of Sub-Grade Portions of Buildings

TR 94.10-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 10: Sealing Joints in Exterior Building Enclosures

TR 94.11-05: Technological regulation of the operational quality control of construction, installation and special works during the construction of buildings and structures. 11. Painting and wallpaper production

TR 94.11-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 11: Painting and Wallpapering

TR 95.07-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 07: Sealing of Joints of Exterior Building Enclosures

TR 95.17-01: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures

TU 0991-123-53832025-2001: Steel fiber for dispersed concrete reinforcement

TU 0991-125-46854090-2001: Milled steel fiber for concrete reinforcement

TU 102-161-77: Coatings weighting reinforced concrete monolithic main pipelines such as PZHU

TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP

TU 102-190-78: Aluminum frame panels for walls of heated industrial buildings

TU 102-236-80: Panels of volume blocks of type OB and boxes of type UB

TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates

TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation

TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks

TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes

TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP

TU 102-367-84: Three-layer steel partition walls with mineral wool

TU 102-390-85: Vibrational low-frequency platforms with spatial oscillations of the HSV type

TU 102-425-86: A set of structures for the building of crane (crane) with structures frame production span of 12 and 18M

TU 102-462-88: Frame Asbestos-Cement Wall and Roof Panels with Mineral Wool Insulation

TU 102-463-88: Frameless three-layer roofing panels with mineral wool insulation

TU 102-464-88: Three-layer aluminum frame wall panels with mineral wool insulation

TU 102-522-89: Polyurethane foam sealing gaskets with acrylic impregnation and adhesive layer

TU 102-529-89: Mobile buildings (inventory) of the block-containers of the panel construction of the Neftegazstroy system

TU 102-533-89: A set of structures on a building without a crane with arched span of 12, 15 and 18 m

TU 102-545-90: Frameless three-layer steel roofing panels with mineral wool insulation of "Sandwich" type

TU 102-546-90: Frameless three-layer steel wall panels with mineral wool insulation "Sandwich" type

TU 102-569-90: Double-layer steel panels with a difficult-to-fire insulation under the roof of rolled materials

TU 1211-205-46854090-2005: Steel wire fiber for concrete reinforcement

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 13-427-78: An inclinometer. Technical conditions

TU 13-428-78: Altimeter. Technical conditions

TU 13-429-78: Goniometer. Technical conditions

TU 13-600-2-05-85: Tags. Technical conditions

TU 13-600-2-10-86: Parts of the floors and walls of country houses. Technical conditions

TU 13-600-2-12-86: Shield for snow retention. Technical conditions

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating

TU 1390-016-86695843-2011: External epoxy coating for pipes. Technical conditions

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-4-1731-92: Dowel-nails with zinc coated washers. Technical conditions

TU 1469-006-01297858-02: Specifications cold bending curves from steel electric-welded pipes with diameters of 720-1020 mm with insulating coating for main pipelines

TU 146930-08-01297858-05: Specifications for cold bending curves from steel electric-welded pipes with diameters of 530 and 1220 mm with insulating coating for main pipelines

TU 14-8-440-83: Refractory Thermal Insulating Slabs Made from Mullite-Silicon Wool on Clay and Organic Binders

TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions

TU 21-31-69-89: Gypsum fiber sheets. Technical conditions

TU 2244-001-42809359-02: Extruded polystyrene foam plates "Styrofoam". Technical conditions

TU 2244-056-04696843-98: Thermal Insulation "PENOFOL". Technical Specifications

TU 2244-069-04696843-00: Energofleks. Foam Polyethylene Products. Technical Specifications

TU 2246-004-56755147-2006: Rock sheet polymer to protect the insulated surface of pipelines. Technical conditions

TU 2248-048-00203536-98: Polyethylene pipes for high pressure gas pipelines (up to 1, 2 MPa). Technical conditions

TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions

TU 2531-005-01297858-2000: Sealing cuffs for pipelines over roads and railways laid in a protective case (casing)

TU 2531-007-01297858-02: Rubber-sealing cuffs for pipelines over roads and railways, laid in a protective case (casing)

TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions

TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions

TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-02-1162-95: Shell and tube heat exchangers for elevated temperatures and pressures with a floating head and a compensator on it. Technical conditions

TU 26-02-975-84: Tips to sleeves for loading and loading risers

TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3

TU 26-05-39-85: Ramp acetylene discharge with protective device PAP-15

TU 26-05-492-78: High pressure acetylene valves

TU 26-07-414-87: Cranes, type tension cone coupled on Ru 6. Specifications

TU 34-38-20111-96: Centrifugal pump TsN-400-105-U4 (3B-200x2). Technical conditions for repair

TU 34-38-20135-94: Tubular air heaters of stationary boilers. Technical conditions for major repairs

TU 34-38-20189-94: Gas-oil burners for steam stationary boilers. Technical conditions for major repairs

TU 34-38-20190-94: Burner, types pulverized steam stationary boilers. Technical conditions for major repairs

TU 34-38-20191-94: Headset stationary boilers. General technical conditions for major repairs

TU 34-38-20195-94: Fuel oil heaters of PM and PMR types. Technical conditions for major repairs

TU 34-38-20196-94: Steam heaters, water-water heat exchangers. Technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20219-94: Economizers smooth tube steam stationary boilers. Technical conditions for major repairs

TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs

TU 34-38-20222-94: Steam superheaters of stationary steam boilers. Technical conditions for major repairs

TU 34-38-20310-96: Centrifugal multistage sectional pumps CNS 180-85 ... 425. Technical conditions for repair

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 3449-006-17416124-00: Cable welded trays. Technical conditions

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 36.22.19.05-005-85: Selective pressure measuring devices. Technical conditions

TU 36.26.11.01-06-92: Windows and bindings of light emitting lamps. Technical conditions

TU 36-1180-85: Industrial Structures for Thermal Insulation of Pipelines, Apparatus and Tanks

TU 3612-005-00220302-98: Shell-and-tube heat exchangers for special purposes. Thermosiphon evaporators. Technical conditions

TU 3612-007-00220302-99: Shell-and-tube heat exchangers for special purposes. Vacuum capacitors. Technical conditions

TU 3612-013-00220302-99: Shell-and-tube heat exchangers for special purposes. Evaporators with steam space and tube bundles to them

TU 3612-014-00220302-99: Heat exchangers "pipe in pipe". Technical conditions

TU 36-1395905-015-95: A set of structures of buildings of arched type. Technical conditions

TU 36-1496-85: Cable prefabricated structures. Technical conditions

TU 36-2009-77: Steel structures of steel vertical cylindrical tanks with a capacity from 100 to 20,000 m3 for the storage of oil and oil products. Technical conditions

TU 36-2072-86: Boxes of lingering. Technical conditions

TU 36-2287-80: Bent closed welded square and rectangular profiles

TU 36-2745-85: Scrap steel Technical conditions

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

TU 3645-002-16989527-99: PKN-03 Cutter for manual oxygen cutting

TU 3645-033-05785477-98: Torch propane-oxygen for powder surfacing GN-5P

TU 3742-001-10995136-98: All-welded ball valves. Technical conditions

TU 4218-002-17416124-96: A series of posts, shields and boxes. Technical conditions

TU 4218-003-17416124-99: Connection box for electrical wiring. Technical conditions

TU 4218-008-51216464-01: Selection device. Technical conditions

TU 48-1-73-88: Feeder feeders from platinum metals and alloys. Technical conditions

TU 5210-001-25432924-2008: Fences, road, metal, barrier type

TU 5216-006-44884945-2006: Barrier retaining barriers for cars, side in unilateral and bilateral execution of the pavement and road groups

TU 5216-007-44884945-2006: Fencing road restraints for cars, the first type, groups 11Д and 11ДД

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

TU 5262-001-23083253-96: Expanded steel sheets. Technical conditions

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

TU 5270-001-44991977-97: Aluminum Alloy Windows and Doors

TU 5271-001-48810984-00: Window structures made of aluminum alloys for fencing balconies and loggias

TU 5284-001-56506912-03: The panel is sound-absorbing and soundproof, noise-proof. Technical conditions

TU 5361-002-39430024-07: Hardwood boards

TU 5366-002-50189474-07: Structural panels of chipboard with oriented chips and effective insulation for low-rise construction

TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration

TU 5369-005-54965805-05: Sets of parts and products wooden for collapsible saunas

TU 5728-006-93978201-2008: Sealing gaskets made of thermally expanded graphite (PUTG). Technical conditions

TU 5767-001-01297858-02: Heat-insulating segments and half-cylinders of extruded polystyrene foam "Peno-Plex" for pipelines with a diameter of 57-1420 mm

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

TU 5769-248-35354501-2007: Reinforcement non-metallic composite periodic profile

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

TU 5853-001-04000633-2006: Adjustable tip manholes. Technical conditions

TU 6-19-215-83: Pipes for electrical wiring. Smooth unplasticized polyvinyl chloride. Technical conditions

TU 64-13-14-88: Lysine fodder granulated

TU 6-49-14-89: Connecting parts from high-pressure polyethylene for pressure pipes

TU 67-18-163-93: Three-layer wall frameless panels with steel cladding and mineral wool insulation. Technical conditions

TU 67-269-79: Self-tapping screw. Technical conditions

TU 67-564-83: Swing gate type of GRP. Technical conditions

TU 68-2.211-91: Plastic globe (diameter 210 mm). Technical conditions

TU 9462-001-53908805-2006: Glass syringe filling ampoules for medicines

TU 9462-001-84299122-2010: Ampoules medical colorless and brown from glass of the 1st hydrolytic class

TU 95 1613-01: Polyethylene heat shrink tubes. Technical conditions

TU 9557-010-02570823-97: Cartographic products. Plastic globe (diameter 320 mm)

TU 95-82-81LU: Preparations from fluoroplast-40 of the mark "P" and fluoroplast-42 of the mark "P"

TU U 29.4-30482268.002-2001: Check valves, flame arresters and shut-off valves, as well as their combinations for gas-flame treatment of metals types KO, OB, OT

VMU 50:48:0075-02-02: Platform buffers. General requirements for design, construction and operation

VSN 003-88: Design and Installation Guidelines to Plastic Piping

VSN 51-1.15-004-97: Instructions on the design and construction of fiber-optic communication lines (FOCL) for gas pipelines

VSN 68-97: Guidelines for Thermal Insulation of Joints Around Window and Door Assemblies in Exterior Wall Panels of Residential and Public Occupancies by Spray Application of Single-Component Foam Polyurethane System "Vilan-405

VSN 8-94: Industry-Specific Building Code for Installation of Domestic Water Supply Systems Equipped with Water Meters, Backflow/Distribution Valves, and Flexible Connectors for Plumbing Fixtures

808-2017 PKB CV: Instructions for the maintenance of wagons in operation (Instructions for the inspector of wagons)

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 10935-2019: Cargo freight cars. General specifications

GOST 10944-2019: Manual and locking taps for water heating systems of buildings. General specifications

GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 12393-2019: Rail contact network fittings linear. General specifications

GOST 12730.5-2018: Concrete Methods for determining water resistance

GOST 13087-2018: Concrete Abrasion Determination Methods

GOST 13843-2019: Aluminum wire rod. Technical conditions

GOST 15136-2020: Refractory products. Methods for measuring the depth of bumping of corners and edges

GOST 16080-2019: Salted Pacific salted fish. Technical conditions

GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions

GOST 1725-2019: Fresh tomatoes for industrial processing. Technical specifications

GOST 1726-2019: Fresh cucumbers for industrial processing. Technical specifications

GOST 1811-2019: Ladders for building sewage systems. Technical specifications

GOST 18908.2-2019: Cut flowers. Chrysanthemums Technical specifications

GOST 18908.8-2019: Cut flowers. Gerbera. Technical specifications

GOST 19437-2019: Cylindrical aluminum ingots. Technical specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 20967-2019: Rod made of aluminum alloys. Technical conditions

GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing

GOST 23855-2019: Cylindrical ingots from aluminum alloy AD31. Technical conditions

GOST 24033-2018: Windows, doors and gates. Mechanical test methods

GOST 24468-2020: Refractory products. Method for determining the apparent density and total porosity of thermal insulation products

GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications

GOST 25749-2020: Metal screw covers. General specifications

GOST 27180-2019: Ceramic tiles. Test methods

GOST 2787-2019: Ferrous metals are secondary. General specifications

GOST 28722-2018: Agricultural machinery. Mowers and mower conditioners. Test methods

GOST 28887-2019: Pollen stalk. Technical specifications

GOST 30136-95: Carbon steel rod of ordinary quality. Technical specifications

GOST 30815-2019: Automatic thermostats of heating devices for water heating systems in buildings. General specifications

GOST 31358-2019: Dry building floor mixes. Technical specifications

GOST 32309-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications

GOST 32624-2020: Crown covers. General specifications

GOST 32700-2020: Railway rolling stock. Adhesion control methods

GOST 33225-2015: Footwear. Methods for determining linear dimensions

GOST 33414-2015: Ceramic packaging. General specifications

GOST 33416-2015: Metal rolling covers. General specifications

GOST 33417-2015: Plastic packaging for household use. General specifications

GOST 33421-2015: Composite and ceramic-metal brake shoes for railway rolling stock. General specifications

GOST 33716-2015: Blanks of boxes and packs. Boxes and packs. Technical specifications

GOST 34058-2017: Internal buildings and structures utilities. Mounting and start-up adaptive control of air-conditioning evaporative and condensing units. General technical requirements

GOST 34218-2017: Fresh fennel. Technical conditions

GOST 34257-2017: Packaging. Bar-top stoppers and over capsule for glass bottles. General specifications

GOST 34452-2018: Disconnectors for the traction network of railways and their drives. General specifications

GOST 34490-2018: Machines for post-harvest processing of potatoes. Test methods

GOST 34496-2018: Milking installations and devices for cows. Test methods

GOST 34498-2018: Agricultural machinery. Machines for post-harvest processing of vegetables and gourds. Test methods

GOST 34499-2018: Agricultural machinery. Machines for harvesting vegetables and gourds. Test methods

GOST 34534-2019: Packaging. Polymer bottles for food liquids. General specifications

GOST 34562-2019: Metal covers, easily openable. General specifications

GOST 34568-2019: The main pipeline transport of oil and oil products. Cameras for starting and receiving cleaning and diagnostic tools. General specifications

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 34599-2019: Semi-solid and solid fibreboard. Technical conditions

GOST 34610-2019: Pipe fittings. Electric drives. General specifications

GOST 34645-2020: Pipes and pipeline parts made of thermosetting plastics reinforced with fiberglass. Methods for obtaining the hydrostatic design basis and the calculated pressure value

GOST 34648-2020: Fiber-reinforced thermosetting plastics pipes and pipeline parts. Methods for determining the resistance of pipes and fittings to short-term effects of internal hydraulic pressure

GOST 3634-2019: Manholes for manholes and storm water inlets for stormwater wells. Technical specifications

GOST 5541-2019: Cork closures. General specifications

GOST 598-2020: General purpose zinc sheets. Specifications

GOST 6133-2019: Concrete wall stones. Technical conditions

GOST 6235-2020: Nickel sheets and strips. Specifications

GOST 767-2020: Copper anodes. Specifications

GOST 8.215-2019: State system for ensuring uniformity of measurements. Flat glass plates for interference measurements. Verification Method

GOST 8829-2018: Prefabricated reinforced concrete and concrete products. Load test methods. Rules for evaluating strength, stiffness and crack resistance

GOST 9498-2019: Flat bars of aluminum and aluminum wrought alloys for hire. Technical specifications

GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods

GOST R 51049-2019: Fire fighting equipment. Pressure head fire hoses. General technical requirements. Test methods

GOST R 51162-2019: Dishes without non-stick coating cast from aluminum alloys. General specifications

GOST R 51191-2019: Nodes of prostheses of the lower extremities. Technical requirements and test methods

GOST R 53266-2019: Fire fighting equipment. Fire rescue rope. General technical requirements. Test methods

GOST R 53267-2019: Fire fighting equipment. Firefighter carbine. General technical requirements. Test methods

GOST R 53269-2019: Fire fighting equipment. Helmets are fire. General technical requirements. Test methods

GOST R 53275-2019: Fire fighting equipment. Manual fire ladders. General technical requirements. Test methods

GOST R 56805-2015: Polymer composites. Methods for determination of flexural properties

GOST R 58053-2018: Lifts. Installation, starting-up and adjustment works of dispatch control systems. Rules of the organization and manufacture of works, performance control and requirement for results of works

GOST R 58344-2019: Earthing switches and grounding devices for various purposes. General technical requirements for anode grounding of electrochemical corrosion protection installations

GOST R 58351-2019: General automobile roads. Frontal road fences, holding lateral combined and holding pedestrian. General technical requirements. Testing and control methods. Application rules

GOST R 58360-2019: Dish-shaped anchors for fastening a heat-insulating layer in facade heat-insulating composite systems with external plaster layers. Test methods

GOST R 58382-2019: Fire fighting equipment. Portable fire smoke exhausters. General technical requirements. Test methods

GOST R 58401.11-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Multiple Bending Fatigue Test Method

GOST R 58401.12-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining the dynamic modulus of elasticity using the installation of dynamic loading (SPT)

GOST R 58401.14-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Sample preparation method for determining the dynamic module

GOST R 58401.7-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining creep and indirect tensile strength (IDT)

GOST R 58402.7-2019: General automobile roads. Mineral materials for the preparation of asphalt mixtures. The system of volumetric-functional design. Method for determination of Rigden voids in mineral powder

GOST R 58406.3-2020: Automobile roads for general use. Road asphalt concrete mixtures and asphalt concrete. Method for determination of rutting resistance by rolling a loaded wheel

GOST R 58406.4-2020: Automobile roads for general use. Road asphalt concrete mixtures and asphalt concrete. Preparation of sample slabs with a roller compactor

GOST R 58406.7-2020: Automobile roads for general use. Road asphalt concrete mixtures and asphalt concrete. Method for determining the effect of anti-icing reagents

GOST R 58406.8-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Determination of resistance to plastic flow by the Marshall method

GOST R 58406.9-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Marshall gasket sample preparation method

GOST R 58409-2019: Unpackaged complete distribution devices for voltage up to 35 kV for traction and transformer substations of the railway. General specifications

GOST R 58514-2019: Building levels. Technical conditions

GOST R 58518-2019: Steel construction hammers. Technical conditions

GOST R 58523-2019: Hip abduction apparatus for children. Technical requirements and test methods

GOST R 58527-2019: Wall materials. Methods for determining compressive and bending strengths

GOST R 58540-2019: Fire fighting equipment. Semi-rigid pressure fire hoses. General technical requirements. Test methods

GOST R 58558-2019: Wooden structures. Glued rods Test methods for determining standard values ​​of mechanical characteristics

GOST R 58559-2019: Wooden structures. Metal gear keys. Test methods

GOST R 58562-2019: Wooden structures. Metal ring keys. Test methods

GOST R 58584-2019: Mining engineering. Switch points in self-rescuers. Safety requirements. Test methods

GOST R 58683-2019: Doors are ship internal fire-retardant type "B". General technical requirements

GOST R 58685-2019: Permeable ship doors. Test Methods and Types

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions

GOST R 58703-2019: Universal athletic benches. Technical requirements and test methods

GOST R 58722-2019: Modular sports floorings collapsible. Technical specifications

GOST R 58723-2019: Artificial ice for hockey. General specifications

GOST R 58725-2019: Covers sports rubber rolled. Technical specifications

GOST R 58726-2019: Polymer and rubber tile coatings. Technical specifications

GOST R 58728-2019: Dumbbells sports variable and constant weight. Technical specifications

GOST R 58729-2019: Protections of ice hockey rinks. Technical specifications

GOST R 58755-2019: Mobile scaffolds, collapsible. Technical specifications

GOST R 58756-2019: Polymer multilayer domes. Technical specifications

GOST R 58757-2019: Fiberglass products for the installation of decorative and facing elements of building facades. Technical specifications

GOST R 58758-2019: Platforms and stairs for construction works. General specifications

GOST R 58767-2019: Building solutions. Test Methods

GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications

GOST R 58891-2020: Profile elements for facade thermal insulation composite systems with external plaster layers. Specifications

GOST R 58893-2020: Polyurethane-based adhesive compositions for fixing the thermal insulation layer in facade thermal insulation composite systems with external plaster layers. Specifications

GOST R 58896-2020: Concrete is chemically resistant. Test methods

GOST R 58900-2020: Bent steel sheet profiles with trapezoidal corrugations for construction. Load-bearing test method

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 58921-2020: Sports equipment safety standards system. Sports equipment for fall protection. The ropes are dynamic. General technical requirements. Test methods

GOST R 58922-2020: Sports equipment safety standards system. Sports equipment for fall protection. Strapping. General technical requirements. Test methods

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 58950-2020: Fencing structures of buildings. Method for determining the effective service life of polymer thermal insulation

GOST R 8.975-2019: State system for ensuring the uniformity of measurements. Sources of microflows of gases and vapors. General specifications

I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MI 516-84: Methodical instructions. Caliper of the traveling PShV type. Verification Method

MU 2002-2002: Methodology for examining the technical condition of cabinet elevators for drill and casing KM type and cast elevators for casing EN type to determine the possibility of their further operation

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

MVI 60-09: Methodology for measuring the anticorrosion characteristics of samples of mineral and flame-retardant (type OMTI) turbine oils

MVI 62-09: Methodology for measuring the mass fraction of sludge in samples of mineral energy oils

NB ZhT TsT 01-98: Diesel train Safety Standards Change №1

NPB 153-2000*: Fire fighting equipment. Fireheads connecting. Technical requirements for fire safety. Test methods

NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods

NPB 161-97*: Special protective clothing for firefighters against increased heat. General technical requirements. Test methods

NPB 167-97*: Fire rescue rope. General technical requirements. Test methods

NPB 171-98*: Manual fire ladders. General technical requirements. Test methods

NPB 173-98*: Helmets are fire. General technical requirements. Test methods

ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology

ODM 218.3.097-2017: Guidelines for determining the resistance of compacted asphalt concrete mixtures to plastic flow at a Marshall installation (on samples with a diameter of 152.4 mm)

ODM 218.3.108-2019: Guidelines for the application of various methods of compaction of asphalt mixtures in the laboratory

OSN-APK 2.10.16.001-04: Instructions for the manufacture and quality control of glued wooden structures for industrial agricultural buildings (in the development of SNiP II-25-80)

OST 32.156-2000: Spring bar terminals for fastening rails. Specifications (with Amendment No. 1)

PI 1.4.75-2000: Arc welding in shielding gases of structural, stainless and heat-resistant steels and alloys

PNST 179-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining tensile strength in bending and ultimate tensile strength

PNST 181-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining resistance to rutting by rolling a loaded wheel

PNST 325-2019: General automobile roads. Mixtures of crushed stone, gravel and sand, treated with organic binders. Technical specifications

PNST 333-2018: Russian quality system. Comparative tests of preserves from herring fillet in oil

PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications

PNST 362-2019: General automobile roads. Cold asphalt mixes and asphalt mixes. Technical conditions

PNST 391-2020: High-strength steel packaging tape. Technical specifications

PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders

RD 112 RSFSR-023-89: Guidelines. GSE. Capacity technological pipelines. Measurement Technique

RD 32 TsV 052-2005: Repair of freight car trucks

RD 34.47.602-75: Guidelines for the overhaul of the VMD-35 oil circuit breaker

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

RD 34.47.605-78: Guidelines for the overhaul of the oil switch VMG-10-630-20 and VMG-10-1000-20

RD 34.47.612-86: Guidelines for the overhaul of VT-35-630-10VI and VTD-35-630-10VI oil circuit breakers

RD 34.47.613-74: Guidelines for the overhaul of the oil circuit breaker VMP-10P

RD 39-108-91: Guidelines for determining the magnitude of technological losses of oil gas during its production, collection, preparation and inter-field transportation

RD 50:48:0075.02.05: Platform buffers. Recommendations for design, construction and operation

RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives

Resolution 137/9-50: Typical consolidated norms of time for the repair of plumbing and sewerage equipment

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 432.1325800.2019: Fireproof coatings. Condition Monitoring

SP 470.1325800.2019: Steel structures. Work Rules

ST RK 986-2003: Road transport. State registration number plates with a retroreflective surface for motor vehicles and their trailers. Technical specifications

ST SEV 4178-83: Wooden doors. Method of testing the static load resistance to force acting along the plane of the door

ST SEV 4179-83: Wooden doors. Resistance Test Method for static load acting perpendicular to the plane of the door

ST SSFZhT TM 151-2003: The wheels are seamless. Determination of the endurance limit of the disk. Typical Test Procedure

ST SSFZhT TsT 042-99: Certification system standard for the federal rail transport. Brake discs of engine carrying equipment applied for railways. Standard testing procedure.

ST TsKBA 083-2016: Pipeline fittings. Multi-layered bellows made of alloy ВТ1-0. General technical specifications

ST TsKBA 116-2015: Pipe fittings. Reliability tests. Recommendations on the development of the program and test methods

ST TsKBA 117-2017: Pipe fittings. Methods of hydraulic calculation of check valves and gates

STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TSN KR-97 MO: Roofing. Technical requirements and acceptance rules

TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines

TU 25.12.30-77: Inserts cut from emerald grown for jewelry. Technical conditions

TU 32 CP 828-97: Rubber parts for railway leveling

TU 36-26-11-4-89: Steel building construction, vertical cylindrical tanks for oil and petroleum products with a volume of 100 to 50,000 m3. Technical conditions

TU 3680-001-04698606-04: Pipe Support

TU 3681-134-00220302-2007: Air coolers block-modular complete AVG-KB. Technical specifications

TU 38 0051166-98: Rubber compounds for the rubber products of aircraft

TU 5216-021-00110604-03: Road guardrail for cars, side, first type, metal, single-sided

TU 5216-025-00110604-2006: Road safety rails, for vehicles, lateral, first type, double-sided

TU 5216-067-36910961-2002: Retention fences, for vehicles, side, first type, single-sided and double-sided

TU 6-06-19-88: Parts and blanks from polyimide press materials

TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Hoisting cranes. Rules and test methods
Language: English
Price: $393.39
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Cable products for nuclear power plants. Technical requirements of the operating organization
Language: English
Price: $449.11
Rolling stock of railways. Springs cylindrical screw. Certification requirements
Language: English
Price: $175.65
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On Restriction of the Use of Hazardous Substances in Electrical and Radioelectronic Products"
Language: English
Price: $83.16

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!