SP 35.13330.2011
СП 35.13330.2011
|
|
Bridges and pipes. Updated living edition of SNiP 2.05.03-84
Мосты и трубы
Status: Effective
The document applies to the design of new and reconstructed permanent bridges and pipes: on highways, including on-farm roads of agricultural and industrial enterprises, on streets and roads of settlements; on the 1520 mm gauge railways when passenger trains move at speeds up to 200 km
Документ распространяется на проектирование новых и реконструируемых постоянных мостовых сооружений и труб: на автомобильных дорогах, включая внутрихозяйственные дороги сельскохозяйственных и промышленных предприятий, на улицах и дорогах населенных пунктов; на железных дорогах колеи 1520 мм при движении пассажирских поездов со скоростями до 200 км/ч, линиях метрополитена и трамвая; на дорогах под совмещенное движение транспортных средств-автомобильных и поездов железных дорог, трамваев и метрополитена; на пешеходных дорогах
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of the Russian Federation,
12/28/2010
SKU: RUSS21114
The Product is Contained in the Following Classifiers:
Highways (Max) »
Design, construction, repair and maintenance of artificial structures on roads »
14. Reinforced concrete bridges »
14.2. Recommendations for calculation of reinforced concrete bridges »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
K.32 Transport facilities »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Metal structures »
Welding regulations »
Welding materials »
Welding regulations »
Admission Testing »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Mechanical Testing »
Welding regulations »
Heat treatment »
Welding regulations »
Defects »
Welding regulations »
Assembly devices »
Welding regulations »
Welding work »
Mechanized welding »
Welding regulations »
Welding work »
Automatic welding »
Welding regulations »
Welding work »
Surfacing »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Wire »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.040 Construction of bridges »
National standards »
93 CIVIL CONSTRUCTION »
93.040 Construction of bridges »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.060 Tunnel construction »
As a Replacement Of:
SNiP 2.05.03-84*: Bridges and pipes (Appendices 1-20)
SNiP 2.05.03-84*: Bridges and pipes (Appendices 21-29)
SP 35.13330.2010: Bridges and culverts
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10060.0-95: Methods for the determination of frost-resistance. General requirements
GOST 10060.1-95: Concretes, Basic Method For The Determination Of Frost-Resistance
GOST 10060.2-95: Concretes, rapid method for the determination of frost-resistance by repeated alternated freezing and thawing
GOST 10060.3-95: Concretes. Dilatometric rapid method for the determination of frost-resistance
GOST 10060-2012: Concretes. Methods for the determination of frost-resistance
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 1051-73: Calibrated quality steel
GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications
GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications
GOST 13726-97: Aluminium and aluminium alloys strips. Specifications
GOST 13840-68: Reinforced steel wire ropes 1x7
GOST 14098-2014: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14098-85: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, construction and dimensions
GOST 14098-91: Welded joints of reinforcement and inserts for reinforced concrete structures. Types, constructions and dimensions
GOST 14637-89: Thick sheet rolled stock of normal quality carbon steel
GOST 16483.10-73: Wood. Methods for determination of ultimate strength in compression parallel the grain
GOST 18899-73: Steel wire ropes. Locked conveying wire ropes. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 19292-73: Welded joints of embedded parts of prefabricated reinforced concrete structures. Contact and automatic welding by melting. Main types and structural elements
GOST 21437-95: Zinc antifriction alloys. Marks, technical requirements and test methods
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 23279-2012: Welded reinforcing meshes for reinforced concrete structures and products. General specifications.
GOST 23279-85: Welded reinforcing meshes for reinforced concrete structures and products. General specifications
GOST 23961-80: Construction, equipment and rolling stock clearance diagrams for USSR Metro
GOST 25100-2011: Soils. Classification
GOST 25100-95: Soils. Classification
GOST 26607-85: System of ensuring of geometrical parameters accuracy in construction. Functional tolerances
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 26775-97: Clearances of navigable bridge spans in the inland waterways. Norms and technical requirements
GOST 26804-2012: Metal road safety barriers. Specifications
GOST 26804-86: Metal road safety barriers. Specifications
GOST 2695-83: Sawn timber of leaf-bearing species
GOST 2770-74: Goal-tar oil for wood impregnation. Specifications
GOST 27751-2014: Reliability for constructions and foundations. General principles
GOST 27751-88: Reliability of the constructions and the foundations. Principal rules of the calculations
GOST 30244-94: Building materials. Methods for combustibility test
GOST 30247.0-94: Elements of building constructions. Fire-resistance test methods. General requirements
GOST 30247.1-94: Elements of building constructions. Fire-resistance test methods. Load bearing and separating constructions
GOST 3064-80: One lay rope type ТК construction 1x37 (1+6+12+18). Dimensions
GOST 3067-88: Two lay steel rope type ТК construction 6x19 (1+6+12)+1x19 (1+6+12). Dimensions
GOST 3090-73: Steel wire ropes. Locked conveying wire rope with one layer of Z-wire and type ТК cope. Dimensions
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 380-2005: Common quality carbon steel. Grades
GOST 4028-63: Building nails. Construction and dimensions
GOST 4543-71: Structural alloyed steel
GOST 4784-97: Aluminium and wrought aluminium alloys. Grades
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 7348-81: Carbon steel wire for reinforcement of prestressed concrete constructions. Specifications
GOST 7675-73: Steel wire ropes. Locked conveying wire rope with one layer of V-shaped wire, one layer of Z-wire and type ТК cope. Dimensions
GOST 7676-73: Steel wire ropes. Locked conveying wire rope with two layers of V-shaped wire, one layer of Z-wire and type TK core. Dimensions
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8486-86: Coniferous sawn timber. Specifications
GOST 8509-93: Hot-rolled steel equal-leg angles. Dimensions
GOST 8510-86: Hot-rolled steel unequal-leg angles. Dimensions
GOST 8639-82: Square steel tubes. Range
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST 9128-97: Asphaltic concrete Mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST 9238-2013: Construction and rolling stock clearance diagrams
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 9462-88: Round timber of broadleaf sorts
GOST 9463-88: Round wood products
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST 977-88: Steel castings. General specifications
GOST R 22.1.12-2005: Safety in emergencies. Structured system for monitoring and control of building. Construction engineering equipment. General requirements
GOST R 52289-2004: Traffic control devices. Rules of application of traffic signs, markings, traffic lights, guardrails and delineators
GOST R 52398-2005: Classification of automobile roads. General parameters and requirements
GOST R 52399-2005: Geometric elements of automobile roads
GOST R 52606-2006: Traffic control devices. Classification of barriers
GOST R 52607-2006: Traffic control devices. Roadside barriers. General technical requirements
GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications
GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.
GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.
GOST R 52648-2006: Machines and equipment for timber floating. Safety requirements. Control methods of safety requirements
GOST R 52748-2007: Automobile roads of the general use. Standard loads, loading systems and clearance approaches
GOST R 52766-2007: Automobile roads of general use. Road facilities. General requirements
GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications
GOST R 53772-2010: Reinforced steel low-relaxation 7-wire strands. Specifications
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
ODM 218.2.001-2009: Recommendations for the design and construction of culverts of metal corrugated structures on public roads, taking into account regional conditions (road-climatic zones)
ODM 218.4.003-2009: Recommendations for joining metal beams with a monolithic slab by means of continuous comb stops in steel concrete bridges
SN 200-62: Specifications for the design of railway, road and urban bridges and pipes
SNiP 2.05.11-83: Access Roads Operated by Farm Сooperatives, Non-Family Farm Corporations, and Other Agricultural Enterprises and Organizations
SNiP 2.06.04-82: Loads and effects on water-development works (wave, ice and from ships)
SNiP 22-02-2003: Engineering protection of territories, buildings and facilities against hazardous geological processes. Basic provisions
SNiP 23-01-99: Building climatology
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 32-01-95: Railroads with 1520-mm Track. Construction Norms and Regulations
SP 11-110-99: Code of standards on design and construction Designer’s supervision over construction of building and facilities
SP 119.13330.2012: Railways of 1520 mm
SP 131.13330.2012: Building climatology
SP 131.13330.2018: Construction Climatology
SP 14.13330.2011: Construction in seismic regions.
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 159.1325800.2014: Steel and concrete composite bridge decks on highways. Rules of analysis
SP 16.13330.2011: Steel structures
SP 16.13330.2017: Steel structures
SP 20.13330.2011: Loads and impacts
SP 22.13330.2011: Buildings and structures foundations
SP 24.13330.2011: Pile foundations
SP 25.13330.2010: Soil bases and foundations on permafrost soils
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 274.1325800.2016: Bridges. Monitoring of technical condition (Structural health monitoring)
SP 28.13330.2010: Protection against corrosion of construction
SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85
SP 295.1325800.2017: Concrete structures reinforced with fibre-reinforced polymer bars. Design rules
SP 297.1325800.2017: Fiber reinforced concrete structures and precast products with non-steel fibers. Design rules
SP 32-101-95: Design and installation of the foundations of bridges in areas with permafrost
SP 33-101-2003: Determination of design hydrological performance
SP 34.13330.2010: Automobile roads
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 37.13330.2010: Industrial transport
SP 37.13330.2012: Industrial transport
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 42.13330.2011: Urban development. Urban and rural planning and development
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules
SP 51.13330.2011: Noise protection and rooms acoustics.
SP 52-101-2003: Concrete and reinforced concrete structures without prestressing
SP 52-102-2004: Pre-stressed concrete structures
SP 53-101-98: Manufacturing and quality control of steel structures for construction
SP 63.13330.2010: Concrete and won concrete construction Design requirements
SP 64.13330.2011: Wooden structures.
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
SP 98.13330.2012: Tram and trolleybus lines
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
The Document is Referenced By:
Amendment 3: Amendment to SP 16.13330.2017 "SNiP II-23-81* Steel Structures"
Amendment 3: Amendment to SP 4.13130.2013 Fire protection systems. Restriction of fire propagation at the objects of protection. Requirements for volume planning and structural solutions
GOST 20054-2016: Concrete non-pressure pipes. Specifications
GOST 22000-2023: Concrete and reinforced concrete pipes. Types and main parameters
GOST 24547-2016: Reinforced concrete culvert sections under highway and railway embankments. Specifications
GOST 31384-2017: Protection of concrete and reinforced concrete structures against corrosion. General technical requirements
GOST 33119-2014: Polymer composites constructions for foot-bridges. Specifications
GOST 6482-2011: Ferroconcrete nonpressure pipes. Technical specifications.
GOST R 54928-2012: Pedestrian bridges for polymer composites. Specifications
GOST R 55260.1.2-2012: Hydro power plants. Part 1-2. Hydrotechnical power station. Safety requirements foundations
GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements
GOST R 55596-2013: District heating systems. Standard for the stress and seismic analysis
GOST R 57076-2016: Field test centers for the railway rolling stock and the infrastructure elements. Technical requirements
GOST R 58094-2018: Gas distribution systems. Gas distribution networks. Service life assessment in design of outdoor steel gas pipelines
GOST R 58137-2018: Automobile roads of general use. Guidelines for risk assessment during the life cycle
GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions
GOST R 58367-2019: Arrangement of oil fields on land. Technological design
GOST R 58654-2019: Automobile roads for general use. Spiral corrugated metal pipes. Specifications
GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation
GOST R 58947-2020: Automobile roads for general use. Ecodukes. Requirements for placement and arrangement
GOST R 59432-2021: Automobile roads for general use. Accessibility for people with disabilities and other people with limited mobility. General requirements
GOST R 59489-2021: Automobile roads for general use. Bridge structures. Rules for combining split beam spans into temperature-continuous ones on a reinforced concrete slab of the carriageway
GOST R 59618-2021: Public roads for motorways. Bridge structures. Rules for inspection and testing methods
GOST R 59622-2021: Public roads for motor vehicles. Bridge structures. Design of reinforced concrete elements
GOST R 59623-2021: Public roads. Bridge structures. Design of steel elements
GOST R 59624-2021: Public roads. Bridge structures. Design of steel reinforced concrete elements
GOST R 59625-2022: Public roads. Bridge structures. Rules for calculation and confirmation of aeroelastic stability
GOST R 59626-2022: Public roads Special auxiliary structures and devices for bridge construction. Design rules. General requirements
GOST R 59788-2021: Roads for public road use. Bridge structures. Rules for calculation of steel and reinforced concrete spans
GOST R 59892-2021: Corrugated metal non-linear products for transport structures. Technical specifications
GOST R 70073-2022: Public roads. Bridges and road pipes. Methods for determining geometric and physical parameters
GOST R 70312-2022: Public roads. Bridge structures. Rules for design of interfaces with approach embankments
GOST R 70313-2022: Public roads. Bridge structures. Rules for the arrangement of staircases and operating facilities
GOST R 70623-2023: Field pipelines. Pipelines from flexible polymer reinforced pipes. Rules of design, installation and operation
GOST R 70716-2023: Roads and streets. Safety of pedestrian traffic. General requirements
GOST R 70772-2023: Public roads. Bridge structures. Rules for repair of expansion joints and drainage devices of prefabricated and prefabricated-monolithic reinforced concrete spans
Letter 48836-DV/08: On current codes of practice that prohibit the use of used pipes
Letter Obshhestva s ogranichennoj otvetstvennost'ju "Normativno-Ispy: About application of p.5.71 SP 35.13330.2011 "Bridges and pipes".
Methodical manual: Building Design for Refrigerators
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
ODM 218.2.007-2011: Guidelines for the design of measures to ensure the access of persons with disabilities to road facilities
ODM 218.2.014-2011: Guidelines for the use of steel-fiber-concrete in the repair of bridge structures
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.2.025-2012: Expansion joints of automobile bridges
ODM 218.2.036-2013: Guidelines for the design, repair, maintenance and operation of ferries and floating bridges
ODM 218.2.040-2014: Guidelines for the evaluation of the aerodynamic characteristics of the cross sections of bridges
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.2.049-2015: Recommendations for the design and construction of gabion structures on highways
ODM 218.2.051-2015: Recommendations for the design and design of anti-tailing structures on highways
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.055-2015: Recommendations for the calculation of drainage systems for road structures
ODM 218.2.057-2015: Recommendations for use on bridges for drainage trays made of polymer composite materials
ODM 218.2.058-2019: Recommendations on the use of composite materials in the construction of bridge structures and pedestrian bridges
ODM 218.2.070-2016: Guidelines for the design, installation and maintenance of seismic protective devices of bridges on highways
ODM 218.2.082-2017: Guidelines for conducting hydraulic calculations of small ISSO on roads
ODM 218.2.087-2017: Recommendations for the design and construction of culverts of spiral-wavy metal corrugated pipes
ODM 218.2.090-2017: Guidelines for the use of tubular welded grooves in the construction of roads
ODM 218.2.093-2019: Guidelines for assessing the technical condition and confirming the effectiveness of the use of structures made of polymer composite materials on roads
ODM 218.2.097-2019: Recommendations on the use of geo-environmental protection technologies in the design, construction and operation of roads
ODM 218.2.110-2020: Methodical recommendations for hydraulic calculations of spiral metal corrugated pipes
ODM 218.3.014-2011: Evaluation method for technical condition of bridges and automobile roads.
ODM 218.3.027-2013: Recommendations for the use of fabric composite materials in the repair of reinforced concrete structures of bridge structures
ODM 218.3.042-2014: Recommendations for determining the parameters and assignment of categories of defects in assessing the technical condition of bridges on highways
ODM 218.3.045-2015: Recommendations on the construction of seamless sprayed bridge waterproofing from composite materials on reinforced concrete and steel orthotropic slabs of span structures of bridge structures, as well as on other building structures made of steel and rei
ODM 218.3.061-2015: Recommendations on the use of composite structures and materials with flammability parameters "NG" for transport infrastructure facilities
ODM 218.3.062-2019: The use of robotic telediagnostic systems for the inspection of culverts and drainage structures on roads
ODM 218.3.066-2016: Guidelines for the design, installation and maintenance of spherical sliding parts of bridge structures on highways
ODM 218.3.083-2016: Guidelines for trenchless laying of road culvert pipes
ODM 218.3.089-2019: Guidelines for the experimental use of prestressing reinforcement made of high-strength composite materials for reinforcing reinforced concrete bridge structures
ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
ODM 218.3.1.002-2020: Typical technical solutions for embankments on pile foundations with a flexible grillage made of geosynthetic materials
ODM 218.3.110-2019: Rules for the development of road maintenance projects
ODM 218.4.023-2015: Guidelines for assessing the effectiveness of the construction, reconstruction, overhaul and repair of roads
ODM 218.4.025-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. a common part
ODM 218.4.026-2016: Recommendations for determining the carrying capacity of operated bridges on public roads. Concrete and reinforced concrete structures
ODM 218.4.027-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Metal and steel-reinforced concrete structures
ODM 218.4.028-2016: Recommendations for determining the carrying capacity of existing bridges on public roads. Support parts, supports and foundations
ODM 218.4.029-2016: Recommendations for determining the carrying capacity of operated bridge structures on public roads. Determination of the load-carrying capacity of wooden bridges
ODM 218.5.009-2008: Technology for magnetic diagnostics of prestressed reinforcement and assessment of the technical condition of reinforced concrete beams of bridge structures
ODM 218.6.030-2017: Recommendations for establishing and warranty periods and service life of structural elements of bridge structures
ODM 218.6.034-2019: Recommendations for designing motorway backups on approaches to large cities
ODM 218.9.015-2016: Recommendations for the organization of automated monitoring of the state of the artificial structures of highways as part of intelligent transport systems
Order 1042/pr: On approval of methodological recommendations for the development of norms and rules for the improvement of territories of municipalities
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
Order 50/pr: The plan for the development and approval of codes of practice and updating of previously approved building codes and regulations, codes for 2020
Order 50/pr: On the approval of changes in the estimated norms
Order 707/pr: On approval of the methodology for determining the cost of work on preparation of design documentation
Order 891/pr: On approval of Amendment No. 3 to SP 35.13330.2011 "SNiP 2.05.03-84 * Bridges and pipes"
Order 909/pr: On approval of the Plan for development and approval of sets of rules and actualization of previously approved sets of rules for 2022.
Ordinance 1198r: Instruction on crossing railway lines of JSCo "Russian Railways" with utilities
OST 32.72-97: Reinforced concrete slabs without ballast bridge bed for metal superstructures of railway bridges. General specifications
PNST 353-2019: General automobile roads. Expansion joints with rubber compensator spans for road bridges. General specifications
POT RZhD-4100612-TsP-TsDRP-022-2013: Rules for labor protection, environmental, industrial and fire safety during maintenance and repair of infrastructure facilities of the railway complex of JSC Russian Railways
Resolution 1101: On the approval of the Regulations on federal state control (supervision) in the field of road safety and the invalidation of some acts of the Government of the Russian Federation and certain provisions of some acts of the Government of the Russian Federation
Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
RMD 30-23-2014 Sankt-Peterburg: Guidance on the design of engineering preparation of the territory, engineering networks and improvement of residential and public business neighborhoods
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
SP 100.13330.2016: The reclamation systems and construction
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 119.13330.2012: Railways of 1520 mm
SP 119.13330.2017: Railways with 1520 mm track
SP 120.13330.2012: Subway systems
SP 122.13330.2012: Railway and highway tunnels
SP 122.13330.2023: Railroad and road tunnels
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 14.13330.2018: Seismic building design code
SP 159.1325800.2014: Steel and concrete composite bridge decks on highways. Rules of analysis
SP 16.13330.2011: Steel structures
SP 16.13330.2017: Steel structures
SP 19.13330.2011: Master plans for farming enterprises
SP 22.13330.2011: Buildings and structures foundations
SP 22.13330.2016: Soil bases of buildings and structures
SP 227.1326000.2014: Intersection of railway lines with transport lines and engineering networks
SP 229.1325800.2014: Reinforced concrete structures of underground and utility systems. Protection against corrosion
SP 237.1326000.2015: Rail transport infrastructure. General requirements
SP 238.1326000.2015: Railways
SP 24.13330.2011: Pile foundations
SP 243.1326000.2015: Design and construction of low-volume roads
SP 248.1325800.2016: Underground structures. Design rules
SP 248.1325800.2023: Underground structures. Design rules
SP 249.1325800.2016: Design and construction of underground utilities by closed and cut-and-cover methods
SP 25.13330.2012: Soil bases and foundations on permafrost soils
SP 25.13330.2020: Bases and foundations on permafrost soil SNiP 2.02.04-88
SP 259.1325800.2016: Bridges in dense urban aveas Design rules
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 268.1325800.2016: Transport structures in seismic zones. Specifications for earthquake-resistant design
SP 269.1325800.2016: Transport structures in seismic zones. Rules for initial seismity detailing and seismic microzoning
SP 270.1325800.2016: Transport facilities in seismic area. Rules for evaluation of highway and railway structures seismic damages in far and inaccessible zones
SP 274.1325800.2016: Bridges. Monitoring of technical condition (Structural health monitoring)
SP 28.13330.2017: Protection against corrosion of construction
SP 285.1325800.2016: Football stadiums. Desing rules
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 288.1325800.2016: Forest roads. Rules of design and construction
SP 292.1325800.2017: Buildings and structures on tsunami hazardous areas. Regulations of design
SP 296.1325800.2017: Buildings and structures. Accidental actions
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 31.13330.2021: Water supply. External networks and structures SNiP 2.04.02-84*
SP 313.1325800.2017: Roads in eternal permafrost regions. Rules of design and construction
SP 318.1325800.2017: Forest roads. Service regulation
SP 33.13330.2012: Steel pipelines strength analysis
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 343.1325800.2017: Constructions of the industrial enterprises. The rules of operation
SP 350.1326000.2018: Norms for technological design of sea ports
SP 354.1325800.2017: Foundations of bridge supports in areas of permafrost soils. Design and construction rules
SP 361.1325800.2017: Buildings and constructions. Protective measures in the zone of influence of construction of underground objects
SP 37.13330.2012: Industrial transport
SP 381.1325800.2018: Retaining structures. Design rules
SP 396.1325800.2018: Streets and roads of settlements. Urban Planning Rules
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 407.1325800.2018: Excavation. Rules for the performance of work by hydromechanization
SP 425.1325800.2018: Engineering protection of territories from erosion processes. Design rules
SP 43.13330.2012: Structures for industrial installations
SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone
SP 443.1325800.2019: Bridges with aluminum alloy structures. Design rules
SP 445.1325800.2018: Culverts and drainage systems in permafrost areas. Design rules
SP 445.1325800.2023: Culverts and drainage systems in permafrost areas. Design rules
SP 447.1325800.2019: Railways in permafrost areas. Design Fundamentals
SP 453.1325800.2019: Artificial high-speed railway lines. Design and construction rules
SP 459.1325800.2019: Sports facilities for rowing sports. Design rules
SP 46.13330.2012: Bridges and pipes
SP 461.1325800.2019: Biotransitions at transport infrastructure facilities. Design rules
SP 461.1325800.2019: Biotransitions at transport infrastructure facilities. Design rules
SP 465.1325800.2019: Buildings and constructions. Subway vibration protection. Design rules
SP 472.1325800.2019: Armor-based systems of bridges and retaining walls on highways. Design rules
SP 58.13330.2012: Hydraulic Structures. Basic statements
SP 59.13330.2020: Accessibility of buildings and structures for people with limited mobility SNiP 35-01-2001
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
SP 79.13330.2012: Bridges and culverts. Rules of examination and test
SP 84.13330.2016: Tramways
SP 90.13330.2012: Thermal power stations
SP 98.13330.2012: Tram and trolleybus lines
SP 98.13330.2018: Tram and trolley lines
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
ST RK 1413-2005: Motor roads and railways. Requirements for road bed designing
ST RK 1857-2008: Motor roads. Requirements at designing of supporting walls
ST RK 1858-2008: Bridgeworks and culverts on motor roads. Requirements at designing of concrete and reinforced concrete structures
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.