SP 70.13330.2012
СП 70.13330.2012
|
|
Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
Несущие и ограждающие конструкции
Status: Effective
The set of rules applies to the production and acceptance of work performed in the construction and reconstruction of enterprises, buildings and structures in all sectors of the national economy: in the construction of monolithic concrete and reinforced concrete structures of heavy, very heavy, porous aggregates, heat-resistant and alkali-resistant concrete, in the production of on shotcrete and underwater concreting; in the manufacture of precast concrete and reinforced concrete structures in the construction site; when installing precast reinforced concrete, steel, wooden structures and structures made of lightweight efficient materials; when welding assembly connections of building steel and reinforced concrete structures, reinforcement joints and embedded products of monolithic reinforced concrete structures; in the construction of stone and reinforced stone structures made of ceramic and silicate bricks, ceramic, silicate, natural and concrete stones, brick and ceramic panels and blocks, concrete blocks.
Свод правил распространяется на производство и приемку работ, выполняемых при строительстве и реконструкции предприятий, зданий и сооружений во всех отраслях народного хозяйства: при возведении монолитных бетонных и железобетонных конструкций из тяжелого, особо тяжелого, на пористых заполнителях, жаростойкого и щелочестойкого бетона, при производстве работ по торкретированию и подводному бетонированию; при изготовлении сборных бетонных и железобетонных конструкций в условиях строительной площадки; при монтаже сборных железобетонных, стальных, деревянных конструкций и конструкций из легких эффективных материалов; при сварке монтажных соединений строительных стальных и железобетонных конструкций, соединений арматуры и закладных изделий монолитных железобетонных конструкций; при производстве работ по возведению каменных и армокаменных конструкций из керамического и силикатного кирпича, керамических, силикатных, природных и бетонных камней, кирпичных и керамических панелей и блоков, бетонных блоков.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Construction and Housing and Communal Services (Gosstroy of Russia),
12/25/2012
SKU: RUSS21078
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.52 Reinforced concrete and concrete structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
welding equipment »
Welding regulations »
Welding staff »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Manual welding »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.10 Walls. Partitions. Facades »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.01 Structures of buildings in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.20 Wooden structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.20 Wooden structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.30 Masonry and brickwork »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.30 Masonry and brickwork »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
As a Replacement Of:
SP 70.13330.2011: Bearing and enclosing structures
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
Federal Law 184-FZ: About technical regulation
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10180-2012: Concretes. Methods for strength determination using reference specimens
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10181-2000: Concrete Mixtures Test method
GOST 10181-2014: Concrete mixtures. Methods of testing
GOST 10243-75: Steel. Methods of test and estimation of macrostructure
GOST 10541-78: Automobile motor oils for carburetor engines
GOST 10690-73: Technical potassium carbonate (potash). Technical conditions
GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications
GOST 10832-91: Expanded pearlite sand and crushed stone. Specifications
GOST 10906-78: Square taper washers. Specifications
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 11052-74: Gypsum-alumina expanding cement
GOST 11371-78: Washers. Specifications
GOST 11533-75: Automatic and semiautomatic submerged arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 11534-75: Hand arc welding. Acute and blunt weld joints. Main types, design elements and dimensions
GOST 12.1.046-85: Occupational safety standards system. Building. Lighting of building sites
GOST 12.4.026-76: Signal colors and safety signs
GOST 12730.5-84: Concretes. Methods for determination of water tightness
GOST 12865-67: Expanded vermiculits.
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13087-81: Concretes. Method of abrasion test
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15164-78: Electroslag welding. Welded joints. Main types, design elements and dimensions
GOST 1581-96: Well Portland cements. Specifications.
GOST 15825-80: Coloured Portland cement. Specifications
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 17624-2012: Concrete. Ultrasonic method of strength determination
GOST 17624-87: Concrete. Ultrasonic method of strength determination
GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.
GOST 18442-80: Non-destructive testing. Capillary methods. General requirements
GOST 19906-74: Sodium nitrite technical. Technical conditions
GOST 20276-2012: Soils. Field methods for determining the strength and strain characteristics
GOST 20276-99: S o i l s. Methods for field determination of strength and strain characteristics
GOST 20799-88: Industrial oils Specifications
GOST 2081-2010: Carbamide. Specifications
GOST 2081-48: Technical urea
GOST 20850-84: Wooden laminated structures. General specifications
GOST 20910-90: Refractory concretes. Specifications
GOST 21104-75: Non-destructive testing. Ferrosonde method
GOST 21105-87: Non-destructive testing. Method of magnetic particle testing
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 22266-2013: Sulphate-resistant cements. Specifications
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 22690-88: Concretes. Determination of strength by mechanical methods of nondestructive testing
GOST 22845-85: Electrical passenger and freight elevators
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23407-78: Fencings for building sites. Specifications
GOST 23518-79: Cas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 23683-89: Hard petroleum paraffines
GOST 23732-2011: Water for concretes and cement mortars Technical specifications.
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 23858-79: Welded joints butt and T-formed of reinforcement steel bars. Ultrasonic methods of quality inspection. Acceptability requirements
GOST 24045-2010: Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24379.0-2012: Foundation bolts. General specifications
GOST 24379.0-80: Foundation bolts. General specification
GOST 24846-2012: Soils. Methods of measuring the strains of structures and building bases
GOST 25192-82: Concretes. Classification and general technical requirements
GOST 25225-82: Non-destructive testing. Welded joints of tubing. Magnetographic method
GOST 25246-82: Chemically resistant concretes. Specifications
GOST 25328-82: Masonry cement. Specifications.
GOST 25485-89: Cellular concretes. Specifications
GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications
GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications
GOST 25820-2000: Lightweight aggregates concretes. Specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26271-84: Flux-cored wire welding carbon and low-alloy steels. General specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications
GOST 26887-86: Platforms and ladders for civil engineering work. Specifications
GOST 27005-2014: Light-weight and cellular concretes. Rules for control and assessment density
GOST 27005-86: Light-weight and cellular concretes. Rules of average density control
GOST 27006-86: Concretes. Rules for mix proportioning
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 28013-98: Mortars. General specifications
GOST 28570-90: Concretes. Methods of strength evaluation on cores drilled from structures
GOST 30515-2013: Cements. General specifications
GOST 30515-97: Cements General specifications
GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31189-2015: Dry building binder mixes. Classification
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 31914-2012: High-strength heavy-weight and fine-grane concrete for situ-casting structures. Rules for control and quality assessment
GOST 3242-79: Welded joints
GOST 32495-2013: Aggregates, fines and its mixtures made from recycled reinforced and non-reinforced concrete. Specifications
GOST 32496-2013: Fillers porous for light concrete. Specifications
GOST 32803-2014: Self-stressing concrete. General specifications
GOST 379-95: Silicate brick and stones. Specifications
GOST 450-77: Calcium chloride technical. Technical conditions
GOST 530-2007: Ceramic bricks and stones. General specifications
GOST 530-2012: Ceramic brick and stone. General specifications
GOST 5578-94: Slag crushed stone and slag sand of ferrous and non-ferrous metallurgy for concretes. Specifications
GOST 5686-2012: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 5686-94: Sоils. Fiеld tеst mеthоds bу рilеs
GOST 5802-86: Mortars. Test methods.
GOST 6402-70: Lock washers. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7076-99: Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance
GOST 7473-2010: Fresh concrete. Specifications
GOST 7473-94: Ready-mixed concrete. Specifications
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 7566-94: Metal products
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 828-77: Sodium nitrate technical. Technical conditions
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-2014: Sand for construction works. Specifications
GOST 8736-93: Sand for construction works. Specifications
GOST 9087-81: Welding melted fluxes
GOST 9206-80: Diamond powders
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 965-89: Portland cements, white. Specification
GOST 969-91: Alumina and high alumina cements. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51254-99: Assembly tools for standardized tightening of threaded connections. Torque wrenches. Basic specifications
GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications
GOST R 51263-99: Concrete with polysterene aggregates. Specifications
GOST R 51524-99: Electromagnetic compatibility of technical equipment. Adjustable speed electrical power drive systems. Requirements and test methods
GOST R 51634-2000: Motor oils for autotractors. General technical requirements
GOST R 52085-2003: Formworks. General specifications
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
GOST R 52752-2007: Formworks. Test methods
GOST R 53697-2009: Non-destructive testing. General terms and definitions
GOST R 53922-2010: Diamond and from cubic boron nitride (elbon) powders. Grain and grain size distribution of grinding powders. Test of grain size distribution
GOST R 55224-2012: Cements for the transport construction. Specifications
GOST R 55724-2013: Non-destructive Testing. Welded Joints. Ultrasonic Methods
GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications
GOST R 56585-2015: Pigments for concretes and mortars. General Specifications
GOST R 56592-2015: Mineral Admixtures for Concretes and mortars. General specifications
GOST R 56593-2015: Mineral admixtures for concretes and mortars. Test methods
GOST R 56596-2015: Services to the public. Services in the field of water sports. Part 2. Rental services of sea and river vessels
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 56727-2015: Self-stressing cements. Specifications
GOST R ISO 3452-1-2011: Non-destructive testing. Penetrant testing. Part 1. General principles
GOST R ISO 5577-2009: Non-destructive testing. Ultrasonic inspection. Vocabulary
GOST R ISO 9934-1-2011: Non-destructive testing. Magnetic particle testing. Part 1. General principles
GOST R ISO/IEC 17025-2006: General requirements for the competence of testing and calibration laboratories
MDS 53-1.2001: Recommended Practice for Installation of Steel Structural Elements
PB 10-382-00: Rules of hoisting crane structure and safe operation. Series 10. Revision 7.
RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 3.03.01-87: Bearing and enclosing structures
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2011: Steel structures
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 24.13330.2011: Pile foundations
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 45.13330.2012: Earth structures, bases and foundations
SP 46.13330.2012: Bridges and pipes
SP 48.13330.2011: Organization of construction
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
The Document is Referenced By:
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
GOST 17032-2022: Horizontal steel tanks for petroleum products. Specifications
GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications
GOST 26429-2018: Steel structures of suspended transport tracks. Specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 34823-2022: Trunk pipeline transport of oil and petroleum products. Organization and performance of construction and installation works on the territory of permafrost soils spreading
GOST R 51872-2019: Geodetic Executive Documentation. Execution Rules
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards
GOST R 57991-2017: Trunk pipeline transport of oil and oil products. Steel piles of pipes used for foundation construction of above-ground pipelines supports. General specifications
GOST R 58088-2018: Mining equipment. Mine parachutes for cages. Specifications
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58341.12-2022: Structures of Buildings and Structures of Nuclear Power Plants. Accounting of actually worked out and estimation of residual resource
GOST R 58623-2019: The main pipeline transport of oil and oil products. Vertical cylindrical steel tanks. Technical Operation Rules
GOST R 58654-2019: Automobile roads for general use. Spiral corrugated metal pipes. Specifications
GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications
GOST R 59495-2021: Translucent enclosing constructions. Fastening of window and balcony door units in skylights. Rules and control of work performance
GOST R 59583-2021: Translucent enclosing constructions. Glazing of balconies. Rules and control of installation work
GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements
GOST R 59622-2021: Public roads for motor vehicles. Bridge structures. Design of reinforced concrete elements
GOST R 59626-2022: Public roads Special auxiliary structures and devices for bridge construction. Design rules. General requirements
GOST R 59684-2021: Steel sandwich panels of element-by-element assembly. Technical conditions
GOST R 59688-2022: Two-layer steel panels for building coverings with polyurethane foam insulation. Technical conditions
GOST R 59924-2021: Joint assemblies of panels for timber construction. Types, designs, technical requirements and methods of inspection
GOST R 59936-2021: Large-board formwork. General specifications
GOST R 59963-2021: Monolithic steel-fiberconcrete waterproofing of underground reinforced concrete structures of nuclear power plants. Manufacturing technology and quality control
GOST R 70095-2022: Engineering networks of buildings and structures. Installation and commissioning of refrigeration systems. Rules and performance control
GOST R 70108-2022: Executive documentation. Formation and maintenance in electronic form.
GOST R 70132-2022: Construction work and typical technological processes. Assembly of bolted joints of building metal structures. Rules and control of work performance
GOST R 70192-2022: Dry frame cladding frame ceilings. Steel cold-formed galvanized steel frame flooring system. General technical requirements
GOST R 70222-2022: Heavy concretes. Technical conditions
GOST R 70266-2022: Transparent enclosing structures. Sealing of joints to load-bearing structures and wall openings. Rules and control of work performance
GOST R 70344-2022: Translucent enclosing structures. Works on the construction of skylights. General requirements for the manufacture and control of works
GOST R 70346-2022: "Green" standards. Multifamily residential "green" buildings. Evaluation methodology and criteria for design, construction and operation
GOST R 70447-2022: Reinforced Concrete Structures with Looped Joints of Reinforcement for Nuclear Power Facilities. Design and calculation requirements
GOST R 70448-2022: Translucent enclosing structures in low-rise residential buildings. Rules and control of installation works
GOST R 70461-2022: Construction works and typical technological processes. Steel structures made of pipes and closed profiles. Rules and control of installation work
GOST R 70465-2022: Typical technological and organizational processes. Welding of steel building structures. Requirements for the organization and execution of work in construction site conditions. Quality control
GOST R 70690-2023: Public roads. Laser scanning. Requirements for laser scanning data at different stages of the life cycle of a highway
GOST R 70726-2023: Modular swimming pools. General technical conditions
GOST R 70736-2023: Engineering networks of buildings and structures internal. Installation and commissioning of fan coils. The rules and control of the work
GOST R 70818-2023: Outdoor engineering networks. Autonomous sewerage systems with septic tanks and underground filtration of waste water. Rules of installation and control of work performance
GOST R 70824-2023: Engineering networks of buildings and structures internal. Installation of ventilation systems of multi-apartment residential buildings. Rules and control of work performance
GOST R 70831-2023: Oil and gas industry. Oil and gas field offshore stationary structures. Design and construction rules
GOST R 71541-2024: Engineering networks of buildings and structures internal. Refrigerating centers. Installation and commissioning works. Rules, execution control, requirements to the results of works
Letter 10950-OG/16: On the presence of a typo in SP 70.13330.2012
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
Letter 6383-OG/16: On the application of certain provisions of SP 70.13330.2012
MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps
Methodical recommendations 2-4-71-37-11: recommendations for the preparation of documentation for deregistration (type change) of civil defense protective structures
ODM 218.2.016-2011: Guidelines for the design and installation of bored piles with increased bearing capacity along the ground
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction
ODM 218.2.098-2018: Guidelines for the use of a prestressed homogeneous system for strengthening slopes based on a high-strength steel network (more than 1770 N
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.1.002-2020: Typical technical solutions for embankments on pile foundations with a flexible grillage made of geosynthetic materials
ODM 218.3.103-2018: Recommendations for the use of screw piles on roads
ODM 218.6.018-2016: Recommendations on the rules for the use, arrangement and operation of cable and combined road fences on public roads
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 30/pr: On approval of the Plan of development and approval of sets of rules and actualization of previously approved sets of rules for 2023.
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
PNST 310-2018: Roads are public. Bridges and pipes road. Methods for determining the geometric and physical parameters
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
R-NP SRO SSK 02-2015: Recommendations for concrete works in winter period
R-SSK 01-2016: Recommendations on the procedure for keeping a general log of work performance during construction, reconstruction, and capital repair of capital construction facilities
R-SSK 03-2016: Recommendations. Assessment of energy efficiency of buildings. Calculation and experimental control of standardized energy performance of buildings
R-SSK 04-2016: Recommendations on the procedure for maintaining special journals for recording the performance of work during construction, reconstruction, overhaul of capital construction facilities
Safety Guide: Recommendations on arrangement and safe operation of process pipelines
Safety Guide: Recommendations on technical diagnostics of welded vertical cylindrical tanks for oil and petroleum products
SP 113.13330.2023: Parking lots
SP 120.13330.2012: Subway systems
SP 122.13330.2023: Railroad and road tunnels
SP 124.13330.2012: Heating networks
SP 126.13330.2012: Survey operations in construction
SP 129.13330.2019: External networks and water supply and sewerage facilities
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2011: Steel structures
SP 16.13330.2017: Steel structures
SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation
SP 22.13330.2016: Soil bases of buildings and structures
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 250.1325800.2016: Building and structures. Protection against groundwater
SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 260.1325800.2023: Thin-walled steel structures made of cold-formed galvanized profiles and corrugated sheets. Design rules
SP 265.1325800.2016: Manifold for engineering networks
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 294.1325800.2017: The construction of steel. Design rules
SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules
SP 303.1325800.2017: One-story industrial buildings. Operating rules
SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules
SP 306.1325800.2017: Multifunctional shopping complex. Operating rules
SP 307.1325800.2017: Buildings and premises for the storage and processing of agricultural products the rules of operation
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 316.1325800.2017: Container terminals. Regulations of projecting
SP 324.1325800.2017: Multi-storey industrial buildings. Operating rales
SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling
SP 332.1325800.2017: Sport constructions. Rules of design
SP 335.1325800.2017: Large-panel construction system. Design rules
SP 339.1325800.2017: Designs from cellular concrete. Rules of design
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design
SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction
SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules
SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design
SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 37.13330.2012: Industrial transport
SP 372.1325800.2018: Multicompartment residential buildings. Operation rules
SP 374.1325800.2018: Buildings and premises for the storage and processing of agricultural products. Accidental actions
SP 382.1325800.2017: Glued laminated wooden structures on glued rods. Calculation methods
SP 384.1325800.2018: Tent structures. Design rules
SP 386.1325800.2018: Light transparent polycarbonate structures. Design rules
SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements
SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules
SP 414.1325800.2018: Fixed formwork. Design rules
SP 418.1325800.2018: Buildings and facilities are sports. Terms of Use
SP 430.1325800.2018: Monolithic structural systems. Design rules
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 45.13330.2012: Earth structures, bases and foundations
SP 45.13330.2017: Earthworks, grounds and footings
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 457.1325800.2019: Sports facilities for cycling. Design rules
SP 46.13330.2012: Bridges and pipes
SP 469.1325800.2019: The construction of livestock, poultry and animal husbandry enterprises. Terms of Use
SP 470.1325800.2019: Steel structures. Work Rules
SP 471.1325800.2019: Building Information Modeling. Quality control of construction works
SP 48.13330.2019: Organization of construction. SNiP 12-01-2004
SP 54.13330.2016: Multicompartment residential buildings
SP 56.13330.2021: Industrial buildings SNiP 31-03-2001
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
SP 64.13330.2011: Wooden structures.
SP 64.13330.2017: Timber structures
SP 71.13330.2017: Insulation and finish coatings
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 74.13330.2023: Heat networks.
SP 76.13330.2016: Electrical systems
SP 78.13330.2012: Automobile roads
SP 80.13330.2016: River hydraulie engineering facilities
SP 81.13330.2017: The reclamation systems and construction
SP 83.13330.2016: Industrial furnaces and brick chimneys
SP 84.13330.2016: Tramways
SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete
ST-NP SRO SSK-02-2013: Evaluation of the energy performance of buildings. Monitoring compliance with the requirements of thermal protection of external building envelopes
ST-NP SRO SSK-03-2013: Rules for monitoring and assessing the strength of concrete in monolithic structures
ST-NP SRO SSK-04-2013: Temperature-strength control of concrete during the construction of monolithic structures in the winter
STO 95 12005-2017: Objects of use of atomic energy. Concrete work in the construction of the protective shell of the reactor installation of nuclear power plants. Basic requirements and quality control organization
STO 95 12009-2017: Objects of use of atomic energy. Construction of nuclear power plants. Rules of the combined construction and installation works
STO SSK 02-2016: Assessment of the energy efficiency of buildings during construction. Monitoring compliance with the requirements of thermal protection of external building envelopes and specific annual consumption of thermal energy
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
Customers Who Viewed This Item Also Viewed:
|
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.