GOST 12.0.005-2014

ГОСТ 12.0.005-2014

System of labor safety standards Metrological support in the field of occupational safety. The main provisions

Система стандартов безопасности труда. Метрологическое обеспечение в области безопасности труда. Основные положения

Status: Effective - Supersedes. IUS 5-2016

The main purpose of the standard is to ensure the uniformity of measurements in the process of monitoring the parameters that determine the state of working conditions from a position of occupational safety. The standard establishes the main provisions and requirements of the metrological assurance of measurements carried out in order to monitor compliance with the established requirements and standards in the field of occupational safety of all types of economic activity. The standard is used in the development of regulatory documents in terms of establishing monitored quantities, measuring instruments and methods (methods) for carrying out measurements used to assess (monitor) the state of working conditions and ensure occupational safety, as well as when organizing the SI metrological service. When conducting any type of conformity assessment in the field of occupational safety and health, the compliance with the requirements laid down in this standard should be verified.

Основным назначением стандарта является обеспечение единства измерений в процессе контроля параметров, определяющих состояние условий труда с позиции безопасности труда. Стандарт устанавливает основные положения и требования метрологического обеспечения измерений, выполняемых с целью контроля выполнения установленных требований и норм в области безопасности труда всех видов экономической деятельности. Стандарт применяют при разработке нормативных документов в части установления контролируемых величин, средств измерений и методик (методов) выполнения измерений, применяемых для оценки (мониторинга) состояния условий труда и обеспечения безопасности труда, а также при организации метрологического обслуживания СИ. При проведении любых видов оценки соответствия в области безопасности труда должна осуществляться проверка выполнения требований, изложенных в настоящем стандарте.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 20

Approved: Federal Agency for Technical Regulation and Metrology, 9/23/2015

SKU: RUSS208323

Price: $270.63

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 1 General occupational safety requirements »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.100 Safety of professional activity. Industrial hygiene »

As a Replacement Of:

GOST 12.0.005-84: Occupational safety standards system. Metrological support of occupational safety. General

The Document References:

GOST 30630.1.6-2013: Test methods for resistance to mechanical external influencing factors for machines, instruments and other industrial products. Tests of electrical terminals, fittings and other connecting parts to the impact of bending, torque, tensile and compressive forces

GOST 8.009-84: State system for ensuring the uniformity of measurements. Standardized metrological characteristics of measuring instruments

GOST 8.010-2013: State system for ensuring the uniformity of measurements. Procedures of measurements. Main principles

GOST 8.315-97: Standard samples for composition and properties of substances and materials

GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities

GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories

GOST R 1.6-2013: Standardization in the Russian Federation. Draft standards. Rules of organization and realization of expertise

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles

MI 2427-97: Measurements Assessment of Status of Measurements in Test and Measurement Laboratories

PMG 06-2001: Procedure for recognition of test results and type approval, calibration, metrological certification of measuring instruments

PMG 96-2009: State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality

PR 50.2.006-94: Procedure for calibration of measurement equipment

PR 50-732-93: Metrological service of the public administration of the Russian Federation and legal entities.

RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions

RMG 63-2003: State system for ensuring the uniformity of measurements. Providing measurement efficiency in control of technological processes. Metrological expertise of the technical documentation

Federal Law 426-FZ: On a special assessment of working conditions

The Document is Referenced By:

GOST 8.321-2013: State system for ensuring the uniformity of measurements. Industrial application level gauges. Calibration methods

GOST R 58274-2018: Space systems. Metrological provision of technological preparation of production. Main provisions

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40
Atom stations. Equipment, instruments, means of monitoring and control systems. General technical requirements
Language: English
Price: $1,146.54
System of design documents for construction. Basic requirements for design and working documentation
Language: English
Price: $867.18
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Non-destructive Testing. Welded Joints. Ultrasonic Methods
Language: English
Price: $140.58
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Compilation and execution of safety data sheet of chemical products
Language: English
Price: $175.23
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20


RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!