GOST 10674-97
ГОСТ 10674-97
|
|
Tank Car of 1520 mm gauge mainline railways. General technical conditions
Вагоны-цистерны магистральных железных дорог колеи 1520 мм. Общие технические условия
Status: Applied in the EAEU
The standard applies to newly manufactured tank wagons (hereinafter referred to as tanks) intended for the transport of hardened, liquid, bulk cargoes and liquefied gases. The standard does not apply to tanks for the transport of liquefied cryogenic gases
Стандарт распространяется на вновь изготавливаемые вагоны-цистерны (далее — цистерны), предназначенные для перевозки затвердевающих, жидких, сыпучих грузов и сжиженных газов. Стандарт не распространяется на цистерны для перевозки криогенных сжиженных газо
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 18
Approved: Interstate Council for Standardization, Metrology and Certification,
11/20/1997
SKU: RUSS208309
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
As a Replacement Of:
GOST 10674-82: Tank cars of 1520 mm gauge main-line railways. General specifications
The Document References:
GOST 1033-79: Fatty cup grease. Specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.085-82: Vessels working under pressure. Safety valves. Safety requirements
GOST 1205-73: Cast iron brake shoes for cars and tenders of broad gauge. Construction and basic dimensions
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications
GOST 17.2.4.02-81: Nature protection. Atmosphere. General requirements for determination of pollutants
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.2-82: Bolts, screws, and studs. Surface imperfections and monitoring methods
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 18194-79: Installations for oil and oil products bottom loading unloading from railway tank cars. Technical specifications
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 21447-75: Coupler contour line. Dimensions
GOST 22235-76: Freight cars for 1520 mm gauge main line railways. General requirements for safety in loading-unloading and shunting operations
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
GOST 22780-93: Car axles for 1520 (1524) mm gauge main-line railways. Types, parameters and dimensions
GOST 26358-84: Pig iron castings
GOST 28338-89: Nominal bores (nominal sizes)
GOST 29329-92: Balance for static weightings
GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 3242-79: Welded joints
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 3333-80: Graphite lubricant
GOST 3475-81: Automatic coupler equipment of railway rolling stock for railway track gauge 1520 (1524) mm. Assembling dimensions
GOST 380-94: Normal quality carbon steel
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7409-90: Main line freight cars for 1520 mm gauge. Specifications for the development of paint coating technologies
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 9246-79: Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
GOST 9544-93: Pipeline cut-off valves
GOST 977-88: Steel castings. General specifications
The Document is Referenced By:
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
Tempered glass. Specifications.
Language: English |
Glass with low emissivity hard coating. Specifications.
Language: English |
Glass laminated. Specifications.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.