OST 108.004.10-86
ОСТ 108.004.10-86
|
|
Quality control program of nuclear energetics products.
Программа контроля качества изделий атомной энергетики.
Status: It is excluded from the register, index, list. Order of Rosenergoatom Concern JSC No. 9
The standard establishes uniform methods for performing control (tests, measurements), the scope of control (tests, measurements), requirements for control results (tests, measurements) in the manufacture (final production, installation) of AS equipment and other nuclear facilities and requirements for recording control results (tests) or recording the execution of control on the operation. The standard applies to products, assembly units and parts of equipment and pipelines for nuclear power plants subject to the Rules for the Construction and Safe Operation of Equipment and Pipelines of Nuclear Power Plants (PNAE G-7-008-89)
Стандарт устанавливает единые методики выполнения контроля (испытаний, измерений), объем контроля (испытаний, измерений), требования к результатам контроля (испытания, измерений) при изготовлении (доизготовлении, монтаже) оборудования АС и других ЯУ и требования к регистрации результатов контроля (испытаний) или регистрации выполнения контроля по данной операции. Стандарт распространяется на изделия, сборочные единицы и детали оборудования и трубопроводов для атомных энергетических установок, подпадающих под действие "Правил устройства и безопасной эксплуатации оборудования и трубопроводов атомных энергетических установок" (ПНАЭ Г-7-008-89)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Service for Ecological, Technological and Nuclear Supervision,
10/9/2006
SKU: RUSS20726
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Industry Standards and Specifications »
Industry standards »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.01 Nuclear power engineering in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T51 Documentation system that determines indicators of quality, reliability and durability of products »
National Standards for OKSTU »
NUCLEAR TECHNOLOGY »
Control methods (testing, analysis, measurements) »
The Document References:
GOST 10006-80: Metal pipes
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications
GOST 11706-78: Tubes. Method the tensile test of ring by cone
GOST 11878-66: Austenitic steel bars. Methods for the determination of the ferrite-phase
GOST 12119.0-98: Electrical steel. Methods of test for magnetic and electrical properties. General requirements
GOST 12119.1-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of magnetic induction and coercivity in Epstein apparatus and on ring-shaped specimens in magnetostatic field
GOST 12119.2-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of magnetic induction in permeameter
GOST 12119.3-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of coercivity in broken magnetic circuit
GOST 12119.4-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of specific magnetic losses and actual value of magnetic field intensity
GOST 12119.5-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of magnetic induction amplitudes and magnetic field intensity
GOST 12119.6-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of relative magnetic permeability and specific magnetic losses by a.c. bridge
GOST 12119.7-98: Electrical steel. Methods of test for magnetic and electrical properties. Method for measurement of specific electric resistance by d.c. bridge
GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon
GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination
GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination
GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus
GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination
GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten
GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination
GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel
GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination
GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum
GOST 12355-78: Alloyed and high-alloyed steels. Methods of copper determination
GOST 12356-81: Steels alloyed and highalloyed. Methods of the determination of titanium
GOST 12357-84: Steels alloyed and highalloyed. Methods for the, determination of aluminium
GOST 12358-2002: Alloyed and highalloyed steels. Methods for determination of arsenic
GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen
GOST 12360-82: Steels alloyed and highalloyed. Methods for the determination of boron
GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium
GOST 12362-79: Alloy and high-alloy steels. Methods for determination of stibium, lead, tin, zinc and cadmium
GOST 12363-79: Steels alloyed and highalloyed. Methods for the determination of selenium
GOST 12364-84: Steels alloyed and highalloyed. Methods for the determination of cetium
GOST 12365-84: Steels alloyed and highalloyed. Methods for the determination of zirconium
GOST 14019-2003: Metallic materials. Bend test method
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 1497-84: Metals. Methods of tension test
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17051-82: Alloyed and high-alloyed steels. Methods for determination of tantalum
GOST 17410-78: Non-destructive testing of seamless cylindrical metal pipes and tubes. Methods of ultrasonic imperfection detection.
GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 18895-97: Steel. Method of photoelectric spectral analysis
GOST 19040-81: Metal tubes. Method of tension test at high temperatures
GOST 2.102-68: Types and complete set of design documents
GOST 2.104-2006: Unified system for design documentation. Basic inscriptions.
GOST 2.104-68: Unified system for design documentation. Basic inscriptions
GOST 2.105-95: General requirements for writing documents
GOST 2.301-68: Unified system for design documentation. Formats
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 20426-82: Radiation methods of defectoscopy
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 2246-70: Welding steel wire. Specifications
GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis
GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium
GOST 22536.11-87: Carbon steel and unalloyed cast iron. Methods for determination of titanium
GOST 22536.12-88: Carbon steel and unalloyed cast iron. Methods for determination of vanadium
GOST 22536.14-88: Carbon steel and unalloyed cast iron. Methods for determination of zirconium
GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite
GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur
GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus
GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon
GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese
GOST 22536.6-88: Carbon steel and unalloyed cast iron. Methods for determination of arsenic
GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium
GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper
GOST 22536.9-88: Carbon steel and unalloyed cast iron. Methods for determination of nickel
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 22761-77: Metals and alloys. Brinell hardness test by static action portable hardness meters
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage
GOST 24289-80: Eddy current non-destructive testing. Terms and definitions
GOST 24297-87: Input inspection of products. General provisions.
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 26364-90: Ferritometers for austenitic steels. General specifications
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 27947-88: Non-destructive testing. Tv radiographic method. General requirements
GOST 28033-89: Steel. Method of X-ray-fluorescent analysis
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid
GOST 3.1502-85: Unified system for technological documentation. Forms and rules of making documents on technical control
GOST 3565-80: Metals. Method for torsional test
GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size
GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7122-81: Weld seams and all-weld metal. Methods of sample selection for determination of chemical composition
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
GOST 8.377-80: State system for ensuring the uniformity of measurements. Soft-magnetic materials. Methods of determination of static magnetic characteristics
GOST 8694-75: Tubing (pipes). Expansion testing method
GOST 8695-75: Tubing (pipes). Flattening testing method
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.028-74: Unified system of corrosion and ageing protection. Interoperational anticorrosive protection of billets, parts and assemblies of metal products. General requirements
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9249-59: Normal temperature
GOST 9378-93: Roughness comparison specimens
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9651-84: Metals. Methods of tension tests at elevated temperatures
GOST R 52029-2003: Water. Unit of hardness
PNAE G-10-031-92: Basic provisions for localizing safety system elements welding on nuclear stations
PNAE G-10-032-92: Requirements for welding seal element control of nuclear plant confining safety systems
PNAE G-7-003-87: Certification Requirements for Welders of Equipment and Piping for Nuclear Power Plants
PNAE G-7-009-89: Equipment and pipelines of nuclear power installations. Welding and overlaying, general provisions
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-014-89: Standardized methods of testing of basic materials (semifinished products, weld joints and surfacing of equipment and piping of npp. Ultrasonic inspection. Part I. Control of basic materials (semifinished products)
PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection
PNAE G-7-017-89: Unified technique of inspection of base materials (semifinished products), welded joints and deposits of equipment and pipelines of atomic power plants. Ultrasonic inspection
PNAE G-7-019-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Leak tightness control. Gas and liquid methods
PNAE G-7-022-90: Equipment and pipelines of nuclear power units. Arc welding of aluminium alloys in protective gases. Main provisions
PNAE G-7-023-90: Equipment and pipelines of nuclear power units. Welded joints of aluminium alloys. Control rules
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination
PNAE G-7-031-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part III. Thickness measurement of monometals, metals and corrosion resistant coat
PNAE G-7-032-91: Uniform control methods for basic materials (semi-finished materials), welded joints and weldings on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part IV. Examination of welded joints of austenitic steels
PNAJe G-7-002-86: Standards for calculating the strength of equipment and pipelines of nuclear power plants
PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
R 50-65-88: Recommendations. Unified system of technological documentation. The procedure for registration of the registration card of test results
RB 089-14: Safety guide on nuclear energy use. Unified control procedures of base materials (semi-products), weld joints and build-ups of equipment and pipelines of nuclear energy plants. Visual and measuring testing.
RB-090-14: Safety guide on nuclear energy use
RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications
RD 3-3-85: Model provision of procedure examination rules, regulations and safety instructions in the nuclear industry managing directors and professionals.
RD EO 0505-03: Instructions for metal styloscope
The Document is Referenced By:
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
STO 1.1.1.01.0069-2017:
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
United power system and isolated power systems. Operative-dispatch management. Frequency control and control of active power. Norms and requirements
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
