GOST 12893-2005

ГОСТ 12893-2005

Single-seated, double-seated and cage control valves. General specifications

Клапаны регулирующие односедельные, двухседельные и клеточные. Общие технические условия

Status: Effective

The standard applies to single-seat, double-seat and cellular control valves for general industrial use with pneumatic diaphragm or piston actuators and electric actuators, as well as with remote control of actuators designed for operation on liquid and gaseous media of automatic control systems of technological processes. The standard does not apply to diaphragm and hose valves, hand-operated valves and valves for gas transporting systems. The standard is suitable for certification purposes.

Стандарт распространяется на односедельные, двухседельные и клеточные регулирующие клапаны общепромышленного назначения с пневматическими мембранными или поршневыми исполнительными механизмами и электрическими исполнительными механизмами, а также с дистанционным управлением исполнительными механизмами, предназначенные для работы на жидких и газообразных средах систем автоматического регулирования технологических процессов. Стандарт не распространяется на диафрагмовые и шланговые клапаны, клапаны с ручным управлением и клапаны для систем, транспортирующих газ. Стандарт пригоден для целей сертификации.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 30

Approved: Federal Agency for Technical Regulation and Metrology, 2/19/2008

SKU: RUSS20803

Price: $381.74




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 032/2013 TR CU. On safety of overpressure equipment » Regulations and standards (to 032/2013 TR CU) »

Standards for pipe fittings (TPA) » 11. Piping valves (TPA) tests » 11.2 Basic test procedures »

Standards for pipe fittings (TPA) » 2. Standards for general specifications » 2.2 Control valves »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.1 Machinery, equipment and components for general engineering applications » 4.13.1.1 Components and assembly units for general engineering applications »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.01 Pipe fittings in general »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.01 Pipe fittings in general »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipe fittings » 23.060.40 Control valves »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.060 Pipeline valves » 23.060.40 Control valves »

National Standards for KGS (State Standards Classification) » Latest edition » T General technical and organizational and methodological standards » T3 Physics and Mechanics » T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »


As a Replacement Of:

GOST 12893-83: Single-seated, double-seated and cage control valves.

The Document References:

GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles

GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers

GOST 12.1.007-76: Noxious substances. Classification and general safety requirements

GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements

GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions

GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions

GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions

GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions

GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions

GOST 12893-83: Single-seated, double-seated and cage control valves.

GOST 13373-67: Actuating pneumatic diaphragm-spring straight motion mechanisms SSI. Types. Basic parameters and dimensions

GOST 14192-96: Cargo marking

GOST 14691-69: Control devices for automatic regulation systems. Terms

GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 162-90: Depth gauges. Specifications

GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions

GOST 16587-71: Safety valves, control valves and pressure regulators. Face-to-face lengths

GOST 166-89: Vernier callipers. Specifications

GOST 17433-80: Industrial purity. Compressed air. Grades of contamination

GOST 18322-78: Equipment maintenance and repair system. Terms and definitions

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.602-95: Unified system for design documentation. Repair documents

GOST 20736-75: Quality control. Sampling inspection by variables for normal distribution of inspected parameters

GOST 23170-78: Packing for products of engineering industry. General requirements.

GOST 23866-87: Single-seated, double-seated and cellular

GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements

GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges

GOST 24297-87: Input inspection of products. General provisions.

GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions

GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values

GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 24856-81: Industrial pipeline fittings. Terms and definitions

GOST 26304-84: Industrial pipeline valves supplied

GOST 26349-84: Tube connections and fittings. Nominal pressures. Series

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements

GOST 28338-89: Nominal bores (nominal sizes)

GOST 2874-82: Drinking water. Hygienic requirements and quality control

GOST 29329-92: Balance for static weightings

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications

GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications

GOST 3242-79: Welded joints

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4666-75: Valves. Marking and distinctive painting

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 5890-78: Pipe connection with screwed ends. Specifications

GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions

GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps

GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations

GOST 8032-84: Preferred numbers and series of preferred numbers

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8908-81: Basic norms of interchangeability. Standard angles and angle tolerances

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9142-90: Boxes of corrugated board. General specifications

GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile

GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.

GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture

GOST R 50779.74-99: Statistical methods. Sampling procedures and charts for inspection by variables for percent nonconforming

GOST R 51232-98: Drinking water. General requirements for organization and quality control methods

GOST R 52720-2007: Pipeline valves. Terms and definitions

PR 50.2.002-94: Procedure for Government Metrological Inspection of the Manufacturing, Condition, and Application of Measuring Devices Certified Using Measurement Procedures, Standards, and Compliance with Metrological Standards and Codes

GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements

The Document is Referenced By:

GOST 12.2.063-2015: Pipeline valves. General safety requirements

GOST 31901-2013: Pipeline valves for nuclear stations. General specifications

GOST 33257-2015: Pipeline valves. Methods of control and testing

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34437-2018: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics

GOST R 53402-2009: Pipeline valves. Methods of control and testing

GOST R 53672-2009: Pipeline valves. General safety requirements

GOST R 54808-2011: Pipeline valves. Leakage rates of valves.

GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications

GOST R 55508-2013: Pipeline valves. Technique of the experimental definitions hydraulic and cavitation characteristics

GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications

OIT-0013-2000: Nomenclature of equipment, products and technologies for nuclear installations, radiation sources and storage facilities, subject to mandatory certification in the System of certification of equipment, products and technologies for nuclear installations,

ST TsKBA 006-2003: Pipe fittings. Cryogenic fittings. General technical conditions

ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities

ST TsKBA 029-2006: Pipe fittings. Methods of experimental determination of hydraulic and cavitation characteristics

ST TsKBA 036-2014: Pipe fittings. Tables of figures and symbols. Directory

ST TsKBA 081-2009: Pipe fittings. Passport Recovery Procedure

ST TsKBA 082-2009: Pipe fittings. Input control

GOST 4.114-2019: Pipe fittings. Nomenclature of key indicators

GOST R 58423-2019: Gas pressure regulators for inlet pressure not higher than 10 MPa

ST TsKBA 036-2007: Pipe fittings. Tables of figures and legend. Directory

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Occupational safety standards system. Noise. General safety requirements
Language: English
Price: $150.48
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Buildings and constructions. Method for determining wind loads on the building envelope
Language: English
Price: $88.22
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $448.52
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $106.03
Erecting cranes. Removable lifting devices and containers. Operation
Language: English
Price: $651.36
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Industrial equipment. General safety requirements
Language: English
Price: $71.53
Three-phase asynchronous motors. General specifications.
Language: English
Price: $100.98
Rules for Development, Production and Application of Membranous Safety Equipment
Language: English
Price: $242.55
Asbestos fabric
Language: English
Price: $105.54
Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
Language: English
Price: $130.68
Welded joints. Methods of mechanical properties determination
Language: English
Price: $218.79
Strength calculation norms for stationary boilers and steam and hot water pipelines.
Language: English
Price: $445.50
Guidelines for technological design of seaports. Parts I and II. Ministry of Transport, DMT. Soyuzmorniiproekt, 1993
Language: English
Price: $2,214.83
Steel castings. General specifications
Language: English
Price: $170.28
Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
Language: English
Price: $346.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!