PNAE G-7-018-89
ПНАЭ Г-7-018-89
|
|
Safety guidelines. Standardized methods of control of basic materials (semi-finished products), welded joints and surfacing of NPP equipment and piping. Dye penetrant inspection
Руководство по безопасности. Унифицированные методики контроля основных материалов (полуфабрикатов), сварных соединений и наплавки оборудования и трубопроводов АЭУ. Капиллярный контроль
Status: Not effective - Canceled in the Russian Federation. By the order of the Federal Service for Ecological, Technological and Nuclear Supervision dated April 30, 2014 No. 182 were declared inoperative on the territory of the Russian Federation
The document establishes the sensitivity classes of capillary control, the technological sequence of operations under control, the recipe of test kits, the requirements for control samples.
Документ устанавливает классы чувствительности капиллярного контроля, технологическую последовательность операций при контроле, рецептуру наборов дефектоскопических материалов, требования к контрольным образцам.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosatomnadzor of Russia,
7/1/1990
SKU: RUSS21027
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Regulatory documents of supervisory authorities »
Normative documents of Gosatomnadzor of Russia »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
welding equipment »
Welding regulations »
Certification »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Gases »
Technical Supervision »
Section II. State regulation of safety in use of atomic energy »
Other documents »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
4 Objects with nuclear power plants »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
III Nuclear and radiation safety »
3 Atomic stations »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.120 Nuclear power engineering »
27.120.99 Nuclear energy, other aspects »
The Document is Replaced With:
RB-090-14: Safety guide on nuclear energy use
The Document References:
GOST 10689-75: Soda ash from nepheline raw stock for industrial use. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 1571-82: Turpentine oil
GOST 17299-78: Technical ethyl alcohol. Specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19608-84: Concentrated kaolin for rubber-industrial and plastic products, artificial leather and cloth. Specifications
GOST 21285-75: Caoline concentrated for perfume industry. Specifications
GOST 2603-79: Reagents. Acetone. Specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 3-88: Surgical rubber gloves
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5962-67: Rectified ethyl alcohol. Specifications
GOST 83-79: Reagents. Sodium carbonate. Specifications
GOST 8505-80: Nefras-C 50/170. Specifications
GOST 9412-77: Medical gauze. Specifications
GOST 982-80: Transformer oils
GOST 9940-81: Seamless hot-deformed tubes made from corrosion-resistant steel
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
SN 245-71: Sanitary standards for the design of industrial enterprises
The Document is Referenced By:
ATPE 9-09: A typical program for the operational control of the state of the base metal and welded joints of equipment and pipelines of nuclear power plants with VVER-1000 RP during operation
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
I 23 SD-80*: Instructions for flaw detection of pipe bends made of pearlite steel
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.
OST 95 10439-2002: Equipment for radioactive environments. General technical requirements. Acceptance. Maintenance and repair.
OST 95 10575-2002: Equipment and pipelines of separation plants. Weld joints and deposits. Control rules
OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
RB-090-14: Safety guide on nuclear energy use
RD 153-34.1-17.461-00: Methodological guidelines for penetrant testing of welded joints, weld pads and parent metal during manufacturing, installation, operation and repairing of power equipment.
RD 2730.300.06-98: Fixtures for nuclear plants and thermal stations. Cladding of sealing surfaces. Specifications
RD 34.10.117-92: Method for Development of Specified Quantity Allowances for Standby Equipment and Spare Parts for Energy System Repair and Maintenance
RD 34-10.030-89: Rules for quality control of welded joints of pipelines of nuclear power plants
RD EO 0605-2005: Regulation on procedure of application of expired pipeline fittings at nuclear power plants
RD EO 1.1.2.01.0086-2014: Quality Assurance in the Repair of Nuclear Power Plant Systems and Equipment. Main provisions
RD EO 1.1.2.25.0937-2013: Nondestructive control. Uniform requirements for the form and content of technological maps
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 078-2011: Pipe fittings. Production certification. Weld Technology
ST TsKBA 084-2010: Elements of pipelines. Parts and assembly units of titanium alloys for nuclear power plant pipelines. General technical conditions
ST TsKBA 098-2011: Pipe fittings. Repair of surfacing. Technical requirements
ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual
TU 108.11.853-87: Procurement of parts from purchased long products
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
