SP 28.13330.2012
СП 28.13330.2012
|
|
Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
Защита строительных конструкций от коррозии
Status: Superseded in part. Recognized not to be applied by order of the Ministry of Construction of Russia No. 127
The set of rules applies to the design of corrosion protection of building structures (concrete, reinforced concrete, steel, aluminum, wood, stone and chrysotile cement). The set of rules does not apply to the design of protection of building structures from corrosion caused by radioactive substances, as well as to the design of structures made of special concrete (polymer concrete, acidic, heat-resistant concrete, etc.)
Свод правил распространяется на проектирование защиты от коррозии строительных конструкций (бетонных, железобетонных, стальных, алюминиевых, деревянных, каменных и хризотилцементных). Свод правил не распространяется на проектирование защиты строительных конструкций от коррозии, вызываемой радиоактивными веществами, а также на проектирование конструкций из специальных бетонов (полимербетонов, кислото-, жаростойких бетонов и т. п.)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21109
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.20 Basic provisions for reliability of building structures »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.40 Concrete structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.120 Protection of buildings, inside and out »
91.120.01 Protection of buildings inside and outside as a whole »
The Document is Replaced With:
SP 28.13330.2017: Protection against corrosion of construction
As a Replacement Of:
SP 28.13330.2010: Protection against corrosion of construction
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 10060-87: Concretes. Methods of frost resistance determination
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12871-93: Chrysotile asbestos - chrysotile. General specifications
GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 20022.1-90: Wood protection. Terms and definitions
GOST 21.513-83: System of building documents. Anticorrosive protection of building structures. Working drawings
GOST 2140-81: Visible defects, of wood. Classification, terms and definitions, methods of measurement
GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements
GOST 22266-94: Sulphate-resistant cements. Specifications
GOST 23486-79: Wall metal-faced sandwich panels with polyurethane foam thermal insulation. Specifications
GOST 23732-79: Water for concretes and mortars. Specifications
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24524-80: Metal-faced roof panels for industrial buildings with polyurethane foam thermal insulation. Specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 30515-97: Cements General specifications
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 31384-2008: Structural concrete protection against corrosion. General requirements
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 7372-79: Steel wire for ropes
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8736-93: Sand for construction works. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.048-89: Unified system of corrosion and ageing protection. Technical items. Methods of laboratory tests for mould resistance
GOST 9.304-87: Unified system of corrosion and ageing protection. Thermal sprayed coatings. General requirements and methods of control
GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.602-2005: Unified system of corrosion and ageing protection. Underground constructions. General requirements for corrosion protection
GOST 9.903-81: Unified system of corrosion and ageing protection. High-strength steels and alloys. Accelerated test methods for corrosion cracking
GOST 9463-88: Round wood products
GOST 969-91: Alumina and high alumina cements. Specifications
GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications
GOST 9825-73: Paint materials. Terms, definitions and designations
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 52146-2003: Cold rolled and cold rolled hot-galvanized sheet with polymer coating, prepainted by the continuous coil-coating process. Specifications
GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications
GOST R 52491-2005: Coating materials, used in building. General specifications
GOST R 52544-2006: Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 54257-2010: Reliability of the constructions and foundations. Basic principles and requirements
GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods
SNiP 12-03-2001: Labor safety in construction industry
SNiP 12-03-99: Occupational safety in construction part one. General safety requirements
SNiP 12-04-2002: Safety in construction. Part 2. Construction works
SNiP 2.03.11-85: Corrosion protection of buildings structures
SP 131.13330.2012: Building climatology
SP 2.13130.2012: Fire protection systems. Providing fire protection to facilities (with Amendment No 1)
SP 20.13330.2011: Loads and impacts
SP 47.13330.2012: Engineering survey for construction. Basic principles
SP 50.13330.2012: Buildings Heat Insulation. Updated living edition of SNiP 23-02-2003
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 64.13330.2011: Wooden structures.
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
The Document is Referenced By:
GOST 20054-2016: Concrete non-pressure pipes. Specifications
GOST 22131-2016: Concrete towers for railway high voltage signal line of autoblock. Technical requirements
GOST 23118-2012: Building steel structures. General specifications
GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications
GOST 24155-2016: High passengers platform reinforced concrete structures. Specifications
GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications
GOST 25592-2019: Ashes and slag mixtures of thermal power plants for concrete. Technical conditions
GOST 25628.1-2016: Reinforced concrete columns for single-storey industrial buildings. Specifications
GOST 25820-2014: Lightweight aggregates concretes. Specifications
GOST 26992-2016: Reinforced purloins for roofing in industrial and agricultural buildings. Specifications
GOST 28737-2016: Reinforced concrete foundation beams for buildings walls of industrial and agricultural enterprises. Specifications
GOST 30246-2016: Rolled thin-walled metal sheet with protective and decorative paintwork for building structures. Specification
GOST 31174-2017: Gates of metall. General specifications
GOST 31385-2016: Vertical cylindrical steel tanks for oil and oil-products. General specifications
GOST 31559-2012: Anchor supports. General pecifications
GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications
GOST 33807-2016: Safety of attractions. General requirements
GOST 34519-2019: Industrial chimney and ventilation pipes. Rules for the organization and production of work, monitoring of performance and requirements for the results of work
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST 8717-2016: Concrete and reinforced concrete steps. Specification
GOST 9818-2015: Reinforced concrete flights of steps and stair landings. General specifications
GOST R 52044-2003: Outer advertisement allocated alongside of highways and in territories of cities, towns and villages. General technical requirements concerning means of outer advertisement. Rules of allocation
GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements
GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55990-2014: Oil and gas-oil fields. Field pipelines. Design codes
GOST R 56400-2015: Petroleum and natural gas industries. Design and operation of offshore terminals of liquefied natural gas. General requirements
GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications
GOST R 56687-2015: Protection of concrete and reinforced-concrete construction from corrosion. Test method of sulphate resistance of concrete
GOST R 56703-2015: Dry building in-depth waterproofing capillary mixes based on cement binder. Specifications
GOST R 57054-2016: Mining equipment. Tubing cast iron. Sets of tubing rings. General specifications
GOST R 57410-2017: Unified system of corrosion and ageing protection. Corrosion protection of wares from non-ferrous metal alloys by diffusion treatment with zinc. General requirements for flow process
GOST R 57411-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of cast iron or steels by diffusion processing of zinc. General requirements to flow process
GOST R 57419-2017: Unified system of corrosion and ageing protection. Corrosion protection of parts made of super high and high-strength steels by diffusion treatment with zinc. General requirements for flow process
GOST R 57555-2017: Petroleum and natural gas industry. Offshore oil and gas field structures. Topsides structure
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58095.3-2018: Gas distribution systems. Requirements for gas consumption networks. Part 3. Metal-polymer gas pipelines
GOST R 58154-2018: Materials for substructure of hinged ventilated facade systems. General technical requirements
GOST R 58284-2018: Oil and gas industry. Marine field facilities and pipelines. General Requirements for Corrosion Protection
GOST R 58404-2019: Filling stations and complexes. Technical Operation Rules
GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design
GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design
GOST R 58752-2019: Means of conditioning. General specifications
GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines
MDS 12-65.2014: Project production work. Concreting of reinforced concrete structures of a building (structure) using concrete pumps
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.027-2012: Guidelines for the calculation and design of reinforced ground retaining walls on highways
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.059-2015: Recommendations for use on bridges, viaducts and tunnels of pedestrian decking (pavements) made of composite materials
ODM 218.2.066-2016: Guidelines for the use of anchor piles and micropiles as part of the engineering protection of roads
ODM 218.2.070-2016: Guidelines for the design, installation and maintenance of seismic protective devices of bridges on highways
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.2.093-2019: Guidelines for assessing the technical condition and confirming the effectiveness of the use of structures made of polymer composite materials on roads
ODM 218.3.046-2015: Recommendations about technology of repair of water throughput pipes with use of composite materials
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.3.066-2016: Guidelines for the design, installation and maintenance of spherical sliding parts of bridge structures on highways
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.8.008-2017: Guidelines for the use of treatment facilities made of polymer composite materials in the road sector
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements
RD EO 1.1.2.99.0867-2012: Methods for assessing the technical condition and residual life of building structures of nuclear power plants
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg
SP 100.13330.2016: The reclamation systems and construction
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 107.13330.2012: Greenhouses and hotbeds
SP 109.13330.2012: Cold storage units
SP 118.13330.2012: Public buildings and facilities
SP 120.13330.2012: Subway systems
SP 122.13330.2012: Railway and highway tunnels
SP 128.13330.2012: Aluminium structures
SP 128.13330.2016: Aluminium structures
SP 151.13330.2012: Engineering site investigations for nuclear power plants construction
SP 16.13330.2011: Steel structures
SP 16.13330.2017: Steel structures
SP 160.1325800.2014: Mixed-use buildings and complexes. Regulations of design
SP 163.1325800.2014: The designs with application of gypsum plasterboards and gypsum fiber sheets. Terms of design and installation
SP 21.13330.2012: Buildings and structures on undermined territories and slumping soils
SP 22.13330.2016: Soil bases of buildings and structures
SP 225.1326000.2014: Station buildings, structures and devices
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 245.1325800.2015: Corrosion protection of communication and utility lines and structures in the oil and gas industry. Production and work acceptance rules
SP 248.1325800.2016: Underground structures. Design rules
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 250.1325800.2016: Building and structures. Protection against groundwater
SP 251.1325800.2016: Educational institution buildings. Design rules
SP 255.1325800.2016: Buildings and structures. Operating rules. General provisions
SP 257.1325800.2016: Buildings of hotels. Regulations of design
SP 26.13330.2012: Foundations for machines with dynamic loads
SP 260.1325800.2016: Cold-formed thin-walled steel profile and galvanized corrugated plate constructions. Design rules
SP 262.1325800.2016: Container yard and terminal devices in industrial and transport manufacture. Terms of design and construction
SP 265.1325800.2016: Manifold for engineering networks
SP 266.1325800.2016: Composite steel and concrete structures. Design rules
SP 267.1325800.2016: High rise buildings and complexes. Design rules
SP 27.13330.2017: Concrete and reinforced concrete structures intended for the service in elevated and high temperatures
SP 277.1325800.2016: Costal protection constructions. Design rules
SP 28.13330.2017: Protection against corrosion of construction
SP 284.1325800.2016: Instructions for design, construction and redesign of field oil and gas pipelines
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 289.1325800.2017: Constructions cattle-breeding, poultry-breeding and beast-breeding. Design rules
SP 302.1325800.2017: Warehouses for emergency chemically hazardous substances. Rules of design
SP 304.1325800.2017: Construction of long-span buildings and structures. Operating rules
SP 307.1325800.2017: Buildings and premises for the storage and processing of agricultural products the rules of operation
SP 309.1325800.2017: Buildings of theaters and entertainment. Regulations of design
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 340.1325800.2017: Reinforced concrete and concrete structures of cooling towers. Design rules
SP 349.1325800.2017: Concrete and reinforced concrete structures. Rules of structural reinforcement and repair
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules
SP 36.13330.2012: Trunk pipelines
SP 363.1325800.2017: Translucent coating and lights of buildings and structures. Desing rules
SP 375.1325800.2017: Industrial chimneys. Design rules
SP 376.1325800.2017: Residential buildings and facilities for temporary accommodation. Design rules
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 41.13330.2012: Concrete and reinforced concrete hydraulic structures
SP 43.13330.2012: Structures for industrial installations
SP 45.13330.2012: Earth structures, bases and foundations
SP 54.13330.2016: Multicompartment residential buildings
SP 55.13330.2016: Detached houses
SP 63.13330.2012: Concrete and reinforced concrete structures. General provisions.
SP 64.13330.2011: Wooden structures.
SP 64.13330.2017: Timber structures
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 71.13330.2017: Insulation and finish coatings
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
SP 76.13330.2016: Electrical systems
SP 83.13330.2016: Industrial furnaces and brick chimneys
SP 85.13330.2016: Overhead contact lines of electrified transport
SP 86.13330.2014: Main (Trunk) pipelines
SP 90.13330.2012: Thermal power stations
SP 91.13330.2012: Underground mine workings
SP 92.13330.2012: Warehouses of dry mineral hestilizers and chamical means of protection plants
SP 95.13330.2016: Concrete and reinforced concrete structures made of dense calcium-silicate concrete
SP 96.13330.2016: Ferrocement structures
SP 97.13330.2016: Asbestos-cement constructions
Customers Who Viewed This Item Also Viewed:
 |
Safety valves of stream and hot-water boilers. Technical requirements
Language: English |
Steam and drinking water quality norms, water and chemical QC oversight and chemical control of steam stationary exhaust heat boiler for energy industry
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Steel pipe technology. Requirements for design and operation of explosive and chemically dangerous production
Language: English |
Loads and impacts
Language: English |
Pipeline valves. Methods of control and testing
Language: English |
Occupational safety standards system. Personal protective equipment against falls from a height. Rescue harness. General technical requirements. Test methods
Language: English |
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English |
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of welded joints and cladded surfaces
Language: English |
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Ultrasonic examination of austenitic steel welded joints
Language: English |
Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Radiographic examination
Language: English |
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Capillary control
Language: English |
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Visual and measuring control
Language: English |
Conformity assessment system in the field of atomic energy use. Conformity assessment in the form of control. Unified techniques. Eddy current control
Language: English |
Conformity assessment system in the field of atomic energy use. Joints of welded parts from steels of various structural classes for equipment and pipelines of nuclear power plants. The procedure for ultrasonic testing
Language: English |
Baby diapers. General specifications
Language: English |
Feeds for non-productive animals. General technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.