SP 33.13330.2012
СП 33.13330.2012
|
|
Steel pipelines strength analysis
Расчет на прочность стальных трубопроводов
Status: Effective
The set of rules applies to steel pipelines for various purposes with a nominal diameter of up to 1,400 mm, inclusive, intended for transporting liquid and gaseous media with pressures up to 10 MPa and temperatures ranging from minus 70 degrees Celsius to plus 450 degrees Celsius inclusive, and establishes requirements for calculating their strength and stability
Свод правил распространяется на стальные трубопроводы различного назначения условным диаметром до 1400 мм включительно, предназначенные для транспортирования жидких и газообразных сред давлением до 10 МПа и температурой от минус 70 градусов Цельсия до плюс 450 градусов Цельсия включительно, и устанавливает требования к расчету их на прочность и устойчивость
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
12/29/2011
SKU: RUSS21112
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.34 Main and field pipelines »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
Standards for pipe fittings (TPA) »
8. Piping valves (TPA) design »
8.2 Calculations »
8.2.1 Strength calculations »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.01 Pipelines and their components in general »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.10 Cast iron and steel pipes »
As a Replacement Of:
SP 33.13330.2010: Strength analysis of steel pipelines
The Document References:
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
Federal Law 184-FZ: About technical regulation
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 24856-2014: Pipeline valves. Terms and definitions
GOST R 52720-2007: Pipeline valves. Terms and definitions
Order 116: Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities where equipment operating under excessive pressure is used"
Order 116: On the approval of the Federal norms and rules in the field of industrial safety "Industrial safety rules for hazardous production facilities using equipment operating under excessive pressure" (as amended on December 12, 2017) (canceled from 01.01.2021 on the basis of the Decree of the Government of the Russian Federation dated 06.08.2020 N 1192)
PB 10-573-03: Series 17. Supervision documents in power industry. Issue 46. Construction and safe operation of steam and hot water pipelines rules.
SNiP 2.04.12-86: Steel pipelines strength analysis
SP 14.13330.2011: Construction in seismic regions.
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 16.13330.2011: Steel structures
SP 20.13330.2011: Loads and impacts
SP 24.13330.2011: Pile foundations
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
The Document is Referenced By:
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 58778-2019: Gas distribution systems. Gas distribution networks and gas consumption. Category 1a high pressure gas pipelines
GOST R 59932-2021: Uranium mining facilities by in-situ and heap leaching methods. Norms of technological design
GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 170/pr: On approval of Amendment 2 to SP 33.13330.2012 "SNiP 2.04.12-86 Calculation of the strength of steel pipelines
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
RMD 40-20-2013 Sankt-Peterburg: Designing and installation pipelines for water supply and sewage systems in Saint-Petersburg
RMD 40-20-2016 Sankt-Peterburg: Installation of water supply and drainage networks in St. Petersburg
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 281.1325800.2016: Boiler rooms integrated in building by general power to 360 kW. Rules of planning and device
SP 373.1325800.2018: Independent heat supply sources. Design rules
SP 402.1325800.2018: Residential buildings. Rules for the design of gas consumption systems
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 89.13330.2012: Combustion boiler systems of heating generation
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
