GOST R 53191-2008
ГОСТ Р 53191-2008
|
|
Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process
Формирование колесных пар локомотивов и моторвагонного подвижного состава тепловым методом. Типовой технологический процесс
Status: Not effective - Canceled. Registration information 1170-st dated 11.26.2012
The standard applies to the wheelset of locomotives (diesel locomotives, electric locomotives, gas turbine locomotives), rolling stock (traction rolling stock, hereinafter - TPS). The standard establishes the requirements for a typical technological process of formation or assembly (hereinafter - formation) of wheel pairs using the thermal method: axes with composite, solid running and gear wheels, wheel centers, hubs of composite gear wheels, brake disc hubs (hereinafter referred to as parts), as well as elongated wheel center hubs with a gear wheel in the manufacture and repair of wheel pairs.
Стандарт распространяется на колесные пары локомотивов (тепловозов, электровозов, газотурбовозов), моторвагонного подвижного состава (тягового подвижного состава, далее - ТПС). Стандарт устанавливает требования к типовому технологическому процессу формирования или сборки (далее - формирование) колесных пар тепловым методом: осей с составными, цельными колесами ходовыми и зубчатыми, колесными центрами, ступицами составных зубчатых колес, ступицами тормозных дисков (далее - детали), а также удлиненной ступицы колесного центра с зубчатым колесом при изготовлении и ремонте колесных пар.
Choose Language:
Format: Electronic (pdf/doc)
Page Count: 16
Approved: Federal Agency for Technical Regulation and Metrology,
12/18/2008
SKU: RUSS20992
The Product is Contained in the Following Classifiers:
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.10 Traction train »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.10 Traction train »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D56 Automatic coupling and brake equipment »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10054-82: Water-resistant abrasive paper
GOST 1012-72: Aviation petrol
GOST 10597-87: Painting brishes. Specifications
GOST 10791-2004: All-rolled wheels. Specifications
GOST 11018-2000: Traction railway stock for 1520 mm gauge railways. Wheel sets. General specifications
GOST 12.1.004-91: Fire safety. General requirements
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.017-93: The forging and pressing equipment general safety requirements
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 12.4.103-83: Occupational safety standards system. Special protective clothes, personal means of hand and legs protections. Classification
GOST 21790-2005: Cotton and mixed fabrics for garments. General specifications
GOST 2768-84: Acetone technical. Specifications
GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications
GOST 3134-78: White spirit
GOST 4381-87: Lever-type micrometers. General specifications
GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock
GOST 5009-82: Abrasive cloth. Specifications
GOST 5584-75: Lever-toothed indicators graduated in 0,01 mm. Specifications
GOST 5791-81: Technical linseed oil. Specifications
GOST 6360-83: MT-16P and M-16PC oils.
GOST 6507-90: Micrometers. Specifications
GOST 7931-76: Natural drying oil
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 868-82: Internal dial gauges graduated in 0,01 mm. Specifications
GOST 9.010-80: Unified system of corrosion and ageing protection. Compressed air for atomization of paint materials. Technical requirements and methods of control
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications
GOST 9378-93: Roughness comparison specimens
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications
GOST R 51220-98: Transmission tooth gears of the traction main railway stock. Raw pieces. Technical specifications
GOST R 52381-2005: Abrasive materials. Grain and grain size distribution of grinding powders. Test of grain size distribution
GOST R 52465-2005: Sunflower oil. Specifications
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
Customers Who Viewed This Item Also Viewed:
 |
Special railway rolling stok. Dynamic and strength testing procedures
Language: English |
Blanks for marine shafts and rudder stocks. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.