GOST R 51909-2002
ГОСТ Р 51909-2002
|
|
Environment stability test methods for machines, instruments and other industrial products. Tests for transportation and storage
Методы испытаний на стойкость к внешним воздействующим факторам машин, приборов и других технических изделий. Испытания на транспортирование и хранение
Status: Effective - Introduced for the first time
The standard applies to machines, devices and other technical products of all kinds and establishes verification and testing methods to determine whether packaging and temporary anti-corrosion protection (taking into account product design features) ensure product persistence when exposed to packaging and packaging of external factors during storage. and transportation, in particular for compliance with the requirements of GOST R 51908. The standard does not establish methods for determining or confirming the shelf life products.
Стандарт распространяется на машины, приборы и другие технические изделия всех видов и устанавливает методы проверки и испытаний, позволяющие определить, обеспечивают ли упаковка и временная противокоррозионная защита (с учетом особенностей конструкции изделия) сохраняемость изделий при воздействии на упаковку и упакованные изделия внешних воздействующих факторов при хранении и транспортировании, в частности на соответствие требованиям ГОСТ Р 51908. Сандарт не устанавливает методов определения или подтверждения сроков сохраняемости изделий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
7/4/2002
SKU: RUSS20977
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
21 Mechanical systems and general purpose devices »
Welding regulations »
Welding work »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Welding work »
Dusting »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.4 Special test procedures »
11.4.3 On certain types of external impacts »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.4 Special test procedures »
11.4.2 Climatic testing »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National standards »
21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES »
21.020 Characterization and design of mechanisms, instruments and equipment »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T51 Documentation system that determines indicators of quality, reliability and durability of products »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State Standardization System (SSS) »
The Document References:
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 26883-86: Exposure factors. Terms and definitions
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
GOST R 51369-99: Climatic environment stability test methods machines, instruments and other industrial products. Test for influence of humidity
The Document is Referenced By:
GOST 30630.2.5-2013: Test methods for resistance to climatic external influencing factors for machines, instruments and other industrial products. Tests on the effects of salt spray
GOST 33787-2019: Equipment of railway rolling stock. Shock and vibration test
GOST R 51908-2002: General requirements for machines, instruments and other industrial products as to storage and transporting conditions
GOST R 52763-2007: Climatic environment stability test methods for machines, instruments and other industrial products. Tests for exposure to salt mist
GOST R 53560-2009: Intruder alarm systems. Power supply units. Classification. General technical requirements. Test methods
GOST R 8.855-2013: State system for ensuring the uniformity of measurements. Standard platinum and rhodium-iron resistance thermometers. General requirements and test methods
GOST R 9.517-2003: Unified system of corrosion and ageing protection. Temporary rust protection of products. Test methods
RMG 45-2003: Presentation of requirements as to environment factors when using IEC and ISO standards in normative standardization documents. General
ST CKBA 125-2020: Pipe fittings. Types of control and testing
|
Customers Who Viewed This Item Also Viewed:
 |
Square steel tubes. Range
Language: English |
Design norms for antiseismic atomic power stations
Language: English |
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English |
Electric locomotives. General technical requirements
Language: English |
Pipeline valves. Leakage rates of valves
Language: English |
Federal Standards and Rules in the Field of Atomic Energy Use
Language: English |
Locomotive and motor rolling stock. Requirements of fire safety
Language: English |
Railway rolling stock. Methods for monitoring the performance of fire alarm and fire extinguishing systems
Language: English |
Oil. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
