SP 131.13330.2012
СП 131.13330.2012
|
|
Building climatology
Строительная климатология
Status: Partially effective. Not applicable by order of the Ministry of Construction of Russia No. 763
The set of rules establishes the climatic parameters that are used in the design of buildings and structures, heating, ventilation, air conditioning, water supply, when planning and building urban and rural settlements.
Свод правил устанавливает климатические параметры, которые применяют при проектировании зданий и сооружений, систем отопления, вентиляции, кондиционирования, водоснабжения, при планировке и застройке городских и сельских поселений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
6/30/2012
SKU: RUSS21098
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
K.23. Internal climate and protection against harmful effects »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
1 Air Protection »
1.3 Requirements for protection of atmospheric air in carrying out activities »
1.3.2 Requirements for protection of atmospheric air during design, placement, construction, reconstruction and operation of facilities »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
I Environmental-legal and economic-legal mechanisms for environmental protection »
1 Management infield of environmental protection and environmental management »
1.5 Environmental monitoring and control »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.040 Construction »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.99 Protection of buildings, inside and out, other aspects »
The Document is Replaced With:
SP 131.13330.2018: Construction Climatology
As a Replacement Of:
SP 131.13330.2011: BUILDING CLIMATOLOGY
The Document References:
Federal Law 184-FZ: About technical regulation
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
The Document is Referenced By:
Application manual SP 12.13130.2009: The manual on the application of SP 12.13130.2009 "Definition of categories of premises, buildings and outdoor installations for explosion and fire hazard"
GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications
GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications
GOST 20054-2016: Concrete non-pressure pipes. Specifications
GOST 20425-2016: Concrete Tetrapod for Costal Protecting Installations
GOST 25697-2018: Reinforced concrete slabs for balconies and loggias. General specifications
GOST 31174-2017: Gates of metall. General specifications
GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 32494-2013: Buildings and constructions. The method of mathematic simulation for temperature and humidity of protecting constructions
GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials
GOST 33799-2016: Railway telecommunications. Suspension rules of self-supporting optical waveguide cable on railway contact-line masts and power lines with voltage over 1000 V
GOST 34027-2016: Gas supply system. Gas main pipeline transportation. Mechanical safety. Assigning of safe operation life for linear part of gas main pipeline
GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST 8717-2016: Concrete and reinforced concrete steps. Specification
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 948-2016: Reinforced concrete jumpers for buildings with brick walls. Specification
GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods
GOST R 42.4.02-2015: Civil defence. Modes of radiation protection in case of accidents at nuclear facilities
GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.
GOST R 53301-2013: Fire dampers of ventilation systems. The test method for the fire resistance
GOST R 53301-2019: Valves for fire ventilation systems. Fire test method
GOST R 54964-2012: Conformity assessment. Ecological requirements for estate properties
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55338-2012: Masonry and masonry products. Methods for determining estimates of the thermal protection
GOST R 55615.3-2013: Renewable power engineering. Tidal power plants. Part 3. Sea hydraulic structures. Requirements for loads and actions
GOST R 55912-2013: Climatology building. Product indicators of the exterior environment
GOST R 55913-2013: Buildings and constructions. The nomenclature of climatic parameters for the calculation of the heat power of the heating system
GOST R 55913-2020: Buildings and constructions. Nomenclature of climatic parameters for calculating the heat output of the heating system
GOST R 56502-2015: Environment design systems of new buildings. Energy efficiency assessment in the design
GOST R 56503-2015: Energy performance of buildings. Calculation of energy use
GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications
GOST R 56685-2015: Trunk pipelines for oil and oil products transportation. Fittings for diameters from 530 to 1220 mm. General specifications
GOST R 56707-2015: Facade’s thermo insulation composite systems with external mortar layers. General specifications
GOST R 56719-2015: Liquefied natural gas. Sampling
GOST R 56926-2016: Window and balcony constructions of different functional purpose for residential buildings. General specifications
GOST R 57942-2017: Polymer composite sheet piles. General technical requirements and test methods
GOST R 58067-2018: Maintenance of ships under construction, refit and repair. Heating systems of ship’s compartments. Requirements
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 58112-2018: Petroleum and natural gas industries. Arctic operations. Ice management. Physical environmental data collection
GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements
GOST R 58213-2018: Oil and gas industry. Arctic operations. Onshore Logistics Operations
GOST R 58335-2018: Unified energy system and isolated energy systems. Operational dispatch control. Automatic limitation of frequency reduction during emergency deficit of active power. Norms and Requirements
GOST R 58760-2019: Mobile buildings (inventory). General specifications
GOST R 58883-2020: Hinged facade ventilated systems. General rules for calculating substructures
GOST R 58901-2020: Bent steel sheet profiles with trapezoidal corrugations for construction. Method for calculating the bearing capacity
GOST R 59657-2021: Hexabits for coastal protection and protective structures. Technical conditions
GOST R 59939-2021: Buildings and structures. Method for determination of resistance to heat transfer in full-scale conditions
GOST R 70091-2022: Covers and grates of drainage channels and trays for laying engineering communications. General technical requirements and control methods
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
Methodical manual: Building Design for Refrigerators
ODM 218.2.018-2012: Guidelines for determining the required fleet of road maintenance equipment for the maintenance of roads in the development of projects for the maintenance of roads
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.070-2016: Guidelines for the design, installation and maintenance of seismic protective devices of bridges on highways
ODM 218.2.082-2017: Guidelines for conducting hydraulic calculations of small ISSO on roads
ODM 218.2.093-2019: Guidelines for assessing the technical condition and confirming the effectiveness of the use of structures made of polymer composite materials on roads
ODM 218.2.097-2019: Recommendations on the use of geo-environmental protection technologies in the design, construction and operation of roads
ODM 218.3.036-2013: Recommendations for the technology of rehabilitation of cracks and seams in existing road surfaces
ODM 218.3.037-2014: Recommendations for monitoring the strength of cement concrete pavements and foundations of roads by sample
ODM 218.3.043-2015: Guidelines for the use of natural belite sludge in the pavement layers
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads
ODM 218.3.110-2019: Rules for the development of road maintenance projects
ODM 218.3.119-2019: Guidelines for the use of non-rigid road pavement with bases made of reinforced or knitted stone materials and soils
ODM 218.4.026-2016: Recommendations for determining the carrying capacity of operated bridges on public roads. Concrete and reinforced concrete structures
ODM 218.4.028-2016: Recommendations for determining the carrying capacity of existing bridges on public roads. Support parts, supports and foundations
ODM 218.4.029-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Determination of the load-carrying capacity of wooden bridges
ODM 218.8.012-2019: Guidelines (guidance) on the predictive assessment of environmental impact during the construction and operation of public roads
PNST 27-2015: Automobile roads for general use. Artificial lighting. Norms and design methods
PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications
RD-APK 1.10.01.03-12: Guidelines for the technological design of farms and cattle farms (farms)
RD-APK 1.10.02.04-12: Guidelines for technological design of pig farms and complexes
RD-APK 1.10.04.03-13: Engineering Design Standards for Horse Raising Facilities
RD-APK 1.10.05.04-13: Guidelines for technological design of poultry enterprises
RD-APK 1.10.07.01-12: Methodical recommendations on the technological design of veterinary facilities for livestock, animal, poultry and peasant (farmer) farms
RD-APK 1.10.17.01-15: Guidelines for technological design of enterprises for the production of animal feed
RD-APK 3.10.01.03-17: Methodological manual on the design of storm sewage facilities of livestock enterprises
RD-APK 3.10.07.02-14: Methodological guide for veterinary examination of projects of livestock facilities
RMD 23-16-2019 St. Petersburg: Recommendations for energy efficiency of residential and public buildings
RMD 23-27-2017 Sankt-Peterburg: Recommendations for normalizing the temperature and humidity conditions of unheated attic spaces
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
R-NP SRO SSK 02-2015: Recommendations for concrete works in winter period
R-SSK 03-2016: Recommendations. Assessment of energy efficiency of buildings. Calculation and experimental control of standardized energy performance of buildings
SP 104.13330.2016: Ground protection from flooding and underflooding
SP 107.13330.2012: Greenhouses and hotbeds
SP 108.13330.2012: Plants, buildings and constructions of storage and grain processing
SP 109.13330.2012: Cold storage units
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 120.13330.2012: Subway systems
SP 121.13330.2012: Aerodromes
SP 122.13330.2012: Railway and highway tunnels
SP 128.13330.2016: Aluminium structures
SP 131.13330.2018: Construction Climatology
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 158.13330.2014: Buildings and rooms for health care facilities. Design rules
SP 16.13330.2011: Steel structures
SP 16.13330.2017: Steel structures
SP 17.13330.2017: The roofs
SP 20.13330.2016: Loads and actions
SP 22.13330.2016: Soil bases of buildings and structures
SP 225.1326000.2014: Station buildings, structures and devices
SP 228.1325800.2014: Buildings and structures of the investigative bodies. Rules of architectures design
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 230.1325800.2015: Construction enclosing of buildings characteristics of thermal conductive of inclusions
SP 237.1326000.2015: Rail transport infrastructure. General requirements
SP 238.1326000.2015: Railways
SP 24.13330.2011: Pile foundations
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 252.1325800.2016: Preschool educational institution buildings. Design rules
SP 253.1325800.2016: High-rise buildings utilities
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 262.1325800.2016: Container yard and terminal devices in industrial and transport manufacture. Terms of design and construction
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 274.1325800.2016: Bridges. Monitoring of technical condition (Structural health monitoring)
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 28.13330.2017: Protection against corrosion of construction
SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device
SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules
SP 294.1325800.2017: The construction of steel. Design rules
SP 296.1325800.2017: Buildings and structures. Accidental actions
SP 308.1325800.2017: Correctional institutions and centers of criminaly-executive system. Design rules
SP 315.1325800.2017: Thermal networks laid in a ground. Design rules
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 335.1325800.2017: Large-panel construction system. Design rules
SP 336.1325800.2017: Ventilation and conditioning systems. Operating rules
SP 339.1325800.2017: Designs from cellular concrete. Rules of design
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 342.1325800.2017: Protection of railway track and structures from the adverse natural phenomena. Rules of engineering and construction
SP 345.1325800.2017: Residential and public buildings. Thermal performance design
SP 347.1325800.2017: Internal heating, hot and cold water systems. Rules of operation
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 351.1325800.2017: Concrete and reinforced concrete designs from light concrete. Rules of design
SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction
SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules
SP 365.1325800.2017: Vertical cylindrical steel tanks for storage of oil products. Rules of work's production and acceptance under installation
SP 367.1325800.2017: Residential and public buildings. Daylighting design
SP 37.13330.2012: Industrial transport
SP 370.1325800.2017: Solar Shading Devices in Buildings. Design rules
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 376.1325800.2017: Residential buildings and facilities for temporary accommodation. Design rules
SP 380.1325800.2018: Fire station building. Desing rules
SP 381.1325800.2018: Retaining structures. Design rules
SP 387.1325800.2018: Spatial reinforced concrete structures of roofs and floors. Design requirements
SP 391.1325800.2017: Orthodox churches. Design rules
SP 396.1325800.2018: Streets and roads of settlements. Urban Planning Rules
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
SP 401.1325800.2018: Buildings and complexes are high-rise. Urban Planning Rules
SP 403.1325800.2018: Industrial territories. Rules for the design of landscaping
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 419.1325800.2018: Industrial buildings. Rules for the design of natural and combined lighting
SP 42.13330.2016: Urban development. Urban and rural planning and development
SP 426.1325800.2018: Structures front translucent buildings and structures. Design rules
SP 43.13330.2012: Structures for industrial installations
SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules
SP 476.1325800.2020: Territories of urban and rural settlements. Rules for the planning, development and improvement of residential neighborhoods
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 52.13330.2016: Daylighting and artificial lighting
SP 54.13330.2016: Multicompartment residential buildings
SP 55.13330.2016: Detached houses
SP 60.13330.2012: Heating, Ventilation and Air Conditioning (HVAC). Updated living edition of SNiP 41-01-2003
SP 60.13330.2016: Heating, ventilation and air conditioning
SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points
SP 7.13130.2013: Heating, ventilation and air conditioning. Fire Safety Requirements
SP 71.13330.2017: Insulation and finish coatings
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 82.13330.2016: Territory improvement
SP 85.13330.2016: Overhead contact lines of electrified transport
SP 88.13330.2014: The protective shelters of civil defense
SP 89.13330.2012: Combustion boiler systems of heating generation
SP 90.13330.2012: Thermal power stations
SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete
SP 97.13330.2016: Asbestos-cement constructions
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
Supplement to SP 63.13330: Toolkit. Calculation of reinforced concrete structures without prestressed reinforcement
TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.