FR 1.31.2006.02410
ФР 1.31.2006.02410
|
|
Quantitative chemical analysis of water. Methods for measuring mass concentrations of petroleum products and fats (with their joint presence) in samples of drinking, natural and treated wastewater using the method of IR spectrophotometry
Количественный химический анализ вод. Методика выполнения измерений массовых концентраций нефтепродуктов и жиров (при их совместном присутствии) в пробах питьевых, природных и очищенных сточных вод методом ИК-спектрофотометрии
Status: Not effective
The document establishes the infrared spectrophotometric method of quantitative chemical analysis of drinking samples, the concentration of petroleum products (NP) and fats (G) with their joint presence in the concentration range: NP - from 0.04 to 5.00 mg
Документ устанавливает ИК-спектрофотометрическую методику количественного химического анализа проб питьевых, концентрации нефтепродуктов (НП) и жиров (Ж) при их совместном присутствии в диапазоне концентраций: НП - от 0,04 до 5,00 мг/дм3, Ж - от 0,10 до 10,00 мг/дм3.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Industrial and Environmental Enterprise SIBEKOPRIBOR,
5/20/2004
SKU: RUSS205709
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
2 Protection and protection of surface water bodies »
2.2 Rationing impact on water bodies »
2.2.1 Rationing of quality of water bodies »
2.2.1.1 General requirements for composition and properties of surface waters »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.1 Basic requirements for testing laboratories and their activities »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.060 Water quality »
13.060.50 Examination of water to determine content of chemicals »
The Document References:
GOST 10727-91: Unidirectional glass threads. Specifications
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.019-79: Occupational safety standards system. Electric safety. General requirements and nomenclature of kinds of protection
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 20288-74: Reagents. Carbon tetrachloride. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 28498-90: Liquid-in-glass thermometers
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5556-81: Medical absorbent cotton
GOST 6709-72: Distilled water. Specifications
GOST 7328-2001: Weights. General specifications
GOST 8136-85: Active aluminum oxide
GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications
GOST R 51592-2000: Water. General requirements for sampling
GOST R 51593-2000: Drinking water. Sampling
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
