GOST R 52392-2005
ГОСТ Р 52392-2005
|
|
Brake cylinders for railway rolling stock. General specifications
Цилиндры тормозные железнодорожного подвижного состава. Общие технические условия
Status: Not effective - Canceled. Information about the registration of 87-st from 06/01/2010 (the official website of Rosstandart); IUS 11-2010
Brake cylinders for railway rolling stock. General specifications
Тормозные цилиндры для железнодорожного подвижного состава. Основные Характеристики
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/15/2005
SKU: RUSS20623
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D56 Automatic coupling and brake equipment »
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 11427-75: Blacksmith's hand and hammer tools. Round split swages. Design and dimensions
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 1412-85: Flakish graphite cast iron
GOST 14192-96: Cargo marking
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 2.106-96: Unified system for design documentation. Text documents
GOST 2.427-75: Unified system for design documentation. Rules for making working drawings of sprockets for round-link chain wheels
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24297-87: Input inspection of products. General provisions.
GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.
GOST 28166-89: Monogerm sugar beet seeds. Requirements for state purchases
GOST 28498-90: Liquid-in-glass thermometers
GOST 30467-97: Design devices and the accessories of rolling stock breaks equipment. General requirements of safety
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7462-73: Enamels НЦ-5123. Specifications
GOST 8427-75: Longitudinally turning automatic machines. Basic dimensions
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9736-91: Electric apparatus of direct transformation for measuring non -electric values. General technical requirements and test methods
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.016-94: National Measurement Standards. Requirements for Calibration Procedures
The Document is Referenced By:
GOST 31402-2009: Brake cylinders for railway rolling stock. General specifications
GOST 5973-2009: Dump cars for 1520 mm railway gauge. General specifications
NB ZhT TsT-TsV 021-2000: Brake cylinders of rolling stock of railways. Safety standards
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.