imgalt

GOST 10692-80

ГОСТ 10692-80

Steel and cast iron pipes and fittings. Rules for acceptance of marking, packing, transportation and storage

Трубы стальные, чугунные и соединительные части к ним. Приемка, маркировка, упаковка, транспортирование и хранение

Status: Not effective - Superseded. Registration information 1404-stot 09/29/2015 (the official website of Rosstandart); (IUS 4-2016)

The standard establishes the requirements for acceptance, marking, packaging, transportation and storage of steel cast iron pipes and their connecting parts.

Стандарт устанавливает требования к приемке, маркировке, упаковке, транспортированию и хранению стальных чугунных труб и соединительных частей к ним.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 11/18/1980

SKU: RUSS20796

Price: $139.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.10 Cast iron and steel pipes »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V6 Pipes metal and pipe products » V69 Test methods. Packaging. Marking »

National Standards for OKSTU » STEEL PIPES » Marking, packaging, transportation and storage »


The Document is Replaced With:

GOST 10692-2015: Steel and cast iron pipes and fittings. Acceptance, marking, packing, transportation and storage

As a Replacement Of:

GOST 10692-73: Steel and cast iron pipes and fittings. Marking, packing, transportation and storage

The Document References:

GOST 10692-73: Steel and cast iron pipes and fittings. Marking, packing, transportation and storage

GOST 14192-77: Marking of cargoes

GOST 14192-96: Cargo marking

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 20435-75: Universal metallic closed container of nominal gross mass 3,0 tn. Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 24634-81: Wooden boxes for export products. General specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 3560-73: Sealing tepe

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 6009-74: Hot-rolled steel strip. Specifications

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9569-2006: Paraffined paper. Specifications

GOST 9569-79: Paraffin paper

The Document is Referenced By:

GOST 10498-82: Seamless extra thin-walled tubes of corrosion-resistant steel

GOST 1060-83: Steel seamless cold-formed tubes for shipbuilding

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 11017-80: High-pressure seamless steel pipes

GOST 11068-64: Tubes of stainless steel, electro welded

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 11249-80: Steel rolled up soldered double-layer tubes

GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications

GOST 13663-68: Shaped steel pipes technical requirements

GOST 13663-86: shaped steel pipes technical requirements

GOST 14162-79: Steel tubes of small dimensions (capillary)

GOST 15040-77: Oxygen-free copper pipes

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 15846-79: Products for transportation to the areas of the far north and remote regions

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 20295-74: Steel welded pipes for main gas and oil pipelines

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 21053-75: Pipes, cast iron, under pressure with a butt joint for rubber sealing cuffs

GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.

GOST 23270-89: Tube-billets for machining

GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry

GOST 24569-81: Occupational safety standards system. Steam and hot-water boilers. Marking

GOST 26250-84: Drill pipes for borehole tools with retrievable core

GOST 26653-2015: Preparation of general cargoes for transportation. General requirements

GOST 26653-85: Preparation of general cargo for transportation by sea. General requirements

GOST 26653-90: Preparation of general cargoes for transportation. General requirements

GOST 27590-2005: House-tube water-watered heat supply systems. General specifications

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31445-2012: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31448-2012: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST 5005-65: Steel electric welded pipes for camshafts

GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds

GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding

GOST 617-90: Copper tubes. Specifications

GOST 6238-77: Casing pipes and core barrels for prospecting drilling and nipples to them

GOST 631-75: Upset drill pipes with couplings

GOST 632-80: Casing pipes and couplings for them. Specifications

GOST 633-80: Oil well tubing and tubing couplings

GOST 7360-2015: Drill-stem subs. Technical specification

GOST 767-91: Copper anodes. Specifications

GOST 7909-56: Drill prospecting pipes and coupling to them

GOST 800-78: Bearing tubes. Technical requirements

GOST 8467-83: Steel drill pipes with

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST 8965-75: Connecting parts made of steel, with parallel thread, for pipelines of pressure p = 1.6 мpа

GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

GOST R 50278-92: Drill pipes with weld-on tool joints. Specifications

GOST R 51245-99: Steel universal drill rods. General specifications

GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications

GOST R 51924-2002: Double tube core barrel for exploration drilling. General technical specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52568-2006: Steel pipes with defensive covering for main gas and oil pipelines. Specifications

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53384-2009: Steel and cast iron tubes and pipes with protective coatings. Technical requirements

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST R 55170-2012: Steam and hot-water stationary boilers, heat recovery steam generators. Marking

GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 56030-2014: Pipes for details of bearings. Technical specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

Manual for SNiP 3.05.04-85: Allowance for laying and installation of cast-iron, reinforced concrete and asbestos-cement water supply and sewage pipelines

OST 36-26-77: Welded details of pipelines Dy 500-1400 mm made of carbon steel for Pnom <= 2.5 MPa (≈ 25 kg/cm2). General technical requirements.

OST 36-49-81: Welded and bent details pipelines made of carbon steel with Dy up to 500 mm, for Py up to 10 MPa (100 kg/cm2). Technical conditions.

RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg

RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg

SP 40-106-2002: Design and installation of underground water supply pipelines using pipes of ductile cast iron with nodular graphite

SP 40-109-2006: Code of practice for design and installation of water and sewer systems with pipes made of high-strength ductile iron and nodular graphite

SP 42-102-96: Code of practice for the use of steel pipes for the construction of gas supply systems

SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite

TR 101-07: Technical recommendations for the design and construction of non-pressure underground pipelines for domestic and rainwater sewage from polyethylene pipes with a two-layer profiled wall "Korsis"

TR 170-05: Technical recommendations for the design and construction of underground drainage networks of non-pressure polyethylene pipes with a double-layer wall

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T

TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC

TU 1317-233-0147016-02: Seamless hot-deformed oil and gas pipes of increased reliability during operation for the fields of OAO Tomskneft VNK

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 1390-001-86695843-08: Steel pipes with a diameter of 57-1420 mm with an external two-layer and three-layer polyethylene coating

TU 1390-004-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anticorrosive polyethylene coating for the construction of trunk pipelines

TU 1390-005-86695843-2010: Steel pipes with outer anti-corrosion polyethylene coating for gas pipelines

TU 1390-007-86695843-2010: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of field and main oil pipelines

TU 1390-008-86695843-2011: Steel pipes with internal smoothing coating for gas pipelines

TU 1390-010-86695843-2011: Steel pipes and pipeline components welded with an internal anti-corrosion coating based on a paint material with high dry residue

TU 1390-012-86695843-2011: Steel pipes and fittings 57–2020 mm in diameter with internal single-layer coating based on liquid solvent-free epoxy materials

TU 1390-014-86695843-2011: Steel pipes and parts of pipelines with external two-layer epoxy anticorrosion coating

TU 1390-015-86695843-2011: Steel pipes with Stelrant external anticorrosion polyurethane coating

TU 1390-016-86695843-2011: External epoxy coating for pipes. Technical conditions

TU 1390-017-05757848-2005: Electrowelded steel pipes with an internal smooth coating for gas pipelines with a diameter of 273 to 1420 mm

TU 1394-006-86695843-10: Steel pipes with epoxy protective coating

TU 1394-011-86695843-2011: Steel pipes with an external two-layer epoxy coating resistant to ultraviolet radiation. Technical conditions

TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields

TU 14-161-184-2000: Steel seamless tubes of steel grade 09G2S

TU 14-162-14-96: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions

TU 14-3-1109-82: Seamless cold and heat deformed pipes made of stainless steel

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1401-86: Seamless cold-deformed pipes of steel grade 02Х18Н11

TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications

TU 14-3-1430-87: Pipes, Seamless and Welded, Second-Grade

TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines

TU 14-3-1698-2000: Steel electric-welded longitudinal pipes with a diameter of 1020, 1220 mm for gas and oil pipelines

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines

TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3-587-77: Seamless hot-rolled pipes of steel grade 20 for the refining industry

TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications

TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions

TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)

TU 14-3R-37-2000: Steel electric-welded longitudinal pipes with a diameter of 102–1220 mm with an external protective coating based on extruded polyethylene. Technical conditions

TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions

TU 14-3R-50-2001: Steel pipes, seamless, hot-rolled, thick-walled, of cast ingot

TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering

TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines

TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications

TU 14-3R-67-2003: Electrowelded steel pipes with a diameter of up to 1,420 mm with an external anti-corrosion polyethylene coating for the construction of trunk pipelines. Technical conditions

TU 1461-037-50254094-2004: High-strength cast iron pressure pipes. Technical conditions

TU 1461-062-50254094-2003: High-strength cast iron pressure pipes for the electrochemical protection of underground metal structures. Technical conditions

TU 1461-064-50254094-2003: High-strength cast iron pipes for storm sewer free-flow systems

TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK

TU 1469-006-01297858-02: Specifications cold bending curves from steel electric-welded pipes with diameters of 720-1020 mm with insulating coating for main pipelines

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!