GOST 7565-81

ГОСТ 7565-81

Iron, steel and alloys. Sampling for determination of chemical composition

Чугун, сталь и сплавы. Метод отбора проб для определения химического состава

Status: Effective. The limitation of effectiveness has been lifted: Resolution of the State Standard No. 879 dated 06/17/91

The standard establishes a method of sampling and sample preparation for determining the chemical composition of blast iron, steel, alloys and finished rolled products.

Стандарт устанавливает метод отбора и подготовки проб для определения химического состава доменного чугуна, стали, сплавов и готового проката.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 12/30/1981

SKU: RUSS20842




Price: request_a_quote

The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.080 Ferrous metals » 77.080.01 Ferrous metals in general »

National standards » 77 METALLURGY » 77.080 Ferrous metals » 77.080.01 Ferrous metals in general »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » CAST IRON, FERRO ALLOYS, STEEL » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 7565-73: Steel and alloys. Sampling for determination of chemical composition

The Document is Referenced By:

GOST 10160-75: Magnetically soft precision alloys

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10533-86: Cold-rolled thermostatic bimetal strip

GOST 10543-82: Surfacing steal wire. Specifications

GOST 10543-98: Steel surfacing wire. Specifications

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10791-2011: All-rolled wheels. Specifications

GOST 10791-89: Solid rolled wheels

GOST 10884-81: Heat strengthened steel bars of periodical section for concrete reinforcement. Technical requirements

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 10994-74: Precision alloys. Grades.

GOST 11017-80: High-pressure seamless steel pipes

GOST 11036-75: Electrotechnical quality unalloyed steel. Specifications

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 11249-80: Steel rolled up soldered double-layer tubes

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11474-76: Bent-steel sections. Specifications

GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12351-2003: Alloyed and highalloyed steels. Methods for determination of vanadium

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 12361-2002: Alloyed and highalloyed steels. Methods for determination of niobium

GOST 12492.0-90: Rolled stock for agriculture machinery

GOST 12766.1-90: High electrical resistant wire made of precision alloys

GOST 12766.2-90: Strip from precision high electric resistance alloys

GOST 12766.3-90: Precision gauged alloys of high electric resistance

GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance

GOST 12766.5-90: Flattened strip of high electric resistance precision alloys

GOST 13663-86: shaped steel pipes technical requirements

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14118-85: Wire made of precision alloys, designed for elastic elements

GOST 14119-85: Rods from precision alloys for elastic elements

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 1435-74: Non-alloyed tool steel. Specification

GOST 1435-90: Unalloyed tool steel bars, strips and coils

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14637-79: Rolled thick-plate and wide-band universal of carbon steel for general use. Specification

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications

GOST 1577-81: Rolled sheets and wide strips of structural quality steel. Specifications

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 1585-85: Bearing cast iron for molding

GOST 15891-70: Hot-rolled fashioned strip two layered steel for plough-shares. Specifications

GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 17066-80: Low-alloyed structural steel sheets and strips in coils. Marks and technical requirements

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 17152-89: Steel hot-rolled shapes for cutting blades of earth-moving machines. General specifications

GOST 17745-90: Steels and alloys. Methods for determination of gases

GOST 18143-72: Corrosion resistant

GOST 18232-83: Guard rails. Specifications

GOST 18267-82: Railway rails, types р50, р65, and р75 for wide-gage railways, heat-treated by through hardening in oil

GOST 18834-83: Magnetic wire for recording harmonic signals

GOST 18895-81: Steel. Method of photoelectric spectral analysis

GOST 18895-97: Steel. Method of photoelectric spectral analysis

GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel

GOST 19265-73: Bars and strips out of high-speed steel. Specifications

GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-73: Low alloyed sorted and shaped steel

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel

GOST 20072-74: Heat-resistant steel

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 21022-75: Chromic steel for precise bearings. Specifications

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.

GOST 22253-76: Friction draft gears for 1520 mm gauge railway rolling stock. Specifications

GOST 22366-93: Iron-based sintered filler ribbon electrode

GOST 2246-70: Welding steel wire. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 23270-89: Tube-billets for machining

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 23979-2018: Subs for casing and tubing. Specifications

GOST 24018.0-90: Nickel-based high-temperature strong alloys

GOST 24018.7-91: Nickel-based fire-resistant alloys. Methods for the determination of carbon

GOST 24018.8-91: Nickel-based fire-resistant alloys. Methods for the determination of sulphur

GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications

GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications

GOST 24244-80: Cold-rolled soft thin sheet steel for enameled utensils

GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys

GOST 25054-81: Forgings made of corrosion-resistant steels and alloys

GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification

GOST 26131-84: Heat-resisting steel forgings. General specifications

GOST 26250-84: Drill pipes for borehole tools with retrievable core

GOST 27611-88: Cast iron. Photoelectrical special method of analysis

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 27809-88: Steel and cast iron. Methods of spectroorganic analysis

GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis

GOST 28033-89: Steel. Method of X-ray-fluorescent analysis

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 30136-95: Carbon steel rod of ordinary quality. Technical specifications

GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30564-98: Seamless hot-worked carbon and alloy steel pipes and tubes with special properties. Specifications

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST 31443-2012: Steel pipes for crafts pipelines. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31569-2012: Corrosion-resistant (stainless) steel billets for cast dentures of orthopedic dentistry. General specifications

GOST 31570-2012: Nickel-base alloy billets for orthopedic dentistry. General specifications

GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications

GOST 31623-2012: XK62M6L alloy cast rods for artificial joints. Specifications

GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31627-2012: Corrosion-resistant cobalt-base alloy billets for orthopedic stomatology. General specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

GOST 32409-2013: Spring anchors to railway rails. Technical specification

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 3281-93: Axles for 1520 (1,524) mm gauge railway locomotives

GOST 32931-2015: Profile steel pipes for metal constructions. Specifications

GOST 33184-2014: Joint bars for rails of gauge railway. Specifications

GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33229-2015: Tubes for boiler and heat exchanging equipment. Technical specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 C

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications

GOST 34385-2018: Axle-boxes and adapters for wheelsets of freight wagon bogies. General specifications

GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods

GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications

GOST 34468-2018: Pyatniki freight cars of 1520 mm gauge railways. General technical conditions

GOST 34503-2018: Wedges friction trolleys of freight cars. General specifications

GOST 34636-2020: Pipe billet. General specifications

GOST 34697-2020: End and release valves. General specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 380-88: Common quality carbon steel. Grades

GOST 380-94: Normal quality carbon steel

GOST 3836-83: Unalloyed thin sheet and band steel for electric engineering purposes

GOST 398-2010: Rough tyres for railway rolling stock. Specifications

GOST 398-81: Carbon steel tires for rolling stock for broad gauge railways. Technical requirements

GOST 4008-89: Axles of full gauge railway cars. Specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4041-71: Rolled plates of high quality structural steel for cold stamping

GOST 4121-76: Crane rails. Specifications

GOST 4121-96: Crane rails. Specifications

GOST 4133-73: Fishplates for wide gauge railway track

GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications

GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 4728-89: Shaft blanks for the rolling stock of the railroads with 1520 mm wide track

GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge

GOST 4781-85: Hot-rolled steel shapes for sheet piles. Specifications

GOST 4832-80: Foundry pig-iron

GOST 4832-95: Foundry pig iron. Specifications

GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel

GOST 5005-82: Electric-welded cold-worked steel pipes for cardan shafts

GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements

GOST 5257-89: Rough carbon steel tires for tramway rolling stock

GOST 5257-98: Rough carbon steel tyres for tramway rolling stock. Specifications

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 5286-2022: Screw-in steel pipe clamps for drill pipes. General technical requirements

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5497-80: Cold-rolled steel strip for saws of cotton-scrubbing machines

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5521-86: Weldable steel for shipbuilding

GOST 5521-93: Shipbuilding rolled steel

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5876-82: Types P18 and P24 narrow-gauge railway rails

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications

GOST 5950-73: Bars and strips from a toolhouse steel alloy

GOST 6009-74: Hot-rolled steel strip. Specifications

GOST 6238-77: Casing pipes and core barrels for prospecting drilling and nipples to them

GOST 631-75: Upset drill pipes with couplings

GOST 632-80: Casing pipes and couplings for them. Specifications

GOST 633-80: Oil well tubing and tubing couplings

GOST 6690-83: Axes for metro carriages. Specifications

GOST 6713-75: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 6765-75: Hot rolled three-layer steel and wide steel strip (universal). Specifications

GOST 6856-54: Steel tubes

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7360-2015: Drill-stem subs. Technical specification

GOST 7370-2015: Railway frogs. Specifications

GOST 7370-86: Railway frogs of types R75, R65 and R50

GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications

GOST 7769-82: Alloyed cast iron for castings with special properties

GOST 7909-56: Drill prospecting pipes and coupling to them

GOST 801-2022: Rolled bearing steel. Technical conditions

GOST 801-78: Bearing steel. Specifications

GOST 803-81: Hot-rolled strips of carbon high-grade steel for plating

GOST 805-80: Conversion pig iron

GOST 805-95: Steelmaking pig iron. Specifications

GOST 8141-56: Fasteners for narrow gauge railways. Fishplates. General specifications

GOST 8142-89: Rail soles for R18, P24, P33 rail types

GOST 8467-83: Steel drill pipes with

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8696-74: General-purpose electrically welded spiral seam steel pipes. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications

GOST 8803-89: Round finer wire made of precision alloys with high electrical resistivity for resistive elements

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9124-85: Binding tin-coated steel wire

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

GOST 977-88: Steel castings. General specifications

GOST 9941-2022: Cold-deformed seamless pipes made of corrosion-resistant high-alloy steels. Technical conditions

GOST 9960-85: Point blade rails

GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure

GOST R 50278-92: Drill pipes with weld-on tool joints. Specifications

GOST R 50566-93: Steel wire for mechanical springs. General requirements

GOST R 51013-97: Nickel based fire-resistant, corrosion-resistant, precision alloys. Methods for titanium determination

GOST R 51045-2014: Rails of ways technological railways transport. General specifications

GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications

GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications

GOST R 51245-99: Steel universal drill rods. General specifications

GOST R 51381-99: Corrosion-resistant cobalt-base alloy billets for orthopaedic stomatology. General specifications

GOST R 51393-99: Corrosion-resistant steel cold rolled sheets and decks cold-shaped sections for carriage building. Specifications

GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications

GOST R 51395-99: ХК62М6Л alloy cast rods for artificial joints. Specifications

GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 51682-2000: Casing and coring tubes for geology-exploring drilling. Specifications

GOST R 51685-2000: Railway rails. General specifications.

GOST R 51685-2013: Railway rails. General specifications.

GOST R 51713-2001: Ingots of ferrous and non-ferrous metals. Permissible levels of specific activity of the radionuclides. Method of radiation control

GOST R 51767-2001: Nickel-base alloy billets for orthopaedic dentistry. General specifications

GOST R 51924-2002: Double tube core barrel for exploration drilling. General technical specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52203-2004: Tubing and coupling. Specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 52942-2008: Railway applications. Axles. Product requirements.

GOST R 53129-2008: Corrosion-resistant (stainless) steel billets for cast dentures of orthopaedic dentistry. General specifications

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications

GOST R 53866-2010: Crane rails. Specifications

GOST R 53932-2010: Tube billet. General specifications

GOST R 54153-2010: Steel. Method of atomic emission spectral analysis

GOST R 54157-2010: Profile steel pipes for metal constructions. Specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54864-2016: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54908-2012: Heat-resistant steel metal products. Specifications

GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55080-2012: Cast iron. Method of X-ray fluorescence (XRF) analysis

GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods

GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications

GOST R 55442-2013: Tubes for boiler and heat exchanging equipment. Specifications. Part 1. Seamless steel pipes to work under pressure not more than 6,4 MPa and at temperatures not exceeding 400 °C

GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements

GOST R 55497-2013: Check railway rails. Specifications

GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications

GOST R 55820-2013: Switch and crossing rails. Specifications

GOST R 55941-2014: Grooved rails. Specifications

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56354-2015: Cold formed sheet piling of non alloy steels. Specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications

GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications

GOST R 57430-2017: Pipes, fitting from ductile iron with spherical graphite and their connections for trade oil pipelines. Specifications

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 58064-2018: Steel welded pipes for building structure. Technical specifications

GOST R 58177-2018: United power system and isolated power systems. Thermal power plants. Thermal-mechanical equipment of thermal power plants. Control of condition of metal. Norms and requirements

GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications

GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions

GOST R 70731.1-2023: Steel pipes for manufacturing of equipment and pipelines for nuclear power plants. General specifications. Part 1. Seamless steel pipes of non-alloy and alloy steels.

GOST R ISO 5832-9-2009: Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.030.113-87: Carbon and alloy steel forgings for thermal and nuclear power stations equipment and pipelines. Technical specifications.

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 108.958.04-85: General-purpose forgings for turbines and compressors. Specification.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 3-1686-90: Billets made of structural steel for engineering. General Specifications.

OST 35-22-83: Pipe culverts made of corrugated metal intended for railroad and auto road. Specifications.

OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.

PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control

PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels

PNST 453-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 2. Seamless steel pipes of austenitic steel grades 08Х18Н10Т and 08Х18Н10Т-Ш

PNST 454-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 3. Longitudinal welded steel pipes of unalloyed and alloyed steel

PNST 455-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of austenitic steel grade 08Х18Н10Т

PNST 456-2020: Steel pipes for the manufacture of equipment and pipelines for nuclear power plants. General technical conditions. Part 5. Longitudinal welded cold-worked steel pipes of austenitic class steel

PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures

PNST 605-2022: Oil and gas industry. Underwater production systems. Teleoperated unmanned underwater vehicles tools and their interfaces

PNST 683-2023: Oil and gas industry. Underwater production systems. Tubes from austenitic-ferritic corrosion-resistant steel. Technical specifications

PNST 692-2022: Oil and gas industry. Underwater production systems. Wellhead equipment. Plugging module

RD 09-244-98: Instructions for diagnostics of technical condition of vessels, pipes and compressors, industrial ammonia refrigeration plants.

RD 10-112-2-09: Methodological guidelines for expert examination of hoisting equipment. Part 2: General purpose boom cranes and articulated hoisting cranes.

RD 10-112-3-97: Procedural Guidelines for Inspection of Hoisting Machinery with Expired Service Life. Part 3: Non-Self-Propelled Tower and Boom Cranes, and Derrick Cranes and Timber-Handling Cranes

RD 10-112-5-97: Methodological guidelines on inspection of hoisting equipment with expired service life. Part 5: Bridge and frame cranes.

RD 10-112-6-03: Guidelines for the inspection of special metallurgical cranes

RD 153-34.1-21.530-99: Procedural Guidelines for Inspection of Structural Elements of Process Buildings and Structures of Thermal Power Stations. Part 2: Metal Structures

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD 26.260.16-2002: Expert technical diagnostics of vessels and equipment operating under pressure at gas and gas condensate and oil production and processing facilities in the northern regions of the Russian Federation and underground gas storage facilities

RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements

RD 34.17.414-95: Procedural Guidelines for Chemical and Physical Chemical Phase Analysis of Metal in Thermal Power Station Electrical Equipment

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD EO 0505-03: Instructions for metal styloscope

RD RTM 26-362-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of iron and steel

RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource

RDM 929-01-93: Certificate for measuring the mass fraction of carbon by the gas-exchange method in cast iron of unalloyed, carbon, alloyed and high-alloyed steel when controlling starting materials

RDM 929-02-93: Certificate for the method of measuring the mass fraction of sulfur in the cast iron of unalloyed, carbon, alloyed and high-alloyed steel in the control of raw materials

RDM 929-03-93: Certificate for the method of measuring the mass fraction of phosphorus in unalloyed iron, carbon, alloyed and high alloyed steel in the control of raw materials

RDM 929-04-93: Certificate of measurement of the mass fraction of manganese in carbon steels and unalloyed iron in the control of raw materials

RDM 929-05-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-06-93: Certificate for the method of measuring the mass fraction of manganese in alloyed steels under the control of raw materials

RDM 929-07-93: Certificate for the method of measuring the mass fraction of manganese by the titrimetric method with a cobalt-copper catalyst in carbon steel in the control of raw materials and finished products

RDM 929-08-93: The certificate on the method of measurement of the chromium mass fraction by the titrimetric method in alloyed and high-alloyed steel not containing vanadium

RDM 929-09-93: The certificate on a technique of performance of measurements of a mass fraction of chrome a titrimetric method in the alloyed and high-alloyed steel

RDM 929-10-93: Certificate for the method of measuring the mass fraction of chromium in carbon steel in the control of raw materials and finished products

RDM 929-11-93: Certificate for the method of measuring the mass fraction of silicon in unalloyed iron and carbon steel in the control of raw materials

RDM 929-12-93: Certificate for the method of measuring the mass fraction of silicon in alloyed, high-alloy steel in the control of raw materials

RDM 929-13-93: Certificate for the method of measuring the mass fraction of nickel in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-14-93: Certificate for the method of measuring the mass fraction of titanium in alloyed, high-alloyed steel when controlling starting materials

RDM 929-15-93: Certificate for the method of measuring the mass fraction of copper in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-16-93: Certificate for the method of measuring the mass fraction of zirconium in steel, alloyed and high-alloyed in the control of raw materials and finished products

RDM 929-17-93: The certificate on the method of measuring the mass fraction of molybdenum in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-18-93: Certificate for the measurement of the mass fraction of vanadium in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-19-93: The certificate on the method of measuring the mass fraction of aluminum in carbon, alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-20-93: Certificate for the method of measuring the mass fraction of tungsten in alloyed and high-alloyed steel in the control of raw materials and finished products

RDM 929-21-93: The certificate on the method of measuring the mass fraction of niobium in alloyed and high alloyed steels under the control of raw materials and finished products

RDM 929-22-93: Certificate for the method of measuring the mass fraction of cerium in carbon steel in the control of raw materials and finished products

RDM 929-23-93: The certificate on the method of measuring the mass fraction of carbon by coulometric method in carbon alloyed and high-alloy steel

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RTM 1652-9-89: Guide to engineering survey, assessment of the quality and reliability of building structures of buildings and structures

SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90

SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 050-2008: Pipe fittings. Castings from cast iron. Technical requirements

ST TsKBA 051-2008: Pipe fittings. Castings from non-ferrous alloys. Technical requirements

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures

TU 13.03-011-00212179-2003: Spiral-welded electric-welded pipes made of carbon steel 20 for pipelines of nuclear power plants. Technical conditions

TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T

TU 1317-006.1-593377520-2003: Steel seamless oil and gas pipelines of increased operational reliability for the field construction of TNK OJSC

TU 1381-003-47966425-2006: Steel electric-welded steel pipes with an outer diameter of 610 - 1420 mm for gas pipelines for operating pressures up to 9.8 MPa

TU 14-158-101-97: Seamless hot-deformed oil and gas pipes of increased cold resistance and corrosion resistance for OJSC "Surgutneftegas" fields

TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines

TU 14-159-1128-2008: Steel and seamless hot-deformed cold-resistant pipes for gas pipelines of gas-lift systems and arrangement of gas fields

TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-1128-82: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-190-2004: Seamless steel pipes for boiler plants and pipelines

TU 14-3-377-99: Steel welded longitudinal welded pipes for main gas and oil pipelines

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-3R-251-2007: Seamless steel pipes for chemical and petrochemical plants with conditional pressure Py = 19.6 - 98 MPa (200 - 1000 kgf/cm2)

TU 14-3R-44-2001: Seamless hot-deformed steel pipes for oil and gas pipelines. Technical conditions

TU 14-3R-50-2001: Steel pipes, seamless, hot-rolled, thick-walled, of cast ingot

TU 14-3R-51-2001: Seamless steel pipes, hot-rolled, thick-walled for mechanical engineering

TU 14-3R-53-2001: Seamless mechanically machined steel pipes for steam pipelines

TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

TU 14-3R-56-2001: Welded steel pipes with a diameter of 1420, 1620, 1720, 2020 and 2220 mm for general use. Technical conditions

TU 14-3R-62-2002: Seamless hot-deformed steel pipes made of 15X5M steel for the petroleum refining industry. Technical conditions

TU 3-1002-77: Corrosion-resistant high-strength spring wire

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

VSN 136-78/Mintransstroj: Instructions for the design of auxiliary structures and devices for the construction of bridges

Customers Who Viewed This Item Also Viewed:

Loads and impacts
Language: English
Price: $306.00
Pipeline valves. Methods of control and testing
Language: English
Price: $417.00
Power convertors railway rolling stock. Characteristics and test methods
Language: English
Price: $447.00
Static non-tractive converters for railway rolling stock. General specifications
Language: English
Price: $261.00
Steel grinding balls for ball mills. Specifications.
Language: English
Price: $217.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $67.00
Three-phase asynchronous motors. General specifications.
Language: English
Price: $397.00
Occupational safety stаndards system. Vibration safety. General requirements
Language: English
Price: $178.00
Rotating electrical machines. Rating and performance
Language: English
Price: $518.00
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $261.00
State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
Language: English
Price: $240.00
Rotating electrical machines. Noise limits
Language: English
Price: $138.00
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $147.00
Centrifugal pumps. Technical specifications. Class I
Language: English
Price: $543.00
Rotodynamic pumps. Test methods
Language: English
Price: $659.00
Construction in seismic regions
Language: English
Price: $553.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!