GOST 8032-84
ГОСТ 8032-84
|
|
Preferred numbers and series of preferred numbers
Предпочтительные числа и ряды предпочтительных чисел
Status: Effective
The standard establishes the preferred numbers and series of preferred numbers to be used when establishing gradations and individual values of parameters of technical objects (products, conditions of its existence, technological processes, etc.), as well as series of numbers (including those containing non-preferred numbers) used in cases where the use of rows of preferred numbers is impossible or impractical. The standard does not apply to the parameters of technical objects, the natural pattern of changes in the values of which differs from the laws of formation of series established by this standard.
Стандарт устанавливает предпочтительные числа и ряды предпочтительных чисел, которые должны применяться при установлении градаций и отдельных значений параметров технических объектов (продукции, условий ее существования, технологических процессов и др.), а также ряды чисел (в том числе содержащих непредпочтительные числа), применяемые в случаях, когда использование рядов предпочтительных чисел невозможно или нецелесообразно. Стандарт не распространяется на параметры технических объектов, естественная закономерность изменения значенийкоторых отличается от закономерностей образования рядов, установленных настоящим стандартом.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
8/9/1984
SKU: RUSS20576
The Product is Contained in the Following Classifiers:
ISO classifier »
07 MATHEMATICS. NATURAL SCIENCES »
07.020 Mathematics »
National standards »
07 MATHEMATICS. NATURAL SCIENCES »
07.020 Mathematics »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T1 Math »
T10 General Mathematics Questions »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Exact and natural sciences »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
General technical and metrological terms, designations and quantities »
As a Replacement Of:
GOST 26001-83: Relays start-protecting for electrical machines and appliances. Parametric range of currents
GOST 8032-56: Preferred numbers and series of preferred numbers
The Document is Referenced By:
GOST 10616-2015: Radial and axial fans. Dimensions and parameters
GOST 10616-90: Radial and axial fans
GOST 11442-74: Axial fans of general purpose
GOST 11442-90: General-purpose axial fans
GOST 12139-84: Electric rotary machines. Ranges of rated output, voltages and frequencies
GOST 12434-83: Low-voltage switching devices. General specifications
GOST 12445-80: Hydraulic and pneumatic drives and lubricating systems. Nominal pressures
GOST 12448-80: Hydraulic and pneumatic drives and lubricating systems. Nominal volumes
GOST 12893-2005: Single-seated, double-seated and cage control valves. General specifications
GOST 13045-81: Rota meters
GOST 13373-67: Actuating pneumatic diaphragm-spring straight motion mechanisms SSI. Types. Basic parameters and dimensions
GOST 13824-80: Positive-displacement hydraulic drives, pneumatic actuators and lubricating systems. Nominal capacity per revolution
GOST 13825-80: Hydraulic drives and lubricating systems. Nominal flows of liquid
GOST 14233-84: Supply transformers for domestic radio equipment. General specifications
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15880-83: Electric drills
GOST 15880-96: Electric drills. General specifications
GOST 16153-80: Monocrystalline germanium. Specifications
GOST 16308-84: Thermal current relays. General specifications
GOST 16552-86: Central conditioners. Series of rated capacities
GOST 16920-93: Manometric thermometers and temperature transducers
GOST 17335-79: Positive displacement pumps
GOST 17490-77: Injection lasers and radiators, laser diodes. Key parameters
GOST 18058-80: Three-phase asynchronous squirrel-cage submersible electric motors series ПЭД. Specifications
GOST 18098-94: Jig-boring and jig-grinding machines. Standards of accuracy
GOST 18200-79: Three-phase synchronous motors with power rating 110 kW and above. General specifications
GOST 18200-90: Above 200 kW rotating electric machines. Synchronous engines. General specifications
GOST 18599-2001: Polyethylene pressure pipes. Specifications
GOST 20073-81: General-purpose stationary air piston compressors. Acceptance rules and methods of tests
GOST 20766-75: Ionizing radiation semiconductor spectrometer detectors. Types and basic parameters
GOST 20859.1-89: Power semiconductor devices
GOST 2185-66: Spur gears. Basic parameters
GOST 23366-78: Series of rated voltages of direct and alternating current
GOST 23644-79: Gaseous nitrogen concentrated by stable isotope Nitrogen-15. Specifications
GOST 24104-2001: Laboratory scales. General technical requirements
GOST 24104-88: General purpose and reference laboratory balances
GOST 24303-80: Kitchen cookware, made of the ferrous and nonferrous metals
GOST 24386-91: Driving and driven machines. Shaft heights
GOST 24834-81: Basic norms of interchangeability. Metric screw thread. Transition fits
GOST 24848.1-81: Variator V-belts for industrial equipment. Basic sizes and methods of control
GOST 24934-81: Vacuum equipment. Fixed screw flanges. Basic and allied dimensions
GOST 24935-81: Vacuum equipment. Turning screw flanges. Basic and allied dimensions
GOST 25178-82: Electric hand driers
GOST 25197-82: Vacuum equipment. Direct and angle vacuum valves. Mounting dimensions
GOST 25301-95: Cylindrical reducing gears. Parameters
GOST 26.004-85: System means of measurement and automation. Range of the main technical parameters
GOST 26.013-81: Measurement and automation means. Input and output electrical signals with discrete change of parameters
GOST 26044-83: Vibrating. Equipment for operational monitoring of vibration state of power hydroturbine units.
GOST 26050-89: Industrial robots
GOST 26278-84: Charged-particle accelerators for industry applications. Types and basic parameters
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 26379-84: Wide V-belts for variable-speed drives of agricultural machines. Specifications
GOST 26526-85: Vacuum equipment. Flanger joint for high vacuum system. Design, dimensions and technical requirements
GOST 27142-97: Bevel and bevel-cylindrical reducing gears. Parameters
GOST 27307-2013: Explosion-proof mine low-voltage complete control devices to 1140 V. Technical requirements and test methods
GOST 27350-87: Industrial aggregate-module robots. Acting angular linear modules. Types, main parameters
GOST 27387-87: Industrial robots for contact spot welding. Basic parameters and dimensions
GOST 27776-88: Arc welding and plasma-arc treatment flexible manufacturing modules. Basic parameters
GOST 28099-89: General-purpose agricultural loaders. Types and basic parameters
GOST 28173-89: Rotating electrical machines. Rating and performance
GOST 28331-89: Industrial aggregate-module robots. Acting modules. Connecting dimensions
GOST 28395-89: Industrial aggregate-module robots. Foundations. Types
GOST 28585-90: Metal forming machines. Automation means. Rows of main parameters
GOST 28723-90: Velocity, electromagnetic and vortex flow meters
GOST 28836-90: Resistive strain-gauge
GOST 28884-90: Preferred number series for resistors and capacitors
GOST 29256-91: Textile machinery and accessories. Cylindrical tubes. Dimensions
GOST 29281-92: Shipboard machines and foundations. Mounting dimensions
GOST 29324-92: Thermoplastics pipes for the transport of fluids. Nominal outside diameters and nominal pressures
GOST 30124-94: Weight meters and weighing batchers of continuous action
GOST 30137-95: Horizontal jigging conveyers. General specifications
GOST 30195-94: Submersible asynchronous electric motors
GOST 30214-94: Dental rotary instruments. Nominal sizes and designation
GOST 30295-96: Welding positioners. Types, basic parameters and dimensions
GOST 30528-97: Ventilation systems. Air filters. Types and basic parameters
GOST 30685-2000: Honing and lapping vertical machines. General specifications
GOST 31294-2005: Direct-acting safety valves. General specifications
GOST 31550-2012: Pile driving hammers. Specifications
GOST 32415-2013: Pressure thermoplastic pipes and their fittings for water supply and heating systems. General specifications
GOST 33798.4-2016: Electric equipment of a railway rolling stock. Part 4. A.c. circuit-breakers. General specifications
GOST 34288-2017: Pipeline valves. Butterfly valves of thermoplastics materials. General specifications
GOST 34289-2017: Pipeline valves. Gate valves of thermoplastics materials. General specifications
GOST 34290-2017: Pipeline valves. Diaphragm valves of thermoplastics materials. General specifications
GOST 34291-2017: Pipeline valves. Check valves of thermoplastics materials. General specifications
GOST 34292-2017: Pipeline valves. Ball valves of thermoplastics materials. General specifications
GOST 4.477-87: Product-quality index system. Charged-particle accelerators for industrial application. Index nomenclature
GOST 4608-81: Basic norms of interchangeability. Metric screw thread. Interference fits
GOST 5746-2003: Passenger lifts. Basic parameters and dimensions
GOST 5746-2015: Passenger lifts. Basic parameters and dimensions
GOST 5761-2005: Valves for nominal pressure at most PN 250. General specifications
GOST 5813-2015: Fan v-belts and pulleys for engines of cars, tractors and combines. Requirements and test methods
GOST 5976-73: Centrifugal fans, general purpose
GOST 6636-69: Standard linear dimensions
GOST 7164-78: SSI self-balancing servoinstruments. General specifications
GOST 7402-84: Electric fans for domestic use
GOST 8.092-73: State system for ensuring the uniformity of measurements. Pressure gauges, vacuum pressure gauges, vacuum manometers, draught gauges, delivery head meters and draught head gauges with unified electric (current) output signals. Methods and means of verification
GOST 8682-93: Laboratory glassware. Interchangeable conical ground V-joints
GOST 8823-2018: Goods lifts. Basic parameters and dimensions
GOST 8824-2018: Small freight elevators. Key parameters and dimensions
GOST 9219-88: Traction electrical devices
GOST 9726-89: Vertical milling machines with compound table. Terminology. Basic dimensions. Standards of accuracy and rigidity
GOST IEC 60269-1-2016: Low-voltage fuses. Part 1. General requirements
GOST IEC 60269-4-2016: Low-voltage fuses. Part 4. Supplementary requirements for fuse-links for the protection semiconductor deviсes
GOST IEC 60269-6-2013: Low-voltage fuses. Part 6. Supplementary requirements for fuse-links for the protection of solar photovoltaic energy system
GOST IEC 60601-2-45-2011: Medical electrical equipment. Part 2-45. Particular requirements for safety of mammographic X-ray equipment and mammographic stereotactic devices
GOST IEC 60947-7-3-2016: Low-voltage switchgear and controlgear. Part 7-3. Ancillary equipment. Safety requirements for fuse terminal blocks
GOST ISO 12162-2006: Thermoplastics materials for pipes and fittings for pressure applications. Classification and designation. Overall service coefficient
GOST ISO 12162-2017: Thermoplastic materials for pressure pipes and fittings. Classification, designation and safety factor
GOST ISO 161-1-2004: Thermoplastics pipes for the conveyance of fluids. Nominal outside diameters and nominal pressures. Metric series
GOST ISO 161-1-2019: Thermoplastics pipes for transporting liquid and gaseous media. Nominal outside diameters and nominal pressures. Part 1. Metric Series
GOST ISO 4065-2005: Thermoplastics pipes. Universal wall thickness table
GOST ISO 4065-2019: Thermoplastics pipes. Universal wall thickness table
GOST R 50026-92: Turning tools with carbide tips. Types and dimensions
GOST R 50030.7.3-2009: Low-voltage switchgear and control gear. Part 7.3. Ancillary equipment. Safety requirements for fuse terminal blocks
GOST R 50139-92: Processing equipment. General specifications
GOST R 50222-92: Laboratory glassware. Interchangeable conical ground
GOST R 50339.0-2003: Low-voltage fuses. Part 1. General requirements
GOST R 50339.0-92: Low-voltage fuses. General requirements
GOST R 50349-92: Dental rotary instruments. Nominal sizes and designation
GOST R 50538-93: Miniature fuses. Cartridge fuse-links
GOST R 50641-94: Grooved pulleys for classical and narrow V-belts. System based on datum width
GOST R 50838-2009: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50838-95: Polyethylene pipes for the supply of gaseous fuel. Specifications
GOST R 50959-96: Samovars (hot water boilers), using hard fuel. Specifications
GOST R 51041-97: Pile driving hammers. Specifications
GOST R 51613-2000: Pressure pipes made of unplasticized polyvinylchloride. Specifications
GOST R 52134-2003: Pressure thermoplastic pipes and their jointing elements for water-supply and heating systems. General specifications
GOST R 52779-2007: Polyethylene fittings for gas pipelines. General specifications
GOST R 52856-2007: Vacuum equipment. Flange dimensions
GOST R 52912-2008: Nominal diameters of components of vacuum systems. Series
GOST R 53440-2009: Basic norms of interchangeability. Geometrical product specifications. Standard rates of taper and cone angles
GOST R 53466-2009: Optics and optical equipment. Medical thermographs. General technical requirements. Methods of measuring the major parameters
GOST R 53471-2009: Synchronous three-phase generators of power above 100 kW. General specifications
GOST R 53770-2010: Passenger lifts. Basic parameters and dimensions
GOST R 53771-2010: Goods lifts. Basic parameters and dimensions
GOST R 55882.4-2013: Electric equipment of a railway rolling stock. Part 4. A.c. circuit-breakers. General specifications
GOST R 56927-2016: Pipes made of oriented unplasticized polyvinylchloride for water supply. Specifications
GOST R 58121.1-2018: Plastic pipings for the supply of gaseous fuels. Polyethylene (PE). Part 1. General
GOST R 70628.1-2023: Plastic pipelines for water supply, drainage and pressure sewerage. Polyethylene (PE). Part 1. General requirements
GOST R 70701-2023: Hydraulic actuators displacement, pneumatic actuators and lubrication systems. Pressure ratings
GOST R IEC 60317-0-9-2017: Specifications for particular types of winding wires. Part 0-9. General requirements. Enamelled rectangular aluminium wire
IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory
OSN-APK 2.10.06.001-04: Instructions for the installation of plastic pipelines at the objects of the agroindustrial complex of Russia
OST 26-07-2068-86: Pipeline fittings. Pneumatic and hydraulic drives. Main parameters.
R 50-54-103-88: Recommendations. Modular and basic product designs. Main provisions
RD 31.00.87-85: Specifications. Rules of construction, presentation and design. The procedure for approval, approval and registration
RD 50-632-87: Guidelines. Unification of products. Construction of parametric and standard series of parts and assembly units of general engineering application
RU 34-1203-71: Guidelines for the design of dust and air ducts of boiler units
SP 344.1325800.2017: The water supply and heating interior buildings systems cross-linked polyethylene pipes. The rules of design and installation
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
ST RK IEC 60077-5-2007: Rolling stock of railways; electrical equipment for rolling stock. Part 5. Electrical components. Requirements for High Voltage Fuses
STA 25.03.009-2004: Means of alarm, fire and alarm-fire systems. General technical requirements and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
