imgalt

GOST 380-2005

ГОСТ 380-2005

Common quality carbon steel. Grades

Сталь углеродистая обыкновенного качества. Марки

Status: Effective - Supersedes. (IUS 10-2007). With the right of early application. The date of introduction was postponed from 01/01/2008 to 01/01/2008 (IUS 5-2008)

Standard applies to carbon steel of ordinary quality, intended for the manufacture of hot rolled: profiled, shaped, plate, sheet, broadband and cold rolled sheet, and ingots, blooms, slabs, billets, blanks rolled and continuously cast, pipes, forgings and stampings, strips, wire, hardware, etc.

Стандарт распространяется на углеродистую сталь обыкновенного качества, предназначенную для изготовления проката горячекатаного: сортового, фасонного, толстолистового, тонколистового, широкополосного и холоднокатаного тонколистового, а также слитков, блюмов,слябов, сутунки, заготовки катаной и непрерывнолитой, труб, поковок и штамповок, ленты, проволоки, метизов и др.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 7/20/2007

SKU: RUSS20560

Price: $54.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.20 Steel »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V2 Carbon steel of ordinary quality (ordinary stock) » V20 Classification, nomenclature and general rules »


As a Replacement Of:

GOST 380-94: Normal quality carbon steel

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 380-94: Normal quality carbon steel

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

The Document is Referenced By:

ATK 24.201.17-90: Stirrers. Types, parameters, design, main dimensions and technical requirements

ATK 26-18-5-93: Album typical designs. Steel turning plugs for rebar flanges. Design, dimensions and specifications

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10674-2022: Tank wagons. General specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 10935-2019: Cargo freight cars. General specifications

GOST 10935-2022: Covered freight cars. General specifications

GOST 11004-84: Principal ventilation mine blowers

GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications

GOST 11474-76: Bent-steel sections. Specifications

GOST 1153-2019: Brackets for washbasins and sinks. Technical specifications

GOST 11679.1-2018: Rubber-metal instrument shock-absorbers. Specifications

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12.3.028-82: Processes of treatment materials by abrasive and borazon tools

GOST 12504-2015: Concrete and reinforced concrete panels for internal walls of residential and civil buildings. General specifications

GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications

GOST 13663-86: shaped steel pipes technical requirements

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 16277-93: Plates of separate fastening for railway rails of types p50, p65 and p75

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 16549-2019: Cast iron plug-through cranes, coupling cast iron, for nominal pressure PN? 1.0 MPa (10 kgf / cm2) with a plug for draining water

GOST 16556-2016: Ground connections for movable electric units. General specifications

GOST 16775-93: Plain snap gauges with cemented carbide alloy plates for diameters from 3 to 180 mm. Dimensions

GOST 18048-2018: Reinforced сoncrete sanitary cabins. Specifications

GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications

GOST 19330-2013: Masts (poles) for overhead contact line supports of railways. Specifications

GOST 19433-88: Dangerous goods. Classification and marking

GOST 19570-2018: Panels made of autoclaved aerated concrete for floors of residential and public buildings. Technical specifications

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 20425-2016: Concrete Tetrapod for Costal Protecting Installations

GOST 21096-75: Window steel panels of hot-rolled and roll-formed sections for industrial buildings

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22332-93: Strip lifting screws for wooden cast patterns. Design

GOST 22343-2014: Clamp of indirect rail fastening of railway. Specifications

GOST 23190-2018: Book-selling furniture. General specifications

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23508-2018: Book-selling furniture for storage facilities. General specifications

GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications

GOST 26598-2018: Containers and means of packaging in building. General specifications

GOST 26686-2022: Flatcars. General specifications

GOST 26725-2022: Open wagons. General technical conditions

GOST 27321-2018: Demountable tubular scaffold for constructional works. Specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 28919-91: Flange connections of wellhead equipment. Types, basic parameters and dimensions

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30630.1.10-2013: Test methods for resistance to mechanical external influencing factors for machines, instruments and other industrial products. Strikes on casing of device

GOST 30894-2003: Production well head equipment. General technical requirements

GOST 31173-2016: Steel doors. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31559-2012: Anchor supports. General pecifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 32020-2012: Elastomeric bearings for bridge building. Specifications

GOST 32216-2013: Special railway rolling stock. General technical requirements

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32586-2013: Vibroinsulators rubber and rubber-reinforced for automotive technic. Specifications

GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 32694-2014: Plates for spike fastening of railway. Specifications

GOST 32760-2014: General use highways. Traffic bollards. Test methods

GOST 32871-2014: Automobile roads of general use. Pipes for road culvert. Technical requirements

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements

GOST 32947-2014: Automobile roads of general use. Supports of stationary electric lighting. Technical requirements

GOST 32948-2014: Automobile roads of general use. Supports of road signs. Technical requirements

GOST 33008-2014: Fireplaces, fireplace inserts, for solid fuels. Requirements and methods of testing

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33683-2015: Polymer composite constructions of covered hopper wagons of 1520 mm gauge for bulk materials. Specifications

GOST 33684-2015: Polymer composite roofs for covered freight cars of 1520 mm gaugemain line railways. Specifications

GOST 33752-2017: Steel welded cylinders for liquefied hydrocarbon gas, used as motor fuel on automotive vehicle. Specifications

GOST 33762-2016: Products and systems for the protection and repair of concrete structures. Requirements for injection-sealing compounds and seals of cracks, cavities and clefts

GOST 33796-2016: Railway multiple units. Durability and dynamics requirements

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 33950-2016: Pyrotechnic products. Test methods

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34075-2017: Brake block holder and key for railway rolling stock. General specifications

GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications

GOST 34329-2017: Formworks. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications

GOST 34636-2020: Pipe billet. General specifications

GOST 34649-2020: Cold-rolled steel thin-sheet products, galvanized with polymer coating from continuous lines. Specifications

GOST 34708-2021: Pipe fittings. Sealing materials based on thermally expanded graphite. General specifications

GOST 34861-2022: Non-asbestos sealing sheets and gaskets made of them. Technical conditions

GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 3634-2019: Manholes for manholes and storm water inlets for stormwater wells. Technical specifications

GOST 4686-74: Brake beams of brake leverage gear for 1520 (1524) mm wide gauge main-line railway freight car bogie-trucks. Specifications

GOST 5151-79: Wooden drums for electrical cables and wires. Specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5546-86: Oils for refrigerating machines

GOST 5799-2022: Flasks for paints and varnishes. Specifications

GOST 5812-2014: Fastening for railways. General technical specifications

GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications

GOST 5973-2022: Dumper cars. General specifications

GOST 6625-85: Mine local ventilating fans

GOST 7090-72: Single-rotor hammer crushers

GOST 7140-98: Industrial explosives. Test methods in methane air and dust air mixtures

GOST 7370-2015: Railway frogs. Specifications

GOST 8.393-2010: State system for ensuring the uniformity of measurements. Optical Quadrants. Verification procedure

GOST 809-2014: Track wood screws. General technical specifications

GOST 8717-2016: Concrete and reinforced concrete steps. Specification

GOST 9396-88: Boxes wooden reusable

GOST 9570-2016: Box and pestpallets. General specifications

GOST 9690-71: Lanyard stoppers

GOST ISO 28927-12-2014: Mechanical vibration. Evaluation of vibration emission of hand-held power tools. Part 12. Die grinders

GOST R 50577-2018: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50577-93: Licence plates for vehicles. Types and main sizes. Technical requirements

GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods

GOST R 50982-2019: Fire fighting equipment. Tool for special work in fires. General technical requirements. Test methods

GOST R 51271-99: Pyrotechnic goods. Methods of tests

GOST R 51382-2011: Heating boilers. Part 4. Heating boilers with forced draught burners. Special requirements for boilers with forced draught oil burners with output up to 70 kW and maximum operating pressure of 0,3 MPa. Terminology, special requirements, test methods and marking

GOST R 51659-2000: Tank cars of 1520 mm gauge main line railways. General specifications

GOST R 52153-2003: Radiation-protective boxes. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52751-2007: Steel-fibro-concrete slabs for bridge spans. Specifications

GOST R 52762-2007: Mechanical environment stability test methods for machines, instruments and other industrial products. Test methods for bumps to enclosure of products

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53256-2019: Fire fighting equipment. Respiratory apparatus with compressed oxygen with a closed breathing cycle. General technical requirements. Test methods

GOST R 53266-2009: Fire equipment. Fire saving cord. General technical requirements. Test methods

GOST R 53266-2019: Fire fighting equipment. Fire rescue rope. General technical requirements. Test methods

GOST R 53268-2009: Fire equipment. Fire safety belt. General technical requirements. Test methods

GOST R 53272-2009: Fire equipment. Fire rope descanters. General technical requirements. Test methods

GOST R 53276-2009: Fire equipment. Hanging ladders for rescue from height. General technical requirements. Test methods

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 53686-2009: Welding. Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metal

GOST R 53932-2010: Tube billet. General specifications

GOST R 53960-2010: Metal frame yield supports. Trapezoid supports. General specifications

GOST R 53978-2010: Special railway rolling stock. General technical requirements

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54270-2010: Masts (Poles) for overhead contact line supports of railways. Specifications

GOST R 54440-2011: Heating boilers. Part 1. Heating boilers with forced draught burners. Terminology, general requirements, test and marking

GOST R 54574-2011: Steel drums for paint materials. Specifications

GOST R 54889-2012: Reusable semirigid slings. Specifications

GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55085-2012: Cylinders steel welded on pressure 1,6 MPа for liquefied hydrocarbon gas, used as motor fuel on car transport facility. Specifications

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties

GOST R 55602-2013: Switching devices for railway traction network and power substations earthling. General specifications

GOST R 55682.2-2017: Water-tube boilers and auxiliary installations. Part 2. Materials for pressure parts of boilers and accessories

GOST R 55727-2013: Mining equipment. Mine loading cars. General technical requirements and test methods

GOST R 55731-2013: Mining equipment. Metal frame yield supports. Ring supports. General specifications

GOST R 55819-2013: Brake block holder and key for railway rolling stock. General specifications

GOST R 55821-2013: Bogies of passenger cars on locomotive traction. Specifications

GOST R 56204-2014: Steam and hot-water stationary boilers. Steel structures. General operating specification

GOST R 56296-2014: Metal gate devices for explosives facility sites. Technical requirements and strength assessment

GOST R 56354-2015: Cold formed sheet piling of non alloy steels. Specifications

GOST R 56434-2015: Equipment for sports games. Basketball equipment. Functional requirements, safety requirements and test methods

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56944-2016: Cranes. Overhead crane railway. General specifications

GOST R 57414-2017: Roofing and hydraulic-insulating flexible bituminous and polymeric (thermoplastic or elastomer) materials. Method for determination of hair resistance

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST R 58067-2018: Maintenance of ships under construction, refit and repair. Heating systems of ship’s compartments. Requirements

GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications

GOST R 58089-2018: Mining equipment. Suspension gears for mine cages. General specifications

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

GOST R 58345-2019: Anchor chains. Marking the length. Types and specifications

GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications

GOST R 58513-2019: Plumbing steel construction. Technical conditions

GOST R 58515-2019: Trowel, shovels and cuts. Technical conditions

GOST R 58518-2019: Steel construction hammers. Technical conditions

GOST R 58599-2019: Technical diagnostics. Diagnostics of steel structures. Magnetic coercimetric method. General requirements

GOST R 58620-2019: The main pipeline transport of oil and oil products. Tank equipment. Acceptance devices for tanks. General specifications

GOST R 58654-2019: Automobile roads for general use. Spiral corrugated metal pipes. Specifications

GOST R 58684-2019: Fireproof ship doors. General specifications

GOST R 58728-2019: Dumbbells sports variable and constant weight. Technical specifications

GOST R 58753-2019: Cargo rope slings for construction. Technical specifications

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 58935-2020: Forms for the manufacture of reinforced concrete vibrohydropressed pressure pipes. Specifications

GOST R 59620-2022: Public roads. Spherical (spherical segmental) combined bearing parts for bridge structures. General specifications

GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements

GOST R 59687-2022: Metal panels with foam insulation. General technical specifications

GOST R 70463-2022: Four- and six-axle flatcars. General specifications

GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications

GOST R 70548-2022: Hard coal. Method for determining the yield of liquid products from the plastic mass of coal

GOST R 70617-2022: Details of the grounding of marine electrical equipment and cables. Specifications

GOST R 70693-2023: Fire-fighting equipment. Hose-delays. General technical requirements. Test methods

GOST R 70726-2023: Modular swimming pools. General technical conditions

GOST R 70817-2023: Steel and alloys. Names and basic designations of grades

GOST R 70859-2023: Electrode mass for self-firing electrodes of electrothermal furnaces. Technical conditions

GOST R ISO 11003-2-2017: Adhesives. Determination of shear behaviour of structural adhesives. Part 2. Tensile test method using thick adherends

GOST R ISO 28927-1-2012: Vibration. Evaluation of vibration emission of hand-held power tools. Part 1. Angle and vertical grinders

M-01V/2011: Method for measuring the mass concentration of metals in emissions of pollutants into the atmosphere and in the air in the working zone of industrial enterprises

MDS 12-56.2010: Wire rope slings for construction. Recommendations for compilation of technical specifications

MDS 12-58.2011: Scaffolding. Manufacturing, installation, operation

MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3

NP 1.6-81: Boarding homes for the disabled (18 - 45 years)

NRP-93: Norms for strength calculation of transport packaging kits for transportation of nuclear fissile materials

ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)

ODM 218.2.025-2012: Expansion joints of automobile bridges

ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads

ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads

ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes

ODM 218.6.004-2011: Guidelines for road safety ensuring rope guardrails

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26-01-66-86: cap trays for steel columns. Parameters, design and dimensions.

OST 26-04-2387-79: Steel plugs to test vessels and apparatus for Py 0.1 MPa (1 kg/cm2), Py 0.6 MPa (6 kg/cm2). Design and dimensions.

OST 26-2011-83: Welded vessels and apparatus hatches. Technical requirements.

OST 26-2015-83: Hinge and tilt-up Devices for manhole covers of welded steel of vessels and apparatuses. Technical requirements .

OST 34 023-74: Winches special electric gantry hook cranes. Parameters and dimensions. Technical requirements

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

OST 36-60-81: Welding at installation of steel building constructions. Main provisions.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PB 10-574-03: Safety Operation and Design Codes for Steam and Hot Water Boilers

PB 10-575-03: Requirements for the Design and Safe Operation of Electric Boilers and Electric Boiler Plants

PB 11-401-01: Safety regulations for gas-handling facilities of metallurgic and coke-chemical industries and enterprises

PNST 309-2018: Roads are public. Bridges and pipes road. Technical requirements

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications

PNST 790-2022: Engineering networks of buildings and structures internal. Axial bellows compensators for pipelines of heating, heating and water supply systems. General specifications

PVKM 79: Instructions for the design of railway temporary and short-term bridges and pipes

R 412-81: Recommendations for the design and construction of offshore subsea oil and gas pipelines

RD 03-380-00: Guidelines for Inspection of Spherical Tanks and Gas Holders for Storage of Liquefied Gases Under Pressure

RD 03-410-01: Instructions on the procedure of comprehensive engineering certification of cryogenic tanks for liquefied gases

RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)

RD 10-249-98: Strength calculation norms for stationary boilers and steam and hot water pipelines.

RD 22-16-2005*: Guiding regulatory material. Hoisting machines. Selection of materials for the manufacture, repair and reconstruction of welded steel structures

RD 22-207-88: Lifting machines. General requirements and production standards

RD 26.260.15-2001: The leading document. Positive material identification of the main and welding materials and finished goods.

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 34.17.202: Instructions for automatic submerged-arc welding of low-carbon and low-alloy steel of 20 to 60 mm thickness using granulated filler metal

RD 39-30-574-81: Method for determining corrosivity and evaluating compatibility with corrosion inhibitors of chemicals used in oil production

RD 3-VEP: Guidance document on the use of axial bellows expansion joints (SC) for the technical conditions of the İNESH.300260.029TU, bellows compensating devices (SKU) for the technical conditions of the ЯІANSh.300260.033TU, starting bellows for the compensators (

RD 4-VEP: Guiding document on the use of axial bellows expansion joints (KSO-TPZ) for the technical specifications of TU 3-120-81 OAO Tula Cartridge Plant and starting bellows compensators (KSS-TPZ) for the technical specifications of TU 3695-056-08629358- 2000 OJS

RD 5-VEP: Guidance document on the use of axial bellows expansion joints of OJSC Metalomp in the design, construction and operation of heating networks according to technical specifications TU 5-99 NFCP.302667.310 TU (SK-160.000.00.TU) "Compensators bellows" SK-MK

RM 4-264-92: Automation systems. Recommendations for the design of steel structures for wiring and installation of automation equipment

RMD 56-05-2008 Sankt-Peterburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing

RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)

RTM 1652-9-89: Guide to engineering survey, assessment of the quality and reliability of building structures of buildings and structures

RTM 17-01-2002: Guiding technical materials on the design and use of steel-fiber-concrete building structures

RTM 26-07-129-72: Rubber-fluoroplastic diaphragms for general purpose pipe fittings. Design and dimensions

RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units

Safety Guide: Recommendations on arrangement and safe operation of process pipelines

Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products

SP 102.13330.2012: Hydraulic tunnels

SP 16.13330.2011: Steel structures

SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 294.1325800.2017: The construction of steel. Design rules

SP 346.1325800.2017: Systems of gas air treatments of boiler installations 150 Mw. Rules of design

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 362.1325800.2017: Fencing structures made of sandwich panels. Design rules

SP 373.1325800.2018: Independent heat supply sources. Design rules

SP 41-104-2000: Design of independent heat supply sources

SP 414.1325800.2018: Fixed formwork. Design rules

SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

ST RK 1643-2007: Freight cars cast iron brake shoes. Specification

ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods

ST RK 1818-2008: Ladders, step plates, and hand rails of freight cars. Specification. Put into effect in substitution of OST 24-050-67-87

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

ST RK 986-2003: Road transport. State registration number plates with a retroreflective surface for motor vehicles and their trailers. Technical specifications

ST RK 986-2012: Road vehicles. State registration licence plates of retroreflective surface for motor vehicles and their trailers, and blank plates. Specification. Put into effect in substitution of ST RK 986-2003

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 019-2012: Pipe fittings. Thermally expanded graphite based seals. General technical requirements

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 026-2005: Pipe fittings. Heat treatment of blanks from carbon and alloyed structural steels. Typical process

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 066-2008: Pipe fittings. Rubber-fluoroplastic diaphragms. Design, dimensions and specifications

ST TsKBA 070-2009: Pipe fittings. Symbol of materials in the design documentation

ST TsKBA 089-2010: Pipe fittings. Welding defects castings. Technical requirements

TR 182-08: Technical recommendations on scientific and technical support and monitoring of the construction of long-span, high-altitude and other unique buildings and structures

TR 94-2003: Crop loops of precast concrete and reinforced concrete structures, design, calculation and testing. Technical recommendations

TU 102-300-81: Weights prefabricated reinforced concrete covering type UBO

TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks

TU 102-377-84: A set of elements for mobile (inventory) collapsible buildings of the structural construction system SKZ-M. Group specifications

TU 102-541-89: Garage assembly individual use of ash and slag concrete

TU 102-84.3-87: Garage reinforced concrete prefabricated box with two floors for collective use

TU 112000-001-12586100-2009: Steel curved profiles for light steel structures. Technical conditions

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 3631-002-76457067-2012: Dynamic Pumps and Pump Units MST-TsN type and spare parts for them

TU 5216-001-05765820-2007: Roadside restraints for automobiles, side, first, metal type

TU 5216-020-00110604-03: Fences bridge, holding, for cars, side, first type, single-sided

TU 5216-055-00110604-2007: Fences, road, holding for cars of barrier type, road and bridge groups, one-sided and two-sided

TU 5216-063-01393697-2006: Road and bridge fences for automobiles, side, first type, metal

TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions

TU 6-14-95-2014: Clay Leukonate

TU 9462-001-53908805-2006: Glass syringe filling ampoules for medicines

VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank

VNTP 3-92: Temporary norms of technological designation of processing plants

VSN 176-78: Guidelines for the Design and Installation of Corrugated Metal Pipe Culverts

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $139.00
imgalt
Loads and impacts
Language: English
Price: $306.00
imgalt
High strength rolled steel. General specification
Language: English
Price: $289.00
imgalt
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.00
imgalt
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English
Price: $333.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!