SP 21.13330.2012
СП 21.13330.2012
|
|
Buildings and structures on undermined territories and slumping soils
Здания и сооружения на подрабатываемых территориях и просадочных грунтах
Status: Effective
The set of rules establishes requirements for the design of buildings and structures on underworked territories and subsiding soils. The requirements of this set of rules do not apply to the design of buildings and structures in seismic areas, as well as the design of hydraulic structures, roads, airfield pavements.
Cвод правил устанавливает требования к проектированию зданий и сооружений на подрабатываемых территориях и просадочных грунтах. Требования настоящего свода правил не распространяются на проектирование зданий и сооружений в сейсмических районах, а также на проектирование гидротехнических сооружений, дорог, аэродромных покрытий.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21104
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.22 Protection from dangerous geophysical effects »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
4 Ensuring environmental safety during subsoil use »
4.2 Use and protection of subsoil »
4.2.1 General requirements for use of subsoil »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.01 Structures of buildings in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
National standards »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.020 Earthworks. Excavation. Foundation construction. Underground work »
93.020.45 Foundations »
As a Replacement Of:
SP 21.13330.2010: Buildings and structures on undermined territories and slumping soils
The Document References:
Code 190-FZ: Town Planning Code of the Russian Federation
Federal Law 184-FZ: About technical regulation
GOST 12248-96: Soils. Laboratory methods for determining the strength and strain characteristics
GOST 12536-79: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 19912-2001: Soils. Field test methods by static and dynamic sounding
GOST 20276-99: S o i l s. Methods for field determination of strength and strain characteristics
GOST 20522-96: Soils. Statistical treatment of the test results
GOST 22733-2002: Soils. Laboratory method for determination of maximum density.
GOST 23061-90: Soils. Methods for radioisotope measurement of density and humidity
GOST 23161-2012: Soils. Method of laboratory determination of subsiding characteristics
GOST 23161-78: Soils. Laboratory method for determination of subsiding characteristics
GOST 23740-79: Soils. Methods of laboratory determination of organic composition
GOST 24143-80: Soils. Laboratory methods for determination of swelling and shrinking characteristics.
GOST 24846-81: Soils. Measuring methods of strains of structures and buildings bases
GOST 25100-95: Soils. Classification
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 30416-96: Soils. Laboratory testing. General requirements
GOST 30672-99: Soils. Field tests
GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition
GOST 5180-84: Soils. Laboratory methods for determination
GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
RD 07-113-96: Procedural Guidelines to the Approval of Measures to Protect Buildings, Structures and the Environment Against Hazards Associated with Mining Works
SanPiN 2.1.7.1287-03: Sanitary-epidemiologic requirements to soil quality
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SNiP 2.01.09-91: Buildings and constructions in undermine territories and collapsible soils
SNiP 22-01-95: Geophysics of hazard natural process
SP 103.13330.2012: Protection of mines against ground or surface water
SP 104.13330.2016: Ground protection from flooding and underflooding
SP 11-102-97: Engineering environmental site investigations for construction
SP 11-104-97: Collection of rules for engineering surveys for construction. Engineering-geodetic surveys for construction
SP 11-105-97: Engineering and geological survey for construction
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 14.13330.2011: Construction in seismic regions.
SP 15.13330.2012: Masonry and reinforced masonry structures
SP 16.13330.2011: Steel structures
SP 18.13330.2011: Master plans for industrial enterprises
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 22.13330.2016: Soil bases of buildings and structures
SP 23.13330.2011: Foundation of hydraulic structures
SP 24.13330.2011: Pile foundations
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 34-106-98: Underground storage of gas, oil and refined products. To replace VSN 51-5-85
SP 42.13330.2016: Urban development. Urban and rural planning and development
SP 45.13330.2012: Earth structures, bases and foundations
SP 47.13330.2016: Engineering survey for construction. Basic principles
SP 48.13330.2011: Organization of construction
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
The Document is Referenced By:
Amendment 5: Amendment to SP 20.13330.2016 SNiP 2.01.07-85* Loads and impacts
Amendment 5: Amendment to SP 22.13330.2016 SNiP 2.02.01-83* Foundations of Buildings and Structures
Amendment 5: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
GOST R 22.2.01-2015: Safety in emergency situations. Procedure for justification and recording of measures for civil defence, measures for prevention of natural and technological emergencies in developing of site planning projects
GOST R 22.2.13-2023: Safety in emergency situations. The procedure for developing a list of civil defense measures, measures to prevent emergencies of natural and man-made character. When designing capital construction facilities
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55989-2014: Trunk gas pipelines. Design standard for pressure over 10 MPa. Principal requirements
GOST R 57818-2017: Design standards of buildings and constructions for gas processing industry
GOST R 57955-2017: Buildings and facilities for oil and gas producing industries. Design standards
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 59626-2022: Public roads Special auxiliary structures and devices for bridge construction. Design rules. General requirements
ODM 218.2.092-2018: Recommendations for the use of sheet piles made of polymer materials in road construction
ODM 218.4.022-2015: Recommendations for conducting geotechnical monitoring of road tunnels under construction and operation
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
SP 120.13330.2012: Subway systems
SP 122.13330.2012: Railway and highway tunnels
SP 123.13330.2012: Underground storages of natural gas, oil and processing product
SP 22.13330.2016: Soil bases of buildings and structures
SP 225.1326000.2014: Station buildings, structures and devices
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 24.13330.2011: Pile foundations
SP 248.1325800.2016: Underground structures. Design rules
SP 248.1325800.2023: Underground structures. Design rules
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules
SP 296.1325800.2017: Buildings and structures. Accidental actions
SP 30.13330.2012: Domestic water supply and sewerage of buildings.
SP 30.13330.2016: Domestic water supply and drainage systems in buildings
SP 307.1325800.2017: Buildings and premises for the storage and processing of agricultural products the rules of operation
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 32.13330.2018: Sewerage. Outdoor networks and facilities
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 352.1325800.2017: Single-family houses with wooden frame. Rules of design and construction
SP 36.13330.2012: Trunk pipelines
SP 37.13330.2012: Industrial transport
SP 376.1325800.2017: Residential buildings and facilities for temporary accommodation. Design rules
SP 381.1325800.2018: Retaining structures. Design rules
SP 385.1325800.2018: Protection of buildings and structures against progressive collapse. Design code. Basic statements
SP 399.1325800.2018: External water supply and sewage systems made of polymer materials. Rules for design and installation
SP 42.13330.2016: Urban development. Urban and rural planning and development
SP 422.1325800.2018: Pipelines trunk and field for oil and gas. Construction of underwater crossings and work control
SP 425.1325800.2018: Engineering protection of territories from erosion processes. Design rules
SP 43.13330.2012: Structures for industrial installations
SP 446.1325800.2019: Engineering and geological surveys for construction. General rules for the production of work
SP 448.1325800.2019: Engineering surveys for construction in areas of subsidence. General requirements
SP 473.1325800.2019: Buildings, structures and complexes are underground. Urban planning rules
SP 482.1325800.2020: Engineering and hydrometeorological surveys for construction. General rules for the production of work
SP 509.1325800.2021: Prisons. Design rules
SP 54.13330.2016: Multicompartment residential buildings
SP 55.13330.2016: Detached houses
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 91.13330.2012: Underground mine workings
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.