GOST 2930-62
ГОСТ 2930-62
|
|
Measuring instruments. Characters and signs
Приборы измерительные. Шрифты и знаки
Status: Superseded in part. Superseded from 01/01/1985 in terms of fonts for applying labels by the method of flat printing; from 01/01/1987 in the part of fonts for applying inscriptions by the method of non-flat printing (IUS 3-1986)
The standard applies to fonts and marks applied by various methods on dials and other parts of measuring instruments and their separate auxiliary parts, developed until January 1, 1987.
Стандарт распространяется на шрифты и знаки, наносимые различными методами на циферблаты и другие детали измерительных приборов и их отдельные ��спомогательные части, разработанные до 01.01.1987.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Committee of Standards, Measures and Measuring Instruments under the Council of Ministers of the USSR,
6/18/1962
SKU: RUSS20831
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.4 Instruments for electrical and magnetic measurements »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.1 Basic requirements for instruments and test equipment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P3 Instruments for electrical and magnetic measurements »
P30 Classification, nomenclature and general rules »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P0 General rules and regulations for instrument-making industry »
P04 Details and components of general application in instrument making »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION ��
Classification, nomenclature. Terms and Definitions. Designation »
National Standards for OKSTU »
SPECIAL PURPOSE INSTRUMENTS AND AUTOMATION »
Classification, nomenclature. Terms and Definitions. Designation »
As a Replacement Of:
GOST 2930-45: Instruments of electrical and heat engineering control. Fonts & Sizes for gauges. Types and sizes
The Document References:
GOST 12.4.026-76: Signal colors and safety signs
GOST 1845-59: Electrical measuring instruments. General technical requirements
GOST 22261-82: Means for measuring of electrical quantities. General technical specifications
GOST 3489.1-71: Printing types (russian and roman graphic bases). Group arrangement. Indexing. Base line. Characters per 4 picas
GOST 3489.32-71: Printing types. Type family 'Malanovskaya' (for russian alphabet). Range of application. Design. Base line. Characters per 4 picas
GOST 3489.33-72: Typographic fonts. Literature headset (for alphabets on Russian and Latin graphic bases). Purpose Picture. Font line. Capacity
GOST 3489.38-72: Printing types. Type family Rerberg (for alphabets of russian and roman graphic bases). Range of application. Design. Base line. Characters per 4 picas
GOST 3489-57: Printing types (Russian and roman graphic bases). Classification, indexation, assortment
GOST 6395-52: Signs of high electrical voltage. Dimensions
GOST 6636-60: Standard linear dimensions
GOST 6636-69: Standard linear dimensions
The Document is Referenced By:
GOST 10272-77: Double entry centrifugal pumps. Specification
GOST 10362-76: Pressure hoses of vulcanized rubber with thread reinforcement and without end fitting. Specifications
GOST 10807-78: Road signs. General specifications
GOST 11102-75: Acceptance and acting instruments and devices for diesel automation. Types, basic parameters and technical requirements
GOST 13384-81: Measuring transformers for thermocouple and resistance thermometers SSI. General technical conditions
GOST 15880-83: Electric drills
GOST 16024-79: Cryogenic vessels. Specification
GOST 16078-70: Tube connections on internal cone. Technical requirements
GOST 16965-71: Protection covers. General specifications
GOST 17017-71: Carbide tools for making holes in building materials. Technical requirements
GOST 17041-77: Rulers for drawing instruments. Specifications
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 17435-72: Drawing rulers. Specifications
GOST 18058-80: Three-phase asynchronous squirrel-cage submersible electric motors series ПЭД. Specifications
GOST 18176-79: Furniture of packing cases. Specifications
GOST 18620-86: Electrotechnical articles
GOST 18864-82: Drawing devices. Specification
GOST 19126-79: Metallic medical instruments
GOST 19323-73: Rubber protective caps. Construction and dimensions
GOST 2.109-68: Unified system for design documentation. Rules for the implementation of drawings of parts, assembly, general types, overall and mounting
GOST 20397-82: Technical facilities for minicomputers. General technical requirements, acceptance, methods of testing, marking, packaging, transportation and storage, manufacturer's warranties
GOST 21029-75: Aluminum barrels for chemical products
GOST 21185-75: Quasypeak level meters of the sound frequency electrical signals. Types, basic parameters and methods of testing
GOST 21339-75: Tachometers. General technical requirements
GOST 21339-82: Tachometers
GOST 21829-76: Man-machine system. Coding of visual information. General ergonomic requirements
GOST 22704-77: Rubber-fabric chevron seals for hydraulic units. Specifications
GOST 22853-86: Mobile buildings. General specifications
GOST 22902-78: Man-machine system. Reading device of visual display. General ergonomic requirements
GOST 23979-80: Subs for pump-and-compressor tubing
GOST 24318-80: Blocks of three-cassette press moulds for producing the rubber technical parts. Design and dimensions
GOST 24844-81: Dials and scales of pressure gauges, vacuum gauges, manometers, pressure gauges, pull gauges, for display and recording. Technical requirements. Marking
GOST 25088-81: Ship's doors. Specifications
GOST 25982-83: Stomatologic tips for a microdrive
GOST 26.008-85: Lettering for inscriptions applied by engraving method. Executive dimensions
GOST 26.020-80: Types for means of measuring and automation. Inscription and main dimensions
GOST 26141-84: Amplifiers of x-ray images for medical roentgen apparatuses
GOST 26153-84: One-column dividing stands
GOST 26155-84: Barrels from corrosion-resistant steel
GOST 26360-84: Searchlights for vessels
GOST 26368-90: Medical light fixtures
GOST 2645-71: Flying apparatus. Technical requirements for superscriptions. Assemblies coloration codes
GOST 26616-85: Sets of portable multi-impression press moulds for manufacturing of rubber u-packing seals. Design and dimensions
GOST 26887-86: Platforms and ladders for civil engineering work. Specifications
GOST 27735-94: Domestic scales
GOST 29329-92: Balance for static weightings
GOST 300-69: Curve meters
GOST 31.0151.01-90: Universal and special-purpose setters
GOST 32945-2014: Public roads. Road signs. Technical specifications
GOST 4666-2015: Pipeline accessories. Requirements for marking
GOST 4666-75: Valves. Marking and distinctive painting
GOST 5.1807-73: Type-ГИН-0,5-1М getter-ion pump. Quality requirements of certified products
GOST 5228-89: Rubber o-rings for the couplings of asbestos-cement pipes
GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements
GOST 5286-75: Tool joints for pipe drills
GOST 5365-83: Electrical measuring instruments. Dials and scales. General technical requirements
GOST 6047-90: General purpose floodlights
GOST 6051-76: Hollow rubberfabric gaskets. Specifications
GOST 6570-75: Electrical induction active and reactive energy meters. General technical specifications
GOST 6570-96: Electrical induction active and reactive energy meters
GOST 7921-86: Metal shot-gun cartridge-cases. Specifications
GOST 8.247-2004: State system for ensuring the uniformity of measurements. Sounding sticks for oil product level measuring in horizontal tanks. Calibration methods
GOST 8752-79: Metal insert rubber seals for rotating. Specifications
GOST 9031-75: Reference hardness standards
GOST 9413-78: Lighting panels for dwelling-houses. General specifications
GOST R 51265-2015: Appliances, apparatus and equipment for rehabilitation of individuals with disabilities. General technical requirements
GOST R 51265-99: Household appliances, apparatus and equipment for rehabilitation of individuals with disabilities. General technical requirements
GOST R 51632-2000: Technical aids for disabled persons. General technical requirements and test methods
GOST R 51632-2014: Technical aids for disabled persons. General technical requirements and test methods
GOST R 52290-2004: Traffic control devices. Traffic signs. General technical requirements
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 52916-2008: Stops of automatic coupler equipment for freight and passenger cars. General specifications.
GOST R 54322-2011: Aircraft. Symmetric clamps with liner and bonding strip. Design
GOST R 55473-2013: Gas distribution systems. Requirements for gas distribution networks. Part 1. Polyethylene gas pipelines
GOST R 55473-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 1. Polyethylene gas pipelines
GOST R 58872-2020: Marine cable lugs with flat clamping part for conductors up to 16 mm2. Technical requirements
GOST R 8.655-2009: State system for ensuring the uniformity of measurements. Quality factors of electric power measuring instruments. General specification
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
MI 1053-85: State system for ensuring uniformity of measurements. Planimeters Method of verification
MI 125-77: Method of calibration of ultrasound therapy apparatus
MI 316-83: State system for ensuring uniformity of measurements. Methodical instructions. Length vertical IZV-5. Methods and means of verification
ON 025 281-66*: Automotive rolling stock and engines. Nameplates. Marking. Dimensions and specifications
OST 26-04-2000-77: Plugs. Design and dimensions. Specifications.
OST 26-07-2024-80: Distinguishing plates. Dimensions. Technical requirements.
OST 32.48-95: Air reservoirs for traction rolling stock. Overall and mounting dimensions and technical requirements
P 60-77/VNIIG: Recommendations for aerodynamic design of vacuum pneumatic ash removal systems
PNAE G-7-030-91: Uniform control methods for basic materials (semi-finished materials), welded joints and welding on of equipment and pipelines of nuclear power plants. Ultrasonic testing. Part II. Weld examination
PNST 228-2017: Aviation equipment. Hydraulic systems. Straight, cross, triple, transitional and transitional connectors, under axial pressing for a pressure of 35 MPa. Specifications
RD 31.44.06-89: Low loader semi-trailers. Repair Specifications
RD 34.11.103-95: Recommended Practice for Compiling Index of Means of Measurement in Use at Electric Power Facilities to Monitor Process Parameters, for Which the Measurement Accuracy is not Standardized
RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
RM 4-107-82: Process automation systems. Requirements for the implementation of project documentation for boards and consoles
SP 42-103-2003: Design and construction of polyethilene gas pipelines and renovation of underground gas pipelines
ST RK 1454-2005: Air reservoir for traction railway stock. Basic requirements for structure
ST TsKBA 076-2009: Pipe fittings. Distinctive signs. Types, sizes and specifications
STB 1140-2013: Technical means of traffic management. Traffic signs. General specifications
TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions
TU 34-42-10656-84: Manual actuators for valves of dust and air and air ducts. Technical conditions
TU 36-1199-81: Slatted welded floor type "Visp". Technical conditions
TU 67-564-83: Swing gate type of GRP. Technical conditions
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.