SP 38.13330.2012
СП 38.13330.2012
|
|
Loads and impacts on Hydraulic structures (from wave, ice and ships)
Нагрузки и воздействия на гидротехнические сооружения (волновые, ледовые и от судов)
Status: Superseded in part. By Order of the Ministry of Construction of Russia No. 531
Standards apply to the design of newly built, reconstruction and repair of existing river and marine hydraulic structures.
Нормы распространяются на проектирование вновь строящихся, реконструкцию и ремонт существующих речных и морских гидротехнических сооружений.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21116
The Product is Contained in the Following Classifiers:
Power industry »
21. Buildings. Facilities »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.2 Hydraulic structures for industries »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.1 Operation of industrial buildings and structures »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.01 Structures of buildings in general »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.140 Construction of waterways, ports and dams »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
National standards »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
The Document is Replaced With:
SP 38.13330.2018: Loads and impacts on hydraulic structures (wave, ice and from ships)
As a Replacement Of:
SP 38.13330.2010: Loads and impacts on Hydraulic structures (from wave, ice and ships)
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 19185-73: Hydraulic engineering. Basic concepts. Terms and definitions
RD 31.33.10-87: Recommended Practice for Accounting for Hydrometeorological Conditions in the Design of Wharves with Insufficient Protection from Wave Action
SP 11-103-97: Code of practice. Engineering hydrometeorological survey for construction
SP 11-114-2004: Engineering surveys on the continental shelf for the construction offshore oil and gas installations
SP 20.13330.2011: Loads and impacts
SP 32-103-97: Design of offshore protection structures
SP 58.13330.2012: Hydraulic Structures. Basic statements
The Document is Referenced By:
GOST R 55561-2013: Inland water transport. Dock and harbour hydraulic structure. Safety requirements
GOST R 55615.3-2013: Renewable power engineering. Tidal power plants. Part 3. Sea hydraulic structures. Requirements for loads and actions
GOST R 56353-2015: Soils. Laboratory methods for determination of soil dynamic properties
GOST R 57113-2016: Inland water transport. Cargo transfer complexes and passenger terminals of river ports. Harbour aquatorium and roads. Safety requirements
GOST R 58213-2018: Oil and gas industry. Arctic operations. Onshore Logistics Operations
GOST R 58283-2018: Oil and gas industry. Arctic operations. Accounting for ice loads in the design of offshore platforms
GOST R 58744.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls thin-walled (sheet pile). Basic requirements for calculation and design
GOST R 58745.1-2019: Inland water transport. Infrastructure facilities. Embankments, retaining walls semi-gravity and gravity. Basic requirements for calculation and design
Methodical manual: Refinement of initial seismicity and seismic micro-zoning of sections of transport facilities
Methodical manual: Hotel building design
Methodical manual: Classification methods of information modeling tasks
Methodical manual: Base data for the design of building structures on the tsunami-dangerous coasts of the Russian Federation
Methodical manual: Building Design for Refrigerators
MRR 3.2.55-13: The method of determining the cost of design work on the overhaul of reservoirs, carried out with the involvement of the budget of the city of Moscow
MRR 7.6-16: Reservoirs
ODM 218.2.049-2015: Recommendations for the design and construction of gabion structures on highways
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.3.038-2015: Recommendations for the design and construction of coastal road structures
ODM 218.3.106-2018: The use of flexible concrete surface coatings to protect and strengthen roads
PNST 493-2020: Inland waterway transport. Infrastructure facilities. Embankments, thin-walled retaining walls (sheet piling). Features of the calculation and design of various structures
PNST 494-2020: Inland waterway transport. Infrastructure facilities. Embankments, retaining walls are semi-gravitational and gravitational. Features of the calculation and design of various gravity structures
PNST 55-2015: Underground utilities. Determination of location and depth with non-destructive methods
PVKM 79: Instructions for the design of railway temporary and short-term bridges and pipes
RMD 32-24-2015 Sankt-Peterburg: Design of artificial structures at transport facilities in St. Petersburg
SP 100.13330.2016: The reclamation systems and construction
SP 101.13330.2012: Retaining walls, navigation locks, fish passing and fish protection facilities
SP 126.13330.2017: Geodetic works in building
SP 238.1326000.2015: Railways
SP 261.1325800.2016: Industrial railroad. Rules of engineering and construction
SP 277.1325800.2016: Costal protection constructions. Design rules
SP 287.1325800.2016: Marine berthing facilities. Rules of design and construction
SP 290.1325800.2016: Water passageways hydraulic structures (discharge sluices, emptying and dewatering conduits). Rules of projecting
SP 292.1325800.2017: Buildings and structures on tsunami hazardous areas. Regulations of design
SP 296.1325800.2017: Buildings and structures. Accidental actions
SP 31.13330.2012: Water supply. Pipelines and portable water treatment plants
SP 32.13330.2012: Sewerage. Pipelines and wastewater treatment plants
SP 35.13330.2011: Bridges and pipes. Updated living edition of SNiP 2.05.03-84
SP 350.1326000.2018: Norms for technological design of sea ports
SP 369.1325800.2017: Fixed offshore platforms. Design principles
SP 377.1325800.2017: Buildings in the ports. The rules of exploitation
SP 378.1325800.2017: Offshore pipelines. Design and construction rules
SP 38.13330.2018: Loads and impacts on hydraulic structures (wave, ice and from ships)
SP 389.1326000.2018: Technical operation of seaport infrastructure facilities
SP 39.13330.2012: Rock fill dams
SP 398.1325800.2018: Quays. Urban Planning Rules
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 66.13330.2011: Designing, building of pressure head networks of water supply and water removal with application of high-strength pipes from pigiron with spherical graphite
ST RK 1413-2005: Motor roads and railways. Requirements for road bed designing
Customers Who Viewed This Item Also Viewed:
|
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.