imgalt

NB ZhT TM 02-98

НБ ЖТ ТМ 02-98

The safety standards for rail transport. Metal products for railway rolling stock. Standards of safety.

Нормы безопасности на железнодорожном транспорте. Металлопродукция для железнодорожного подвижного состава. Нормы безопасности

Status: Effective - Introduced for the first time

Safety standards apply to metal products for railway rolling stock and are applied during certification in the certification system established by the federal executive body in the field of railway transport.

Нормы безопасности распространяются на металлопродукцию для железнодорожного подвижного состава и применяются при проведении сертификации в системе сертификации, созданной федеральным органом исполнительной власти в области железнодорожного транспорта

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Railways of Russia, 6/24/1998

SKU: RUSS21011

Price: $1,216.00

imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Sectoral and departmental regulatory and methodological documents » Design and construction of railways »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » V Social Security » 2 Safety requirements » 2.1 Safety in transport and transport infrastructure facilities »

PromExpert » SECTION I. TECHNICAL REGULATION » IV Conformity assessment of products and services » 2 Declaration of conformity and certification of products and services »

ISO classifier » 03 SOCIOLOGY. SERVICES ORGANIZATION AND MANAGEMENT OF COMPANIES. ADMINISTRATION. TRANSPORT » 03.120 Quality » 03.120.20 Certification of products and companies. Conformity assessment »

ISO classifier » 45 RAILWAY ENGINEERING » 45.040 Materials and components for railway equipment »


The Document References:

GOST 10243-75: Steel. Methods of test and estimation of macrostructure

GOST 10791-89: Solid rolled wheels

GOST 11018-87: Wheel sets of diesel and electric locomotives for 1520 mm gauge railways. Specifications

GOST 1205-73: Cast iron brake shoes for cars and tenders of broad gauge. Construction and basic dimensions

GOST 14019-80: Metals. Methods of bend tests

GOST 1497-84: Metals. Methods of tension test

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 21105-87: Non-destructive testing. Method of magnetic particle testing

GOST 21447-75: Coupler contour line. Dimensions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22536.7-88: Carbon steel and unalloyed cast iron. Methods for determination of chromium

GOST 22536.8-87: Carbon steel and unalloyed cast iron. Methods for determination of copper

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 22780-93: Car axles for 1520 (1524) mm gauge main-line railways. Types, parameters and dimensions

GOST 25.506-85: Design, calculation and strength testing. Methods of mechanical testing of metals. Determination of fracture toughness characteristics under the static loading

GOST 26645-85: Metal and alloy castings. Dimensions and mass tolerances and machining allowances.

GOST 27208-87: Cast iron casting. Methods of mechanical testing

GOST 28186-89: Brake shoes for motor car of rolling stock. Specifications

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 30237-96: Finished axles for rolling stock of railroads with 1520 mm track

GOST 30249-97: Cast iron brake blocks for locomotives. Specifications

GOST 30272-96: Black collar axles (profile stock) for 1520 mm gauge railways. Specifications

GOST 3225-80: Rough tyres for locomotives of broad-gauge railways. Types and dimensions

GOST 3443-87: Cast iron castings with graphite of different form. Methods of structure determination

GOST 398-96: Carbon steel tires for broad gauge railroads and subway rolling-stock

GOST 4491-86: Cast wheel centers for the 1520 mm-gauge railroad rolling stock

GOST 4543-71: Structural alloyed steel

GOST 4728-96: Axle billets for the railway rolling stock of 1520 mm gauge

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5657-69: Steel. Methods for the determination of hardenability

GOST 8233-56: Steel. Microstructure standards

GOST 9012-59: Metals. Method of Brinell hardness measurement

GOST 9036-88: Solid-rolled wheels. Design and dimensions

GOST 9454-78: Metals. Method for testing the impact strength at the low, room and high temperature

The Document is Referenced By:

ST SSFZhT TM 151-2003: The wheels are seamless. Determination of the endurance limit of the disk. Typical Test Procedure

ST SSFZhT TM 152-2003: Finishing carriage axles. Definition of the endurance limit of the necks of the axes. Typical test method

ST SSFZhT TM 153-2003: Finished car axles. Determination of cyclic fracture toughness. Standard test procedure

ST SSFZhT TsL-TsT 146-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical methods of control of the macrostructure

ST SSFZhT TsL-TsT 147-2003: Cast wheel centers for rolling stock of 1520 mm gauge railways. Typical method of controlling the microstructure

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English
Price: $634.00
imgalt
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English
Price: $87.00
imgalt
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English
Price: $71.00
imgalt
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English
Price: $139.00
imgalt
Ice cream. General technical requirements
Language: English
Price: $162.60
imgalt
Pipe fittings. Ball valves made of brass. General specifications
Language: English
Price: $398.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!