SP 126.13330.2012
СП 126.13330.2012
|
|
Survey operations in construction
Геодезические работы в строительстве
Status: Not effective - No longer valid. By order of the Federal Agency for Technical Regulation and Metrology No. 831 dated 04/17/2019, the order of the Federal Agency for Technical Regulation and Metrology dated March 30, 2015 No. 365 was declared invalid.
The set of rules applies to the production of geodetic works, monitoring the accuracy of the geometric parameters of structures being erected, monitoring their displaceability and deformability.
Свод правил распространяется на производство геодезических работ, контроль точности геометрических параметров возводимых конструкций, мониторинг их смещаемости и деформативности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21096
The Product is Contained in the Following Classifiers:
Highways (Max) »
Engineering surveys for construction of roads and artificial structures »
2. Engineering and geodetic surveys »
2.1. General questions of geodetic surveys »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
1. Organizational and methodological regulatory documents »
k.12 Production »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.1 General requirements for use of subsoil »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical aspects »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical Aspects »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
91.040.01 Construction in general »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.200 Construction technology »
91.200.20 Engineering surveys for construction »
The Document is Replaced With:
SP 126.13330.2017: Geodetic works in building
As a Replacement Of:
SP 126.13330.2011: Geodetic works in building
The Document References:
Federal Law 184-FZ: About technical regulation
GKINP 17-195-99: Instructions for the technological calibration of geodetic instruments
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 24846-81: Soils. Measuring methods of strains of structures and buildings bases
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 7502-98: Measuring metal tapes. Specifications
GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules
MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings
MGSN 4.19-2005: Temporary norms and standards for design of multifunctional high-rise buildings and buildings complexes in Moscow. Part 2. (Part 1 is sold separately as MGSN 4.19-05)
P 648: Guide to field observation of deformations of hydraulic structures and their bases by geodetic methods
RD 11-02-2006: Requirements to the contents and as-built documentation for construction, reconstruction, major overhaul of capital construction facilities and the requirements applying to acts for the performed work, structures, utility network sections
SNiP 12-01-2004: Organization of construction
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 3.01.03-84: Survey operations in construction
SNiP 3.03.01-87: Bearing and enclosing structures
SP 11-104-97: Collection of rules for engineering surveys for construction. Engineering-geodetic surveys for construction
SP 13-102-2003: Rules of inspection of bearing structures of buildings and facilities
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 48.13330.2011: Organization of construction
SP 50-101-2004: Design and construction of soil bases and foundations for buildings and structures
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
The Document is Referenced By:
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 56905-2016: Performance of measurement, engineering-geodetic works on objects of the cultural heritage. General requirements
GOST R 57208-2016: Tunnels and subways. Rules of inspection and elimination of defects and damages under operation
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines
MRR 3.2.85-15: Methods for determining the cost of measuring works by stereophotogrammetry and laser scanning, carried out with the involvement of Moscow budget funds
MRR 3.4-16: Measurement work by stereophotogrammetry and laser scanning
ODM 218.2.030-2013: Guidelines for evaluating landslide hazard on highways
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.3.049-2015: Guidelines for the use of multi-layer composite drainage materials (geodren) to drain and strengthen road structures in the construction and reconstruction of roads
ODM 218.3.093-2017: Methodical recommendations on the use of a polyurethane binder for strengthening slopes, recesses, bulk structures, cones of bridges and overpasses
ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads
ODM 218.4.031-2016: Recommendations on the organization and conduct of departmental control (monitoring) of quality during the performance of road works on federal public roads
ODM 218.6.031-2018: Guidelines for improving the reliability of protective and fortifications in emergency situations and natural hazards
ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector
PNST 55-2015: Underground utilities. Determination of location and depth with non-destructive methods
R-SSK 05-2016: Recommendations on the procedure, rules for the development, coordination and approval of work projects using lifting structures
SP 120.13330.2012: Subway systems
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 22.13330.2016: Soil bases of buildings and structures
SP 246.1325800.2016: Code practice. Regulation on the supervision of authors for construction of buildings and structures
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 306.1325800.2017: Multifunctional shopping complex. Operating rules
SP 317.1325800.2017: Engineering geodetic survey for construction. General regulations for execution of work
SP 341.1325800.2017: Underground engineering communications. Lining of by a method of the horizontal directional drilling
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 365.1325800.2018: Vertical cylindrical steel tanks for storage of oil products. Rules of work’s production and acceptance under installation
SP 392.1325800.2018: Pipelines trunk and field for oil and gas. Executive documentation during construction. Forms of requirements for maintenance and execution
SP 410.1325800.2018: Pipelines trunk and field for oil and gas. Permafrost construction and work control
SP 45.13330.2012: Earth structures, bases and foundations
SP 46.13330.2012: Bridges and pipes
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 499.1325800.2021: Engineering protection of territories, buildings and structures from karst-suffusion processes. Design rules
SP 78.13330.2012: Automobile roads
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
SP 81.13330.2017: The reclamation systems and construction
SP 83.13330.2016: Industrial furnaces and brick chimneys
SP 86.13330.2014: Main (Trunk) pipelines
STO 95 12008-2017: Objects of use of atomic energy. Construction of nuclear power plants. Requirements for handling executive documentation
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.