PB 10-611-03
ПБ 10-611-03
|
|
Installation and safe operation of hoists (towers)
Правила устройства и безопасной эксплуатации подъемников (вышек)
Status: Not effective - Not applicable. By order of Rostekhnadzor dated November 12, 2013 No. 533, the resolution approving this document is not subject to application
The rules apply to the following lifts: 1) self-propelled, including automobile; on special chassis; tracked; railway; pneumowheel; 2) trailed; 3) mobile; 4) mast type on a special chassis, including self-propelled, trailed, mobile. The rules do not apply to the following lifts: 1) fire lifts; 2) construction cargo lifts; 3) passenger-and-freight lifts; 4) front; 5) scaffolding (scaffolding, scaffolding, platforms, towers).
Правила распространяются на следующие подъемники: 1) самоходные, в том числе автомобильные; на спецшасси; гусеничные; железнодорожные; пневмоколесные; 2) прицепные; 3) передвижные; 4) мачтового типа на специальном шасси, в том числе самоходные, прицепные, передвижные. Правила не распространяются на следующие подъемники: 1) пожарные подъемники; 2) строительные грузовые подъемники; 3) грузопассажирские подъемники; 4) фасадные; 5) средства подмащивания (леса, подмости, площадки, вышки).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosgortekhnadzor of Russia,
6/11/2003
SKU: RUSS20664
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Regulatory documents of Gosgortekhnadzor »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Technical Supervision »
Section I. Technological, construction, energy supervision and environmental protection regarding limitation of negative anthropogenic impact »
IV. Regulatory legal acts and regulations »
2. Industrial safety »
2.13. Lifting facilities »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
2 Special industrial safety requirements for operation of a hazardous production facility »
2.7 Industrial safety requirements for hoisting facilities »
ISO classifier »
53 LIFTING AND TRANSPORT EQUIPMENT »
53.020 Lifting equipment »
53.020.20 Cranes »
The Document is Replaced With:
Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"
Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
As a Replacement Of:
PB 10-256-98: Regulations on design and safe operation of hoists (derricks)
The Document References:
Federal Law 181-FZ: Fundamentals of Occupational Safety and Health in the Russian Federation
The Document is Referenced By:
GOST R 18.12.01-2015: Technology of the aviation fuelling. Functional and technological parameters of airfield fuelling tankers (tankers). Customer requirements
GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements
GOST R 53037-2008: Mobile elevating work platforms. Design calculations, safety requirements, tests
GOST R 53984-2010: Mobile elevating work platforms. Safety principles and inspection of technical operational state
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MDS 12-26.2006: Methodological manual for the examination of knowledge of labor protection requirements by executives and specialists of construction organizations
MDS 12-27.2006: Methodological manual for conducting labor protection training for executives and specialists of construction organizations
MDS 12-28.2006: Methodological guide for the expert assessment of the safety of non-stationary jobs at construction sites
MDS 12-35.2007: Methodological manual for the development of administrative and regulatory documentation of the labor protection management system of a construction organization
MDS 12-49.2009: Layouts of labor protection instructions for construction workers. Toolkit
MDS 12-53.2010: Layouts of administrative and regulatory documents of the labor protection management system of a construction organization. Toolkit
Order 1155: Model program on the course "Industrial, Environmental, Energy Safety, Safety of Hydraulic Structures" for pre-certification (pre-examination) training of managers and specialists of organizations supervised by the Federal Service for Environmental, Technological and Nuclear Supervision.
Order 533: Federal norms and rules in the field of industrial safety "Safety rules for hazardous production facilities where lifting structures are used"
Order 533: On the approval of federal norms and rules in the field of industrial safety "General explosion safety rules for explosive and fire hazardous chemical, petrochemical and oil refining industries"
PB 06-317-99: Uniform safety rules for crushing, sorting, mineral processing and sintering of ores and concentrates
POT R O-45-005-95: Occupational Safety and Health Requirements for Work on Cable Communications Lines and Closed-Circuit Radio Broadcasting (Installation of Closed-Circuit Radio Networks)
POT R O-45-009-2003: Rules for labor protection when working on linear structures of cable transmission lines
RD 10-107-96: Standard manual for strappers on works safety performance by cargo hoisting ma-chines
RD 10-112-1-04: Recommendations for expert examination of lifting machines. General provisions
RD 10-112-96: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 1: General Provisions
RD 10-198-98: Standard Safety Guidelines for Personnel Working from an Aerial Lift (Vertical Tower) Basket
RD 10-199-98: Standard manual for safe operation for hoisters (towers) operators
RD 10-332-99: Standard instructions for persons responsible for the safe execution of work with hoists
RD 10-40-93: Standard manual for engineering and technical personnel to oversee safe operation of lifting equipment
RD 11-06-2007: Guidelines on development procedure for work execution program and schedule for hoisting machines and loading-unloading operations process chart.
RD 36-62-00: Hoisting equipment. General technical requirements.
RD RosJeK 10-PV-02: Rules for the design, construction and manufacture of hoists (towers)
RD SMA-004-04: Standard instructions for specialists in the operational support of safety devices for lifting machines
RD SMA-006-07: Model program and methods of performance tests (surveys) of safety devices of lifting machines
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
TI 36-22-20-03: Standard manual for persons responsible for safety of hoisters
TI 36-22-21-03: Standard manual for safe operation for hoisters (towers) operators
TI 36-22-22-03: Standard instructions for the safe conduct of work for workers cradles that are on a lift (tower)
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.