SP 16.13330.2011
СП 16.13330.2011
|
|
Steel structures
Стальные конструкции
Status: Superseded in part. Recognized not to be applied by order of the Ministry of Construction of Russia No. 126
The rules should be observed in the design of steel building structures of buildings and structures for various purposes, operating at temperatures not higher than 100 degrees Celsius and not less than minus 60 degrees Celsius.
Правила следует соблюдать при проектировании стальных строительных конструкций зданий и сооружений различного назначения, работающих при температуре не выше 100 градусов Цельсия и не ниже минус 60 градусов Цельсия.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
12/27/2010
SKU: RUSS20769
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.100 Power stations in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
The Document is Replaced With:
SP 16.13330.2017: Steel structures
As a Replacement Of:
SP 16.13330.2010: Steel structures
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Federal Law 184-FZ: About technical regulation
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10605-94: Hexagon nuts with thread diameter over 48 mm. Product grade B. Specifications
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10906-78: Square taper washers. Specifications
GOST 11371-78: Washers. Specifications
GOST 11474-76: Bent-steel sections. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14954-80: Two lay rope type ЛK-P construction 6x19(1+6+6/6)+7x7(1+6). Dimensions
GOST 1497-84: Metals. Methods of tension test
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18123-82: Washers
GOST 18126-94: Bolts and nuts with thread diameter over 48 mm. General specifications
GOST 18901-73: Steel wire ropes. Locked conveying wire rope with two layers of Z-wire and type TK core. Dimensions
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19425-74: Special-purpose steel I-beams and channels. Dimensions
GOST 21437-95: Zinc antifriction alloys. Marks, technical requirements and test methods
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 2246-70: Welding steel wire. Specifications
GOST 22727-88: Rolled sheet. Ultrasonic test methods
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 24379.0-80: Foundation bolts. General specification
GOST 24379.1-80: Foundation bolts. Structure and dimensions
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24839-81: Structural steelwork. Lay-out of holes in rolled shapes. Dimensions
GOST 25546-82: Hoisting cranes. Work conditions
GOST 2601-84: Welding of metals. Terms and definitions of basic concepts
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 28548-90: Steel tubes. Terms and definitions
GOST 28870-90: Steel. Methods tensile tests of rolled thick-plates in the thickness direction
GOST 30245-2003: Steel bent closed welded square and rectangular section for building constructions. Specifications
GOST 3062-80: One lay rope type ЛК-О construction 1x7 (1+6). Dimensions
GOST 3063-80: One lay rope type ТК construction 1x19 (1+6+12). Dimensions
GOST 3064-80: One lay rope type ТК construction 1x37 (1+6+12+18). Dimensions
GOST 3066-80: Two lay rope type ЛК-О construction 6x7 (1+6)+1x7 (1+6). Dimensions
GOST 3067-88: Two lay steel rope type ТК construction 6x19 (1+6+12)+1x19 (1+6+12). Dimensions
GOST 3068-88: Two lay steel rope type ТК construction 6x37 (1+6+12+18)+1x37 (1+6+12+18). Dimensions
GOST 3081-80: Two lay rope type LK-O construction 6x19(1+9+9)+7x7(1+6). Dimensions
GOST 3090-73: Steel wire ropes. Locked conveying wire rope with one layer of Z-wire and type ТК cope. Dimensions
GOST 380-2005: Common quality carbon steel. Grades
GOST 380-94: Normal quality carbon steel
GOST 3822-79: Bimetallic steel-copper wire
GOST 4.253-80: Product-quality index system. Beilding. Steel structures. Nomenclature of indixes
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 5927-70: Hexagon nuts (high precision). Construction and dimensions
GOST 6402-70: Lock washers. Specifications
GOST 7268-82: Steel. Method for determination of ability to mechanical aging by impact bend testing
GOST 7372-79: Steel wire for ropes
GOST 7669-80: Two lay rope type ЛК-РО construction 6x36(1+7+7/7+14)+7x7(1+6). Dimensions
GOST 7675-73: Steel wire ropes. Locked conveying wire rope with one layer of V-shaped wire, one layer of Z-wire and type ТК cope. Dimensions
GOST 7676-73: Steel wire ropes. Locked conveying wire rope with two layers of V-shaped wire, one layer of Z-wire and type TK core. Dimensions
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 7805-70: Hexagon bolts, product grade A. Construction and dimensions
GOST 8050-85: Carbon dioxide,
GOST 839-80: Uninsulated cables for aerial power
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9087-81: Welding melted fluxes
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R ISO 17659-2009: Welding. Multilingual terms for welded joints
GOST R ISO 4759-3-2009: Tolerances for fasteners – Part 3: plain washers for bolts, screws and nuts – product grades A and C
GOST R ISO 857-1-2009: Welding and allied processes. Vocabulary. Part 1. Metal welding processes. Terms and definitions
GOST R ISO 898-1-2011: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 1. Bolts, screws and studs of specified property classes with coarse thread and fine pitch thread
GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.09.03-85: Structures for industrial installations
SNiP 3.03.01-87: Bearing and enclosing structures
SP 131.13330.2012: Building climatology
SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)
SP 20.13330.2011: Loads and impacts
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 43.13330.2012: Structures for industrial installations
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
GOST 23118-2012: Building steel structures. General specifications
GOST 23120-2016: Stairways, marching, platforms and fences of steel. Specification
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 33329-2015: Acoustical barriers for railway transport. Technical requirements
GOST 33807-2016: Safety of attractions. General requirements
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 52044-2003: Outer advertisement allocated alongside of highways and in territories of cities, towns and villages. General technical requirements concerning means of outer advertisement. Rules of allocation
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 53681-2009: Flare parts for general refinery and petrochemical service. General technical requirements
GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition
GOST R 54931-2012: Acoustical barriers for railway transport. Technical requirements
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
GOST R 56567-2015: Adjustable pallet racking systems. Design code
GOST R 56828.34-2017: Best available techniques. Resource conservation. Methodology of management decisions for conservation of aquatic bioresources and their habitats
GOST R 56944-2016: Cranes. Overhead crane railway. General specifications
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
GOST R 57555-2017: Petroleum and natural gas industry. Offshore oil and gas field structures. Topsides structure
GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications
GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design
GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes
ODM 218.4.027-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Metal and steel-reinforced concrete structures
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 102.13330.2012: Hydraulic tunnels
SP 107.13330.2012: Greenhouses and hotbeds
SP 108.13330.2012: Plants, buildings and constructions of storage and grain processing
SP 120.13330.2012: Subway systems
SP 122.13330.2012: Railway and highway tunnels
SP 128.13330.2012: Aluminium structures
SP 128.13330.2016: Aluminium structures
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2017: Steel structures
SP 17.13330.2011: Roofs
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2016: Soil bases of buildings and structures
SP 225.1326000.2014: Station buildings, structures and devices
SP 248.1325800.2016: Underground structures. Design rules
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 27.13330.2011: Concrete and Reinforced Concrete Structures intended for the Service in Elevated and High Temperatures
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 285.1325800.2016: Football stadiums. Desing rules
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 299.1325800.2017: Ventilation systems of highway tunnels. Design rules
SP 303.1325800.2017: One-story industrial buildings. Operating rules
SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules
SP 33.13330.2012: Steel pipelines strength analysis
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 350.1326000.2018: Norms for technological design of sea ports
SP 36.13330.2012: Trunk pipelines
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 43.13330.2012: Structures for industrial installations
SP 45.13330.2017: Earthworks, grounds and footings
SP 52-110-2009: Concrete and reinforced concrete structures subjected to technological high and high temperatures
SP 52-117-2008*: Reinforced concrete spatial structures of coatings and floors. Part I. Calculation methods and design
SP 54.13330.2016: Multicompartment residential buildings
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 64.13330.2011: Wooden structures.
SP 64.13330.2017: Timber structures
SP 69.13330.2016: Underground excavations
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 83.13330.2016: Industrial furnaces and brick chimneys
SP 85.13330.2016: Overhead contact lines of electrified transport
SP 86.13330.2012: Main pipelines
SP 86.13330.2014: Main (Trunk) pipelines
SP 88.13330.2014: The protective shelters of civil defense
SP 91.13330.2012: Underground mine workings
SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants
SP 98.13330.2012: Tram and trolleybus lines
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.