imgalt

SP 64.13330.2011

СП 64.13330.2011

Wooden structures.

Деревянные конструкции.

Status: Superseded in part. Recognized not to be applied by order of the Ministry of Construction of Russia No. 129

The set of rules applies to the methods of designing and calculating structures made of solid and laminated wood used in the public, residential, industrial and other construction sectors. The standards do not apply to the design of a recreation center for hydraulic structures, bridges, foundations and piles.

Свод правил распространяется на методы проектирования и расчета конструкций из цельной и клееной древесины, применяемых в общественной, жилищной, промышленной и других отраслях строительства. Нормы не распространяются на проектирование ДК гидротехнических сооружений, мостов, фундаментов и свай.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Regional Development of the Russian Federation, 12/28/2010

SKU: RUSS21060

Price: $1,420.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » K.54 Wooden structures »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.20 Wooden structures »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.20 Wooden structures »


The Document is Replaced With:

SP 64.13330.2017: Timber structures

As a Replacement Of:

SP 64.13330.2010: Timber structures

The Document References:

Federal Law 184-FZ: About technical regulation

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

GOST 11539-2014: Bakelized plywood. Specifications

GOST 11539-83: Bakelite resin plywood

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 13913-78: Laminated wood plastics. Specifications

GOST 15613.4-78: Glued massive wood. Methods for determining the ultimate strength of serrate glued joints in static bending

GOST 16350-80: Climate of the USSR. Regionalizing and statistical parameters of climatic factors for technical purposes

GOST 17005-82: Wooden laminated structures. Methods to determinate water-stability of adhesive joints

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 20587-75: Press plates of universally-assembled dies with grooves of 16 mm. Design and dimensions

GOST 20850-2014: Wooden glued load bearing structures. General specifications

GOST 20850-84: Wooden laminated structures. General specifications

GOST 21554.2-81: Sawn timber and blanks. Method for determination of ultimate strength in static bending

GOST 21554.4-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in compression parallel to grain

GOST 21554.5-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in tension parallel to grain

GOST 21554.6-78: Sawn timber and semi-manufactures. Method for determining the ultimate strength in shearing parallel to grain

GOST 2695-83: Sawn timber of leaf-bearing species

GOST 27751-2014: Reliability for constructions and foundations. General principles

GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations

GOST 27812-2005: Glued laminated timber. Test methods for glue lines delaminating strength

GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements

GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions

GOST 30403-2012: Building structures. Fire hazard test method

GOST 30403-96: Building structures fire hazard test method

GOST 30494-2011: Residential and public buildings. Microclimate parameters for indoor enclosures

GOST 33080-2014: Timber structures. Strength classes of structural sawn timber and methods of its determination

GOST 33081-2014: Wooden glued bearing structures. Strength classes of structures elements and methods for its determination

GOST 33120-2014: Glued timber structures. Methods for determining strength of glue joints

GOST 33121-2014: Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects

GOST 33122-2014: Glue for load bearing structures. General specifications

GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use

GOST 3916.2-96: General purpose plywood with coniferous veneer

GOST 4.208-79: Quality rating system. Building. Timber glulam structures. Nomenclature of characteristics

GOST 8486-86: Coniferous sawn timber. Specifications

GOST 9077-82: Ground pulverized quartz. General specifications

GOST 9462-88: Round timber of broadleaf sorts

GOST 9463-88: Round wood products

GOST R 53292-2009: Fire retardant compositions and substances for wood. General requirements. Test methods

GOST R 56705-2015: Wooden structures. Terms and definitions

GOST R 56710-2015: Connections on the pasted cores for wooden structures. Specifications

GOST R 56711-2015: Pin type connection for wooden structures. Specifications

SNiP 2.03.11-85: Corrosion protection of buildings structures

SNiP 31-06-2009: Public buildings and constructions

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 16.13330.2011: Steel structures

SP 20.13330.2011: Loads and impacts

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 53-102-2004: General rules for steel structure design

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications

GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications

GOST 33807-2016: Safety of attractions. General requirements

GOST 34329-2017: Formworks. General specifications

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 52044-2003: Outer advertisement allocated alongside of highways and in territories of cities, towns and villages. General technical requirements concerning means of outer advertisement. Rules of allocation

GOST R 54523-2011: Port hydraulic structures. Rules of inspection and monitoring of the technical condition

GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements

GOST R 56711-2015: Pin type connection for wooden structures. Specifications

GOST R 56985-2016: Safety of amusement rides. Kart slides. General safety requirements

GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design

GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design

ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic

ODM 218.4.029-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Determination of the load-carrying capacity of wooden bridges

PNST 494-2020: Inland waterway transport. Infrastructure facilities. Embankments, retaining walls are semi-gravitational and gravitational. Features of the calculation and design of various gravity structures

SP 107.13330.2012: Greenhouses and hotbeds

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 14.13330.2018: Seismic building design code

SP 15.13330.2012: Masonry and reinforced masonry structures

SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation

SP 17.13330.2011: Roofs

SP 25.13330.2012: Soil bases and foundations on permafrost soils

SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 28.13330.2017: Protection against corrosion of construction

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 288.1325800.2016: Forest roads. Rules of design and construction

SP 299.1325800.2017: Ventilation systems of highway tunnels. Design rules

SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 64.13330.2017: Timber structures

SP 69.13330.2016: Underground excavations

SP 76.13330.2016: Electrical systems

SP 88.13330.2014: The protective shelters of civil defense

SP 91.13330.2012: Underground mine workings

SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!