SP 39.13330.2012
СП 39.13330.2012
|
|
Rock fill dams
Плотины из грунтовых материалов
Status: Effective
The set of rules applies to the design of new and reconstruction of existing dams (or pressure dams) from soil materials (earth bulk and alluvial, stone-earthen and rock-throwing), which are part of the systems of various types of construction (energy, hydropower, land-reclamation).
Свод правил распространяется на проектирование новых и реконструкцию существующих плотин (или напорных дамб) из грунтовых материалов (земляных насыпных и намывных, каменно-земляных и каменно-набросных), входящих в состав систем различных видов строительства (энергетического, гидроэнергетического, мелиоративного).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Ministry of Regional Development of Russia,
12/29/2011
SKU: RUSS21117
The Product is Contained in the Following Classifiers:
Power industry »
21. Buildings. Facilities »
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
3. Normative documents on urban planning, buildings and constructions »
к.33 Hydrotechnical and meliorative constructions »
PromExpert »
SECTION IV. INDUSTRIAL SAFETY »
II Industrial safety requirements for operation of a hazardous production facility »
4 Safety requirements for hydraulic structures »
4.3 Hydraulic structures of power facilities »
ISO classifier »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
National standards »
93 CIVIL CONSTRUCTION »
93.160 Construction of hydraulic facilities »
As a Replacement Of:
SP 39.13330.2010: Rock fill dams
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12071-2014: Soils. Sampling, packing, transportation and keeping of samples
GOST 12536-2014: Soils. Methods of laboratory granulometric (grain-size) and microaggregate distribution
GOST 17.1.3.13-86: Hydrosphere. General requirements for surface water protection against pollution
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 19185-73: Hydraulic engineering. Basic concepts. Terms and definitions
GOST 20522-2012: Soils. Methods of statistical treatment of test results
GOST 25100-2011: Soils. Classification
GOST 25584-2016: Soils. Laboratory methods for determination of filtration factor
GOST 26263-84: Soils. Laboratory method for determining thermal conductivity of frozen soils
GOST 28498-90: Liquid-in-glass thermometers
GOST 30416-2012: Soils. Laboratory testing. General requirements
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5180-2015: Soils. Methods for laboratory determination of physical characteristics
GOST 8.423-81: State system for ensuring the uniformity of measurements. Mechanical stop-watches. Methods and means for verification
GOST EN 13416-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Rules for sampling
GOST EN 1928-2011: Roofing and hydraulic-insulating flexible bitumen-based and polymeric (thermoplastic or elastomer) materials. Method for determination of watertightness
GOST ISO 9862-2014: Geosynthetics. Sampling and preparation of test specimens
GOST R 51268-99: Scissors. General specifications
GOST R 52608-2006: Geotextile materials. Methods of water permeability determination
GOST R 53225-2008: Geotextiles. Terms and definitions
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R ISO 10320-2014: Geotextiles and geotextile-related products. Identification on site
Order 635/18: On approval of the Code of Rules "SNiP 2.06.05-84* "Dams from ground materials"
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
SP 23.13330.2011: Foundation of hydraulic structures
SP 23.13330.2018: Foundations of hydraulic structures
SP 38.13330.2012: Loads and impacts on Hydraulic structures (from wave, ice and ships)
SP 38.13330.2018: Loads and impacts on hydraulic structures (wave, ice and from ships)
SP 58.13330.2012: Hydraulic Structures. Basic statements
The Document is Referenced By:
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 55260.1.4-2012: Hydro power plants. Part 1-4. Hydraulic engineering constructions of hydroelectric power stations. The general requirements to the organization and realization of monitoring
GOST R 57793-2017: United power system and isolated power systems. Hydraulic and pumped storage power stations. Hydraulic engineering structures. Monitoring and assessment of technical condition during operation. Main provisions
GOST R 58719-2019: Unified energy system and isolated energy systems. Hydraulic power plants. Waterworks. Control and measuring systems and equipment. Terms of creation. Norms and requirements
GOST R 59873-2021: Hydro power stations. Methodology of determination of safety criteria for declared hydraulic structures
GOST R 70519-2022: Tailings ponds of hydrometallurgical plants of uranium mining enterprises. Design standards
GOST R 70566-2022: Land reclamation systems and structures. Rules of inspection and monitoring of technical condition
GOST R 70574-2022: Materials geosynthetic bentonite rolls with geotextile base for waterproofing. Testing methods for water permeability and resistance to brine
MRR 3.2.55-13: The method of determining the cost of design work on the overhaul of reservoirs, carried out with the involvement of the budget of the city of Moscow
MRR 7.6-16: Reservoirs
ODM 218.2.052-2015: Design and construction of anti-mudflow facilities for the protection of roads
ODM 218.2.078-2016: Guidelines for the selection of the structure for strengthening the slopes of the road bed of public roads
ODM 218.3.094-2017: Recommendations on engineering and geological surveys and design of engineering protection structures on road sections with the development of slope processes
Order 1042/pr: On approval of methodological recommendations for the development of norms and rules for the improvement of territories of municipalities
Order 1112: On Amending Order No. 687 of the Federal Agency for Technical Regulation and Metrology of April 2, 2020
Order 1247: On Amending the Order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687 "On Approval of the list of documents in the field of standardization, as a result of the application of which on a voluntary basis ensures compliance with the requirements of the Federal Law of December 30, 2009 N 384-FZ "Technical Regulations on the Safety of Buildings and Structures".
Order 1653: On amending the order of the Federal Agency for Technical Regulation and Metrology of April 2, 2020 N 687
Order 635/18: On approval of the Code of Rules "SNiP 2.06.05-84* "Dams from ground materials"
Resolution 815: On the approval of the list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures" July 2020 N 985
Resolution 985: The list of national standards and sets of rules (parts of such standards and sets of rules), as a result of which, on a mandatory basis, compliance with the requirements of the Federal Law "Technical Regulations on the Safety of Buildings and Structures"
SP 100.13330.2016: The reclamation systems and construction
SP 103.13330.2012: Protection of mines against ground or surface water
SP 104.13330.2016: Ground protection from flooding and underflooding
SP 116.13330.2012: Engineering protection of territories, buildings and structures from dangerous geological processes. Basic principles.
SP 122.13330.2023: Railroad and road tunnels
SP 14.13330.2014: Construction in seismic regions SNIP II-7-81 (revision SP 14.13330.2011)
SP 14.13330.2018: Seismic building design code
SP 277.1325800.2016: Costal protection constructions. Design rules
SP 290.1325800.2016: Water passageways hydraulic structures (discharge sluices, emptying and dewatering conduits). Rules of projecting
SP 34.13330.2012: Automobile roads. Updated living edition of SNIP 2.05.02-85
SP 358.1325800.2017: Hydraulic structures. Rules of design and construction in seismic-prone regions
SP 40.13330.2012: Concrete and reinforced concrete dams
SP 407.1325800.2018: Excavation. Rules for the performance of work by hydromechanization
SP 416.1325800.2018: Engineering protection of the shores of the tidal seas. Design rules
SP 45.13330.2012: Earth structures, bases and foundations
SP 45.13330.2017: Earthworks, grounds and footings
SP 80.13330.2016: River hydraulie engineering facilities
SP 90.13330.2012: Thermal power stations
SP 99.13330.2016: On-farm roads in the collective and state farms and other agricultural enterprises and organizations
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.