GOST 4784-97
ГОСТ 4784-97
|
|
Aluminium and wrought aluminium alloys. Grades
Алюминий и сплавы алюминиевые деформируемые. Марки
Status: Valid - Supersedes
The standard applies to aluminum and wrought aluminum alloys, intended for the manufacture of semi-finished products (tapes in rolls, discs, plates, bands, bars, profiles, tires, pipes, wires, forgings and stamped forgings) by hot or cold deformation, as well as slabs and ingots.
Стандарт распространяется на алюминий и деформируемыеалюминиевые сплавы, предназначенные для изготовления полуфабрикатов (лент в рулонах, кругов-дисков, плит, полос, прутков, профилей, шин, труб, проволоки, поковок и штампованных поковок) методом горячей или холодной деформации, а также слябов и слитков.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
12/8/1998
SKU: RUSS20945
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.3 Non-ferrous and precious metals »
ISO classifier »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.10 Aluminum and aluminum alloys »
National standards »
77 METALLURGY »
77.120 Non-ferrous metals »
77.120.10 Aluminum and aluminum alloys »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals »
V51 Non-ferrous metals, including rare, and their alloys »
The Document is Replaced With:
GOST 4784-2019: Aluminum and deformable aluminum alloys. Stamps
As a Replacement Of:
GOST 4784-74: Wrought aluminium and aluminium alloys. Grades
The Document References:
GOST 4784-74: Wrought aluminium and aluminium alloys. Grades
The Document is Referenced By:
GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications
GOST 10304-80: Rivets
GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications
GOST 1077-79: Single-flame multi-purpose torches for oxy-acetylene welding, soldering and heating
GOST 10831-87: Paint rolls specification
GOST 10877-76: Preservative oil K-17
GOST 11802-88: Jet fuel method of test for determination of thermal-oxidative stability under static condition
GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements
GOST 12.4.059-89: Occupational safety standards system. Construction. Protective inventory safeguards. General specifications
GOST 12393-2019: Rail contact network fittings linear. General specifications
GOST 13076-86: Synthetic oil BНИИ НП 50-1-4ф. Specifications
GOST 13716-73: Slinging arrangements for vessels and apparatus. Specifications
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14163-88: Electric cast iron rings
GOST 14838-78: Aluminum wite
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15176-89: Extruded electrotechnical buses from aluminum and aluminum alloys
GOST 1523-81: Straight reamers
GOST 1532-81: Viscosimeters of relative viscosity. Specifications
GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications
GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)
GOST 16181-82: Diamond grinding wheels
GOST 1639-93: Non-ferrous metals and alloys scrap and waste. General specifications
GOST 17151-2019: Utensils made of sheet aluminum. General specifications
GOST 17151-81: Cooking utensils made
GOST 17232-99: Aluminium and aluminium alloys plates. Specifications
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 177-88: Hydrogen peroxide
GOST 18123-82: Washers
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 18482-2018: Aluminium and aluminium alloy extruded tubes. Specifications
GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications
GOST 18591-91: Aluminium special profiles. Range of sizes
GOST 19257-73: Holes for threading metric thread. Diameters
GOST 19368-74: Ledges with strip-blockers of aluminium core boxes. Dimensions
GOST 19437-81: Cylindrical aluminium ingots. Specifications
GOST 20865-81: Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions
GOST 20866-81: Adjusting fixturing ring support with flats and threaded holes. Design and dimensions
GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
GOST 20967-2019: Rod made of aluminum alloys. Technical conditions
GOST 21029-75: Aluminum barrels for chemical products
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 2171-90: Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade designation
GOST 21791-76: Мac-30nk synthetic oil
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 22685-89: Moulds for making control specimens of concrete. Specifications
GOST 22742-77: Sets of square connectors fixture of radio electronic items. Specifications
GOST 23190-2018: Book-selling furniture. General specifications
GOST 23190-78: Bookselling furniture. General requirements
GOST 23508-2018: Book-selling furniture for storage facilities. General specifications
GOST 23598-79: Pin cable lugs. Construction and dimensions
GOST 23702-90: Non-destructive testing. Ultrasonic transducers. Test methods
GOST 23797-79: Oil for aircraft gas turbine engines. Method for the determination of thermo oxidizing stability in oil volume
GOST 23855-2019: Cylindrical ingots from aluminum alloy AD31. Technical conditions
GOST 23855-79: Cylindrical ingots of aluminium alloy AD31. Specifications
GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications
GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating
GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications
GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold
GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures
GOST 25088-98: Ship's doors. Specifications
GOST 25309-94: Covers of access hatches. Specifications
GOST 25573-82: Freight handling rope slings for construction
GOST 25782-90: Derbies, floats, semifloats. Specifications
GOST 25905-2018: Aluminium foil for condensers. Specifications
GOST 26314-98: Stationary ship's ladders. Specifications
GOST 27809-95: Cast iron and steel. Methods of spectrographic analysis
GOST 28012-89: Demountable travelling stage. Specifications
GOST 30466-98: Household kitchen appliances with external warmth supply. Safety requirements and test methods
GOST 30872-2002: Air cooling machines. General specifications
GOST 31385-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 32321-2013: Alarms guarding surface shock-contact glass break detectors for use in buildings. General requirements and test methods
GOST 32582-2013: Plain aluminum foil web for packing of food products for household purposes. Specifications
GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33796-2016: Railway multiple units. Durability and dynamics requirements
GOST 33986-2016: Automotive vehicles. High-pressure cylinders for compressed natural gas used as motor fuel. Technical requirements and test methods
GOST 34025-2016: Alarms guarding surface sonic glass break detectors for use in buildings. General technical requirements and test methods
GOST 34068-2017: Gas supply system. Natural gas production. Field pipelines. Mechanical safety. Pressure and leak tests
GOST 34117-2017: Cookware and tableware made of corrosion-resistant steel for children and teenagers. Technical conditions
GOST 34329-2017: Formworks. General specifications
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 34708-2021: Pipe fittings. Sealing materials based on thermally expanded graphite. General specifications
GOST 397-79: Split pins
GOST 5037-97: Metal cans for milk and dairy products
GOST 5089-2003: Locks and latches for doors. Specifications
GOST 5089-2011: Locks, latches, mechanisms cylinders. General specifications
GOST 538-88: Lock and building hardware
GOST 618-2014: Aluminum foil for technical purposes. Specifications.
GOST 618-73: Aluminum foil for technical purposes. Specifications
GOST 7171-78: Petrol-resisting grease. Specifications
GOST 7387-82: Aluminium alloy cable shoes for tipping of aluminium wire conductors and cables by welding. Construction and sizes
GOST 745-2003: Aluminium foil for packing. Specifications
GOST 745-2014: Aluminium foil for packing. Specifications
GOST 745-79: Aluminium foil for packing. Specifications
GOST 7727-81: Aluminium alloys. Methods of spectral analysis
GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications
GOST 8674-58: Petroleum products. Determination of fractional composition by evaporation method
GOST 8802-78: Passenger tram-cars. Specifications
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property
GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9416-83: Building levels. Technical requirements
GOST 9498-2019: Flat bars of aluminum and aluminum wrought alloys for hire. Technical specifications
GOST 9498-79: Flat ingots of aluminium and wrought aluminium alloys for rolling. Specifications
GOST EN 28839-2015: Mechanical properties of fasteners – bolts, screws, studs and nuts made of non-ferrous metals
GOST ISO 28927-4-2013: Mechanical vibration. Evaluation of vibration emission of hand-held power tools. Part 4. Straight grinders
GOST R 50632-93: High-strength hydrogen peroxide. Specifications
GOST R 50659-2012: Microwave Doppler detectors for use in buildings and open areas. General requirements and test methods
GOST R 50659-94: Alarm systems. Part 2. Requirements for intruder alarm systems. Section 5. Microwave Doppler detectors for use in buildings
GOST R 51016-97: Sets of carbon steel and aluminium alloys. General specifications
GOST R 51186-98: Alarm sonic passive glass break detectors for use in buildings. General technical requirements and methods of tests
GOST R 51314-99: Aluminium caps and caps made of aluminium-plastics combinations for medicine remedies. General specifications
GOST R 51364-99: Air cooling apparatus. General specifications
GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications
GOST R 51753-2001: High pressure cylinders for the compressed natural gas as a fuel for automotive vehicles. General specifications
GOST R 51834-2001: Extruded aluminium alloy bars of high strength and improved ductility. Specifications
GOST R 51860-2002: Products wear resistance assurance. Evaluation of lubrication materials antiwear properties by 'ball - cylinder' method
GOST R 52085-2003: Formworks. General specifications
GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods
GOST R 52338-2005: Industrial cleanliness. Methods for lubricating and cooling liquids testing
GOST R 52434-2005: Active infra-red detectors. General technical requirements and test methods
GOST R 52630-2006: Steel welded vessels and apparatus. General specifications
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 52650-2006: Combined microwave infra-red intrusion detectors for rooms. General technical requirements and test methods
GOST R 52651-2006: Microwave intrusion detectors for perimeters. General technical requirements and test methods
GOST R 52910-2008: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 52933-2008: Capacitance intrusion detectors for rooms. General technical requirements and test methods
GOST R 53325-2012: Fire techniques. Means of fire automatics. General technical requirements and test methods
GOST R 53702-2009: Alarms guarding surface vibration detectors for blocking of structures and safes. General technical requirements and test methods
GOST R 53927-2010: Shell-type inserted blade circular cutterbloks for woodcutting. General specifications
GOST R 54156-2010: Table utensils made from stainless steel for children and teenagers. Specifications
GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications
GOST R 54832-2011: Alarms are guarding point magnetic contact. General requirements and test methods
GOST R 55150-2012: Combined passive infrared ultrasonic intrusion detectors for use in buildings. General technical requirements and test methods
GOST R 55375-2012: Primary aluminium and alloys based on it. Grades
GOST R 55395-2013: Extruded strip-like section aluminium alloy shapes with arched cut-outs. Dimensions
GOST R 55411-2013: Roll-formed shapes of aluminium and aluminium alloys. Specifications
GOST R 55495-2013: Railway multiple units. Durability and dynamics requirements
GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials
GOST R 55513-2013: Locomotives. Requirements for strength and dynamic properties
GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements
GOST R 55738-2013: Studs and ceramic ferrules for stud welding
GOST R 55774-2013: High precision and high surface finishing rectangular and H-shaped tubes of aluminium and aluminium alloys for waveguides. Specifications
GOST R 55775-2013: Aviation oil МС-8П. Specifications
GOST R 55808-2013: Non-destructive testing. Ultrasonic transducers. Test methods
GOST R 56043-2014: Extruded aluminium alloy bulb-shaped strip-section symmetrical and asymmetrical shapes with trapezoidal heads. Dimensions
GOST R 56177-2014: Controlled door closing devices (door closers). Specifications
GOST R 56281-2014: Aluminum alloy extruded large round tubes. Specifications
GOST R 56282-2014: Aluminum alloy extruded large solid sections. Specifications
GOST R 56650-2015: Polymer composites. Methods for determination of tensile properties of pultruded glass-reinforced plastic rods
GOST R 56674-2015: Casting of aluminium alloys and solid stamping of sheet aluminium cookware with non-stick coating. General specifications
GOST R 57517-2017: General-purpose aluminium and aluminium alloys drawn wire. Specifications
GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements
GOST R 58333-2018: Pressed finned panels made of aluminum alloys. Technical specifications
GOST R 8.776-2011: State system for ensuring the uniformity of measurements. Certified reference materials of composition of gas Mixtures. General metrological and technical requirements
GOST R ISO 28927-1-2012: Vibration. Evaluation of vibration emission of hand-held power tools. Part 1. Angle and vertical grinders
GOST R ISO 8839-2009: Mechanical properties of fasteners - bolts, screws, studs and nuts made of non-ferrous metals
I 1.09-10: Instructions for connecting insulated conductors of wires and cables
IBJaL.413411.056 MP: Signaling devices for carbon monoxide and combustible gases STG-1. Verification Method
IBJaL.413411.058 MP: Gas analyzers ANKAT-7631Mikro. Verification Method
IBJaL.413531.010 MP: Signaling device of combustible gases SGG-6M. Verification Method
IBJaL.413534.011 MP: Signaling devices of carbon monoxide СОУ1. Verification Method
IM 14-18-2005: Automation. Instruments for measuring and controlling the composition and properties of substances. Directory
MDS 12-22.2005: Recommendations for the application in the construction industry of the requirements of regulatory legal and other regulatory acts containing state regulatory labor protection requirements
NPB 190-2000: Fire equipment. Cylinders for breathing apparatuses with compressed air for fireman. General technical requirements. Test methods
OST 1 92096-83: Cold worked seamless pipes of aluminium alloys. Specifications.
OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.
OST 26-291-94: Steel welded vessels and devices. General technical requirements.
OST 4 G0.033.200: Solders and fluxes for soldering, solder pastes. Brands, composition, properties and scope (edition 1-78)
PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus
PB 03-576-03: Regulations of design and safe operation of pressure vessels
PB 10-115-96: Regulations of design and safe operation of pressure vessels
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
R 50-112-89: Recommendations. Hardening coatings used in the manufacture and restoration of textile equipment parts and machines for the processing of chemical fibers
RD 059/01-2019: Instructions for welding and surfacing during the repair of freight cars (with Amendment No. 1)
RD 10-33-93: Slings for loading and general purposes. Requirements for arrangement and safe operation.
RD 50-703-91: Instructions. The basic supporting structures of electronic equipment. Technological requirements
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SP 128.13330.2012: Aluminium structures
SP 128.13330.2016: Aluminium structures
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
ST RK 1667-2007: Materials of construction for the body of passenger cars and multiple units. Technical requirements and testing methods
ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials
ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts
ST TsKBA 076-2009: Pipe fittings. Distinctive signs. Types, sizes and specifications
STB 1026-2008: Section metal railing for bridges and overpasses. Technical conditions
STO-SA-03-002-2009: Rules for the design, manufacture and installation of vertical cylindrical steel tanks for oil and oil products
TU 38.1011299-2006: IPM 10 aviation oil
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.