imgalt

GOST IEC 60034-1-2014

ГОСТ IEC 60034-1-2014

Rotating electrical machines. Part 1. Nominal values of the parameters and operational performance

Машины электрические вращающиеся. Часть 1. Номинальные значения параметров и эксплуатационные характеристики

Status: Effective - Introduced for the first time. IUS 12-2015

Rotating electrical machines. Part 1. Nominal values of the parameters and operational performance

Вращающиеся электрические машины. Часть 1. Номинальные значения параметров и эксплуатационные характеристики

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 5/25/2015

SKU: RUSS209044

Price: $448.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 004/2011 TR CU. About safety of low voltage equipment » Regulations and standards (to TR CU 004/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.15 Testing and control of products of electronic, optical and electrical industry » 4.15.1 Electric machines, electrical equipment and materials »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines »

National standards » 29 ELECTRICAL ENGINEERING » 29.160 Electric rotating machines »


The Document References:

GOST 1494-77: Electrotechnics. Letter symbols for common quantities

GOST 18709-73: Rotating electrical machines of middle size. Mounting dimensions.

GOST 29322-92: Standard voltages

GOST 533-2000: Rotating electrical machinery. Turbo-generators. General specifications

GOST IEC 60027-4-2013: Letter symbols to be used in electrical technology. Part 4. Rotating electric machines

GOST IEC 60034-15-2014: Rotating electrical machines. Part 15. Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

GOST IEC 60034-18-1-2014: Rotating electrical machines. Part 18-1. Functional evaluation of insulation systems. General guidelines

GOST IEC 60034-18-21-2014: Rotating electrical machines. Part 1.8-21. Evaluation of functional parameters of insulation systems. Methods for testing winding coils of insulated wire. Evaluation of thermal characteristics and classification

GOST IEC 60034-18-22-2014: Rotating electrical machines. Part 18-22. Functional evaluation of insulation systems. Test procedures for wire-wound windings. Classification of changes and insulation component substitutions

GOST IEC 60034-18-31-2014: Rotating electrical machines. Part 1.8-31. Evaluation of functional parameters of insulation systems. Methods of test for winding template. Assessment and classification of insulation systems used in rotating machines by thermal characteristics

GOST IEC 60034-18-32-2014: Rotating electrical machines. Part 1.8-32. Evaluation of functional parameters of insulation systems. Methods of test for winding template. Evaluation of electrical durability

GOST IEC 60034-18-34-2014: Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems

GOST IEC 60034-5-2011: Rotating electrical machines. Part 5. Classification of protection degrees provided by the integral design of rotating electrical machines (IP code)

GOST IEC/TS 60034-18-33-2014: Rotating electrical machines. Part 1.8-33. Evaluation of functional parameters of insulation systems. Methods of test for winding template. Multifactor estimation of resistance of insulation systems under the joint influence of the thermal and electrical loads

GOST IEC/TS 60034-18-41-2014: Rotating electrical machines. Part 1.8-41. Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines powered by the voltage source converters

GOST IEC/TS 60034-18-42-2014: Rotating electrical machines. Part 1.8-42. Qualification and acceptance tests for electrical insulation systems resistant to partial discharge, type II, used in rotating electrical machines powered by the voltage source converters

GOST MEK 60335-1-2008: Household and similar electrical appliances. Safety. Part 1. General requirements

The Document is Referenced By:

GOST 16264.0-2018: Electric machines of low power. Engines General specifications

GOST 16264.1-2016: Induction motor. Part 1. General specifications

GOST 16264.2-2018: Synchronous motors. General specifications

GOST 16264.3-2018: Collector motors. General specifications

GOST 21558-2018: Excitation systems for turbogenerators, hydrogenerators and synchronous compensators. General specifications

GOST 28465-2019: Devices for cleaning windshields of the driver’s cab of traction rolling stock. General specifications

GOST 31606-2024: Electric rotating machines. Asynchronous motors with power from 0.12 to 400 kW inclusive. General technical requirements

GOST 31610.15-2014: Explosive atmospheres. Part 15. Equipment with type of protection

GOST 31610.19-2022: (IEC 60079-19:2019) Explosive atmospheres. Part 19. Running repair, overhaul and refurbishment of equipment

GOST 31610.7-2017: Explosive environments. Part 7. Equipment. Increased protection type "e"

GOST 33969-2016: Energy effectiveness. Pumping system energy assessment

GOST 34055-2016: Industrial fans. Performance testing of jet fans

GOST 34252-2017: Centrifugal hermetic pumps. Technical requirements. Class II

GOST 3618-2016: Stationary steam turbines for turbogenerators. Types and basic parameters

GOST 9630-2018: Three-phase asynchronous motors with voltages above 1000 V. General specifications

GOST IEC 60034-14-2014: Rotating electrical machines. Part 14. Mechanical vibration of certain machines with shaft heights 56 mm and higher. Measurement, evaluation and limits of vibration severity

GOST IEC 60034-18-1-2014: Rotating electrical machines. Part 18-1. Functional evaluation of insulation systems. General guidelines

GOST IEC 60034-18-21-2014: Rotating electrical machines. Part 1.8-21. Evaluation of functional parameters of insulation systems. Methods for testing winding coils of insulated wire. Evaluation of thermal characteristics and classification

GOST IEC 60034-18-32-2014: Rotating electrical machines. Part 1.8-32. Evaluation of functional parameters of insulation systems. Methods of test for winding template. Evaluation of electrical durability

GOST IEC 60034-18-34-2014: Rotating electrical machines. Part 18-34. Functional evaluation of insulation systems. Test procedures for form-wound windings. Evaluation of thermomechanical endurance of insulation systems

GOST IEC 60034-19-2017: Rotating electrical machines. Part 19. Specific test methods for d.c. machines on conventional and rectifier-fed supplies

GOST IEC 60034-2-1-2017: Rotary electric machines. Part 2-1. Standard methods for determining losses and efficiency for testing (with the exception of machines for rolling stock)

GOST IEC 60034-2-2-2014: Rotating electrical machines. Part 2.-2. Specific methods for the determination of specific losses of large machines by testing

GOST IEC 60034-28-2015: Electric rotary machines. Part 28. Test methods for determining the parameters of an equivalent circuit for replacing three-phase low-voltage asynchronous motors with a squirrel-cage rotor

GOST IEC 60034-30-1-2016: Rotating electrical machines. Part 30-1. Efficiency classes of line operated AC motors (IE code)

GOST IEC 60034-3-2015: Electric rotary machines. Part 3. Special requirements for synchronous generators driven by steam turbines and compressed gas turbines

GOST IEC 60034-9-2014: Rotating electrical machines. Part 9. Noise limits

GOST IEC 61800-5-1-2019: Variable speed electric power drive systems. Part 5-1. Safety requirements. Electrical, thermal and energy safety

GOST IEC/TS 60034-2-3-2015: Electric rotary machines. Part 2-3. Special methods for determining the loss and efficiency of AC induction motors powered by a converter

GOST IEC/TS 60034-25-2017: Rotary electric machines. Part 25. Electrical machines of alternating current used in power drive systems. Application guide

GOST IEC/TS 60034-31-2015: Electric rotary machines. Part 31. Selection of energy-efficient motors, including drives with speed control. Guidance on application

GOST ISO 3977-8-2017: Gas turbines. Procurement. Part 8. Inspection, testing, installation and commissioning

GOST ISO 8528-5-2017: Reciprocating internal combustion engine driven alternating current generating sets. Part 5. Generating sets

GOST R 55260.2.1-2022: Hydroelectric power plants. Hydrogenerators. Technical requirements for delivery

GOST R 56830-2015: Petroleum and natural gas industries. Electrical submersible pump units. General technical requirements

GOST R 57817-2017: Underground gas storage. Design standards

GOST R 57934-2017: Energy management systems. Guidance for the implementation, maintenance and improvement of an energy management system

GOST R 58787-2019: Electric generating sets with internal combustion engines for nuclear power plants. General technical conditions. Accommodation

GOST R 70381-2022: Refrigeration equipment. Air-cooled refrigeration condensers. Test conditions for determining the capacity

GOST R 70382-2022: Refrigeration equipment. Refrigerating air coolers with forced blowing. Test conditions for determining the capacity

GOST R 70940-2023: Electric rotating machines. Turbogenerators. General technical conditions

Letter 1681/05-SM: About the application of the standards

Order 1007: On Amendments to the List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of 22 July 2008 N 123-FZ "Technical Regulations on Fire Safety Requirements", approved by order of the Federal Agency for Technical Regulation and Metrology of 14 July 2020 N 1190

SP 423.1325800.2018: Electrical installations low-voltage buildings and structures. Explosion hazard design guidelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!