imgalt

GOST R 53337-2009

ГОСТ Р 53337-2009

Special rolling stock. Requirements for bearing structure stength and for dynamic properties

Специальный подвижной состав. Требования к прочности несущих конструкций и динамическим качествам

Status: Not effective - Canceled. Registration information 1169-st dated November 26, 2012 (official website of Rosstandart); IUS 9-2013

Special rolling stock. Requirements for bearing structure stength and for dynamic properties

Специальный подвижной состав. Требования к прочности несущей конструкции и динамическим свойствам

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 3/12/2009

SKU: RUSS20994

Price: $1,126.00



imgalt

The Product is Contained in the Following Classifiers:

Evidence base (TR CU, Technical Regulation of the Customs Union) » 001/2011 TR TS. On safety of railway rolling stock » Regulations and standards (to TR CU 001/2011) »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 003/2011 TR TS. On safety of railway infrastructure » Regulations and standards (for TR CU 003/2011) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.14 Testing and monitoring of vehicles and equipment » 4.14.3 Railway and tram locomotives, rail rolling stock »

ISO classifier » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.10 Traction train »

National standards » 45 RAILWAY ENGINEERING » 45.060 Rolling stock of railways » 45.060.10 Traction train »

National Standards for KGS (State Standards Classification) » Latest edition » D Vehicles and packaging » D5 Rail transport » D55 Frames, units and parts of rolling stock of railways »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10052-75: Metal covered electrodes, for manual arc welding of high-alloyed steels with special properties. Types

GOST 10157-79: Gaseous and liquid argon. Specifications

GOST 10304-80: Rivets

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10791-2004: All-rolled wheels. Specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 11018-2000: Traction railway stock for 1520 mm gauge railways. Wheel sets. General specifications

GOST 1215-79: Malleable iron castings

GOST 1412-85: Flakish graphite cast iron

GOST 1425-93: Lief springs for railway rolling stock. Technical requirements

GOST 1452-2003: Screw cylindrical springs for trucks and draw-and-buffer gears of railway rolling stock. Specifications

GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel

GOST 14955-77: Quality round steel with a special surface finish

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 1497-84: Metals. Methods of tension test

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 18855-94: Rolling bearings. Dinamic load ratings and rating life

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19282-73: Low-alloyed plate strip universal steel. Specifications

GOST 19905-74: Strengthening of hardware by surface chemical heat treatment. Contents of general requirements

GOST 21354-87: Cylindrical evolvent gears of external engagment. Strength calculation

GOST 21357-87: Castings made of cold- and wear- resistant steel

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 2246-70: Welding steel wire. Specifications

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 23207-78: Fatigue strength. Terms, definitions and symbols

GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications

GOST 27772-88: structural steel structure rolled products. General specifications

GOST 31334-2007: Axles for rolling stock of 1520 mm gauge railways. Specifications

GOST 380-2005: Common quality carbon steel. Grades

GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock

GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock

GOST 4543-71: Structural alloyed steel

GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 5457-75: Dissolved acetylene and gaseous acetylene for technical purposes. Specifications

GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 6331-78: Industrial and medical liquid oxygen

GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications

GOST 7293-85: Cast iron with globular graphite for foundry

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 8050-85: Carbon dioxide,

GOST 8479-70: Structural carbon and alloy steel forgings

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9045-93: Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

GOST 9087-81: Welding melted fluxes

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types

GOST 977-88: Steel castings. General specifications

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 51175-98: Transmission tooth gears of the traction main railway stock. Specifications

GOST R 51775-2001: Wheel sets for the special-purpose rolling stock. General specifications

GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods

The Document is Referenced By:

GOST R 53978-2010: Special railway rolling stock. General technical requirements

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Jet fuels
Language: English
Price: $49.00
imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English
Price: $134.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Technical ethylcellosolve. Specifications
Language: English
Price: $283.00
imgalt
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English
Price: $79.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Locomotives The method of dynamic strength tests
Language: English
Price: $333.00
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!