GOST 3845-75
ГОСТ 3845-75
|
|
Metallic tubes. Hydraulic pressure testing method
Трубы металлические. Метод испытания гидравлическим давлением
Status: Not effective - Superseded. Registration information 165-st dated 03/21/2017 (Rosstandart official website); IUS 7-2017
The standard applies to pipes made of steel, cast iron, non-ferrous metals and establishes a method of testing them with internal hydraulic pressure to check the strength and density of the base metal of pipes and welds.
Стандарт распространяется на трубы из стали, чугуна, цветных металлов и устанавливает метод испытания их внутренним гидравлическим давлением для проверки прочности и плотности основного металла труб и сварных швов.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
12/30/1975
SKU: RUSS20835
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V6 Pipes metal and pipe products »
V69 Test methods. Packaging. Marking »
National Standards for OKSTU »
PRODUCTS OF ELECTRODE AND CARBIDE INDUSTRY. PRODUCTS FROM NON-FERROUS METALS »
Control methods (testing, analysis, measurements) »
The Document is Replaced With:
GOST 3845-2017: Metallic pipes. Internal hydrostatic pressure testing method
As a Replacement Of:
GOST 3845-65: Tubes. The method of testing by hydraulic pressure
The Document is Referenced By:
GOST 10092-2006: Cupro-nickel tubes for heat-exchange apparatus. Specifications
GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications
GOST 10498-63: Pipes seamless extra-thin-walled from corrosion-resistant (stainless) steel. Specification
GOST 10498-82: Seamless extra thin-walled tubes of corrosion-resistant steel
GOST 1060-76: Seamless steel pipes, cold-deformed for shipbuilding. Specification
GOST 1060-83: Steel seamless cold-formed tubes for shipbuilding
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions
GOST 11017-80: High-pressure seamless steel pipes
GOST 11068-64: Tubes of stainless steel, electro welded
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11249-80: Steel rolled up soldered double-layer tubes
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 13663-68: Shaped steel pipes technical requirements
GOST 13663-86: shaped steel pipes technical requirements
GOST 17217-79: Copper-nickel alloyed tubes grade Mnzh 5-1
GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 20295-74: Steel welded pipes for main gas and oil pipelines
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 21053-75: Pipes, cast iron, under pressure with a butt joint for rubber sealing cuffs
GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications
GOST 21646-76: Brass tubes for heat exchange apparatus
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 21945-76: Seamless hot-rolled pipes from titanium-based alloys
GOST 22786-77: Bimetallic weldless tubes for shipbuilding
GOST 22897-77: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 22897-86: Seamless cold-deformed pipes from alloys based on titanium. Specifications
GOST 23697-79: Longitudinal welded tubes from aluminium alloys
GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry
GOST 24890-81: Welded titanium and titanium alloys pipes
GOST 26582-85: Food (manufacturing) industry machines and equipment
GOST 27962-88: Industrial equipment
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32598-2013: Tubes copper round for water and gas. Specifications
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 32931-2015: Profile steel pipes for metal constructions. Specifications
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C
GOST 494-2014: Brass tubes. Specifications
GOST 494-90: Pipes of brass
GOST 5005-65: Steel electric welded pipes for camshafts
GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts
GOST 5466-74: Soil transfering pipes
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5525-88: Cast-iron connecting parts for pipelines manufactured by casting into sandy moulds
GOST 5654-76: Steel seamless hot-shaped pipes for shipbuilding
GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications
GOST 617-90: Copper tubes. Specifications
GOST 7909-56: Drill prospecting pipes and coupling to them
GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
GOST 9583-75: Cast-iron pressure pipes, manufactured by methods of centrifugal and semicontinuous casting
GOST 9940-72: Seamless hot deformed tubes made of corrosion resistant steel
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel
GOST R 51573-2000: Tubes from alloyed brasses for heat-exchange apparatus. Specifications
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52318-2005: Round copper tubes for water and gas. Specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 54086-2010: Pressure regulators. General specifications
GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications
GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54568-2011: Tubes from alloy МНЖ5-1. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
Manual: Manual for impulse and low consumption fire extinguishing systems
Manual for SNiP 2.04.02-84: A guide for the design of water supply and sanitation in difficult engineering and geological conditions. T-3083
Manual for SNiP 2.04.02-84: Design Guide for Surface Water Abstraction Facilities
Manual for SNiP 2.04.02-84: Design Guide for Groundwater Abstraction
Manual for SNiP 2.04.02-84: Manual for the protection of the inner surface of steel pipes from corrosion (to SNiP 2.04.02-84)
Manual for SNiP 2.04.02-84: Drawing up the technical and economic part of the off-site water supply and sewage systems projects. Reference manual to SNiP
Manual for SNiP 2.04.02-84: A guide to designing automation and dispatching water systems
Manual for SNiP 2.04.02-84: Cooling Tower Design Guide
Manual for SNiP 2.04.02-84: Manual for the design of facilities for water treatment and treatment
Manual for SNiP 2.04.02-84: Design of facilities for sludge dewatering of natural water treatment plants
Manual for SNiP 2.04.02-84: Allowance for the volume and content of technical documentation for off-site water supply and sewage systems
Manual for SNiP 2.04.02-84: A guide to determining the wall thickness of steel pipes, the selection of grades, groups and categories of steels for external water supply and sewage networks
OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification
OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.
OST 26-01-1183-82: Aluminium vessels and devices. General technical specifications.
OST 26-02-1015-85: Tube fastening to tube sheets.
R 51-31323949-58-2000: Guidelines for the Application of Steel Pipe in the Oil and Gas Industry
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)
RD 5.0679-91: Certification of welders and gas cutters. rules
RD RosJeK 05-014-98: Guidelines for expert examination of pipelines of steam and hot water of category IV, supervised by the Gosgortekhnadzor of Russia
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
SNiP 3.05.03-85: Heat networks
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
SP 36.13330.2012: Trunk pipelines
TU 102-488.1-05: Connecting details and nodes of main pipelines on Рр up to 10 MPa (100 kgf
TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions
TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines
TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T
TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC
TU 1317-233-0147016-02: Seamless hot-deformed oil and gas pipes of increased reliability during operation for the fields of OAO Tomskneft VNK
TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa
TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields
TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines
TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields
TU 14-161-184-2000: Steel seamless tubes of steel grade 09G2S
TU 14-162-14-96: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions
TU 14-3-1401-86: Seamless cold-deformed pipes of steel grade 02Х18Н11
TU 14-3-1428-86: Electric-Welded Straight-Seam Steel Pipes 1020 mm in Diameter for Gas and Oil Pipelines. Technical Specifications
TU 14-3-1573-96: Steel electric welded longitudinal pipes with a diameter of 530-1020 mm with a wall thickness of up to 32 mm for main gas pipelines, oil pipelines and oil product pipelines
TU 14-3-1698-2000: Steel electric-welded longitudinal pipes with a diameter of 1020, 1220 mm for gas and oil pipelines
TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision
TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines
TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions
TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines
TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions
TU 14-3-808-78: Spiral-welded electrowelded carbon steel pipes 20 for pipelines of nuclear power plants
TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions
TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions
TU 14-3R-1471-2002: Northern-straight-seam electric-welded pipes for arranging oil and gas fields, main gas pipelines, oil and oil product pipelines of field pipelines. Technical specifications
TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions
TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)
TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions
TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines
TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
TU 14-3R-62-2002: Seamless hot-deformed steel pipes made of 15X5M steel for the petroleum refining industry. Technical conditions
TU 1468-010-593377520-2003: Seamless steel welded joints for pipelines, of increased operational reliability, intended for the field construction of OAO TNK
TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications
VSN 39-87: Ordinance for Planned Preventive Maintenance and Operation of Production Equipment at Construction Industry Companies Administered by the USSR Gosagprom. Part 1
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.