imgalt

SP 15.13330.2012

СП 15.13330.2012

Masonry and reinforced masonry structures

Каменные и армокаменные конструкции

Status: Effective

The code of rules applies to the design of stone and armored structures of new and reconstructed buildings and structures for various purposes, operated in the climatic conditions of Russia. The standards set requirements for the design of stone and reinforced stone structures erected with the use of ceramic and silicate bricks, ceramic, silicate, concrete blocks and natural stones.

Cвод правил распространяется на проектирование каменных и армокаменных конструкций новых и реконструируемых зданий и сооружений различного назначения, эксплуатируемых в климатических условиях России. Нормы устанавливают требования к проектированию каменных и армокаменных конструкций, возводимых с применением керамического и силикатного кирпича, керамических, силикатных, бетонных блоков и природных камней.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Ministry of Regional Development of the Russian Federation, 12/29/2011

SKU: RUSS21103

Price: $495.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 5. Regulatory documents for building structures and products » к.51 Stone and reinforced structures »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » III Occupational safety requirements for production equipment and processes » 2 Safety requirements for certain types of work » 2.1 Operation of industrial buildings and structures »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.30 Masonry and brickwork »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.080 Structures of buildings » 91.080.30 Masonry and brickwork »


The Document is Replaced With:

SP 15.13330.2020: Stone and reinforced masonry structures SNiP II-2281 *

As a Replacement Of:

SP 15.13330.2010: Masonry and reinforced masonry structures

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 13579-78: Concrete blocks for walls of basements. Specifications

GOST 18105-2010: Concretes. Rules of control and norm of an assessment of quality.

GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.

GOST 24211-2008: Admixtures for concretes and mortars. General specifications

GOST 24992-2014: Masonry structures. Method of estimating bonding strength in masonry

GOST 25485-89: Cellular concretes. Specifications

GOST 28013-98: Mortars. General specifications

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 31189-2003: Dry building mixes. Classification

GOST 31189-2015: Dry building binder mixes. Classification

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 379-2015: Silicate bricks, stones, blocks and partition blocks. General specifications

GOST 379-95: Silicate brick and stones. Specifications

GOST 4.206-83: Quality rating system. Building. Stone wall materials. Nomenclature of characteristics

GOST 4.210-79: Quality ratings system. Building ceramic finishing and facing materials. Nomenclature of characteristics

GOST 4.219-81: Quality ratings system. Construction. Facing of stone materials and natural stone blocks. Nomenclature of characteristics

GOST 4.233-86: Product-quality index system. Building. Mortars. Index nomenclature

GOST 4001-2013: Wall stones of rocks. Specifications

GOST 4001-84: Natural rock wall blocks. Specifications

GOST 530-2007: Ceramic bricks and stones. General specifications

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 5802-86: Mortars. Test methods.

GOST 6133-99: Concrete wall stone. Specifications

GOST 8462-85: Wall materials. Methods for determination of ultimate compressive and bending strength

GOST 9479-2011: Blocks of rocks for the production of facing, architectural and construction, memorial and other products. Technical conditions

GOST 9479-98: Rock blocks used for manufacture of facing, architectural and building, memorial and other products. Specifications

GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications

GOST R 51263-99: Concrete with polysterene aggregates. Specifications

GOST R 53213-2008: Meat and meat products. Histological method of identification of plant protein additives

GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications

SP 131.13330.2018: Construction Climatology

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2018: Seismic building design code

SP 16.13330.2011: Steel structures

SP 16.13330.2017: Steel structures

SP 20.13330.2011: Loads and impacts

SP 20.13330.2016: Loads and actions

SP 22.13330.2011: Buildings and structures foundations

SP 22.13330.2016: Soil bases of buildings and structures

SP 23-101-2004: Design of thermal protection of buildings

SP 28.13330.2017: Protection against corrosion of construction

SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003

SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.

SP 63.13330.2018: Concrete and reinforced concrete structures. Key Points

SP 64.13330.2011: Wooden structures.

SP 64.13330.2017: Timber structures

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

The Document is Referenced By:

Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts

Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures

Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"

GOST R 42.4.01-2014: Civil defence. Civil defence constructions. Test methods

GOST R 52044-2003: Outer advertisement allocated alongside of highways and in territories of cities, towns and villages. General technical requirements concerning means of outer advertisement. Rules of allocation

GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements

GOST R 55567-2013: The order of the organization and conducting technical engineering studies on researches on objects of cultural heritage. Monuments of history and culture. General requirements

Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities

Methodical manual: Hotel building design

Methodical manual: Classification methods of information modeling tasks

Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation

Methodical manual: Building Design for Refrigerators

ODM 218.2.038-2014: Guidelines for the overhaul and reconstruction of retaining walls and retaining structures

ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways

ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads

ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes

Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020

Order 50/pr: On the approval of changes in the estimated norms

Order 902/pr: On the approval of SP 15.13330.2020 "SNiP II-22-81 * Stone and reinforced stone structures"

Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"

RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg

RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I

R-SSK 03-2016: Recommendations. Assessment of energy efficiency of buildings. Calculation and experimental control of standardized energy performance of buildings

SP 109.13330.2012: Cold storage units

SP 14.13330.2011: Construction in seismic regions.

SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)

SP 14.13330.2018: Seismic building design code

SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils

SP 22.13330.2016: Soil bases of buildings and structures

SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions

SP 265.1325800.2016: Manifold for engineering networks

SP 28.13330.2017: Protection against corrosion of construction

SP 303.1325800.2017: One-story industrial buildings. Operating rules

SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules

SP 307.1325800.2017: Buildings and premises for the storage and processing of agricultural products the rules of operation

SP 319.1325800.2017: Buildings and premises of medikal institutions. The rules of operation

SP 324.1325800.2017: Multi-storey industrial buildings. Operating rales

SP 325.1325800.2017: Buildings and construction. Rules for the production of demolition and recycling

SP 327.1325800.2017: Exterior masonry walls with brick veneer. Rules of design, operation and repair

SP 329.1325800.2017: Buildings and structures. Rules of inspection after the fire

SP 339.1325800.2017: Designs from cellular concrete. Rules of design

SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation

SP 355.1325800.2017: Frame construction prefabricated reinforced concrete one-storey industrial buildings. Rules of design

SP 356.1325800.2017: Prefabricated reinforced concrete frame constructions multi-storey buildings. Rules of design

SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects

SP 374.1325800.2018: Buildings and premises for the storage and processing of agricultural products. Accidental actions

SP 375.1325800.2017: Industrial chimneys. Design rules

SP 385.1325800.2018: Protection of buildings and structures against progressive collapse. Design code. Basic statements

SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems

SP 414.1325800.2018: Fixed formwork. Design rules

SP 427.1325800.2018: Stone and armored constructions. Amplification methods

SP 43.13330.2012: Structures for industrial installations

SP 434.1325800.2018: Polystyrene concrete enclosures. Design rules

SP 442.1325800.2019: Buildings and constructions. Earthquake Rating

SP 459.1325800.2019: Sports facilities for rowing sports. Design rules

SP 469.1325800.2019: The construction of livestock, poultry and animal husbandry enterprises. Terms of Use

SP 69.13330.2016: Underground excavations

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

SP 88.13330.2014: The protective shelters of civil defense

SP 91.13330.2012: Underground mine workings

SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete

ST-NP SRO SSK-02-2013: Evaluation of the energy performance of buildings. Monitoring compliance with the requirements of thermal protection of external building envelopes

STO NAAG 3.1-2013: Designs using autoclaved aerated concrete in the construction of buildings and structures. Design and Construction Rules

STO SSK 02-2016: Assessment of the energy efficiency of buildings during construction. Monitoring compliance with the requirements of thermal protection of external building envelopes and specific annual consumption of thermal energy

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!