GOST 23941-2002
ГОСТ 23941-2002
|
|
Noise of machines. Methods for determination of noise characteristics. General requirements
Шум машин. Методы определения шумовых характеристик. Общие требования
Status: Effective
The standard applies to machines, mechanisms, equipment, devices of all kinds and other sources of airborne noise (hereinafter - machines) and establishes: - the noise characteristics of machines; - requirements for methods for determining (measuring) the noise characteristics of machines; - operating modes of machines in determining the noise characteristics; - requirements for the installation of machines in determining the noise characteristics; - test protocol requirements; - requirements for the reflection of the noise characteristics of machines in the operational documents. The standard does not apply to vehicles in motion, as well as to multiple and extended sources of noise (manufacturing plants, conveyors, chimneys, etc.). The standard is not applicable to the definition of noise inside ducts, gas pipelines, etc .; in places of stay of people, including in the workplace, if the noise in them is due to exposure to many sources. However, the standard is to be applied to determine the noise of the test machine at its workplace and at other control points near the machine.
Стандарт распространяется на машины, механизмы, оборудование, приборы всех видов и другие источники воздушного шума (далее - машины) и устанавливает: - шумовые характеристики машин; - требования к методам определения (измерения) шумовых характеристик машин; - режимы работы машин при определении шумовых характеристик; - требования к установке машин при определении шумовых характеристик; - требования к протоколу испытаний; - требования к отражению шумовых характеристик машин в эксплуатационных документах. Стандарт не распространяется на машины, находящиеся в движении, а также на множественные и протяженные источники шума (производственные предприятия, конвейеры, дымовые трубы и т.д.). Стандарт не подлежит применению для определения шума внутри воздуховодов, газопроводов и т.д.; в местах пребывания людей, в том числе на рабочих местах, если шум в них обусловлен воздействием многих источников. Однако стандарт подлежит применению для определения шума испытуемой машины на ее рабочем месте и в других контрольных точках вблизи машины.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
8/15/2002
SKU: RUSS20823
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
018/2011 TR CU. On safety of wheeled vehicles »
Regulations and standards (to 018/2011 TR CU) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
038/2016 TR EAEU. About safety of rides »
Regulations and standards (to 038/2016 TR EAEC) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
5 Protection against mechanical vibrations »
5.2 Acoustic noise »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.1 Motor vehicles and equipment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.01 Acoustic measurements and noise control in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.01 Acoustic measurements and noise control in general »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.140 Acoustics and acoustic measurements »
17.140.20 Noise from machinery and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T3 Physics and Mechanics »
T34 Oscillatory and wave-like movements. Bodies vibration. Sound. Acoustics »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Applied statistics. Methods for statistical control of quality, reliability, durability. General methods of control and testing of products »
As a Replacement Of:
GOST 23941-79: Noise of machines. Methods for determination of noise characteristics. General requirements
The Document References:
GOST 23941-79: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 27408-87: Noise. Methods for statistical processing of data in determination and control of machine emitted noise level
GOST 30457-97: Acoustics. Determination of sound power levels of noise sources using sound intensity. Measurement at discrete points. Engineering method
GOST 30683-2000: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Method requiring environmental corrections
GOST 30691-2001: Noise of machines. Declaration and verification of noise emission values
GOST 30720-2001: Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
Decision 219: The list of international and regional (interstate) standards, and in their absence - national (state) standards, the application of which on a voluntary basis to ensure compliance with the requirements of the technical regulations of the Customs Union "On the safety of wheeled vehicles". (TR CU 018/2011), and a list of international and regional (interstate) standards, and in their absence - national (state) standards containing the rules and methods of research (tests) and measurements, including sampling rules necessary for the application and implementation of the requirements of technical regulations of the Customs Union "On the safety of wheeled vehicles" (TR CU 018/2011) (TR CU 018/2011) and conformity assessment of objects of technical regulation
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.2.004-75: Occupational safety standards system. Special machines and devices for pipe-line building. Safety requirements
GOST 12.2.016.1-91: Compressor equipment
GOST 12.2.030-2000: Occupational safety standards system. Hand tools. Noise characteristics. Limits. Methods of testing
GOST 12.2.112-86: Occupational safety standards system. Mine electric locomotive transport. General requirements for rolling stock
GOST 12.2.115-2002: Operation safety standard system. Blow-out preventers. Safety requirements
GOST 12.2.124-2013: Occupational safety standards system. Alimentary product equipment. General safety requirements
GOST 12.2.228-2004: Occupational safety standards system. Tools and service work-over rigs for work-over of oil wells. Safety requirements
GOST 12.2.231-2012: Occupational safety standards system. Polygraphic equipment. Safety requirements and test methods
GOST 12.2.232-2012: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST 14177-88: Spindles with built-in drive
GOST 15035-80: Underground scraper winches
GOST 17108-86: Positive-displacement hydraulic drive and lubricating systems. Methods of parameters measurement
GOST 20296-2014: Aircraft and helicopter of civil aviation. Acceptable noise levels in flight decks and in salons and methods of noise measurement
GOST 20790-93: Medical instruments, apparatus and equipment. General specifications
GOST 24278-2016: Stationary steam turbines for electric generators of thermal electric stations. General technical requirements
GOST 25148-82: Stationary dental units
GOST 26699-98: Underground drilling rigs. General specifications and test methods
GOST 27243-2005: Noise of machines. Determination of sound power levels using sound pressure. Comparison method in situ
GOST 28581-90: Mechanical and electrical typewriters
GOST 28603-90: Devices for uhf-therapy
GOST 29310-92: Draft systems. Acoustic test methods
GOST 30575-98: Marine, locomotive and industrial diesel engines. Methods of measuring and estimating airborne noise
GOST 30720-2001: Noise of machines. Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level
GOST 31169-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Survey method in situ
GOST 31171-2003: Noise of machines. Guidelines for the selection of method for the determination of emission sound pressure levels at a work station and at other specified positions
GOST 31172-2003: Noise of machines. Measurement of emission sound pressure levels at a work station and at other specified positions. Engineering method in an essentially free field over a reflecting plane
GOST 31273-2003: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for anechoic and semi-anechoic rooms
GOST 31274-2004: Noise of machines. Determination of sound power levels using sound pressure. Precision methods for reverberation rooms
GOST 31277-2002: Machine noise Determination sound power from noise sources according to sound pressure. Approximate method with the use of measuring surface over the sound reflecting plane.
GOST 31300-2005: Noise of machines. Liquid pumps. Noise tests
GOST 31528-2012: Machines and equipment for munufacturing of sugar. Safety requirements
GOST 31529-2012: Machinery and equipment for bread baking industry. Safety requirements
GOST 31543-2012: Metal forging machines. Noise characteristics and methods of their determination
GOST 31545-2012: Production equipment for foundry. Noise characterictics and methods of their control
GOST 31557-2012: Shearers. General technical requirements. Test methods
GOST 31598-2012: Steam large sterilizers. General technical requirements and test methods
GOST 31839-2012: Pumps and pump units for pumping of liquids. General safety requirements
GOST 31840-2012: Submersible pumps and pump units. Safety requirements
GOST 34251-2017: Hydraulic pumps. Noise test code. Accuracy grades 2 and 3
GOST 4.37-90: System of production quality indexes. Positive displacement hydraulic drives, pneumatic drives and lubrication systems. Nomenclature of indeces
GOST 6134-2007: Rotodynamic pumps. Test methods
GOST 6625-85: Mine local ventilating fans
GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51632-2000: Technical aids for disabled persons. General technical requirements and test methods
GOST R 51632-2014: Technical aids for disabled persons. General technical requirements and test methods
GOST R 51935-2002: Steam large sterilizers. General technical requirements and test methods
GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods
GOST R 52232-2004: Light rail cars. General specifications
GOST R 52743-2007: Pumps and pump units for pumping of liquids. General safety requirements
GOST R 52744-2007: Submersible pumps and pump units. Safety requirements
GOST R 53028-2008: Technological foundry equipment. Noise characteristics and methods of control
GOST R 53237-2008: Fiber glass. General requirements for safety in the course of Production and Application
GOST R 53649-2009: Shearers. General technical requirements. Test methods
GOST R 53838-2010: Automobile engines. Noise exposure limits and measurement techniques
GOST R 54320-2011: Food processing machinery. Rotary rack ovens. Safety and hygiene requirements
GOST R 54321-2011: Food processing machinery. Centrifugal machines for processing edible oils and fats. Safety and hygiene requirements
GOST R 54387-2011: Food processing machinery. Dеrinding, skinning and membrane removal machines. Safety and hygiene requirements
GOST R 54388-2011: Food processing machinery. Pie and tart machines. Safety and hygiene requirements
GOST R 54423-2011: Food processing machinery. Food processors and blenders. Safety and hygiene requirements
GOST R 54424-2011: Food processing machinery. Vegetable peelers. Safety and hygiene requirements
GOST R 54425-2011: Food processing machinery. Beam mixers. Safety and hygiene requirements
GOST R 54805-2011: Centrifugal pumps. Technical specifications. Class II
GOST R 54828-2011: Gas-insulated metal-enclosed switchgear for nominal voltages above 110 kV. General technical specification
GOST R 54828-2022: Complete gas-insulated metal-insulated switchgear (GIS) for rated voltages of 110 kV and above. General specifications
GOST R 54967-2012: Food processing machinery and equipment. Сutters. Safety and hygiene requirements
GOST R 54968-2012: Food processing machinery. Mixing machines. Safety and hygiene requirements
GOST R 54969-2012: Food processing machinery and equipment. Equipment for pasta pressing. Safety and hygiene requirements
GOST R 54970-2012: Food processing machinery. Centrifugal devices for drying vegetables and fruits. Safety and hygiene requirements
GOST R 54971-2012: Food processing machinery. Spreaders, stripping and cutting machines, stick return conveyors, stick magazines. Safety and hygiene requirements
GOST R 54972-2012: Food processing machinery and equipment. Filling machines and auxiliary machines. Safety and hygiene requirements
GOST R 55153-2012: The mountain-mine equipment. Underground loading-transport machines. The safety requisitions and test methods
GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods
GOST R 55164-2012: Mining equipment. Movable mine compressor stations. Safety requirements and test methods
GOST R 55619-2013: Renewable power engineering. Wind turbines. Protective measures. Requirements for design, operation and maintenance
GOST R 55716-2013: High-voltage switchgear. General specifications
GOST R 57736-2017: Mining equpment. Mine auxiliary fans. General specifications
GOST R 58507-2019: Electric wheelchairs and scooter. General specifications
MUK 4.3.2230-07: Method for determining the level of acoustic load on the crew members of aircraft taking into account the noise under air headsets
NB ZhT TsE 113-2003: Reactors of smoothing devices of traction substations of direct current. Safety standards Safety standards
POT R M-006-97: Intersectoral labor protection rules for cold metal processing
SP 23-104-2004: Assessment of the noise in the design, construction and operation of subway
SP 254.1325800.2016: Buildings and territories. Rules for designing of industrial sound protection
SP 353.1325800.2017: Noise protection of metro units. Regulations for designing, construction and operation
ST RK 12.1.001-2005: Labour safety standards system. Infra-sound in driver's cabins of railway traction stock. Allowable levels and measuring methods
STB 1357-2002: Industrial sewing machines. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
