GOST R IEC 60332-1-3-2007
ГОСТ Р МЭК 60332-1-3-2007
|
|
Tests on electric and optical fiber cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
Испытания электрических и оптических кабелей в условиях воздействия пламени. Часть 1-3. Испытание на нераспространение горения одиночного вертикально расположенного изолированного провода или кабеля. Проведение испытания на образование горящих капелек/частиц
Status: Not effective - Canceled. Registration information 1427-st dated 12/13/2011
This standard establishes a test method for assessing the degree of formation of falling burning droplets.
Настоящий стандарт устанавливает метод испытания для оценки степени образования падающих горящих капелек/частиц от одиночного вертикально расположенного электрического изолированного провода или кабеля или оптического кабеля в заданных условиях воздействия пламени
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/21/2007
SKU: RUSS20886
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.20 Cables »
National standards »
29 ELECTRICAL ENGINEERING »
29.060 Electrical Wires and Cables »
29.060.20 Cables »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E4 Electric cables, wires and cords »
E49 Test methods. Packaging. Marking »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R IEC 60332-1-1-2007: Tests on electric and optical fiber cables under fire conditions. Part 1-1. Test for vertical flame propagation for a single insulated wire or cable. Testing equipment.
GOST R IEC 60332-1-2-2007: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
The Document is Referenced By:
GOST IEC 60332-1-3-2011: Tests on electric and optical fibre cables under fire conditions. Part 1-3. Test for vertical flame propagation for a single insulated wire or cable. Procedure for determination of flaming droplets/particles
GOST R 50571.15-97: Electrical installations of buildings
GOST R 50571.29-2009: Electrical installations of buildings. Part 5-55. Selection and erection of electrical equipment. Other equipment
GOST R 53315-2009: Cable products. Requirements of fire safety
GOST R 53768-2010: Wires and cables for electrical equipment of rated voltages up to and including 450/750 V. General specifications
GOST R 53769-2010: Рower cables with plastic insulation for rated voltages of 0,66; 1 and 3 kV. General specifications
GOST R 55025-2012: Power cables with plastic insulation for rated voltages from 6 up to and including 35 kV. General specifications
GOST R EN 1710-2009: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST R IEC 60227-2-99: Polyvinylchloride insulated cables of rated voltages up to and including 450/750 V. Part 2. Test methods
GOST R IEC 60227-6-2010: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 6. Lift cables and cables for flexible connections
GOST R IEC 60227-7-98: Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Part 7. Screened and unscreened flexible cables with two or more conductors
GOST R IEC 60332-1-2-2007: Tests on electric and optical fibre cables under fire conditions. Part 1-2. Test for vertical flame propagation for a single insulated wire or cable. Procedure for 1 kW pre-mixed flame
GOST R IEC 60709-2011: Nuclear power plants. Instrumentation and control systems important for safety. Separation
GOST R IEC 60840-2011: Power cables with extruded insulation and their accessories for rated voltages above 30 kV (Um = 36 kV) up to 150 kV (Um = 170 kV). Test methods and requirements
GOST R IEC 62067-2011: Power cables with extruded insulation and their accessories for rated voltages above 150 kV (Um = 170 kV) up to 500 kV (Um = 550 kV). Test methods and requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
