GOST 520-2002

ГОСТ 520-2002

Rolling bearings. General specifications

Подшипники качения. Общие технические условия

Status: Not effective - Superseded. IUS 4-2012

The standard covers rolling bearings according to GOST 831, GOST 832, GOST 3478, GOST 4252, GOST 4657. GOST 5377, GOST 5721, GOST 6364, GOST 7242, GOST 7634, GOST 7872, GOST 8328, GOST 8338, GOST 8419, GOST 8545 , GOST 8882, GOST 8995, GOST 9942, GOST 18572, GOST 20531, GOST 23179, GOST 23526, GOST 24696, GOST 24850, GOST 27057, GOST 27365, GOST 28428. The standard does not apply to certain bearings of certain designs (for example, needle bearings with a stamped outer ring) and on bearings for special applications (for example, aircraft bearings and instrument precision dshipniki).

Стандарт распространяется на подшипники качения по ГОСТ 831, ГОСТ 832, ГОСТ 3478, ГОСТ 4252, ГОСТ 4657. ГОСТ 5377, ГОСТ 5721, ГОСТ 6364, ГОСТ 7242, ГОСТ 7634, ГОСТ 7872, ГОСТ 8328, ГОСТ 8338, ГОСТ 8419, ГОСТ 8545, ГОСТ 8882, ГОСТ 8995, ГОСТ 9942, ГОСТ 18572, ГОСТ 20531, ГОСТ 23179, ГОСТ 23526, ГОСТ 24696, ГОСТ 24850, ГОСТ 27057, ГОСТ 27365, ГОСТ 28428. Стандарт не распространяется на некоторые подшипники определенных конструктивных исполнений (например игольчатые подшипники со штампованным наружным кольцом) и на подшипники специальных видов применения (например самолетные подшипники и приборные прецизионные подшипники).

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 76

Approved: State Committee of the Russian Federation for Standardization and Metrology, 12/10/2002

SKU: RUSS20567

Price: $685.08




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 002/2011 TR TS. On safety of high-speed rail » Regulations and standards (to TR CU 002/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.100 bearings » 21.100.20 Rolling bearings »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.100 bearings » 21.100.20 Rolling bearings »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G16 Bearings »


The Document is Replaced With:

GOST 520-2011: Roll bearings. General specifications.

As a Replacement Of:

GOST 520-89: Rolling bearings. General specifications

The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 13014-80: Clamping sleeves of rolling bearings. Basic dimensions

GOST 14192-96: Cargo marking

GOST 16148-79: Wooden boxes for rolling bearings. Specifications

GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications

GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18572-81: Rolling bearings. Cylindrical roller bearings for railways axle boxes. Basic dimensions

GOST 18854-94: Rolling bearings. Static lood ratings

GOST 18855-94: Rolling bearings. Dinamic load ratings and rating life

GOST 20531-75: Combined needle taper roller bearings. Specifications

GOST 22696-77: Rolling bearings. Short cylindrical rollers. Technical requirements

GOST 23179-78: Rolling radial ball single row flexible bearings. Specifications

GOST 23526-79: Single direction thrust roller bearings with cylindrical rollers. Types and dimensions

GOST 24208-80: Tapered adapter sleeves of rolling bearings. Basic dimensions

GOST 24297-87: Input inspection of products. General provisions.

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 24696-81: Spherical double-row radial roller bearings with symmetrical rollers. Basic dimensions

GOST 24810-81: Rolling bearings. Clearances

GOST 24850-81: Ball bearings. Radial single row with two seals and wide inner ring and with spherical outer surface of outer ring. Boundary dimensions

GOST 24955-81: Rolling bearings. Terms and definitions

GOST 25255-82: Rolling bearings. Long cylindrical rollers. Technical requirements

GOST 25256-82: Rolling bearings. Tolerances. Terms and definitions

GOST 25455-82: Rolling bearings. Tapered and withdrawal sleeves. Technical requirements

GOST 27057-86: Single direction thrust tapered roller bearings. Basic dimensions

GOST 27365-87: Single row tempered roller bearings extra load ratings. Boundary dimensions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28428-90: Double-row spherical ball radial bearings. Specifications

GOST 2893-82: Rolling bearings. Grooves for locking spring rings. Locking shape rings. Dimensions

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3189-89: Ball and roller bearings. Identification code

GOST 3325-85: Rolling bearings. Tolerance margins and technical requirements for shaft and housing seatings. Fits

GOST 3395-89: Ball and roller bearings. Types and constructional varieties

GOST 3478-79: Rolling bearings. Basic dimensions

GOST 3722-81: Rolling bearings. Balls. Technical requirements

GOST 4252-75: Double-row angular ball bearings. Basic dimensions

GOST 4657-82: Single row radial needle-roller bearings. Basic dimensions. Technical requirements

GOST 515-77: Bitumized and tarred packaging paper

GOST 520-89: Rolling bearings. General specifications

GOST 5377-79: Cylindrical roller bearings with short rollers without inner or outer ring. Types and basic dimensions

GOST 5721-75: Spherical radial double row roller bearings. Types and boundary dimensions

GOST 6364-78: Double row tapered roller bearings. Basic dimensions

GOST 6870-81: Rolling bearings. Needle rollers. Specifications

GOST 7242-81: Single-row radial ball bearings with shields. Specifications

GOST 7634-75: Radial multiple row short cylindrical roller bearings. Types and boundary dimensions

GOST 7872-89: Single and double direction thrust ball bearings. Specification

GOST 831-75: Single-row angular ball bearings. Types and basic dimensions

GOST 832-78: Duplexed angular contact ball bearings. Types and boundary dimensions

GOST 8328-75: Radial short cylindrical roller bearings. Types and boundary dimensions

GOST 8338-75: Single row radial ball bearings. Boundary dimensions

GOST 8419-75: Four row tapered roller bearings. Boundary dimensions

GOST 8530-90: Rolling bearings. Locknuts, washers and cramps for tapered adaptive and withdrawal sleeves. Specifications

GOST 8545-75: Ball and roller bearings with tapered sleeves. Types and boundary dimensions

GOST 8882-75: Single row radial sealed ball bearings. Types and boundary dimensions. Technical requirements

GOST 8995-75: Single row angular contact ball bearings with one split inner ring. Types and boundary dimensions

GOST 9142-90: Boxes of corrugated board. General specifications

GOST 9592-75: Ball bearings with broad inner face. Specifications

GOST 9942-90: Spherical single thrust-radial roller bearings. Specifications

GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

GOST R ISO 2859-1-2007: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling schemes indexed by acceptance quality limit for lot-by-lot inspection

The Document is Referenced By:

GOST 10058-90: Single row radial ball instrument precision bearings. Technical specifications

GOST 18514-73: End caps for rolling bearing blocks. Technical requirements

GOST 18572-81: Rolling bearings. Cylindrical roller bearings for railways axle boxes. Basic dimensions

GOST 28428-90: Double-row spherical ball radial bearings. Specifications

GOST 28707-90: Rolling bearings. Separate shaped thrust collars. Specifications

GOST 29241-91: Rolling bearings. Single direction angular contact ball bearings with the contact angle 60°. Specifications

GOST 29242-91: Single row thrust short cylindrical roller bearings without rings. Specifications

GOST 3189-89: Ball and roller bearings. Identification code

GOST 32601-2013: Centrifugal pumps for petroleum, petrochemical and natural gas industries. General technical requirements

GOST 3478-79: Rolling bearings. Basic dimensions

GOST 4835-2006: Car wheelsets of 1520 mm gauge mainline railways. Specifications

GOST 4835-80: Car wheelsets of railways mainline, gauge 1520 (1524) mm. Specifications

GOST 520-2011: Roll bearings. General specifications.

GOST 831-75: Single-row angular ball bearings. Types and basic dimensions

GOST 832-78: Duplexed angular contact ball bearings. Types and boundary dimensions

GOST 8338-75: Single row radial ball bearings. Boundary dimensions

GOST 8419-75: Four row tapered roller bearings. Boundary dimensions

GOST 9942-90: Spherical single thrust-radial roller bearings. Specifications

GOST R 52545.1-2006: Rolling bearings. Measuring methods for vibration. Part 1. Fundamentals

GOST R 52859-2007: Rolling bearings. General specifications

GOST R 53830-2010: Vehicles. Hubs and the half-wheels. Technical requirements and test methods

NB ZhT TsV-TsL 014-2003: Axle rolling bearings for rolling stock of railways. Safety standards

SNiP III-G.10.8-65: Rolling mill equipment. Rules of production and acceptance of installation works

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!