GOST 2.103-68
ГОСТ 2.103-68
|
|
Unified system for design documentation. Stages of designing
Единая система конструкторской документации. Стадии разработки
Status: Not effective - Superseded. Registration information 1794-st dated November 26, 2014 (official site of Rosstandart) (IUS 7-2015)
The standard establishes the stages of development of design documentation for products of all industries and the stages of work at each stage of development.
Стандарт устанавливает стадии разработки конструкторской документации изделий всех отраслей промышленности и этапы выполнения работ на каждой стадии разработки.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
12/1/1967
SKU: RUSS20811
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
01 General. Terminology. Standardization. Documentation »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.1 Ensuring product quality at stage of technical preparation of production »
2.1.1 Design preparation of production »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T52 Design Documentation System »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system for design documentation (ESKD) »
The Document is Replaced With:
GOST 2.103-2013: Unified system for design documentation. Stages of designing
The Document References:
GOST 2.002-72: Unified system for design documentation. Requirements for models and templates used in projecting
GOST 2.052-2006: Unified system for design documentation. Electronic model of product. General
GOST 2.118-73: Unified system for design documentation.
GOST 2.119-73: Preliminary design
GOST 2.120-73: Unified system of design documentation technical project
The Document is Referenced By:
GOST 12.2.021-76: The Explosion proof Electrical Apparatus. The Order of Checking of Technical Documentation, on the Part of its Compliance with the National Standards, the Test and Certification Procedures
GOST 12.4.238-2015: Occupational safely standards system. Closed-circuit breathing apparatus compressed air type. Requirements, testing, marking. Simples selection rules
GOST 12.4.249-2013: Occupational safety standards system. Individual protective respiratory devices. Compressed oxygen or compressed oxygen-nitrogen type self-contained clos-circuit breathing apparatus. General technical requirements. Test methods. Marking
GOST 14.203-73: Unified system for technological preparation of production. Rules for ensuring the design of assembly units
GOST 14.204-73: Unified system for technological preparation of production. Rules for ensuring the technological design of parts
GOST 14.310-73: Unified system for technological preparation of production. Regulations for arrangement of development of technological equipment means
GOST 15.001-73: Products development and launching into manufacture. General principles
GOST 2.031-83: Unified system for design documentation. Documents on punched cards and punched tapes. Basic inscriptions
GOST 2.053-2006: Unified system for design documentation. Product electronic structure. General
GOST 2.102-2013: Unified system for design documentation. Types and sets of design documentation
GOST 2.125-2008: Unified system for design documentation. Rules for making sketch design documents. General principles
GOST 2.305-2008: Unified system for design documentation. Images - appearance, sections, profiles
GOST 2.609-79: Unified system for design documentation. Order of development, endorsement and approval of operation and repair documents
GOST 21.602-79: System of design documents for construction. Heating, ventilation and air conditioning. Working drawings
GOST 21.603-80: Communication and signaling.
GOST 21.605-82: System of design documents for construction. Heat supply systems (thermo mechanical part). Working drawings
GOST 21.607-82: System of building design documents. Electric lighting for industrial project site. Working drawings
GOST 21.609-83: System of building design documents. Gas supply. Internal equipment. Working drawings
GOST 23501.1-79: Computer-aided design systems. Stages of development
GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development
GOST 25804.2-83: Atomic power station technological processes control system equipment. Reliability requirements
GOST 26199-84: Industrial unification. Work procedure
GOST 28388-89: Information processing systems. Documents of magnetic media. Order of realization and circulation
GOST 3.1102-2011: Unified system of technological documentation. Stages of designing and types of documents. General principles
GOST 3.1102-81: Unified system for technological documentation. Stages of designing and types of documents
GOST 31538-2012: Live-cycle of railway rolling stock. General requirements
GOST 31812-2012: Civil aviation aircraft and helicopter ground support equipment. General technical requirements
GOST 33368-2015: Oil and oil products trunk pipeline transportation. Filters. General technical specifications
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.103-73: State system for ensuring the uniformity of measurements. Organization and carrying out procedure of design and technological documentation metrological examination
GOST 8.315-91: State system for ensuring the uniformity of measuring. Reference materials. Basic principles, ways of development, certification, approval, registration and use
GOST R 12.4.186-2012: Occupational safety standards system. Respiratory individual protective devices. Closed-circuit breathing apparatus compressed air type. Technical requirements. Test methods. Marking. Simples selection rules
GOST R 12.4.249-2009: Occupational safety standards system. Individual protective respiratory devices. Compressed oxygen or compressed oxygen-nitrogen type self-contained clos-circuit breathing apparatus. General technical requirements. Test methods. Marking
GOST R 12.4.273-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air supply apparatus completed with face mask or mouthpiece (escape breathing apparatus). Technical requirements. Test methods. Marking
GOST R 12.4.274-2012: Occupational safety standards system. Self-contained open-circuit compressed air breathing apparatus incorporating a hood for escape. Requirements, testing, marking
GOST R 12.4.275-2012: Occupational safety standards system. Respiratory protective devices. Powered atmospheric air supply hose apparatus with helmet. Technical requirements. Test methods. Marking
GOST R 12.4.276-1-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 1. Apparatus with a full face mask. Technical requirements. Test methods. Marking
GOST R 12.4.276-2-2012: Occupational safety standards system. Respiratory protective devices. Compressed air line supply breathing apparatus. Part 2. Apparatus with half mask at positive pressure. Requirements. Test methods. Marking
GOST R 12.4.277-2012: Occupational safety standards system. Respiratory protective devices. Respiratory lung-governed protective device for escape with compressed air, half mask and positive pressure. Technical requirements. Test methods. Marking
GOST R 12.4.278-2012: Occupational safety standards system. Respiratory protective devices. Self-contained open-circuit compressed air breathing apparatus with half mask, designed to be used with positive pressure only. Technical requirements. Test methods. Marking
GOST R 15.013-94: System of product development and launching into manufacture. Medical products
GOST R 50982-2009: Fire equipment. Specialized fires department tools. General technical requirements. Test methods
GOST R 50995.3.1-96: Technological supplement for products development and production. Technological preparation of production
GOST R 52906-2008: Equipment of the aviation fuelling system. General technical requirements
GOST R 53255-2009: Fire equipment. Self-contained open-circuit compressed air breathing apparatus. General technical requirements. Test methods
GOST R 53256-2009: Fire equipment. Self-contained closed-circuit breathing apparatus with compressed oxygen. General technical requirements. Test methods
GOST R 53257-2009: Fire equipment. Full face masks breathing apparatus. General technical requirements. Test methods
GOST R 53258-2009: Fire equipment. The small size cylinders for apparatuses breathing and self-contained escape with compressed air. General technical requirements. Test methods
GOST R 53259-2009: Fire equipment. Self-contained escape with compressed air for protection of the people against toxic products at evacuation from smoking buildings from fire. General technical requirements. Test methods
GOST R 53260-2009: Fire equipment. Self-contained escape with chemical oxygen for protection of the people against toxic products at evacuation from smoking buildings from fire. General technical requirements. Test methods
GOST R 53262-2009: Fire equipment. Devices for control breathing apparatuses. General technical requirements. Test methods
GOST R 53263-2009: Fire equipment. Compressor unit for filling of low-volume bottles with compress air breathing apparatus for fireman. General technical requirements. Test methods
GOST R 53264-2009: Fire equipment. Special clothing for fire-fighter. General technical requirements. Test methods
GOST R 53265-2009: Mean of individual defence of feet for fire-fighter. General technical requirements. Test methods
GOST R 53267-2009: Fire equipment. Fire snap hook. General technical requirements. Test methods
GOST R 53271-2009: Fire equipment. Fire escape chute. General technical requirements. Test methods
GOST R 53273-2009: Fire equipment. Fire jumping down rescue devices. General technical requirements. Test methods
GOST R 53275-2009: Fire equipment. Fire department hand-operated ladders. General technical requirements. Test methods
GOST R 53336-2009: Live-cycle of railway rolling stock. General requirements
GOST R 53393-2009: Integrated Logistic Support. General principles
GOST R 53543-2009: Aircraft and helicopter ground support equipment. General technical requirements
GOST R 54087-2010: Integrated logistic support. Quality assurance and approval of electronic interactive maintenance and repair documents. Basic principles and general requirements
GOST R 54090-2010: Integrated logistic support. Electronic lists and catalogues of provisioning items. Basic principles and general requirements
GOST R 55260.2.2-2013: Hydro power plants. Part 2-2. Hydrotreaters. Hydraulic estimation procedures of operating conditions
GOST R 55998-2014: Petroleum and natural gas industries. Offshore production installation. Evacuation ways and temporary safe refuges. General requirements
GOST R 56135-2014: Life cycle management for military products. General provisions
GOST R 56519-2015: Automatic spacecrafts. Thermal vacuum treatment. General requirements
GOST R 56528-2015: Methods and means of maintenance of protection of products of rocket and space-rocket mechanics from a static electricity in the flight conditions. Requirements for creation and operation processes
GOST R 8.825-2013: State system for ensuring the uniformity of measurements. Intelligent Sensors and Intelligent Measuring Systems. Methods of accelerated tests
MI 1753-87: Guidelines. State system for ensuring uniformity of measurements. Means of automated calibration. Additional instructions to the composition of the technical specifications and the order of development of prototypes
MU 1.2.3.07.0057-2016: Composition and scope of tests of special pipeline valves and actuators for nuclear power plants. Methodical instructions
NPB 151-2000: Fire-fighting cabinet. Technical requirements of fire safety. Test methods
NPB 152-2000: Fire equipment. fire hose. Technical requirements of fire safety. Test methods
NPB 152-96: Fire hose. General technical requirements. Test Methods
NPB 153-2000*: Fire fighting equipment. Fireheads connecting. Technical requirements for fire safety. Test methods
NPB 153-96: Connecting heads for fire equipment. Basic Indexis. Test Methods
NPB 154-2000: Fire machinery. Fire hydrants valves. Specifications for fire safety. Test methods.
NPB 154-96: Fire valves. Basic Indexis. Test Methods
NPB 155-2002: Fire engineering. Fire extinguishers. The order of statement of fire extinguishers on production and realizations of certified tests
NPB 155-96: Fire engineering. Portable fire extinguishers. General reguirements and Test Methods
NPB 156-96: Fire engineering. Wheeled fire extinguishers. General reguirements and test methods
NPB 157-99*: Firefighter's combat clothing. General technical requirements. Test methods
NPB 158-97*: Special protective shoes for firefighters. General technical requirements and test methods
NPB 159-97*: Fire fighting equipment. Fire monitors combined. General technical requirements. Test methods
NPB 161-97*: Special protective clothing for firefighters against increased heat. General technical requirements. Test methods
NPB 162-2002: Special protect clothing for fire-fighters isolation type. General technical requirements. Test methods
NPB 163-97*: Fire fighting equipment. The main fire trucks. General technical requirements. Test methods
NPB 164-2001: Fire equipment. Oxygenous self-contained gas-masks for fireman. General technical requirements. Test methods
NPB 164-97*: Fire fighting equipment. Oxygen gas masks (respirators) for firefighters. General technical requirements and test methods
NPB 165-2001: Fire equipment. Breathing apparatuses with compressed air for fireman. General technical requirements. Test methods
NPB 167-97*: Fire rescue rope. General technical requirements. Test methods
NPB 168-97*: Firefighter carbine. General technical requirements. Test methods
NPB 169-2001: Fire equipment. Self-rescue for protection breathing and sight of people for come out buildings from fire. General technical requirements. Test methods
NPB 170-98*: Extinguishing powder for general purposes. General technical requirements. Test methods
NPB 171-98*: Manual fire ladders. General technical requirements. Test methods
NPB 172-98*: Fire rescue belts. General technical requirements. Test methods
NPB 173-98*: Helmets are fire. General technical requirements. Test methods
NPB 174-98*: Fire extinguishing powders for special purposes. General technical requirements. Test methods. Classification
NPB 175-2002: Fire portable cord. General technical requirements. Test methods
NPB 177-99: Fire-fighting equipment. Hand nozzles. General technical requirements. Test methods
NPB 180-99: Fire engineering. Fire vehicles. Development and putting into production
NPB 182-99: Fire engineering. Individual protective equipment of hand for firemen. General technical requirements. Test methods
NPB 183-99*: Fire fighting equipment. The catchment is hose. General technical requirements. Test methods
NPB 184-99*: Fire fighting equipment. Fire column. General technical requirements. Test methods
NPB 186-99: Fire equipment. Compressor unit for filling of iow-volume balloons with compress air breathing apparatus for fireman. General technical requirements. Test methods
NPB 189-00: Fire-fighting equipment. Air-foam nozzles. General technical requirements. Test methods
NPB 193-2000: Fire rope descenders. Technical requirements of fire safety. Test methods
NPB 196-2000: Fire-fighter clothing for regions of Russia with the temperate cold, cold and very cold climate. Technical fire safety requirements. Test methods
NPB 199-2001: Engineering fire. Extinguishers. Pressurizing sources. Communal specifications. Test methods
NPB 200-2001: Fire-fighting equipment. Foammixers. General technical requirements. Test methods
NPB 301-2001: Fire equipment. Fire ventilators portable. General technical requirements. Test methods
NPB 302-2001: Fire equipment. Filter self-rescue for protection breathing and sight of people for come out buildings from fire. General technical requirements. Test methods
NPB 303-2001: Fire jumping down rescue devices. Technical requirements. Test methods
NPB 305-2001: Fire engineering. Charge of foam extinguishers and foam fire fighting sistems. General technical requirements and test methods
NPB 306-2002: Fire-fighting equipment. Suction gauzes. General technical requirements. Test methods
NPB 309-2002: Fire equipment. Devices for control breathing apparatuses with compressed air and oxygenous self-contained gas-masks for fireman. General technical requirements. Test methods
NPB 313-2002: Fire fighting equipment. Fire motor pumps. General technical requirements. Test methods
OST 108.001.02-81: Unification of products. Basic requirements for the development (selection) of the base product in power engineering
OST 108.001.08-77: Development and production of products for production. Power Engineering Products
OST 108.001.08-81: System development and production of products. Power engineering products. Main provisions
OST 108.001.17-82: Procedure for carrying out normative control of design and regulatory and technical documentation
OST 13-26.1-82: System for development and launch of new products. Production of woodworking industries
OST 24.010.01-80: Metallurgical equipment. General technical requirements for products of domestic and export quality.
OST 25.1003-82: The system for rationing of the consumption of materials. Precious metals. Part I
OST 25.1241-86: Installation of automatic fire extinguishing, fire, security and fire alarm systems. Working drawings
OST 26-07-2046-82: Pipeline fittings. Application of standards of uniform system of design documentation (USDD).
OST 34-13-959-88: Card of the technical level and product quality. Procedure of compilation and maintaining of the level card
OST 34-28-448-78: Special devices for automation and control for power facilities. Capacitors. The nomenclature allowed for use
OST 34-28-449-78: Special devices of automation and control for power facilities. Resistors. The nomenclature allowed for use
OST 34-28-450-78: Special devices for the automation and control of power facilities. Circuit boards. Basic dimensions
OST 45.186-2001: Technical assignment for the development of scientific and technical products of telecommunication. Requirements for content and presentation
OST 45.21-81: Completeness, designation and basic inscriptions of design and estimate documentation for construction of communication facilities and facilities
OST 45.51-96: Automatic container telephone stations. Acceptance Rules
OST 68-2.6-97: Operational documentation on topographic-geodesic devices. Content and general requirements.
OST 95 18-2001: Scientific-research and experimental-design procedures. General provisions.
P SSFZhT 45/ISO 9001-2003: The certification system on the federal railway transport of the Russian Federation. Quality Management System. Requirements
PR 32.140-99: Metrological support. Standard samples of industry enterprises. The procedure for the development, certification, approval, registration, control and supervision
R 50.1.031-2001: Continuous acquisition and life-cycle support. Glossary. Part 1. Product life-cycle stages
R 50-54-102-88: Recommendations. The order of work on inter-sectoral, industrial and industrial unification
R 50-54-11-87: Unified system of technological preparation of production. General provisions on the selection, design and application of technological equipment
R 52.14.648-2003: Recommendations. Metrological examination of regulatory and technical documentation
RD 31.30.11.01-84: Guideline on technological design of communication and the alarm system in seaports and at the MMF ship-repair enterprises. Wire communications capabilities.
RD 32.31-2000: Metrological support. The procedure of metrological control and supervision at enterprises and organizations of the federal railway transport
RD 34.27.601: Procedural Guidelines for Improving Ash Collection in Electric Filters and Procedure for Planning and Organizing Work to Renovate Then
RD 39-1-542-81: Guidelines for testing the design of geophysical instruments and equipment for manufacturability. Order of conduct
RD 39-3-158-79: Guidelines for patent research in the oil industry
RD 45.000.023-91: Rules for applying the provisions of state ESKD standards in the industry
RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.
RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks
RD 50-110-80: Instructions for state supervision of the implementation and compliance with standards, technical conditions, metrological support and quality of industrial products
RD 50-163-79: Instruction on the procedure for coordinated development, approval and implementation of standards, technical conditions and prices for cultural goods and household goods
RD 50-285-81: System development and production of products. Guidelines for the development and implementation of system standards
RD 50-538-85: Guidelines. System development and production of products. The order of development avanproekt to create new products
RD 50-79-83: Instructions on the procedure for coordinated development, approval and introduction of regulatory and technical documentation and wholesale prices for machinery, equipment and devices for industrial purposes
RD 52.14.617-2000: Instructions. The order of the norm control
RD 95 762-91: Metrological expertise of design and technological documentation.
RDI 126-78: Instruction on the procedure for coordinated development, approval and introduction of standards, technical conditions and prices for products of primary industries of heavy industry
RDI 79-76: Instruction on the procedure for coordinated development, approval and introduction of technical specifications and prices for engineering products for industrial purposes
RDMU 83-82: Guidelines for the implementation of standards of the safety standards system in sectors of the economy
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RG 1.3.3.99.0018-2010: Regulations for the interaction of Concern Rosenergoatom OJSC and the Engineering Company (NPP General Designer) upon approval of technical documentation for NPP equipment
RM 4-261-91: Process automation systems. Handbook for the implementation of design documentation
RST RSFSR 779-91: System development and production of products. Means of mechanization for enterprises of the textile industry
RTM 24.080.38-78: Methodology for assessing the quality level of coal processing equipment
RTM 26-79-72*: Application of standards of a unified system of design documentation (ESKD)
RTM 36.18.32.1-91: Stages of development and composition of documentation for the electric drive and automation systems
ST TsKBA 035-2007: Pipe fittings. Designation of design documentation and specifications. Completeness CD
STK 5-2005: Nuclear Reactors. Organizational and technical procedure for the development and production of cores and their components
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
VNTP 25-81: Instruction on the procedure for development and financing of technical documentation for custom equipment, envisaged in the projects of the enterprises of the Ministry of Coal Industry of the USSR
VSN 202-85-AD: Temporary instruction on the composition, procedure for the development, approval and registration of design estimates for the construction of public roads
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.