GOST 6032-2003

ГОСТ 6032-2003

Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

Стали и сплавы коррозионно-стойкие. Методы испытаний на стойкость �� межкристаллитной коррозии

Status: Not effective - Superseded. Registration information 1054-st dated September 12, 2017 (official website of Rosstandart); IUS 1-2018

The standard establishes test methods for resistance to intergranular corrosion of metal products from corrosion-resistant steels and alloys, including two-layer, austenitic, ferritic, austenitic-ferritic, austenitic-martensitic classes according to GOST 5632, as well as their welded joints and weld metal.

Стандарт устанавливает методы испытаний на стойкость к межкристаллитной коррозии металлопродукции из коррозионно-стойких сталей и сплавов, в том числе двухслойных, аустенитного, ферритного, аустенитно-ферритного, аустенитно-мартенситного классов по ГОСТ5632, а также их сварных соединений и наплавленного металла.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Russian Federation for Standardization and Metrology, 3/9/2004

SKU: RUSS20950




Price: request_a_quote

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Pipelines »

Welding regulations » Welding materials »

Welding regulations » Documentation »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Welding work » Manual welding »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Main materials » Non-ferrous metals »

Welding regulations » Welding materials » Wire »

Standards for pipe fittings (TPA) » 10. Production » 10.8 Material Testing »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 77 METALLURGY » 77.060 Corrosion of metals »

National standards » 77 METALLURGY » 77.060 Corrosion of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V0 General rules and regulations on metallurgy » V09 Test methods. Packaging. Marking »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Control methods (testing, analysis, measurements) »


The Document is Replaced With:

GOST 6032-2017: Steel and corrosion resistant alloys. Test methods for resistance to intergranular corrosion

As a Replacement Of:

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

The Document References:

GOST 11125-84: Super pure nitric acid. Specifications

GOST 12601-76: Zinc powder. Specifications

GOST 1381-73: Hexamethylenetetramine for industrial use. Specifications

GOST 14019-2003: Metallic materials. Bend test method

GOST 14019-80: Metals. Methods of bend tests

GOST 19347-99: Copper sulfate. Technical conditions

GOST 20848-75: Reagents. Potassium fluoride 2-aqueous. Specifications

GOST 22180-76: Reagents. Oxalic acid. Specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 3118-77: Reagents. Hydrochloric acid. Specifications

GOST 3652-69: Reagents. Citric acid monohydrate and anhydrous. Specifications

GOST 3769-78: Reagents. Ammonium sulphate. Specifications

GOST 3776-78: Reagents. Chromium (VI) oxide. Specifications

GOST 4165-78: Reageuts. Copper II sulphate pentahydrate. Specifications

GOST 4204-77: Reagents. Sulphuric acid. Specifications

GOST 4461-77: Reagents. Nitric acid. Specifications

GOST 4463-76: Reagents. Sodium fluoride. Specifications

GOST 4518-75: Reagents. Ammonium fluoride. Specifications

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 6552-80: Reagents. Orthophosphoric acid. Specifications

GOST 6709-72: Distilled water. Specifications

GOST 6996-66: Welded joints. Methods of mechanical properties determination

GOST 859-2001: Copper. Grades

GOST 9485-74: Reagents. Ferric sulphate 9-aqueous. Specifications

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST 9941-81: Seamless cold- and warm-deformed tubes made from corrosion-resistant steel

The Document is Referenced By:

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 14803-85: Rivets (high precision). General specifications

GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel

GOST 19277-2016: Seamless steel pipes, cold-deformed for oil and fuel pipelines. Specification

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 22790-89: Assembly units and pipelines components, designed for рnom over 10 to 100 MPa (from 100 to 1000 kgf/cm2)

GOST 24030-80: Seamless pipes from corrosion-resistant steel for power plant industry

GOST 24982-81: Sheets of corrosion-resistant, heat-resistant and high-temperature alloys

GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications

GOST 32504-2013: Petroleum and natural gas industries. Downhole equipment. Sand screens liquid centrifugal separators. General technical requirements

GOST 32569-2013: Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33258-2015: Pipeline valves. Surfacing and quality control of surfaced surfaces. Technical requirements

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33857-2016: Pipe fittings. Welding and quality control of welded joints. Technical requirements

GOST 33976-2016: Welded joints in steel structures of railway rolling stock. Requirements for design, implementation and quality control

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 9.914-91: Unified system of corrosion and ageing protection. Corrosion-resistant austenitic steels. Electrochemical methods for determination of intercrystalline corrosion resistance

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 977-88: Steel castings. General specifications

GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel

GOST ISO 3506-1-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 1. Bolts, screws and studs

GOST ISO 3506-2-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 2. Nuts

GOST ISO 3506-3-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 3. Setting screws and similar fasteners not under tensile stress

GOST ISO 3506-4-2014: Mechanical properties of fasteners made from corrosion-resistant stainless steel. Part 4. Self-tapping screws

GOST ISO 9329-4-2013: Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications

GOST R 51393-99: Corrosion-resistant steel cold rolled sheets and decks cold-shaped sections for carriage building. Specifications

GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications

GOST R 52153-2003: Radiation-protective boxes. General specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52768-2007: Centrifuges for industries working with radioactive media. General technical requirements and test methods

GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements

GOST R 53192-2014: Welded joints in steel structures of railway rolling stock. Requirements for design, production and quality control

GOST R 53374-2009: Liquid - propellant rocket engines. General technical requirements for production and quality inspection during supply for use

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 54803-2011: High-pressure welded steel vessels. General technical requirements

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55599-2013: High pressure pipeline assembly units and components above 10 up to 100 MPa. General technical requirements

GOST R 56463-2015: Liquid-propellant rocket engines of small thrust. Production, tests and quality assurance general requirements under in-service delivery

GOST R 56594-2015: Hot-deformed seamless pipes made of corrosion-resistant high-alloy steel. Specifications

GOST R 57423-2017: Tubes for boiler and heat exchanging equipment. Part 2. Seamless steel tubes for pressure purposes more 6, 4 MPa and temperatures exceeding 400 °C. Specifications

GOST R ISO 5832-9-2009: Implants for surgery. Metallic materials. Part 9. Wrought high nitrogen stainless steel

GOST R ISO 9329-4-2010: Seamless tubes from austenitic high-alloy steels for pressure purposes. Specifications

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 24.201.03-90: Steel high-pressure vessels and devices. General technical requirements.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26.260.480-2003: Two-ply steel vessels and devices. Welding and weld deposition.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 34-42-816-85: Welding of pipelines from the pearlitic and austenitic steels on nuclear power plants. Main provisions.

RD 24.200.04-90: Weld seams. Metallographic method of control of the base metal and welded joints of chemical oil equipment

RD 26-02-80-2004: The leading document. Welded coils for pipe furnaces. Requirements to design, production and delivery.

RD 26-17-086-88: Weld joints. Quality control of heat treatment equipment

RD 26-17-78-87: Pulsed-arc welding of chemical oil equipment from stainless steels with a consumable electrode in argon

RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants

RD 50-541-85: Guidelines for the implementation of the standards of the Unified System for the Protection of Products and Materials Against Corrosion, Aging and Biodeterioration (ESHSC) in industries

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants

ST TsKBA 016-2005: Pipe fittings. Heat treatment of parts, billets and welded assemblies from high-alloy steels, corrosion-resistant and high-temperature alloys

ST TsKBA 025-2006: Pipe fittings. Welding and quality control of welded joints. Technical requirements

ST TsKBA 030-2006: Pipe fittings. Springs helical cylindrical. General technical conditions

ST TsKBA 052-2008: Pipe fittings. Requirements for materials of fittings used for hydrogen sulfide environments

ST TsKBA 053-2008: Pipe fittings. Surfacing and quality control of weld surfaces. Technical requirements

ST TsKBA 078-2011: Pipe fittings. Production certification. Weld Technology

ST TsKBA 088-2010: Pipe fittings. The quality control program of valves used for hydrogen sulfide environments

TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-3R-197-2001: Seamless pipes made of corrosion-resistant steel with high surface quality. Technical conditions

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 26-18-38-90: Parts of seamless welded pipelines from steel grades 15Х5М, 12Х1МФ, 12Х18Н10Т, 08Х22Н6Т

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

TU 36-1686-82: Bends are steeply curved with an angle of 90 degrees from steel grades 15X5M, 08X18NIOT, 12X18NIOT and 10X17H13M2T seamless welded on the Rou is less than 10 MPa

TU 3644-006-00220302-99: Shell-and-tube heat exchangers for special purposes. Refrigeration evaporators and condensers

Customers Who Viewed This Item Also Viewed:

Loads and impacts
Language: English
Price: $306.00
Pipeline valves. Methods of control and testing
Language: English
Price: $417.00
Power convertors railway rolling stock. Characteristics and test methods
Language: English
Price: $447.00
Static non-tractive converters for railway rolling stock. General specifications
Language: English
Price: $261.00
Steel grinding balls for ball mills. Specifications.
Language: English
Price: $217.00
Occupational safety standards system. Power frequency electric fields. Permissible levels of field strength and requirements for control at work-places
Language: English
Price: $67.00
Three-phase asynchronous motors. General specifications.
Language: English
Price: $397.00
Occupational safety stаndards system. Vibration safety. General requirements
Language: English
Price: $178.00
Rotating electrical machines. Rating and performance
Language: English
Price: $518.00
Technical regulations of Customs Union. On safety of rolling stock
Language: English
Price: $181.30
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $261.00
State system for ensuring the uniformity of measurements. Platinum, copper, and nickel resistance resistive temperature transducers. General requirements and test methods
Language: English
Price: $240.00
Rotating electrical machines. Noise limits
Language: English
Price: $138.00
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English
Price: $147.00
Centrifugal pumps. Technical specifications. Class I
Language: English
Price: $543.00
Rotodynamic pumps. Test methods
Language: English
Price: $659.00
Construction in seismic regions
Language: English
Price: $553.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!