imgalt

SP 101.13330.2012

СП 101.13330.2012

Retaining walls, navigation locks, fish passing and fish protection facilities

Подпорные стены, судоходные шлюзы, рыбопропускные и рыбозащитные сооружения

Status: Effective

The set of rules applies to the design of newly constructed and reconstructed hydraulic structures: retaining walls, navigable sluices, fish passage and fish protection structures. The design of structures intended for construction at the seaside endings of inland waterways should be carried out taking into account the requirements reflecting the specific conditions of the sea, including the hydrological regime and the aggressiveness of sea water. In projects of structures intended for construction in seismic areas, in areas of permafrost, subsiding, swelling soils, under conditions of karst formation, landslides and mudflows, additional requirements should be observed for such structures.

Свод правил распространяется на проектирование вновь строящихся и реконструируемых гидротехнических сооружений: подпорных стен, судоходных шлюзов, рыбопропускных и рыбозащитных сооружений. Проектирование сооружений, предназначенных для строительства на приморских окончаниях внутренних водных путей, следует осуществлять с учетом требований, отражающих специфические условия моря, в том числе гидрологический режим и агрессивность морской воды. В проектах сооружений, предназначенных для строительства в сейсмических районах, в районах распространения вечномерзлых, просадочных, набухающих грунтов, в условиях образования карста, оползней и селей, должны соблюдаться дополнительные требования, предъявляемые к таким сооружениям.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Regional Development of the Russian Federation, 6/30/2012

SKU: RUSS21079

Price: $1,701.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 3. Normative documents on urban planning, buildings and constructions » к.33 Hydrotechnical and meliorative constructions »

PromExpert » SECTION IV. INDUSTRIAL SAFETY » II Industrial safety requirements for operation of a hazardous production facility » 4 Safety requirements for hydraulic structures » 4.4 Hydraulic structures of water facilities industry »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.140 Construction of waterways, ports and dams »

National standards » 93 CIVIL CONSTRUCTION » 93.140 Construction of waterways, ports and dams »

ISO classifier » 93 CIVIL CONSTRUCTION » 93.160 Construction of hydraulic facilities »

National standards » 93 CIVIL CONSTRUCTION » 93.160 Construction of hydraulic facilities »


The Document is Replaced With:

SP 101.13330.2023: Retaining walls, shipping locks, fish passage and fish protection structures

As a Replacement Of:

SP 101.13330.2011: Retaining walls, navigation locks, fish passing and fish protection facilities

The Document References:

Code 24-FZ: Code of Inland Water Transport of the Russian Federation

Code 74-FZ: Water Code of the Russian Federation

Federal Law 117-FZ: Safety of Hydraulic Structures

Federal Law 166-FZ: On fishing and conservation of aquatic biological resources

Federal Law 184-FZ: About technical regulation

Federal Law 261-FZ: On energy conservation and on improving energy efficiency and on amendments to certain legislative acts of the Russian Federation

Federal Law 52-FZ: Public Sanitary and Epidemiological Well-Being

Federal Law 7-FZ: Environmental Protection

GOST 19185-73: Hydraulic engineering. Basic concepts. Terms and definitions

GOST 26775-97: Clearances of navigable bridge spans in the inland waterways. Norms and technical requirements

SNiP 2.06.07-87: Retaining walls, ship locks, fish ways, and fish-protection devices

SP 14.13330.2011: Construction in seismic regions.

SP 16.13330.2011: Steel structures

SP 20.13330.2011: Loads and impacts

SP 22.13330.2011: Buildings and structures foundations

SP 23.13330.2011: Foundation of hydraulic structures

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants

SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84

SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)

SP 40.13330.2012: Concrete and reinforced concrete dams

SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures

SP 58.13330.2012: Hydraulic Structures. Basic statements

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

The Document is Referenced By:

Amendment 4: Amendment to SP 43.13330.2012 SNiP 2.09.03-85 Structures of industrial enterprises

GOST R 55615.3-2013: Renewable power engineering. Tidal power plants. Part 3. Sea hydraulic structures. Requirements for loads and actions

GOST R 56828.34-2017: Best available techniques. Resource conservation. Methodology of management decisions for conservation of aquatic bioresources and their habitats

GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design

GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design

GOST R 59626-2022: Public roads Special auxiliary structures and devices for bridge construction. Design rules. General requirements

GOST R 70245-2022: Inland water transport. Infrastructure facilities. Operation of embankments, semi-gravity and gravity retaining walls. Control of the technical condition of various semi-gravity structures. Basic requirements

GOST R 70567-2022: Land reclamation systems and structures. Pumping stations on polder systems. Design standards

GOST R 70831-2023: Oil and gas industry. Oil and gas field offshore stationary structures. Design and construction rules

ODM 218.2.101-2019: Guidelines for the design of plan elements, longitudinal and transverse profiles of roads

ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures

Order 1042/pr: On approval of methodological recommendations for the development of norms and rules for the improvement of territories of municipalities

Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".

Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687

Order 753: On approval of lists of acts containing mandatory requirements, the compliance with which is assessed during control measures during federal state control (supervision) in the field of fisheries and the preservation of aquatic biological resources and state supervision of merchant shipping in terms of ensuring the safety of navigation of fishing vessels in fishing areas at fishing

Order 909/pr: On approval of the Plan for development and approval of sets of rules and actualization of previously approved sets of rules for 2022.

PNST 493-2020: Inland waterway transport. Infrastructure facilities. Embankments, thin-walled retaining walls (sheet piling). Features of the calculation and design of various structures

PNST 494-2020: Inland waterway transport. Infrastructure facilities. Embankments, retaining walls are semi-gravitational and gravitational. Features of the calculation and design of various gravity structures

Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985

Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"

SP 100.13330.2016: The reclamation systems and construction

SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.

SP 277.1325800.2016: Costal protection constructions. Design rules

SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction

SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*

SP 342.1325800.2017: Protection of railway track and structures from the adverse natural phenomena. Rules of engineering and construction

SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation

SP 357.1325800.2017: Concrete hydraulic structures. Rules of works and acceptance of works

SP 369.1325800.2017: Fixed offshore platforms. Design principles

SP 398.1325800.2018: Quays. Urban Planning Rules

SP 43.13330.2012: Structures for industrial installations

SP 436.1325800.2018: Engineering protection of territories, buildings and structures from landslides and landslides. Design rules

SP 58.13330.2012: Hydraulic Structures. Basic statements

SP 58.13330.2019: Waterworks. Key Points

SP 82.13330.2016: Territory improvement

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!