SP 128.13330.2012
СП 128.13330.2012
|
|
Aluminium structures
Алюминиевые конструкции
Status: Superseded in part. Not applicable by order of the Ministry of Construction of Russia No. 948
The set of rules sets the standards for the design of building aluminum structures (or structures made of aluminum alloys) of buildings and structures. The standards do not apply to the design of aluminum structures of bridges and structures of buildings and structures subjected to multiple loads (fatigue strength), as well as the direct effects of moving or dynamic loads or temperatures above 100 degrees Celsius. When designing structures that are in special operating conditions, structures of unique buildings and structures, as well as special types of structures, it is necessary to comply with the requirements stipulated by the relevant regulatory documents, which reflect the features of these structures.
Свод правил устанавливает нормы проектирования строительных алюминиевых конструкций (или конструкций из алюминиевых сплавов) зданий и сооружений. Нормы не распространяются на проектирование алюминиевых конструкций мостов и конструкций зданий и сооружений, подвергающихся многократному воздействию нагрузок (усталостная прочность), а также непосредственному воздействию подвижных или динамических нагрузок или воздействию температуры выше 100 градусов Цельсия. При проектировании конструкций, находящихся в особых условиях эксплуатации, конструкций уникальных зданий и сооружений, а также специальных видов конструкций необходимо соблюдать требования, предусмотренные соответствующими нормативными документами, в которых отражены особенности работы этих конструкций.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
12/29/2011
SKU: RUSS21097
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
The Document is Replaced With:
SP 128.13330.2016: Aluminium structures
As a Replacement Of:
SP 128.13330.2011: Aluminium structures
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10157-79: Gaseous and liquid argon. Specifications
GOST 10299-80: Button-head rivets classes B and C. Specifications
GOST 10300-80: Countersunk-head rivets classes B and C. Specifications
GOST 10301-80: Round-top countersunk-head rivets classes B and C. Specifications
GOST 10304-80: Rivets
GOST 10619-80: Self-tapping countersunk screws for metals and plastics. Design and dimensions
GOST 10620-80: Self-tapping raised countersunk head screws for metals and plastics. Design and dimensions
GOST 10621-80: Self-tapping round-head screws for metals and plastics. Design and dimensions
GOST 10906-78: Square taper washers. Specifications
GOST 11371-78: Washers. Specifications
GOST 11738-84: Hexagon socket head cap screws, accuracy class A. Construction and dimensions
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 14776-79: Arc welding. Button welds. Main types, design elements and dimensions
GOST 14806-80: Arc welding of aluminium and aluminium alloys in inert gases. Welded joints. Main types, design elements and dimensions
GOST 14838-78: Aluminum wite
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 17473-80: Half-rounded head screws, product grades A and B. Design and dimensions
GOST 17475-80: Countersunk head screws product grades A and B. Construction and dimensions
GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.
GOST 18123-82: Washers
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications
GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 22353-77: High strength bolts of product grade B. Construction and dimensions
GOST 30403-96: Building structures fire hazard test method
GOST 4.221-82: Quality ratings system. Bulding. Aluminium structures. Nomenclature of characteristics
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 6402-70: Lock washers. Specifications
GOST 7798-70: Hexagon bolts, product grade B. construction and dimensions
GOST 7871-75: Aluminum and aluminium alloy welding wire
GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST R 21.1101-2009: System of design documents for construction. Main requirements for design and working documents
GOST R 52627-2006: Bolts, screws and studs. Mechanical properties and test methods
GOST R 52628-2006: Nuts. Mechanical properties and test methods
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.
GOST R 53293-2009: Fire hazard of substances and materials. Materials, substance and fire protective means. Identification by thermal analysis methods
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
SNiP 2.03.06-85: Aluminium structures
SNiP 2.03.11-85: Corrosion protection of buildings structures
SNiP 2.09.03-85: Structures for industrial installations
SP 131.13330.2011: BUILDING CLIMATOLOGY
SP 16.13330.2011: Steel structures
SP 2.13130.2009: Systems of fire protection. Fire-resistance security of protecting units
SP 20.13330.2011: Loads and impacts
SP 28.13330.2010: Protection against corrosion of construction
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 4.13130.2009: Fire containment at protected facilities. Requirements to spatial planning and structural solutions
SP 43.13330.2010: Constructions of the industrial enterprises
SP 43.13330.2012: Structures for industrial installations
The Document is Referenced By:
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST R 52044-2003: Outer advertisement allocated alongside of highways and in territories of cities, towns and villages. General technical requirements concerning means of outer advertisement. Rules of allocation
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
RMD 56-05-2015 Saint-Petersburg: Recommendations for the design, manufacture and installation of translucent structures with safety glazing (2016 edition)
SP 128.13330.2016: Aluminium structures
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.