GOST 11018-2011
ГОСТ 11018-2011
|
|
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Колесные пары тягового подвижного состава железных дорог колеи 1520 мм. Общие технические условия
Status: Effective - Supersedes. IUS 11-2012
The standard establishes requirements for the driving wheel pairs of locomotives (tenders), motor cars of motor-car rolling stock (traction rolling stock) of 1520 mm gauge railways of climate performance UHL according to GOST 15150.
Стандарт устанавливает требования к приводным колесным парам локомотивов (тендеров), моторных вагонов мотор-вагонного подвижного состава (тягового подвижного состава) железных дорог колеи 1520 мм климатического исполнения УХЛ по ГОСТ 15150.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/5/2012
SKU: RUSS20892
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
001/2011 TR TS. On safety of railway rolling stock »
Regulations and standards (to TR CU 001/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
002/2011 TR TS. On safety of high-speed rail »
Regulations and standards (to TR CU 002/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
003/2011 TR TS. On safety of railway infrastructure »
Regulations and standards (for TR CU 003/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.01 Rolling stock of railways in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D56 Automatic coupling and brake equipment »
As a Replacement Of:
GOST 11018-2000: Traction railway stock for 1520 mm gauge railways. Wheel sets. General specifications
The Document References:
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 10791-2011: All-rolled wheels. Specifications
GOST 11018-2000: Traction railway stock for 1520 mm gauge railways. Wheel sets. General specifications
GOST 11098-75: Gauge callipers with reading arrangement. Specifications
GOST 1129-2013: Sunflower oil. Specifications
GOST 12.0.003-74: Dangerous and harmful production effects. Classification
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 12503-75: Steel Methods of ultrasonic control. General requirements
GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications
GOST 15.101-98: System of product development and launching into manufacture. Procedure of scientific researches and development
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 20415-82: Non-destructive testing. Acoustic methods. General principles
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 2310-77: Steel bench hammers
GOST 23479-79: Non-destructive testing. Optic methods. General requirements
GOST 25346-89: Basic norms of interchangeability. Unified system of tolerances and fits. General, series of tolerances and fundamental deviations
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 30803-2002: Transmission tooth gears of the traction main railway stock . Specifications
GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications
GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications
GOST 31373-2008: Wheelsets of locomotives and motor-powered units. Strength calculations and tests
GOST 31536-2012: Wheelsets for the traction railway stock. Method of measuring electrical resistance
GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
GOST 3225-80: Rough tyres for locomotives of broad-gauge railways. Types and dimensions
GOST 398-2010: Rough tyres for railway rolling stock. Specifications
GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock
GOST 5000-83: Rough tyres for railway cars and tenders of 1520 mm gauge. Dimensions
GOST 5267.10-90: Section of tread rings. Dimensions
GOST 5791-81: Technical linseed oil. Specifications
GOST 7931-76: Natural drying oil
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 8989-73: Hempseed oil
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9378-93: Roughness comparison specimens
GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications
GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications
GOST R 52366-2005: Rough tyres for locomotives on broad gauge railways. Types and dimensions
GOST R 52920-2008: Wheelsets for the traction railway stock. Method of measuring the electrical resistance
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
SanPiN 2.2.4.548-96: Hygienic requirements to occupational microclimate
The Document is Referenced By:
FTS ZhT TsT 086-2002: Locomotives and wagon rolling stock. Composite finishing wheels and solid-rolled finishing wheels. Certification requirements
GOST 31536-2012: Wheelsets for the traction railway stock. Method of measuring electrical resistance
GOST 31666-2014: Diesel-multiple unit train. General technical requirements
GOST 31847-2012: Wheel sets for the special-purpose rolling stock. General specifications
GOST 32207-2013: Wheel for railway stock. Methods of residual stress determination
GOST 33200-2014: Axles for wheelsets of railway rolling stock. General specifications
GOST 33327-2015: Railway bus. General technical requirements
GOST 33783-2016: Wheeled pairs of railway rolling stock. Methods for determination of strength indicators
GOST 34650-2020: Solid-rolled wheels and wheelset tires for railway rolling stock. Non-destructive testing methods
GOST 34939-2023: Locomotives. Requirements for strength and dynamic qualities
GOST 4491-2016: Cast centers of wheels for railway rolling stock. General specifications
GOST 9238-2022: Dimensions of railway rolling stock and approximations of structures
GOST R 52366-2005: Rough tyres for locomotives on broad gauge railways. Types and dimensions
GOST R 55364-2012: Electric locomotives. General technical requirements
GOST R 55498-2013: Rolled wheel centres for railway rolling stock. Technical specifications
GOST R 56287-2014: Main-line liquefied natural gas turbine locomotives. General technical requirements
Customers Who Viewed This Item Also Viewed:
 |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.